diff --git a/setup.sh b/setup.sh
deleted file mode 100644
index c2016ba..0000000
--- a/setup.sh
+++ /dev/null
@@ -1,542 +0,0 @@
-#!/bin/bash
-#Fail safe for original user sources.list in case setup was interrupted in middle last time
-file="/etc/apt/sources.list.fatrat"
-if [ -f "$file" ]
-then
-echo "Setup Detected that your previous run was interrupted in middle , fixing your original repositories list ."
-sleep 4s
-rm -f /etc/apt/sources.list
-mv /etc/apt/sources.list.fatrat /etc/apt/sources.list
-echo "Your Original repository list was recovered. ;) ..... beginning setup"
-echo ""
-echo "Cleaning previous repositories cache & updating your repository ."
-sudo apt-get clean && apt-get update -y
-sleep 3s
-else
-echo ""
-fi 
-path=`pwd`
-log=$path/logs/setup.log
-config=$path/config/config.path
-
-#Removing any previous setup log created
-rm -f $log 
-# setup.sh Author : Edo maland ( Screetsec )
-# Install all dependencies nedded
-# configuration all file for fixing all problem
-# --------------------------------------------------------
-
-#Check root dulu
-[[ `id -u` -eq 0 ]] || { echo -e "\e[31m Must be root to run script"; exit 1; }
-resize -s 30 73 > /dev/null 2>&1
-clear
-
-
-#This colour
-cyan='\e[0;36m'
-green='\e[0;34m'
-okegreen='\033[92m'
-lightgreen='\e[1;32m'
-white='\e[1;37m'
-red='\e[1;31m'
-yellow='\e[1;33m'
-BlueF='\e[1;34m'
-path=`pwd`
-
-#Banner dong biar keren
-echo -e $cyan ""
-echo "         [ ]=================================================[ ]";
-echo "         [ ]    ________       ____     __  ___       __     [ ]";
-echo "         [ ]     /_  __/ /  ___ / __/__ _/ /_/ _ \___ _/ /_  [ ]";
-echo "         [ ]     / / / _ \/ -_) _// _ \`/ __/ , _/ _ \`/ __/   [ ]";
-echo "         [ ]     /_/ /_//_/\__/_/  \_,_/\__/_/|_|\_,_/\__/   [ ]";
-echo "         [ ]=================================================[ ] ";
-echo "         [ ]          Setup.sh - configuration script        [ ]"
-echo "         [ ]        Use this script to configure fatrat      [ ]"
-echo "         [ ]              Install all dependencies           [ ]"
-echo "         [ ]=================================================[ ]";
-echo ""
-touch $log
-echo "------------------------------------------------------" >> $log
-echo "| Tools paths configured in (setup.sh) for TheFatRat |" >> $log
-echo "------------------------------------------------------" >> $log
-echo "                                                      " >> $log
-#check if xterm is installed
-which xterm > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Xterm.............................[ found ]"
-which xterm >> $log 2>&1
-sleep 2
-else
-echo ""
-echo "[ X ] xterm -> not found!                        ]"
-echo "[ ! ] This script requires xterm                 ]"
-sleep 2
-sudo apt-get install xterm -y
-clear
-echo "[ ✔ ] Done installing .... "
-which xterm >> $log 2>&1
-fi
-
-#check if zenity its installed
-which zenity > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Zenity............................[ found ]"
-which zenity >> $log 2>&1
-sleep 2
-else
-echo ""
-echo "[ X ] zenity -> not found!                       ]"
-echo "[ ! ]  This script requires zenity               ]"
-sleep 2
-echo "[ ! ]  Installing zenity from your apt sources   ]"
-xterm -T "☣ INSTALL ZENITY ☣" -geometry 100x30 -e "sudo apt-get install zenity -y"
-echo "[ ✔ ] Done installing .... "
-which zenity >> $log 2>&1
-fi
-
-# check if gcc exists
-which gcc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Gcc compiler......................[ found ]"
-which gcc >> $log 2>&1
-sleep 2
-else
-echo "[ X ] gcc compiler      -> not found              ]"
-echo "[ ! ]   Installing gcc from your apt sources      ]"
-xterm -T "☣ INSTALL GCC COMPILLER ☣" -geometry 100x30 -e "sudo apt-get install gcc -y"
-echo "[ ✔ ] Done installing .... "
-which gcc >> $log 2>&1
-sleep 2
-fi
-
-# check if mingw32 exists
-which i586-mingw32msvc-gcc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Mingw32 Compiler..................[ found ]"
-which i586-mingw32msvc-gcc >> $log 2>&1
-sleep 2
-else
-echo "[ X ] mingw32 compiler  -> not found               ]"
-echo "[ ! ]   Installing zenity from your apt sources    ]"
-xterm -T "☣ INSTALL MINGW32 COMPILLER ☣" -geometry 100x30 -e "sudo apt-get install mingw32 -y"
-echo "[ ✔ ] Done installing .... "
-which i586-mingw32msvc-gcc >> $log 2>&1
-sleep 2
-fi
-
-# check if monodevelop exists
-which monodevelop > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Monodevelop ......................[ found ]"
-which monodevelop >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Monodevelop  -> not found                     ]"
-echo "[ ! ]  Installing monodevelop from your apt sources ]"
-xterm -T "☣ INSTALL MONODEVELOP ☣" -geometry 100x30 -e "sudo apt-get install monodevelop -y"
-echo "[ ✔ ] Done installing ...."
