diff --git a/setup.sh b/setup.sh
deleted file mode 100755
index 8fc2a2f..0000000
--- a/setup.sh
+++ /dev/null
@@ -1,1276 +0,0 @@
-#!/bin/bash
-#Instalation of searchsploit (exploitdb)
-function ssplt() {
-
-# check if searchsploit exists
-which searchsploit > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Searchsploit......................[ found ]"
-echo "searchsploit" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Searchsploit -> OK" >> "$inst"
-sleep 1
-else
-echo -e "$red" "[ X ] searchsploit  -> not found"
-echo ""
-echo -e "$green" "Select one of the options bellow"
-echo -e "$orange" "+-------------------------------------------------+"
-echo -e "$orange" "|$white [$green 1$white ]$yellow Setup Searchsploit Path Manually$orange          |"
-echo -e "$orange" "|$white [$green 2$white ]$yellow Install Searchsploit from Kali Repository$orange |"
-echo -e "$orange" "+-------------------------------------------------+"
-echo ""
-echo -ne "$green" "Option : ";tput sgr0
-read -r q1
-case $q1 in
- 
-1)
-echo ""
-echo -e "$green" "Enter The Path of your Searchsploit instalation"
-echo -e "$cyan" "ex : /opt/searchsploit/searchsploit"
-echo ""
-echo -ne "$green" "PATH : ";tput sgr0
-read sspp
-if [ ! -f "$sspp" ]
-then
-echo ""
-echo -e "$red" "It was not possible to found searchsploit executable in : $sspp"
-echo ""
-echo -e "$green" "Make sure you write the right path of your instalation"
-echo ""
-echo -e "$green" "Press [ENTER] key to try again ."
-read -r cont
-ssplt
-else
-echo bash "$sspp" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Searchsploit -> OK" >> "$inst"
-fi
-;;
-
-#ok
-2)
-echo -e "$yellow" "[ ! ]  Installing Searchsploit "
-xterm -T "☣ INSTALL SEARCHSPLOIT ☣" -geometry 100x30 -e "sudo apt-get install exploitdb --force-yes -y"
-which searchsploit > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Searchsploit"
-echo "searchsploit" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Searchsploit -> OK" >> "$inst"
-else
-echo "0" > "$stp"
-echo "Searchsploit -> Not OK" >> "$inst"
-fi
-;;
-*)
-ssplt
-;;
-esac
-fi
-echo ""
-#Go check the check file exists and read its value
-chk="$path/logs/check"
-if [ -f "$chk" ]
-then
-ct=`sed -n 1p "$chk"`
-#if value of check is 0 theen some package was not installed sucefully 
-if [ "$ct" == "0" ]; then
-clear
-echo -e "$red" "Fatrat was not able to install some packages"
-echo ""
-echo -e "$blue" "Reactivating your original repositories"
-rm -f /etc/apt/sources.list
-mv /etc/apt/sources.list.backup /etc/apt/sources.list
-#now we can remove the emergency backup securely
-rm -f /etc/apt/sources.list.fatrat
-apt-get clean
-xterm -T "☣ UPDATE YOUR REPO ☣" -geometry 100x30 -e "sudo apt-get update "
-clear
-rm -rf "$config" >/dev/null 2>&1
-
-#Display to user the install.log file and inform him what to do
-echo "Was not possible to install The Packages Labeled (Not Ok) in this list above" >> "$inst"
-echo "Try : (apt-get remove --purge <packagename> && apt-get autoremove && apt-get install -f)" >> "$inst"
-echo "before running fatrat setup script again" >> "$inst"
-cat "$inst"
-exit
-elif [ "$ct" == "1" ]; then
-echo ""
-#value in check file is 1 , then everything is ok , delete install.log file and proceed to finish setup
-rm -rf "$inst" >/dev/null 2>&1
-fi
-else
-#in case value in check file is not 0 or 1 then something is wrong
-echo -e "$green" "Something went very wrong , execute ./setup.sh again"
-rm -rf "$config" >/dev/null 2>&1
-echo ""
-echo "Was not possible to install The Packages Labeled (Not Ok) in this list above" >> "$inst"
-echo "Try : (apt-get remove --purge <packagename> && apt-get autoremove && apt-get install -f)" >> "$inst"
-echo "before running fatrat setup script again" >> "$inst"
-echo "" >> "$inst"
-echo "***********Your current sources.list***************"
-sclst=`cat /etc/apt/sources.list`
-echo "$sclst" >> "$inst"
-echo "***************Finish sources.list*****************" >> "$inst"
-dist=`uname -a`
-echo "" >> "$inst"
-echo "Your linux distribution :" >> "$inst"
-echo "$dist" >> "$inst"
-cat "$inst"
-echo -e "$lightgreen" "This log file can be found in : $inst "
-exit
-fi
-}
-
-function bkf() {
-# Check if backdoor-factory exists
-
-which backdoor-factory > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Backdoor-Factory..................[ found ]"
-echo "backdoor-factory" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Backdoor-Factory -> OK" >> "$inst"
-sleep 1
-ssplt
-else
-echo -e "$red" "[ X ] backdoor-factory  -> not found "
-echo ""
-
-echo ""
-echo -e "$green" "Select one of the options bellow"
-echo -e "$orange" "+-----------------------------------------------------+"
-echo -e "$orange" "|$white [$okegreen 1$white ]$yellow Setup Backdoor-Factory Path Manually$orange          |"
-echo -e "$orange" "|$white [$okegreen 2$white ]$yellow Install Backdoor-Factory from Kali Repository$orange |"
-echo -e "$orange" "+-----------------------------------------------------+"
-echo ""
-echo -ne "$green" "Option : ";tput sgr0
-read -r q2
-case "$q2" in
-
-1)
-echo ""
-echo -e "$green" "Enter The Path of your backdoor-factory instalation"
-echo -e "$cyan" "ex : /opt/backdoor-factory/backdoor.py"
-echo ""
-echo -ne "$green" "PATH : ";tput sgr0
-read -r msp
-bkdf="$msp"
-if [ ! -f "$bkdf" ]
-then
-echo ""
-echo -e "$red" "It was not possible to found backdoor-factory executable in : $bkdf"
-echo ""
-echo -e "$green" "Make sure you write the right path of your instalation"
-echo ""
-echo -e "$green" "Press [ENTER] key to try again ."
