cbmk/script/roms

469 lines
15 KiB
Text
Raw Normal View History

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
# SPDX-FileCopyrightText: 2014-2016,2020,2021,2023,2024 Leah Rowe <leah@libreboot.org>
# SPDX-FileCopyrightText: 2021,2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# SPDX-FileCopyrightText: 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com>
set -u -e
. "include/option.sh"
seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
grub_background="background1280x800.png"
grubelf="elf/grub/grub.elf"
cfgsdir="config/coreboot"
pico_src_dir="src/pico-serprog"
pico_sdk_dir="src/pico-sdk"
stm32_src_dir="src/stm32-vserprog"
# Disable all payloads by default.
# target.cfg files have to specifically enable [a] payload(s)
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
pv="payload_grub payload_grub_withseabios payload_seabios payload_memtest t"
pv="${pv} payload_seabios_withgrub payload_seabios_grubonly payload_uboot memtest_bin"
v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release"
v="${v} grub_timeout ubdir board grub_scan_disk uboot_config"
eval "$(setvars "n" ${pv} serprog)"
build/roms: report status when building images export CBMK_VERSION_TYPE=x x can be: stable, unstable in target.cfg files, specify: status=x x can be: stable, unstable, broken, untested if unset, cbmk defaults to "unknown" if CBMK_VERSION_TYPE is set, no confirmation is asked if the given target matches what's set (but what's set in that environmental variable can only be stable or unstable) if CBMK_RELEASE="y", no confirmation is asked, unless the target is something other than stable/unstable "unstable" means it works, but has a few non-breaking bugs, e.g. broken s3 on dell e6400 whereas, if raminit regularly fails or it is so absolutely unreliable as to be unusable, then the board should be declared "broken" untested means: it has not been tested With this change, it should now be easier to track whether a given board is tested, in preparation for releases. When working on trees/boards, status can be set for targets. Also: in the board directory, you can add a "warn.txt" file which will display a message. For example, if a board has a particular quirk to watch out for, write that there. The message will be printed during the build process, to stdout. If status is anything *other* than stable, or it is unstable but CBMK_VERSION_TYPE is not set to "unstable", and not building a release, a confirmation is passed. If the board is not specified as stable or unstable, during a release build, the build is skipped and the ROM is not provided in that release; this is in *addition* to release="n" or release="y" that can be set in target.cfg, which will skip the release build for that target if "n" Signed-off-by: Leah Rowe <info@minifree.org>
2024-04-26 20:41:00 +02:00
eval "$(setvars "" ${v} boards _displaymode _payload _keyboard all targets \
serprog_boards_dir)"
main()
{
while [ $# -gt 0 ]; do
case ${1} in
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
list)
x_ items config/coreboot
return 0 ;;
serprog)
serprog="y"
shift 1; break ;;
-d) _displaymode="${2}" ;;
-p) _payload="${2}" ;;
-k) _keyboard="${2}" ;;
*)
[ "${1}" = "all" ] && all="y"
boards="${1} ${boards}"
shift && continue ;;
esac
shift 2
done
if [ "$serprog" = "y" ]; then
handle_serprog $@
return 0
else
[ "${all}" != "y" ] || boards=$(items config/coreboot) || \
$err "Cannot generate list of boards for building"
for x in ${boards}; do
handle_coreboot_target "$x"
done
fi
bstr="directories"
[ "$xbmk_release" = "y" ] && bstr="tarballs"
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
[ -z "${targets}" ] && $err "No ROM images were compiled"
printf "\nROM images available in these %s:\n" "$bstr"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
eval "printf \"${targets}\""
printf "^^ ROM images available in these %s.\n\n" "$bstr"
[ "$xbmk_release" = "y" ] && \
printf "Always run the inject command on release images!\n"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
printf "DO NOT flash images from elf/ - please use bin/ instead.\n"
}
handle_serprog()
{
[ -z "${1+x}" ] && $err "bad command. Check $projectname docs."