-which monodevelop >> $log 2>&1
-sleep 2
-fi
-
-# check if ruby exists
-which ruby > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Ruby .............................[ found ]"
-which ruby >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Ruby  -> not found                             ]"
-echo "[ ! ]     Installing ruby from your apt sources      ]"
-xterm -T "☣ INSTALL RUBY ☣" -geometry 100x30 -e "sudo apt-get install ruby -y"
-echo "[ ✔ ] Done installing ...."
-which ruby >> $log 2>&1
-sleep 2
-fi
-
-#check if apache2 exists
-which apache2 > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Apache2 ..........................[ found ]"
-which apache2 >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Apache2 -> not found                            ]"
-echo "[ ! ]    Installing apache2 from your apt sources     ]"
-xterm -T "☣ INSTALL APACHE2 ☣" -geometry 100x30 -e "sudo apt-get install apache2 -y"
-echo "[ ✔ ] Done installing ...."
-which apache2 >> $log 2>&1
-sleep 2
-fi
-
-#check if gnome terminal exists
-#added this new install option because user may be running a distro that may not have gnome terminal installed by default
-#gnome terminal is used in main script to run searchsploit
-which gnome-terminal > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Gnome Terminal....................[ found ]"
-which gnome-terminal >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Gnome-terminal-> not found                      ]"
-echo "[ ! ] Installing gnome-terminal from your apt sources ]"
-xterm -T "☣ INSTALL GNOME-TERMINAL ☣" -geometry 100x30 -e "sudo apt-get install gnome-terminal -y"
-echo "[ ✔ ] Done installing ...."
-which gnome-terminal >> $log 2>&1
-sleep 2
-fi
-
-#Checking if upx compressor exists
-which upx > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] UPX Compressor....................[ found ]"
-which upx >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Upx compressor  -> not found                    ]"
-echo "[ ! ] Installing upx-compressor from your apt sources ]"
-xterm -T "☣ INSTALL UPX COMPRESSOR ☣" -geometry 100x30 -e "sudo apt-get install upx-ucl -y"
-echo "[ ✔ ] Done installing ...."
-which upx >> $log 2>&1
-sleep 2
-fi
-
-#Checking if keytool exists
-which keytool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Keytool (java)....................[ found ]"
-which keytool >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Keytool (java) -> not found                    ]"
-echo "[ ! ] Installing Java from your apt sources ]"
-xterm -T "☣ INSTALL JAVA ☣" -geometry 100x30 -e "sudo apt-get install default-jre default-jdk -y "
-echo "[ ✔ ] Done installing ...."
-which keytool >> $log 2>&1
-sleep 2
-fi
-
-#Checking if Jarsigner exists
-which jarsigner > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Jarsigner (java)..................[ found ]"
-which jarsigner >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Jarsigner (java) -> not found                    ]"
-echo "[ ! ] Installing Java from your apt sources ]"
-xterm -T "☣ INSTALL JAVA ☣" -geometry 100x30 -e "sudo apt-get install default-jdk -y "
-echo "[ ✔ ] Done installing ...."