-read -r cont
-bkf
-fi
-echo "python2 $bkdf" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Backdoor-factory -> OK" >> "$inst"
-ssplt
-;;
-
-2)
-echo -e "$yellow" "[ ! ] Installing backdoor-factory "
-xterm -T "☣ INSTALL BACKDOOR-FACTORY ☣" -geometry 100x30 -e "sudo apt-get install backdoor-factory --force-yes -y"
-which backdoor-factory > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Backdoor-Factory -> OK"
-echo "backdoor-factory" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Backdoor-factory -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] backdoor-factory"
-echo "0" > "$stp"
-echo "Backdoor-factory -> Not OK" >> "$inst"
-ssplt
-fi
-;;
-
-*)
-bkf
-;;
-esac
-fi
-}
-
-function mtspl() {
-# check if metasploit-framework its installed
-which msfconsole > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Metasploit-Framework..............[ found ]"
-echo "msfconsole" | tee -a "$config" "$log" >> /dev/null 2>&1
-echo "msfvenom" | tee -a "$config" "$log" >> /dev/null 2>&1
-echo "Metasploit -> OK" >> "$inst"
-sleep 1
-bkf
-else
-echo -e "$red" "[ X ] metasploit-framework -> not found "
-
-# Providing manual input to user in case metasploit was installed from git and is not on system path
-
-echo ""
-echo -e "$green" "Select one of the options bellow"
-echo -e "$orange" "+---------------------------------------------------------+"
-echo -e "$orange" "|$white [$okegreen 1$white ]$yellow Setup Metasploit Framework Path Manually$orange          |"
-echo -e "$orange" "|$white [$okegreen 2$white ]$yellow Install Metasploit Framework from Kali Repository$orange |"
-echo -e "$orange" "+---------------------------------------------------------+"
-echo ""
-echo -ne "$green" "Option : ";tput sgr0
-read -r q3
-case "$q3" in
-1)
-echo ""
-echo -e "$green" "Enter The Path of your metasploit instalation"
-echo -e "$cyan" "ex : /opt/metasploit-framework"
-echo ""
-echo -ne "$green" "PATH : ";tput sgr0
-read -r msp
-msfc="$msp/msfconsole"
-msfv="$msp/msfvenom"
-if [ ! -f "$msfc" ]
-then
-echo ""
-echo -e "$red" "It was not possible to found msfconsole in : $msfc"
-echo ""
-echo -e "$green" "Make sure you write the right path of your instalation"
-echo ""
-echo -e "$green" "Press [ENTER] key to try again ."
-read -r cont
-mtspl
-fi
-if [ ! -f "$msfv" ]
-then
-echo ""
-echo -e "$red" "It was not possible to found msfvenom in : $msfv"
-echo ""
-echo -e "$green" "Make sure you write the right path of your instalation"
-echo ""
-echo -e "$green" "Press [ENTER] key to try again ."
-read -r cont
-mtspl
-fi
-#Creation of symlinks to metasploit manual path in /usr/local/sbin to avoid changes in fatrat scripts
-
-unlink /usr/local/sbin/msfconsole > /dev/null 2>&1
-unlink /usr/local/sbin/msfvenom > /dev/null 2>&1
-ln -s "$msfc" /usr/local/sbin/msfconsole > /dev/null 2>&1
-ln -s "$msfv" /usr/local/sbin/msfvenom > /dev/null 2>&1
-echo "msfconsole" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "msfvenom" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Metasploit -> OK" >> "$inst"
-bkf
-;;
-
-2)
-echo -e "$yellow" "[ ! ] Installing Metasploit-Framework  "
-xterm -T "☣ INSTALL METASPLOIT-FRAMEWORK ☣" -geometry 100x30 -e "sudo apt-get install metasploit-framework --force-yes -y"
-which msfconsole > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Metasploit (msfconsole) -> OK"
-echo "msfconsole" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Metasploit (msfconsole) -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Metasploit (msfconsole)"
-echo "Metasploit (msfconsole) -> Not OK" >> "$inst"
-echo "0" > "$stp"
-fi
-which msfvenom > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Metasploit (msfvenom) -> OK"
-echo "msfvenom" | tee -a "$config" "$log" > /dev/null 2>&1
-echo "Metasploit (msfvenom) -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Metasploit (msfvenom)"
-echo "0" > "$stp"
-echo "Metasploit (msfvenom) -> Not OK" >> "$inst"
-fi
-bkf
-;;
-*)
-mtspl
-;;
-esac
-fi
-}
-
-
-function cont() {
-
-stp="logs/check"
-#remove any previous check file from previous attempts
-rm -rf "$stp" >/dev/null 2>&1
-#starting setup , input 1 value to check file
-echo "1" > "$stp"
-#remove any previous install.log file from previous attempts
-rm -rf "$inst" >/dev/null 2>&1
-
-#check if xterm is installed
-which xterm > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Xterm.............................[ found ]"
-which xterm >> "$log" 2>&1
-echo "xterm -> OK" > "$inst"
-else
-echo ""
-echo -e "$red" "[ X ] Xterm -> not found! "
-echo -e "$yellow" "[ ! ] Installing Xterm                     "
-echo -e "$green" ""
-sudo apt-get install xterm -y
-which xterm >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Xterm -> OK"
-echo "Xterm -> OK" > "$inst"
-else
-echo -e "$red" "[ x ] Xterm"
-echo "0" > "$stp"
-echo "xterm -> Not OK" > "$inst"
-fi
-fi
-
-sleep 1
-#check if dig its installed
-which dig > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Dns-Utils ........................[ found ]"
-which dig >> "$log" 2>&1
-echo "Dns-Utils -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] dnsutils -> not found! "
-echo -e "$yellow" "[ ! ]  Installing dnsutils"
-xterm -T "☣ INSTALL DNSUTILS ☣" -geometry 100x30 -e "sudo apt-get install dnsutils -y"
-which dig >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Dns-Utils -> OK"
-echo "Dns-Utils -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Dns-Utils"
-echo "0" > "$stp"