[ "$1" != "rp2040" ] && [ "$1" != "stm32" ] && $err "bad command"
if [ "${1}" = "rp2040" ]; then
serprog_boards_dir=${pico_sdk_dir}/src/boards/include/boards
[ -d "$pico_src_dir" ] || x_ ./update trees -f "pico-serprog"
elif [ "${1}" = "stm32" ]; then
serprog_boards_dir=${stm32_src_dir}/boards
[ -d "$stm32_src_dir" ] || x_ ./update trees -f "stm32-vserprog"
fi
x_ mkdir -p "bin/serprog_${1}"
if [ $# -gt 1 ] && [ "${2}" = "list" ]; then
print_serprog_boards ${serprog_boards_dir}
return 0
elif [ $# -gt 1 ]; then
build_${1}_rom "${2}"
else
printf "Building all serprog targets\n"
list_serprog_boards "${serprog_boards_dir}" | \
while read -r board; do
build_${1}_rom "${board}"
done
fi
[ "$xbmk_release" = "y" ] && mktar_release "bin/serprog_$1"; return 0
}
build_rp2040_rom()
{
board=${1}
printf "Building pico-serprog for %s\n" "${board}"
x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$pico_sdk_dir" \
-B "${pico_src_dir}/build" "${pico_src_dir}"
x_ cmake --build "${pico_src_dir}/build"
x_ mv ${pico_src_dir}/build/pico_serprog.uf2 \
bin/serprog_rp2040/serprog_${board}.uf2
printf "output to bin/serprog_rp2040/serprog_%s.uf2\n" "$board"
}
build_stm32_rom()
{
board=${1}
printf "Building stm32-vserprog for %s\n" "${board}"
x_ make -C $stm32_src_dir libopencm3-just-make BOARD=$board
x_ make -C ${stm32_src_dir} BOARD=${board}
x_ mv ${stm32_src_dir}/stm32-vserprog.hex \
bin/serprog_stm32/serprog_${board}.hex
printf "output to bin/serprog_stm32/serprog_%s.hex\n" "$board"
}
print_serprog_boards()
{
printf "Available boards:\n"
list_serprog_boards "${1}"
}
list_serprog_boards()
{
basename -a -s .h "${1}/"*.h || $err "list_boards $1: can't list boards"
}
handle_coreboot_target()
{
eval "$(setvars "n" ${pv}) $(setvars "" ${v})"
grub_background="background1280x800.png"
board="$1"
configure_target
[ "$board" = "$tree" ] && return 0
if [ "$xbmk_release" = "y" ] && [ "$release" = "n" ]; then
printf "Target '%s' disabled for release.\n" "$board"
return 0
fi
build_payloads
build_target_mainboard
[ -d "bin/${board}" ] || return 0
[ "$xbmk_release" = "y" ] || targets="* bin/${board}\n${targets}"
[ "$xbmk_release" = "y" ] || return 0
targets="* bin/${relname}_$board.tar.xz\n$targets"
mktar_release "bin/$board"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
configure_target()
{
targetdir="${cfgsdir}/${board}"
[ -f "${targetdir}/target.cfg" ] || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "Missing target.cfg for target: ${board}"
# Override the above defaults using target.cfg
. "${targetdir}/target.cfg"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ -z "${grub_scan_disk}" ] && grub_scan_disk="both"
[ "$grub_scan_disk" != "both" ] && [ "$grub_scan_disk" != "ata" ] \
&& [ "${grub_scan_disk}" != "ahci" ] && \
grub_scan_disk="both"
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
[ -z "$tree" ] && $err "$board: tree not defined"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "${payload_memtest}" != "y" ] && payload_memtest="n"
[ "${payload_grub_withseabios}" = "y" ] && payload_grub="y"
[ "${payload_grub_withseabios}" = "y" ] && \
eval "$(setvars "y" payload_seabios payload_seabios_withgrub)"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "$payload_seabios_withgrub" = "y" ] && payload_seabios="y"
[ "$payload_seabios_grubonly" = "y" ] && payload_seabios="y"
[ "$payload_seabios_grubonly" = "y" ] && payload_seabios_withgrub="y"
# The reverse logic must not be applied. If SeaBIOS-with-GRUB works,
# that doesn't mean GRUB-withSeaBIOS will. For example, the board
# might have a graphics card whose vga rom coreboot doesn't execute
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "$payload_grub" != "y" ] && [ "$payload_seabios" != "y" ] && \
[ "${payload_uboot}" != "y" ] && ! check_defconfig "$targetdir" \
&& $err "target '$board' defines no payload"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "$payload_uboot" != "n" ] && [ "$payload_uboot" != "y" ] && \
payload_uboot="n"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "$payload_uboot" = "y" ] && [ -z "$uboot_config" ] && \
uboot_config="default"
# Override all payload directives with cmdline args
[ -z "${_payload}" ] && return 0
printf "setting payload to: %s\n" "${_payload}"
eval "$(setvars "n" payload_grub payload_memtest payload_seabios \