-which jarsigner >> $log 2>&1
-sleep 2
-fi
-
-#Checking if Unzip exists
-which unzip > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Unzip.............................[ found ]"
-which unzip >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Unzip -> not found                    ]"
-echo "[ ! ] Installing Unzip from your apt sources ]"
-xterm -T "☣ INSTALL UNZIP ☣" -geometry 100x30 -e "sudo apt-get install unzip -y "
-echo "[ ✔ ] Done installing ...."
-which unzip >> $log 2>&1
-sleep 2
-fi
-
-#Checking if Aapt exists
-which aapt > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Aapt..............................[ found ]"
-which aapt >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Aapt -> not found                    ]"
-echo "[ ! ] Installing Aapt from your apt sources ]"
-xterm -T "☣ INSTALL AAPT ☣" -geometry 100x30 -e "sudo apt-get install aapt -y "
-echo "[ ✔ ] Done installing ...."
-which aapt >> $log 2>&1
-sleep 2
-fi
-
-#Installing dependencies for Zipalign
-echo "[ ! ] Installing Zipalign dependencies from your apt sources"
-xterm -T "☣ INSTALL ZIPALING ☣" -geometry 100x30 -e "sudo apt-get install lib32stdc++6 lib32z1 lib32z1-dev -y "
-echo "[ ✔ ] Done installing ...."
-sleep 2
-
-#Checking if Zipalign exists
-which zipalign > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Zipalign..........................[ found ]"
-which zipalign >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Zipalign -> not found                    ]"
-echo "[ ! ] Installing Zipalign from your apt sources "
-xterm -T "☣ INSTALL ZIPALIGN ☣" -geometry 100x30 -e "sudo apt-get install zipalign -y "
-echo "[ ✔ ] Done installing ...."
-which zipalign >> $log 2>&1
-sleep 2
-fi
-
-#################################
-#inputrepo
-#################################
-
-cp /etc/apt/sources.list /etc/apt/sources.list.backup # backup
-# Second backup created in case user stops the script after this point , then on next startup this script will
-# copy the already changed sources file before as backup , and user lost his original sources lists
-file="/etc/apt/sources.list.fatrat"
-if [ -f "$file" ]
-then
-echo ""
-else
-cp /etc/apt/sources.list /etc/apt/sources.list.fatrat
-fi
-rm -f /etc/apt/sources.list
-touch /etc/apt/sources.list
-echo 'deb http://old.kali.org/kali sana main non-free contrib' >> /etc/apt/sources.list
-echo 'deb-src http://old.kali.org/kali sana main non-free contrib' >> /etc/apt/sources.list
-echo 'deb http://http.kali.org/kali kali-rolling main contrib non-free' >> /etc/apt/sources.list
-echo 'deb-src http://http.kali.org/kali kali-rolling main contrib non-free' >> /etc/apt/sources.list
-sleep 2
-xterm -T "☣ UPDATING KALI REPO ☣" -geometry 100x30 -e "sudo apt-get update" >>$log 2>&1
-
-#Checking if apktool exists
-which apktool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Apktool...........................[ found ]"
-which apktool >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Apktool  -> not found                     "
-echo "[ ! ] Installing apktool from Kali repositories "
-xterm -T "☣ INSTALL APKTOOOL ☣" -geometry 100x30 -e "sudo apt-get install apktool --force-yes -y"
-echo "[ ✔ ] Done installing ...."
-which apktool >> $log 2>&1
-sleep 2
-fi
-
-#Checking if dex2jar exists
-which d2j-jar2dex > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Dex2Jar...........................[ found ]"
-which d2j-jar2dex >> $log 2>&1
-sleep 2
-else
-echo "[ X ] Dex2jar  -> not found                     "
-echo "[ ! ] Installing dex2jar from Kali repositories "
-xterm -T "☣ INSTALL APKTOOOL ☣" -geometry 100x30 -e "sudo apt-get install dex2jar --force-yes -y"
-echo "[ ✔ ] Done installing ...."