-echo "dns-utils -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-
-#check if mono mcs its installed
-# Mono mcs and devel required to compile program.cs in pwnwinds
-which mcs > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mono-Denvelop Utils ..............[ found ]"
-which mcs >> "$log" 2>&1
-echo "Mono-Denvelop Utils -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Mono-Denvelop Utils -> not found! "
-echo -e "$yellow" "[ ! ]  Installing Mono-Denvelop Utils"
-xterm -T "☣ INSTALL DNSUTILS ☣" -geometry 100x30 -e "sudo apt-get install mono-mcs mono-devel -y"
-which mcs >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mono-Denvelop Utils -> OK"
-echo "Mono-Denvelop Utils -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Mono-Denvelop Utils"
-echo "0" > "$stp"
-echo "Mono-Denvelop Utils -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-
-# check if gcc exists
-which gcc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Gcc compiler......................[ found ]"
-which gcc >> "$log" 2>&1
-echo "GCC -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] gcc compiler      -> not found "
-echo -e "$yellow" "[ ! ]   Installing gcc "
-xterm -T "☣ INSTALL GCC COMPILLER ☣" -geometry 100x30 -e "sudo apt-get install gcc -y"
-which gcc >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] GCC -> OK"
-echo "GCC -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] GCC"
-echo "0" > "$stp"
-echo "gcc -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#check if apache2 exists
-which apache2 > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Apache2 ..........................[ found ]"
-which apache2 >> "$log" 2>&1
-echo "Apache2 -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Apache2 -> not found  "
-echo -e "$yellow" "[ ! ]    Installing apache2 "
-xterm -T "☣ INSTALL APACHE2 ☣" -geometry 100x30 -e "sudo apt-get install apache2 -y"
-which apache2 >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Apache2 -> OK"
-echo "Apache2 -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Apache2"
-echo "0" > "$stp"
-echo "apache2 -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#check if gnome terminal exists
-#added this new install option because user may be running a distro that may not have gnome terminal installed by default
-#gnome terminal is used in main script to run searchsploit
-which gnome-terminal > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Gnome Terminal....................[ found ]"
-which gnome-terminal >> "$log" 2>&1
-echo "Gnome Terminal -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Gnome-terminal-> not found "
-echo -e "$yellow" "[ ! ] Installing gnome-terminal "
-xterm -T "☣ INSTALL GNOME-TERMINAL ☣" -geometry 100x30 -e "sudo apt-get install gnome-terminal -y"
-which gnome-terminal >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Gnome Terminal -> OK"
-echo "Gnome Terminal -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Gnome Terminal"
-echo "0" > "$stp"
-echo "gnome-terminal -> Not OK" >> "$inst"
-fi
-fi
-
-#Checking if upx compressor exists
-sleep 1
-which upx > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] UPX Compressor....................[ found ]"
-which upx >> "$log" 2>&1
-echo "UPX -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Upx compressor  -> not found "
-echo -e "$yellow" "[ ! ] Installing upx-compressor "
-xterm -T "☣ INSTALL UPX COMPRESSOR ☣" -geometry 100x30 -e "sudo apt-get install upx-ucl -y"
-which upx >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] UPX Compressor -> OK"
-echo "UPX -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] UPX Compressor"
-echo "0" > "$stp"
-echo "upx-ucl -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#Checking if Ruby exists
-which ruby > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Ruby..............................[ found ]"
-which ruby >> "$log" 2>&1
-echo "Ruby -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Ruby  -> not found "
-echo -e "$yellow" "[ ! ] Installing Ruby "
-xterm -T "☣ INSTALL Ruby ☣" -geometry 100x30 -e "sudo apt-get install ruby -y && gem install nokogiri"
-which ruby >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Ruby -> OK"
-echo "Ruby -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Ruby"
-echo "0" > "$stp"
-echo "ruby -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#Checking if Openssl exists
-which openssl > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Openssl...........................[ found ]"
-which openssl >> "$log" 2>&1
-echo "Openssl -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Openssl  -> not found "
-echo -e "$yellow" "[ ! ] Installing Openssl "
-xterm -T "☣ INSTALL OPENSSL ☣" -geometry 100x30 -e "sudo apt-get install openssl -y"
-which openssl >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Openssl -> OK"
-echo "Openssl -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Openssl"
-echo "0" > "$stp"
-echo "openssl -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#installing dependencies for ruby script 
-echo -e "$green" "[ ! ] Installing tools dependencies"
-xterm -T "☣ INSTALL DEPENDENCIES ☣" -geometry 100x30 -e "sudo apt-get install zlib1g-dev libmagickwand-dev imagemagick lib32z1 lib32ncurses5 lib32stdc++6 python-pip python-dev build-essential -y && pip install names"
-sleep 1
-
-#################################
-#inputrepo
-#################################
-