payload_seabios_withgrub payload_uboot payload_grub_withseabios \
payload_seabios_grubonly)"
eval "payload_${_payload}=y"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
build_payloads()
{
romdir="bin/${board}"
cbdir="src/coreboot/${board}"
[ "${board}" = "${tree}" ] || cbdir="src/coreboot/${tree}"
cbfstool="cbutils/${tree}/cbfstool"
cbrom="${cbdir}/build/coreboot.rom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree
memtest_bin="memtest86plus/build64/memtest.bin"
[ "${payload_memtest}" != "y" ] || [ -f "src/${memtest_bin}" ] || \
x_ ./update trees -b memtest86plus
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios
if [ "$payload_grub" = "y" ] || [ "$payload_seabios_withgrub" = "y" ] \
|| [ "$payload_seabios_grubonly" = "y" ]; then build_grub_payload
fi
[ "${payload_uboot}" = "y" ] && build_uboot_payload; return 0
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
build_grub_payload()
{
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ mkdir -p elf/grub
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
for keymapfile in config/grub/keymap/*.gkb; do
[ -f "${keymapfile}" ] || continue
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
keymaps="${keymaps} ${keymapfile}"
done
GRUB: insert only 1 keymap per board, in cbfs There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-18 00:54:53 +01:00
[ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "build_grub_payload: $_keyboard layout not defined"
[ -n "$_keyboard" ] && keymaps="${grubcfgsdir}/keymap/${_keyboard}.gkb"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ -f "$grubelf" ] && return 0
[ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub
./src/grub/grub-mkstandalone \
--grub-mkimage="src/grub/grub-mkimage" \
-O i386-coreboot \
-o "elf/grub/grub.elf" \
-d "src/grub/grub-core/" \
--fonts= --themes= --locales= \
--modules="${grub_modules}" \
--install-modules="${grub_install_modules}" \
"/boot/grub/grub.cfg=${grubcfgsdir}/config/grub_memdisk.cfg" \
"/boot/grub/grub_default.cfg=${grubcfgsdir}/config/grub.cfg" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "could not generate grub.elf"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
build_uboot_payload()
{
x_ ./update trees -b u-boot ${board}
ubdir="elf/u-boot/${board}/${uboot_config}"
ubootelf="${ubdir}/u-boot.elf"
[ ! -f "${ubootelf}" ] && [ -f "${ubdir}/u-boot" ] && \
ubootelf="${ubdir}/u-boot"
[ -f "${ubootelf}" ] && return 0
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "Can't find u-boot build for board, $board";
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
build_target_mainboard()
{
x_ rm -Rf "${romdir}"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
for x in "normal" "vgarom" "libgfxinit"; do
initmode="${x}"
hmode="vesafb"
[ "${initmode}" = "vgarom" ] || hmode="corebootfb"
modes="${hmode} txtmode"
[ -z "${_displaymode}" ] || modes="${_displaymode}"
for y in ${modes}; do
displaymode="${y}"
[ "${initmode}" = "normal" ] && \
[ "$displaymode" != "txtmode" ] && continue
cbcfg="${targetdir}/config/${initmode}_${displaymode}"
[ "${initmode}" = "normal" ] && cbcfg="${cbcfg%_*}"
build_roms "${cbcfg}"
x_ rm -f "$cbrom"
done
done
}
# Main ROM building function. This calls all other functions below
build_roms()
{
cbcfg="${1}"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
if [ ! -f "${cbcfg}" ]; then
printf "'%s' does not exist. Skipping build for %s %s %s\n" \
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
"$cbcfg" "$board" "$displaymode" "$initmode" 1>&2
return 0
fi
x_ ./update trees -b coreboot ${board}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
_cbrom="elf/coreboot_nopayload_DO_NOT_FLASH"
_cbrom="${_cbrom}/${board}/${initmode}_${displaymode}"
[ "${initmode}" = "normal" ] && \
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
_cbrom="${_cbrom%"_${displaymode}"}"
_cbrom="${_cbrom}/coreboot.rom"
cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "${_cbrom}" "${cbrom}"
[ "${payload_memtest}" != "y" ] || \
x_ "${cbfstool}" "${cbrom}" add-payload \
-f "src/${memtest_bin}" -n img/memtest -c lzma
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
[ "${payload_seabios}" = "y" ] && build_seabios_roms
[ "$payload_grub" != "y" ] || x_ build_grub_roms "$cbrom" "grub"
[ "${payload_uboot}" = "y" ] || return 0
x_ cp "${_cbrom}" "${cbrom}"
