diff --git a/mpd/mpd.conf b/mpd/mpd.conf
new file mode 100644
index 0000000..a988c97
--- /dev/null
+++ b/mpd/mpd.conf
@@ -0,0 +1,416 @@
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory		"~/Music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+#playlist_directory		"/var/lib/mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file			"~/.mpd/mpd.db"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog.
+#
+log_file			"~/.mpd/mpd.log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file			"~/.mpd/mpd.pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+#state_file			"/var/lib/mpd/mpdstate"
+#
+# The location of the sticker database.  This is a database which
+# manages dynamic information attached to songs.
+#
+#sticker_file			"/var/lib/mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+#user				"mpd"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group				"audio"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other than the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activiation is in use.
+#
+# For network
+#bind_to_address		"any"
+#
+# And for Unix Socket
+#bind_to_address		"/run/mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+port				"6600"
+#
+# Suppress all messages below the given threshold.  Use "verbose" for
+# troubleshooting. Available setting arguments are "notice", "info", "verbose",
+# "warning" and "error".
+#
+log_level			"verbose"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists	"no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This example just enables the "comment" tag without disabling all
+# the other supported tags:
+#metadata_to_use "+comment"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+auto_update	"no"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself.  There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks	"yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks		"yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+zeroconf_enabled		"no"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network. %h will be replaced with the hostname.
+#
+#zeroconf_name			"Music Player @ %h"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password                        "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions             "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+# An example of a database section instead of the old 'db_file' setting.
+# It enables mounting other storages into the music directory.
+#
+#database {
+#       plugin "simple"
+#       path "~/.local/share/mpd/db
+#       cache_directory "~/.local/share/mpd/cache"
+#}
+#
+# An example of database config for a sattelite setup
+#
+#music_directory "nfs://fileserver.local/srv/mp3"
+#database {
+#       plugin "proxy"
+#       host "other.mpd.host"
+#       port "6600"
+#}
+
+# Input #######################################################################
+#
+input {
+        plugin "curl"
+#       proxy "proxy.isp.com:8080"
+#       proxy_user "user"
+#       proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+#	type		"alsa"
+#	name		"ALSA Device"
+##	device	"plug:plugequal"	# optional
+##	mixer_control	"Master"		# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"default"	# optional
+##	mixer_control	"PCM"		# optional
+##	mixer_index	"0"		# optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+#	type		"oss"
+#	name		"My OSS Device"
+##	device		"/dev/dsp"	# optional
+##	mixer_type      "hardware"	# optional
+##	mixer_device	"/dev/mixer"	# optional
+##	mixer_control	"PCM"		# optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+#	type		"shout"
+#	encoder		"vorbis"		# optional
+#	name		"My Shout Stream"
+#	host		"localhost"
+#	port		"8000"
+#	mount		"/mpd.ogg"
+#	password	"hackme"
+#	quality		"6.0"
+#	bitrate		"192"
+#	format		"48000:16:2"
+##	protocol	"icecast2"		# optional
+##	user		"source"		# optional
+##	description	"My Stream Description"	# optional
+##	url		"http://example.com"	# optional
+##	genre		"jazz"			# optional
+##	public		"no"			# optional
+##	timeout		"2"			# optional
+##	mixer_type      "software"		# optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+#	type		"recorder"
+#	name		"My recorder"
+#	encoder		"vorbis"		# optional, vorbis or lame
+#	path		"/var/lib/mpd/recorder/mpd.ogg"
+#	quality		"6.0"			# do not define if bitrate is defined
+##	bitrate		"192"			# do not define if quality is defined
+##	format		"48000:16:2"	#optional
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+#	type		"httpd"
+#	name		"HTTP Stream"
+#	encoder	"vorbis"		# optional, vorbis or lame
+#	port		"8000"
+#	bind_to_address	"0.0.0.0"	# optional, IPv4 or IPv6
+#	quality		"6.0"			# do not define if bitrate is defined
+##	bitrate		"192"			# do not define if quality is defined
+##	format		"48000:16:2"	#optional
+##	max_clients	"0"			# optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+audio_output {
+	type		"pulse"
+	name		"Pulse Output"
+##	server		"remote_server"		# optional
+##	sink		"remote_server_sink"	# optional
+##	media_role	"media_role"		#optional
+}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+#	type		"winmm"
+#	name		"My WinMM output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+##	mixer_type	"hardware"	# optional
+#}
+#
+# An example of a wasapi output (Windows multimedia API).
+#
+#audio_output {
+#	type		"wasapi"
+#	name		"My WASAPI output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#		or
+##	device		"0"		# optional
+## Exclusive mode blocks all other audio source, and get best audio quality without resampling.
+##	exclusive	"no"		# optional
+## Enumerate all devices in log.
+##	enumerate	"no"		# optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+#	type		"openal"
+#	name		"My OpenAL output"
+##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+#	type		"sndio"
+#	name		"sndio output"
+#	mixer_type	"hardware"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+#	type		"osx"
+#	name		"My OS X Device"
+##	device		"Built-in Output"	# optional
+##	channel_map      "-1,-1,0,1"	# optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+#	type		"pipe"
+#	name		"my pipe"
+#	command		"aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+#	command		"nc example.org 8765"
+##	format		"48000:16:2"	# optional
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+#	type		"null"
+#	name		"My Null Output"
+#	mixer_type      "none"			# optional
+#}
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <https://wiki.hydrogenaud.io/index.php?title=Replaygain> for
+# more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain			"album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp		"0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp	"0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit		"yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization		"no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+filesystem_charset		"UTF-8"
+#
+###############################################################################