-cp /etc/apt/sources.list /etc/apt/sources.list.backup # backup
-# Second backup created in case user stops the script after this point , then on next startup this script will
-# copy the already changed sources file before as backup , and user lost his original sources lists
-file="/etc/apt/sources.list.fatrat"
-if [ -f "$file" ]
-then
-echo ""
-else
-cp /etc/apt/sources.list /etc/apt/sources.list.fatrat
-fi
-rm -f /etc/apt/sources.list
-touch /etc/apt/sources.list
-#echo 'deb http://http.kali.org/kali kali-rolling main contrib non-free' >> /etc/apt/sources.list
-#echo 'deb-src http://http.kali.org/kali kali-rolling main contrib non-free' >> /etc/apt/sources.list
-echo "deb http://deb.debian.org/debian/ jessie main contrib non-free" > /etc/apt/sources.list
-echo "deb https://http.kali.org/kali kali-rolling main non-free contrib" >> /etc/apt/sources.list
-xterm -T "☣ UPDATING KALI REPO ☣" -geometry 100x30 -e "sudo apt-get clean && sudo apt-get clean cache && sudo apt-get update"
-sleep 1
-
-# check if monodevelop exists
-#which monodevelop > /dev/null 2>&1
-#if [ "$?" -eq "0" ]; then
-#echo -e $green "[ ✔ ] Monodevelop ......................[ found ]"
-#which monodevelop >> "$log" 2>&1
-#echo "Monodevelop -> OK" >> "$inst"
-#else
-#echo -e $red "[ X ] Monodevelop  -> not found "
-#echo -e $yellow "[ ! ]  Installing monodevelop "
-#xterm -T "☣ INSTALL MONODEVELOP ☣" -geometry 100x30 -e "sudo apt-get install monodevelop --force-yes -y"
-#which monodevelop >> "$log" 2>&1
-#if [ "$?" -eq "0" ]; then
-#echo -e $green "[ ✔ ] Monodevelop -> OK"
-#echo "Monodevelop -> OK" >> "$inst"
-#else
-#echo -e $red "[ x ] Monodevelop"
-#echo "0" > "$stp"
-#echo "monodevelop -> Not OK" >> "$inst"
-#fi
-#fi
-#sleep 1
-
-#Checking if Jarsigner exists
-which jarsigner > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Jarsigner (java)..................[ found ]"
-which jarsigner >> "$log" 2>&1
-echo "Jarsigner -> OK" >> "$inst"
-rm -f "$config"
-#Creating new config file 
-touch "$config"
-echo "********************************************************************************************************" >> "$config"
-echo "** Configuration Paths for TheFatRat , do not delete anything from this file or program will not work **" >> "$config"
-echo "**       if you need to reconfig your tools path , then run ./setup.sh in (TheFatRat directory) .     **" >> "$config"
-echo "********************************************************************************************************" >> "$config"
-echo "jarsigner" | tee -a "$config" >> /dev/null 2>&1
-else
-echo -e "$red" "[ X ] Jarsigner (java) -> not found "
-echo -e "$yellow" "[ ! ] Installing Java "
-xterm -T "☣ INSTALL default-jdk ☣" -geometry 100x30 -e "sudo apt-get install default-jdk default-jre --force-yes -y "
-which jarsigner > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Jarsigner -> OK"
-which jarsigner >> "$log" 2>&1
-echo "Jarsigner -> OK" >> "$inst"
-rm -f "$config"
-#Creating new config file 
-touch "$config"
-echo "********************************************************************************************************" >> "$config"
-echo "** Configuration Paths for TheFatRat , do not delete anything from this file or program will not work **" >> "$config"
-echo "**       if you need to reconfig your tools path , then run ./setup.sh in (TheFatRat directory) .     **" >> "$config"
-echo "********************************************************************************************************" >> "$config"
-echo "jarsigner" | tee -a "$config" >> /dev/null 2>&1
-else
-echo -e "$red" "[ x ] Jarsigner"
-echo "0" > "$stp"
-echo "jarsigner (default-jdk)-> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-
-#Checking if Unzip exists
-which unzip > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Unzip.............................[ found ]"
-which unzip >> "$log" 2>&1
-echo "unzip" | tee -a "$config" >> /dev/null 2>&1
-echo "Unzip -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Unzip -> not found "
-echo -e "$yellow" "[ ! ] Installing Unzip "
-xterm -T "☣ INSTALL UNZIP ☣" -geometry 100x30 -e "sudo apt-get install unzip --force-yes -y "
-which unzip >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo "unzip" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Unzip -> OK"
-echo "Unzip -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Unzip"
-echo "0" > "$stp"
-echo "unzip -> Not OK" >> "$inst"
-fi
-fi
-
-sleep 1
-#Checking if keytool exists
-which keytool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Keytool (java)....................[ found ]"
-which keytool >> "$log" 2>&1
-echo "keytool" | tee -a "$config" >> /dev/null 2>&1
-echo "Keytool -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Keytool (java) -> not found  "
-echo -e "$yellow" "[ ! ] Installing Java "
-xterm -T "☣ INSTALL JAVA ☣" -geometry 100x30 -e "sudo apt-get install default-jdk --force-yes -y "
-which keytool >> "$log" 2>&1
-if [ "$?" -eq "0" ]; then
-echo "keytool" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Keytool -> OK"
-echo "Keytool -> OK" >> "$inst"
-else 
-echo -e "$red" "[ x ] Keytool"
-echo "0" > "$stp"
-echo "keytool -> Not OK" >> "$inst"
-fi
-fi
-
-sleep 1
-
-#Adding zipalign path to config
-echo -e "$green" "[ ✔ ] Zipalign "
-echo "$path/tools/android-sdk/zipalign" >> "$log" 2>&1
-echo "$path/tools/android-sdk/zipalign" | tee -a "$config" >> /dev/null 2>&1
-sleep 1
-
-
-# check if mingw32 or mingw-64 exists 