-which d2j-jar2dex >> $log 2>&1
-sleep 2
-fi
-
-#installing dependencies for ruby script
-echo "[ ! ] Installing dedepndencies for ruby script from Kali repositories "
-xterm -T "☣ INSTALL DEPENDENCIES ☣" -geometry 100x30 -e "sudo apt-get install zlib1g-dev libmagickwand-dev imagemagick  -y"
-echo "[ ✔ ] Done installing ...."
-sleep 2
-
-# check if metasploit-framework its installed
-which msfconsole > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Metasploit-Framework..............[ found ]"
-# msf was detected , removing config file in case setup was already configured before
-rm -f $config
-
-#Creating new config file based on last detection of msf
-touch $config
-echo "********************************************************************************************************" >> $config
-echo "** Configuration Paths for TheFatRat , do not delete anything from this file or program will not work **" >> $config
-echo "**       if you need to reconfig your tools path , then run ./setup.sh in (TheFatRat directory) .     **" >> $config
-echo "********************************************************************************************************" >> $config
-echo "msfconsole" | tee -a $config $log > /dev/null 2>&1
-echo "msfvenom" | tee -a $config $log > /dev/null 2>&1
-sleep 2
-else
-echo ""
-echo "[ X ] metasploit-framework -> not found                         "
-
-# Providing manual input to user in case metasploit was installed from git and is not on system path
-echo ""
-echo -e $white "This script requires Metasploit-Framework do you want to setup its path manually ?";
-echo ""
-read -p "Press Y/y to config metasploit-framework path or N/n to install it from Kali repositories. :" choice
-case "$choice" in
-
-  y|Y)
-rm -f $config
-touch $config
-echo "********************************************************************************************************" >> $config
-echo "** Configuration Paths for TheFatRat , do not delete anything from this file or program will not work **" >> $config
-echo "**       if you need to reconfig your tools path , then run ./setup.sh in (TheFatRat directory) .     **" >> $config
-echo "********************************************************************************************************" >> $config
-clear
-echo -e $white "Enter the path of your Metasploit Instalation or just press enter for default config :
-ex:(/opt/metasploit-framework)";
-read -p "Path: " msfc
-if [[ -z "$msfc" ]]; then
-echo "msfconsole" | tee -a $config $log > /dev/null 2>&1
-echo "msfvenom" | tee -a $config $log > /dev/null 2>&1
-else
-echo "ruby $msfc/msfconsole" | tee -a $config $log > /dev/null 2>&1
-echo "ruby $msfc/msfvenom" | tee -a $config $log > /dev/null 2>&1
-fi
-;;
-
- n|N) 
-echo "[ ! ] Installing metasploit-framework from kali repositories "
-xterm -T "☣ INSTALL METASPLOIT-FRAMEWORK ☣" -geometry 100x30 -e "sudo apt-get install metasploit-framework --force-yes -y"
-echo "[ ✔ ] Done installing ...."
-rm -f $config
-touch $config
-echo "********************************************************************************************************" >> $config
-echo "** Configuration Paths for TheFatRat , do not delete anything from this file or program will not work **" >> $config
-echo "**       if you need to reconfig your tools path , then run ./setup.sh in (TheFatRat directory) .     **" >> $config
-echo "********************************************************************************************************" >> $config
-
-# adding the msf startups automatically to config file
-echo "msfconsole" | tee -a $config $log > /dev/null 2>&1
-echo "msfvenom" | tee -a $config $log > /dev/null 2>&1
-;;
-
- *)
- echo "Invalid Input (Choose y/Y or n/N only)"
-;;
-esac;
-fi
-
-# check if backdoor-factory exists
-which backdoor-factory > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Backdoor-Factory..................[ found ]"
-echo "backdoor-factory" | tee -a $config $log > /dev/null 2>&1
-sleep 2
-else
-echo "[ X ] backdoor-factory  -> not found                  "
-echo ""
-echo -e $white "[This script requires backdoor-factory , do you want to setup its path manually ?]";
-read -p "[Press Y/y to setup backdoor-factory path or N/n to install it from Kali repositories . ]" choice1
-case "$choice1" in
-  
- y|Y )
- clear
-echo -e $white "Enter the path for backdoor.py , or just press [ENTER] for default config : 
-ex:(/opt/backdoor-factory/backdoor.py)";
-read -p "Path: " backdoor
-if [[ -z "$backdoor" ]]; then
-echo "backdoor-factory" | tee -a $config $log > /dev/null 2>&1
-else
-echo "python2 $backdoor" | tee -a $config $log > /dev/null 2>&1
-fi
-;;
-
- n|N )
-echo "[ ! ]   Installing backdoor-factory from kali repositories   ]"
-xterm -T "☣ INSTALL BACKDOOR-FACTORY ☣" -geometry 100x30 -e "sudo apt-get install backdoor-factory --force-yes -y"
-echo "[ ✔ ] Done installing ...."