build_uboot_roms
}
build_seabios_roms()
{
if [ "${payload_seabios_withgrub}" = "y" ]; then
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
t=$(mktemp -t coreboot_rom.XXXXXXXXXX)
x_ cp "${cbrom}" "${t}"
x_ build_grub_roms "${t}" "seabios_withgrub"
else
t=$(mkSeabiosRom "${cbrom}" "fallback/payload") || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "build_seabios_roms: cannot build tmprom"
newrom="${romdir}/seabios_${board}_${initmode}_${displaymode}"
[ "${initmode}" = "normal" ] && newrom="${romdir}/seabios" \
&& newrom="${newrom}_${board}_${initmode}"
x_ moverom "${t}" "${newrom}.rom"
fi
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ rm -f "${t}"
}
# Make separate ROM images with GRUB payload, for each supported keymap
build_grub_roms()
{
tmprom="${1}"
payload1="${2}" # allow values: grub, seabios, seabios_withgrub
grub_cbfs="fallback/payload"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
if [ "$payload1" = "grub" ] && [ "$payload_grub_withseabios" = "y" ]
then
_tmpmvrom=$(mkSeabiosRom "$tmprom" "seabios.elf") || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "build_grub_roms 1 $board: can't build tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ mv "$_tmpmvrom" "$tmprom"
elif [ "$payload1" != "grub" ] && [ "$payload_seabios_withgrub" = "y" ]
then
grub_cbfs="img/grub2"
_tmpmvrom=$(mkSeabiosRom "$tmprom" fallback/payload) || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "build_grub_roms 2 $board: can't build tmprom"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ mv "$_tmpmvrom" "$tmprom"
fi
# we only need insert grub.elf once, for each coreboot config:
x_ "${cbfstool}" "${tmprom}" add-payload -f "${grubelf}" \
-n ${grub_cbfs} -c lzma
# we only need insert background.png once, for each coreboot config:
if [ "${displaymode}" = "vesafb" ] || \
[ "${displaymode}" = "corebootfb" ]; then
backgroundfile="config/grub/background/${grub_background}"
"${cbfstool}" "${tmprom}" add -f ${backgroundfile} \
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
-n background.png -t raw || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "insert background, ${backgroundfile}"
fi
tmpcfg=$(mktemp -t coreboot_rom.XXXXXXXXXX)
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" >"$tmpcfg" \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
|| $err "set grub_scandisk, $grub_scan_disk, $tmpcfg"
[ "${grub_scan_disk}" = "both" ] || \
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ "$cbfstool" "$tmprom" add -f "$tmpcfg" -n scan.cfg -t raw
printf "set timeout=%s\n" "${grub_timeout}" > "${tmpcfg}" || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "set timeout, ${grub_timeout}, ${tmpcfg}"
[ -z "${grub_timeout}" ] || x_ "${cbfstool}" "${tmprom}" add \
-f "${tmpcfg}" -n timeout.cfg -t raw
x_ rm -f "${tmpcfg}"
for keymapfile in ${keymaps}; do
[ -f "${keymapfile}" ] || continue
keymap="${keymapfile##*/}"
keymap="${keymap%.gkb}"
GRUB: insert only 1 keymap per board, in cbfs There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-18 00:54:53 +01:00
tmpgrubrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
x_ cp "${tmprom}" "${tmpgrubrom}"
x_ "$cbfstool" "$tmpgrubrom" add -f "$keymapfile" \
-n keymap.gkb -t raw
newrom="${romdir}/${payload1}_${board}_${initmode}_"
newrom="${newrom}${displaymode}_${keymap}.rom"
[ "${initmode}" = "normal" ] && \
newrom="${romdir}/${payload1}_${board}_" && \
newrom="${newrom}${initmode}_${keymap}.rom"
x_ moverom "${tmpgrubrom}" "${newrom}"
if [ "${payload_seabios_grubonly}" = "y" ]; then
x_ "$cbfstool" "$tmpgrubrom" add \
-f "config/grub/bootorder" -n bootorder -t raw
x_ moverom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom"
x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \
-n etc/show-boot-menu
x_ moverom "$tmpgrubrom" "${newrom%.rom}_grubonly.rom"
fi
x_ rm -f "${tmpgrubrom}"
done
}
# make a rom in /tmp/ and then print the path of that ROM
mkSeabiosRom() {
_cbrom="${1}" # rom to insert seabios in. will not be touched
# (a tmpfile will be made instead)
_seabios_cbfs_path="${2}" # e.g. fallback/payload
_seabioself="elf/seabios/default/${initmode}/bios.bin.elf"
tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
x_ cp "${_cbrom}" "${tmprom}"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ "$cbfstool" "$tmprom" add-payload -f "$_seabioself" \