-# Case not exists then reedirect to mingw instalation depending on arch
-
-which x86_64-w64-mingw32-gcc >> /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mingw-w64 Compiler................[ found ]"
-which x86_64-w64-mingw32-gcc >> "$log" 2>&1
-echo "Mingw64 -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Mingw-w64 -> not found "
-#Powerstager requires mingw64 to work , mingw32 is required because powerfull.sh requires it for 32bit fud exe compiling
-# In case mingw64 not found then remove any previously mingw32 & 64 bit faulty instalations and install mingw64 
-
-xterm -T "☣ INSTALL MINGW64 COMPILLER ☣" -geometry 100x30 -e "sudo apt-get remove --purge mingw* -y && apt-get autoremove -y && apt-get install -f -y && apt-get install mingw* --force-yes -y"
-which x86_64-w64-mingw32-gcc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mingw-64 Compiler..................[ found ]"
-which x86_64-w64-mingw32-gcc >> "$log" 2>&1
-echo "Mingw64 -> OK" >> "$inst"
-else
-echo "0" > "$stp"
-echo "mingw-w64 -> Not OK" >> "$inst"
-fi
-fi
-
-# check if ming32  
-# Case not exists then reedirect to mingw instalation depending on arch
-
-which i686-w64-mingw32-gcc >> /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mingw-32 Compiler.................[ found ]"
-which i686-w64-mingw32-gcc >> "$log" 2>&1
-echo "Mingw32 -> OK" >> "$inst"
-else
-echo -e "$red" "[ X ] Mingw-32 -> not found "
-#Powerstager requires mingw64 to work , mingw32 is required because powerfull.sh requires it for 32bit fud exe compiling
-# In case mingw64 not found then remove any previously mingw32 & 64 bit faulty instalations and install mingw64 
-
-xterm -T "☣ INSTALL MINGW32 COMPILLER ☣" -geometry 100x30 -e "sudo apt-get remove --purge mingw* -y && apt-get autoremove -y && apt-get install -f -y && apt-get install mingw* --force-yes -y"
-which i686-w64-mingw32-gcc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Mingw-32 Compiler..................[ found ]"
-which i686-w64-mingw32-gcc >> "$log" 2>&1
-echo "Mingw32 -> OK" >> "$inst"
-else
-echo "0" > "$stp"
-echo "mingw-32 -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#Checking for DX and in case exists then check if it is version 1.12 used in fatrat (latest android sdk) 
-which dx > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-dxg=$(dx --version 2>&1 | tee temp/dx)
-dxv=$(cat temp/dx | awk '{print $3}') 
-case "$dxv" in
-1.12)
-#DX exists and it is version 1.12
-rm -rf temp/dx >/dev/null 2>&1
-which dx >> "$log" 2>&1
-echo "dx" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] DX 1.12...........................[ found ]"
-echo "DX -> OK" >> "$inst"
-;;
-*)
-#DX does not exists or is not 1.8 version
-xterm -T "☣ Removing Your Current DX ☣" -geometry 100x30 -e "sudo apt-get remove --purge dx -y"
-unlink "/usr/local/sbin/dx" > /dev/null 2>&1
-ln -s "$path/tools/android-sdk/dx" "/usr/local/sbin/dx" > /dev/null 2>&1
-which dx > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which dx >> "$log" 2>&1
-echo "dx" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] DX 1.12.........................[Installed]"
-echo "DX -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] DX 1.12"
-echo "0" > "$stp"
-echo "dx -> Not OK" >> "$inst"
-fi
-;;
-esac
-else
-unlink "/usr/local/sbin/dx" > /dev/null 2>&1
-ln -s "$path/tools/android-sdk/dx" "/usr/local/sbin/dx" > /dev/null 2>&1
-which dx > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which dx >> "$log" 2>&1
-echo "dx" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] DX 1.12.........................[Installed]"
-echo "DX -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] DX 1.12"
-echo "0" > "$stp"
-echo "dx -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-# check if aapt exists and if it is version v0.2-3544217 used in fatrat (android sdk)
-
-which aapt > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-aptv=`aapt v | awk '{print $5}'`
-case "$aptv" in
-v0.2-3544217)
-#exists and it is v0.2-3544217
-which aapt >> "$log" 2>&1
-echo "aapt" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Aapt v0.2-3544217.................[ found ]"
-echo "Aapt -> OK" >> "$inst"
-;;
-*)
-#Aapt does not exists or is not the latest version used in fatrat (android sdk)
-xterm -T "☣ Removing Your Current Aapt ☣" -geometry 100x30 -e "sudo apt-get remove --purge aapt -y"
-unlink "/usr/local/sbin/aapt" > /dev/null 2>&1
-rm /usr/local/sbin/aapt >/dev/null 2>&1
-ln -s "$path/tools/android-sdk/aapt" "/usr/local/sbin/aapt" > /dev/null 2>&1
-which aapt > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which aapt >> "$log" 2>&1
-echo "aapt" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Aapt v0.2-3544217..................[Installed]"
-echo "Aapt -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Aapt v0.2-3544217"
-echo "0" > "$stp"
-echo "aapt -> Not OK" >> "$inst"
-fi
-;;
-esac
-else
-unlink "/usr/local/sbin/aapt" > /dev/null 2>&1
-ln -s "$path/tools/android-sdk/aapt" "/usr/local/sbin/aapt" > /dev/null 2>&1
-which aapt > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which aapt >> "$log" 2>&1
-echo "aapt" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Aapt v0.2-3544217.................[Installed]"
-echo "Aapt -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Aapt v0.2-3544217"
-echo "0" > "$stp"
-echo "aapt -> Not OK" >> "$inst"
-fi
-fi
-sleep 1
-#Same procedure used for dx and aapt , but for apktool 2.4.0.