-echo "backdoor-factory" | tee -a $config $log > /dev/null 2>&1
-;;
-
-*) 
-echo "Invalid Input (Choose y/Y or n/N only)"
-;;
-esac;
-fi
-
-# check if searchsploit exists
-which searchsploit > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo "[ ✔ ] Searchsploit......................[ found ]"
-echo "searchsploit" | tee -a $config $log > /dev/null 2>&1
-sleep 2
-else
-echo "[ X ] searchsploit  -> not found]"
-echo ""
-echo -e $white "[This script requires searchsploit , do you want to setup its path manually ?]";
-read -p "[Press Y/y to config searchsploit path or N/n to install it from Kali repositories .]" choice2
-case "$choice2" in
-  
-  y|Y )
-  clear
-echo -e $white "Enter the path for searchsploit , or just press [ENTER] for default config : 
-ex:(/opt/searchsploit/searchsploit) "
-read -p "Path: " searchsploit
-if [[ -z "$searchsploit" ]]; then
-echo "searchsploit" | tee -a $config $log > /dev/null 2>&1
-else
-echo "bash $searchsploit" | tee -a $config $log > /dev/null 2>&1
-fi
-;;
-
-n|N )
-echo "[ ! ]    Installing searchsploit from kali repositories      ]"
-xterm -T "☣ INSTALL SEARCHSPLOIT ☣" -geometry 100x30 -e "sudo apt-get install exploitdb --force-yes -y"
-echo "[ ✔ ] Done installing ...."
-echo "searchsploit" | tee -a $config $log > /dev/null 2>&1
-sleep 2
-echo ""
-echo "Configuration and tool installed with success!";
-sleep 2
-;;
-
-*) 
-echo "Invalid Input (Choose y/Y or n/N only)"
-;;
-esac
-fi
-################################
-# rebackyo repo
-################################
-echo "Reactivating you original repositories"
-rm -f /etc/apt/sources.list
-mv /etc/apt/sources.list.backup /etc/apt/sources.list
-#now we can remove the emergency backup securely
-rm -f /etc/apt/sources.list.fatrat
-apt-get clean
-xterm -T "☣ UPDATE YOUR REPO ☣" -geometry 100x30 -e "sudo apt-get update "
-clear
-echo -e $yellow "Do you want to create a shortcut for (fatrat) on your (/usr/local/sbin) 
-, so you can run the script from anywhere ?";
-read -p "Press y/Y to create the script , or press n/N to cancel : " choice4
-case "$choice4" in
-
-  y|Y)
-
-dir=`pwd` 
-scrp="cd $dir && ./fatrat"
-rm -f /usr/local/sbin/fatrat
-touch /usr/local/sbin/fatrat
-echo "#!/bin/bash" > /usr/local/sbin/fatrat
-echo $scrp >> /usr/local/sbin/fatrat
-chmod +x /usr/local/sbin/fatrat 
-clear
-echo "";
-  echo "[ ]====================================================================[ ]";
-  echo "[ ] Script Created!! Write: fatrat , on your terminal anywhere   :) !  [ ]";
-  echo "[ ]====================================================================[ ]";
-  echo "";
-  chmod +x fatrat
-  which fatrat >> $log 2>&1
-  sleep 2 
-;;
-
- n|N)
-echo "[ ]=================================================================[ ]";
-echo "[ ]              To execute Fatrat , write ./fatrat                 [ ]";
-echo "[ ]=================================================================[ ]";
-chmod +x fatrat
-;;
-
-*)
-echo "[ ]=================================================================[ ]";
-echo "[ ]              To execute Fatrat , write ./fatrat                 [ ]";
-echo "[ ]=================================================================[ ]";
-chmod +x fatrat
-;;
-esac