-n "${_seabios_cbfs_path}" -c lzma
x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
z="2"; [ "$initmode" = "vgarom" ] && z="0"
x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec
x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
[ "$initmode" != "libgfxinit" ] || \
x_ "$cbfstool" "$tmprom" add -f "$seavgabiosrom" \
-n vgaroms/seavgabios.bin -t raw
printf "%s\n" "${tmprom}"
}
build_uboot_roms()
{
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
tmprom=$(mkUbootRom "${cbrom}" "fallback/payload") || \
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
$err "build_uboot_roms $board: could not create tmprom"
newrom="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom"
x_ moverom "${tmprom}" "${newrom}"
x_ rm -f "${tmprom}"
}
# make a rom in /tmp/ and then print the path of that ROM
mkUbootRom() {
_cbrom="${1}"
_uboot_cbfs_path="${2}"
_ubdir="elf/u-boot/${board}/${uboot_config}"
_ubootelf="${_ubdir}/u-boot.elf"
[ -f "${_ubootelf}" ] || _ubootelf="${_ubdir}/u-boot"
safer, simpler error handling in cbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in cbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. cbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from cbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <info@minifree.org>
2024-03-27 02:19:39 +01:00
[ -f "$_ubootelf" ] || $err "mkUbootRom: $board: cant find u-boot"
tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
x_ cp "${_cbrom}" "${tmprom}"
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
x_ "$cbfstool" "$tmprom" add-payload -f "$_ubootelf" \
-n "${_uboot_cbfs_path}" -c lzma
printf "%s\n" "${tmprom}"
}
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
moverom()
{
rebase cbmk 9429287 per lbmk c4d90087..f5b04fa5 cbmk 9429287 is the present canoeboot revision, on this day, two commits after canoeboot 20231107 the cbmk revision was based on lbmk c4d90087, but lbmk has developed a lot since, right up to f5b04fa5. lbmk c4d90087 was four commits after libreboot 20231106 this patch brings cbmk up to date, versus lbmk f5b04fa5, which is 135 commits after libreboot 20231106 (not 4) therefore, the next canoeboot release shall import lbmk changes made *after* lbmk revision f5b04fa5. good day! In English (the above is for my reference, next time I make a new canoeboot release): This imports all of the numerous improvements from Libreboot, sans the non-FSDG-compliant changes. You can find a full list of such changes in the audit4 page: https://libreboot.org/news/audit4.html A full canoeboot-ised changelog will be available in the next canoeboot release, with these and subsequent changes. Most notable here is the update to the new GRUB 2.12 release (instead of 2.12-rc1), and the improvements Riku made to pico-serprog. And the build system improvements from lbmk, such as improved, more generic cmake and autoconf handling. Canoeboot-specific changes: I also tweaked the deblob logic, to make it less error-prone. The new design changes imported into cbmk (based on latest lbmk) somewhat broke the deblob logic; it was constantly reminding the user that blobs.list was missing for coreboot, at config/coreboot/blobs.list - coreboot is a multi-tree project in both cbmk and lbmk, and the deblob logic was tuned for single/multi, but was treating coreboot as both. for simplicity, i removed the check for whether blobs.list is present. this means that the operator must ensure that these files are present, in any given revision, where they are required on a given set of projects (and the files are all present, in this update to cbmk) Also of note: the grub.cfg improvements are included in this cbmk update. The improved grub.cfg can find grub/syslinux configs by default, not just grub anymore, also finds extlinux, and will also find them on EFI System Partition - in addition, UEFI-based install media is also more robust; although cbmk doesn't provide UEFI configurations on x86, our GRUB palyoad does still need to work with distro install media, and many of them now use UEFI-based GRUB configurations in their installation media, which just happen to work with our GRUB Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-02 12:37:25 +01:00
printf "Creating target image: %s\n" "$2"
x_ mkdir -p "${2%/*}"
x_ cp "$1" "$2"
}
main $@