-which apktool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-apk=`apktool | sed -n 1p | awk '{print $2}'` > /dev/null 2>&1
-case "$apk" in 
-v.2.4.1)
-which apktool >> "$log" 2>&1
-echo "apktool" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Apktool v.2.4.1..................[ found ]"
-echo "Apktool -> OK" >> "$inst"
-;;
-*)
-xterm -T "☣ REMOVE OLD APKTOOL ☣" -geometry 100x30 -e "sudo apt-get remove --purge apktool -y"
-unlink "/usr/local/sbin/apktool" > /dev/null 2>&1
-ln -s "$path/tools/apktool2.4.1/apktool" "/usr/local/sbin/apktool" > /dev/null 2>&1
-which apktool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Apktool v.2.4.1..................[Installed]"
-which apktool >> "$log" 2>&1
-echo "apktool" | tee -a "$config" >> /dev/null 2>&1
-echo "Apktool -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Apktool v.2.4.1"
-echo "0" > "$stp"
-echo "apktool -> Not OK" >> "$inst"
-fi
-;;
-esac
-else
-unlink "/usr/local/sbin/apktool" > /dev/null 2>&1
-ln -s "$path/tools/apktool2.4.1/apktool" "/usr/local/sbin/apktool" > /dev/null 2>&1
-which apktool > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which apktool >> "$log" 2>&1
-echo "apktool" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Apktool v.2.4.1..................[Installed]"
-echo "Apktool -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Apktool v.2.4.1"
-echo "0" > "$stp"
-echo "apktool -> Not OK" >> "$inst"
-fi
-fi
-
-sleep 1
-# Installing baksmali 2.3.3 
-which baksmali > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-bsvs=$(baksmali --version | sed -n 1p | awk '{print$2}')
-case "$bsvs" in
-2.3.3)
-which baksmali >> "$log" 2>&1
-echo "baksmali" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Baksmali v.2.3.3..................[ found ]"
-echo "Baksmali -> OK" >> "$inst"
-;;
-*)
-xterm -T "☣ REMOVE OLD BAKSMALI ☣" -geometry 100x30 -e "sudo apt-get remove --purge baksmali -y"
-unlink "/usr/local/sbin/baksmali" > /dev/null 2>&1
-ln -s "$path/tools/baksmali233/baksmali" "/usr/local/sbin/baksmali" > /dev/null 2>&1
-which baksmali > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo -e "$green" "[ ✔ ] Baksmali v.2.3.3..................[Installed]"
-which baksmali >> "$log" 2>&1
-echo "baksmali" | tee -a "$config" >> /dev/null 2>&1
-echo "Baksmali -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Baksmali v.2.3.3"
-echo "0" > "$stp"
-echo "baksmali -> Not OK" >> "$inst"
-fi
-;;
-esac
-else
-unlink "/usr/local/sbin/baksmali" > /dev/null 2>&1
-ln -s "$path/tools/baksmali233/baksmali" "/usr/local/sbin/baksmali" > /dev/null 2>&1
-which baksmali > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-which baksmali >> "$log" 2>&1
-echo "baksmali" | tee -a "$config" >> /dev/null 2>&1
-echo -e "$green" "[ ✔ ] Baksmali v.2.3.3..................[Installed]"
-echo "Baksmali -> OK" >> "$inst"
-else
-echo -e "$red" "[ x ] Baksmali v.2.3.3"
-echo "0" > "$stp"
-echo "baksmali -> Not OK" >> "$inst"
-fi
-fi
-mtspl
-
-################################
-# rebackyo repo
-################################
-echo -e "$blue" "Reactivating your original repositories"
-rm -f /etc/apt/sources.list
-mv /etc/apt/sources.list.backup /etc/apt/sources.list
-#now we can remove the emergency backup securely
-rm -f /etc/apt/sources.list.fatrat
-apt-get clean
-xterm -T "☣ UPDATE YOUR REPO ☣" -geometry 100x30 -e "sudo apt-get update "
-clear
-echo -e "$green" "Do you want to create a shortcut for fatrat in your system"
-echo -e "$green" "so you can run fatrat from anywhere in your terminal and desktop ?"
-echo ""
-echo -ne "$cyan" "Choose y/n : "
-read -r cho
-case "$cho" in
-
-y|Y|Yes|yes|YES)
-lnk=$?
-if [ "$lnk" ==  "0" ];then
-dir=`pwd` 
-scrp="cd $dir && ./fatrat"
-rm -f /usr/local/sbin/fatrat
-touch /usr/local/sbin/fatrat
-echo "#!/bin/bash" > /usr/local/sbin/fatrat
-echo "$scrp" >> /usr/local/sbin/fatrat
-cp "$path/config/TheFatRat.desktop" /usr/share/applications/TheFatRat.desktop
-cp "$path/icons/TheFatRat.ico" /usr/share/icons/TheFatRat.ico
-chmod +x /usr/local/sbin/fatrat
-chmod +x fatrat
-which fatrat >> "$log" 2>&1
-clear
-echo ""
-echo -e "$green" "Instalation completed , To execute fatrat write anywhere in your terminal (fatrat)"
-fi
-;;
-
-n|no|No|NO)
-chmod +x fatrat
-clear
-echo ""
-echo -e "$green" "Instalation completed , To execute fatrat write in fatrat directory (./fatrat)"
-;;
-
-*)
-chmod +x fatrat
-clear
-echo ""
-echo -e "$green" "Instalation completed , To execute fatrat write in fatrat directory (./fatrat)"
-;;
-esac
-exit 
-
-}  
-#Case ping goggle hostname fails , the this function will load to check what is happening 
-function chknet() {
-echo -e "$red" "[X] Your Internet is not working correctly!"
-sleep 1
-echo -e "$cyan" "[*] Checking ...."
-#ping hostname failed , so now will test ping google ip dns server
-ping -c 1 8.8.4.4 > /dev/null 2>&1
-png="$?" 
- if [ "$png" == "0" ]
-then
-#Ping dns server worked , inform user what happened and proceed with setup
-    echo -e "$red" "[X] Your linux OS is not able to resolve"
-    echo -e "$red" "hostnames over terminal using ping !!"
