Upper limit allowed must be greater than Lower limit allowed Quantification limit must be greater than Detection limit There is already a default typification for this combination of product type, matrix and analysis This typification (ID: %(typification)s) should be the default The value of line "%(line)s" is outside the allowed limits Analysis description must be unique The leaving date cannot be lower than entry date End date should not be greater than the current date in "%(analysis)s" The analysis "%(analysis)s" is already included You can not delete method "%(method)s" because is typificated There is already a default device for this analysis on this laboratory Only one version can be active for each technical scope Work year "%(first)s" and "%(second)s" overlap. No work year defined for "%(date)s". There is already a default origin for this use Measurement Result UCL (M+3D) UWL (M+2D) UPL (M+D) CL (M) LPL (M-D) LWL (M-2D) LCL (M-3D) CV (%) There is already a default department for this user There is no entry sequence for the work year "%(work_year)s". You can not delete entry "%(entry)s" because it is not in draft state You can not confirm entry "%(entry)s" because has not fractions Missing contacts in entry "%(entry)s" The analysis marked with * are not covered by the Accreditation. Do not forget to load the translations for the %(lang)s language. There is already a default suspension reason You can not delete the analysis detail because its fraction is confirmed Cannot redefine the value of "%(variable)s" Unexpected character found: "%(character)s" at index %(index)s Division by 0 (occured at index %(index)s) No closing parenthesis found at character %(index)s Unrecognized variable: "%(variable)s" Found an extra period in a number at character %(index)s Unexpected end found Expecting to find a number at character %(index)s but instead there is a "%(character)s" There is already a default laboratory for this analysis This Device is physically in another Laboratory The end date cannot be lower than start date in "%(analysis)s" The analysis "%(analysis)s" is already accepted The analysis is not reported The analysis is annulled The analysis has not End date The analysis has not Result / Converted result The Converted result modifier is invalid The Result modifier is invalid The Converted result / Converted result modifier is invalid The analysis is already reported (%(report)s) OK OK* Out of Range Acceptable / Factor: %(factor)s - CV: %(cv)s Unacceptable / Factor: %(factor)s - CV: %(cv)s There is already a address with invoice type Wizard already executed. Please wait. The planification must have a start date The start date must be after "%(date)s" (Creation date of Sample "%(sample)s") The following fractions have not a responsible technician: %(fractions)s Planification "%(planification)s" is still waiting for processing You can not delete planification "%(planification)s" because it is not in draft or pre-planned state You can not copy planifications There is no default entry control for this work year Party "%(party)s" does not have a Zone configured There is no Control fraction type configured Missing concentration level for this control type There is no RM fraction type configured There is no BMZ fraction type configured Missing default configuration for RM fraction type Missing default configuration for BMZ fraction type The analysis "%(analysis)s" is not typified for product type "%(product_type)s" and matrix "%(matrix)s" There is no BRE fraction type configured Missing default configuration for BRE fraction type There is no MRT fraction type configured Missing default configuration for MRT fraction type There is no COI fraction type configured There is no MRC fraction type configured There is no SLA fraction type configured Missing default configuration for COI fraction type Missing default configuration for MRC fraction type Missing default configuration for SLA fraction type There is no results report sequence for the work year "%(work_year)s". Missing PyPDF2 module The report has not details to print No details cached (%(language)s) Build failed You can not delete a detail that is not in draft state Please, select only one report to print This report is annulled Supplants the Results Report N° %(report)s < LoQ = %(loq)s (LoD = %(detection_limit)s %(initial_unit)s) (LoD = %(detection_limit)s) (U± %(res)s %(initial_unit)s) U = Uncertainty Negative Positive Detected Not detected Presence Absence Uncertainty for the analysis covered by the Accreditation is available. (Expressed at the concentration of the received sample) (Expressed at %(concentration)s° Brix) (Expressed at %(concentration)s) Expressed at %(concentration)s %% Alcohol Expressed at %(concentration)s Expressed at %(concentration)s Bx Expressed at dry matter LoQ= Limit of Quantitation. If the Detection Limit is reported, Result <LoQ indicates that the detected value is between LoD (Limit of Detection) and LoQ (Limit of Quantitation). LoD= Limit of Detection. min: %(min)s max: %(max)s Elements results are reported without recovery correction. NOT SPECIFIED BY THE CLIENT Not done by the company There is no service sequence for the work year "%(work_year)s". You can not delete service "%(service)s" because its fraction is confirmed The analysis "%(analysis)s" is assigned more than once to the fraction "%(fraction)s" Missing "Fraction product" on Lims configuration You can not delete fraction "%(fraction)s" because it is confirmed You can not confirm fraction "%(fraction)s" because has not services You can not confirm fraction because is not yet divided Remember to load the report grouper in the analyzes There is no sample sequence for the work year "%(work_year)s". The label "%(label)s" is already present in another sample You can not delete sample "%(sample)s" because its entry is not in draft state Reverse counter sample storage to enter the service Countersamples Storage Countersamples Storage Reversion Countersamples Discharge Fractions Discharge Fractions Discharge Reversion Invalid field: %(field)s Invalid value: %(value)s This typification already exists Product type code must be unique Matrix code must be unique This objective description already exists Analysis code must be unique Analysis family code must be unique This record already exists Suspension reason code must be unique Laboratory code must be unique Professional code must be unique The party is already associated to a professional Method code must be unique Repeated record Device code must be unique The From and To fields must be numeric Device type code must be unique This lims user is already assigned to a party Professionals cannot be repeated The method already exists for this professional Zone code must be unique Variety code must be unique Packaging integrity code must be unique Packaging type code must be unique Fraction type code must be unique UoM symbol must be unique Concentration level code must be unique You can not exceed the quantity of %(qty)s analysis Cache already exists for the report Not all analysis share the same UoM You are going to %(action)s FROM: * Product type: %(product_type)s * Matrix: %(matrix)s * Analysis: %(analysis)s * Method: %(method)s TO: * Product types: * Matrices: Missing typification for additional analysis: %(qty)s Typifications were created %(qty)s Typifications already existed Missing typification for additional analysis "%(additional)s" of analysis "%(analysis)s". The analysis "%(analysis)s" is already reported The target Results Report does not have a valid state You cannot copy service "%(analysis)s" because the assigned laboratory (%(laboratory)s) is not the default one.