-    echo ""
-    echo -e "$yellow" "Search on the web : (unable to resolve hostnames ping) to find a solution"
-echo ""
-echo -e "$green" "Setup will continue , but is not garantee that apt package management
-may work properly , or even if it can resolve hostnames ."
-echo ""
-echo -e "$cyan" "Setup will continue because :"
-echo -e "$green" "Ping google.com =$red Failed"
-echo -e "$green" "Ping google DNS = Success"
-echo ""
-echo -e "$green" "Press [ENTER] key to continue"
-read continue
-cont
-    sleep 1
-elif [ "$png" == "1" ]
-then
-#user is only connected to lan and not to the web , abort setup
-    echo -e "$yellow" "You are connected to your local network but not to the web ."
-    echo -e "$yellow" "Check if your router/modem gateway is connected to the web ."
-echo ""
-echo -e "$green" "Setup will not continue , you are only connected to your local lan."
-echo ""
-echo -e "$cyan" "Setup will stop because :"
-echo -e "$green" "Ping google.com =$red Failed"
-echo -e "$green" "Ping google DNS =$red Failed"
-echo ""
-echo -e "$green" "Press [ENTER] key to continue"
-read -r continue
-exit 1
-sleep 1
-elif [ "$png" == "2" ]
-then
-# user is not connected to anywhere , web or lan , abort setup
-echo -e "$red" "You are not connected to any network ."
-echo ""
-echo -e "$cyan" "Setup will stop because :"
-echo -e "$green" "Ping google.com =$red Failed"
-echo -e "$green" "Ping google DNS =$red Failed"
-echo ""
-echo -e "$green" "Press [ENTER] key to continue"
-read -r continue
-exit 1
-    sleep 1
-fi
-}
-chkpkg () {
-pkgi="$path/tools/pkgs"	
-if [[ ! -f	"$pkgi" ]]
-then
-wget https://raw.githubusercontent.com/Screetsec/TheFatRat/master/tools/pkgs -O "$pkgi" >/dev/null 2>&1
-if [[ ! -f	"$pkgi" ]]
-then
-echo ""
-echo -e "$red""Somehow your fatrat is not in the latest release , and we were "
-echo -e "$red""unable to download a critical package from github ."
-echo ""
-echo -e "$red""Make sure you are connected to internet before running setup."	
-echo ""
-exit 1
-fi
-fi
-for i in {1..28}
-do
-rdpkg=$(sed -n ${i}p < "$pkgi")
-cpkg=$(apt-cache search "$rdpkg" | grep "$rdpkg " | awk '{print$1}')
-if [[ -z "$cpkg" ]]
-then
-if [[ ! -f "$aptlog" ]]
-then
-echo "Fatrat package location diagnostic" > "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "$rdpkg - Does not exist in user repository" >> "$aptlog"
-else
-echo "$rdpkg - Does not exist in user repository" >> "$aptlog"
-fi
-else
-if [[ ! -f "$aptlog" ]]
-then
-echo "Fatrat package location diagnostic" > "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "$rdpkg - Exist in user repository" >> "$aptlog"
-else
-echo "$rdpkg - Exist in user repository" >> "$aptlog"
-fi
-fi
-done
-echo "" >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "User path environment" >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "$PATH"  >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "User current repositories"  >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-if [[ -f "/etc/apt/sources.list" ]]
-then
-cat "/etc/apt/sources.list" >> "$aptlog"
-else
-echo "sources.list file was not found in user OS" >> "$aptlog"
-fi
-echo "-----------------------------------" >> "$aptlog"
-echo "User Linux Distribution"
-echo "-----------------------------------" >> "$aptlog"
-uname -a >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-echo "         Access User Level         " >> "$aptlog"
-echo "-----------------------------------" >> "$aptlog"
-if [ "$(whoami)" == "root" ] ; then
-echo "User is root level"
-else
-which sudo > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then 
-sudo -l >> "$aptlog"
-else
-echo "Sudo not installed , unable to determine user rights" >> "$aptlog"
-fi
-fi
-echo "-----------------------------------" >> "$aptlog"
-echo "Done"
-echo ""
-echo -e "$yellow""A report was created in :"
-echo -e "$green""$aptlog"
-echo ""
-echo "If you find any issues installing fatrat then"
-echo "Upload this report to your issue in github"
-echo -e "$yellow"""
-read -rsp $'Press [ENTER] key to continue setup \n' -n 1 key
-
-}
-# setup.sh Original Author : Edo maland ( Screetsec )
-# Script rebuilded by peterpt
-# Install all dependencies nedded
-# configuration all file for fixing all problems
-# --------------------------------------------------------
-
-
-#Fail safe for original user sources.list in case setup was interrupted in middle last time
-file="/etc/apt/sources.list.fatrat"
-if [ -f "$file" ]
-then
-echo "Setup Detected that your previous run was interrupted in middle , fixing your original repositories list ."
-sleep 4s
-rm -f /etc/apt/sources.list
-mv /etc/apt/sources.list.fatrat /etc/apt/sources.list
-echo "Your Original repository list was recovered. ;) ..... beginning setup"
-echo ""
-echo "Cleaning previous repositories cache & updating your repository ."
-echo -e "$yellow" ""
-sudo apt-get clean && apt-get update -y
-sleep 2
-else
-echo -e "$green" ""
-fi 
-#variables for logs and others
-path=`pwd`
-arch=$(uname -m)
-inst="$path/logs/install.log"
-log="$path/logs/setup.log"
-aptlog="$path/logs/apt.log"
-config="$path/config/config.path"
-#Removing any previous setup log created
-rm -rf "$log" > /dev/null 2>&1
-rm -rf logs/check > /dev/null 2>&1
-rm -rf "$aptlog" > /dev/null 2>&1
-#terminal text colours code
-cyan='\033[0;36m'
-green='\033[0;32m'
-lightgreen='\e[0;32m'
-white='\e[0;37m'
-red='\e[0;31m'
-yellow='\033[0;33m'
-blue='\033[0;34m'
-orange='\e[38;5;166m'
-
-#Check root dulu
-if [ $(id -u) != "0" ]; then
-echo -e "$red" [x]::[not root]: You need to be [root] to run this script.;
-      echo ""
-   	  sleep 1
-exit 0
-fi
-#Many fresh installed linux distros do not come with sudo installed
-which sudo > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo ""
-else
-apt-get install sudo -y
-fi
-echo ""
-# Fixing any possible problems with packages missed/corrupted dependencies on user OS before proceed
-echo -ne "$green""[ * ] Fixing any possible broken packages in apt management..."
-sleep 1
-sudo apt-get install -f -y && sudo apt-get autoremove -y > /dev/null 2>&1
-echo "Done"
-sleep 1
-echo ""
-echo -ne "$green""Checking necessary packages with your current repositories ...."
-chkpkg
-echo ""
-sleep 2
-echo -ne "$green""* - Checking file permissions ..."
-chmod +x powerfull.sh
-chmod +x update
-chmod +x backdoor_apk
-chmod +x tools/power.py
-chmod +x tools/android-sdk/zipalign
-chmod +x tools/baksmali233/baksmali
-chmod +x tools/android-sdk/dx
-chmod +x tools/android-sdk/aapt
-chmod +x tools/apktool2.4.1/apktool
-chmod +x tools/android-string-obfuscator/lib/aso
-chmod +x tools/pump.py
-chmod +x tools/pw_exec.py
-chmod +x tools/trusted_2_6.py
-echo "Done"
-sleep 0.5
-clear
-#Banner dong biar keren
-echo -e "$green" ""
-echo "___________         __  __________          __    "
-echo "\_   _____/_____  _/  |_\______   \_____  _/  |_  "
-echo " |    __)  \__  \ \   __\|       _/\__  \ \   __\ "
-echo " |     \    / __ \_|  |  |    |   \ / __ \_|  |   "
-echo " \___  /   (____  /|__|  |____|_  /(____  /|__|   "
-echo "     \/         \/              \/      \/        "
-echo "                 ____    ________                 "
-echo "                /_   |  /   __   \                "
-echo "                 |   |  \____    /                "
-echo "                 |   |     /    /                 "
-echo "                 |___| /\ /____/                  "
-echo "                       \/                         "
-echo ""
-echo -e "$blue" "         Setup Script for FATRAT 1.9.7       "
-echo "------------------------------------------------------" > "$log"
-echo "| Tools paths configured in (setup.sh) for TheFatRat |" >> "$log"
-echo "------------------------------------------------------" >> "$log"
-echo "                                                      " >> "$log"
-echo ""
-#Detect if user OS is 32Bit or 64bit
-case "$arch" in
-x86_64|aarch64) 
-echo -e "$yellow" "              64Bit OS detected"
-echo ""
-;;
-i386|i486|i586|i686)
-echo -e "$yellow" "              32Bit OS detected"
-echo ""
-;;
-*)
-echo -e "$red" "Setup will not proceed because none of these archs were detected"
-echo ""
-echo -e "$blue" "x86_64|i386|i486|i586|i686|aarch64"
-echo ""
-echo -e "$green" "Your linux arch: $blue $arch $green is not supported"
-echo ""
-echo -e "Press any key to continue"
-read -r abor
-exit 0
-;;
-esac
-echo -e "$green" "Checking type of shell ...."
-sleep 1
-
-#Check if user is using a remote shell or a local terminal
-if [ -n "$SSH_CLIENT" ] || [ -n "$SSH_TTY" ]; then
-  echo "[remote]"
-echo ""
-    echo -e "$red" "Fatrat & Setup does not work over a remote secure shell ."
-    echo ""
-echo -e "$green" "If you want to Install Fatrat on a remote computer then "
-echo -e "$green" "use a remote desktop connection like (rdesktop) or (vnc) "
-echo ""
-echo -e "$green" "Press [ENTER] key to exit"
-read -r abor
-exit 1
-else
-echo "[local]"
-  case $(ps -o comm= -p $PPID) in
-    sshd|*/sshd) SESSION_TYPE=remote/ssh;;
-  esac
-fi
-
-sleep 1
-which nc > /dev/null 2>&1
-if [ "$?" -eq "0" ]; then
-echo ""
-else
-sudo apt-get install netcat -y > /dev/null 2>&1
-fi
-sleep 1
-#First check of setup for internet connection by connecting to google over http
-echo -e "$green" "[ * ] Checking for internet connection"
-sleep 1
-echo -e "GET http://google.com HTTP/1.0\n\n" | nc google.com 80 > /dev/null 2>&1
-if [ $? -ne 0 ]; then
-echo -e "$red" [ X ]::[Internet Connection]: OFFLINE!;
-chknet
-    sleep 1
-else
-echo -e "$green" [ ✔ ]::[Internet Connection]: CONNECTED!;
-    sleep 1
-    cont
-fi
-
-#ping -c 1 google.com > /dev/null 2>&1
-#png="$?" 
-# if [ $png == "0" ]
-#then
-#ping google hostname was succefully , then proceed with setup 
-#    echo -e $green [ ✔ ]::[Internet Connection]: CONNECTED!;
-#    sleep 1
-#    cont
-#elif [ $png == "1" ]
-#then
-#ping hostname failed , load chknet function
-#    echo -e $yellow [ X ]::[Internet Connection]: LOCAL ONLY!;
-#    chknet
-#    sleep 1
-#elif [ $png == "2" ]
-#then
-#ping hostname failed , load chknet function
-#echo -e $red [ X ]::[Internet Connection]: OFFLINE!;
-#chknet
-#    sleep 1
-#fi