102 lines
6.4 KiB
Text
102 lines
6.4 KiB
Text
/etc/66/jobo66.txt
|
|
|
|
ADDENDUM for old Obarun 66 pre-0.7.0.0 (July 9th 2024)
|
|
The text below this paragraph is as was in the past, what has changed is a way to facilitate
|
|
a choice between the old 66 and the new provided by obarun. To get the old you must
|
|
activate the 66-EOL repository of joborun found in the latest pacman.conf (pacman.conf.pacnew
|
|
if you have upgraded pacman and didn't review the changes).
|
|
To select the latest of s6 and 66 as provided by obarun make sure 66-EOL is disabled (default)
|
|
and enable obcore and observice repositories. Then install 66 as obarun describes.
|
|
This ensures there will be no more conflicts between joborun's vintage 66 edition
|
|
and dependencies and new s6/66.
|
|
After reviewing the new 66, all changes, and the way it has been maintained by obarun
|
|
we have decided (after long debate among us) to not continue maintaining our own
|
|
version or support the use in any way.
|
|
From now on joborun will only support the use of runit while allowing other init
|
|
and service managers to be added without conflict.
|
|
END OF ADDENDUM NOTE
|
|
______________
|
|
|
|
Ok, you have seen runit, you see how easy it is to configure, emable/start service
|
|
supervision disable/stop them, very little resources attributed to init and service
|
|
monitoring, but this is as far as runit's minimalism goes.
|
|
|
|
You are now about to try something more, something much better, something much more
|
|
configurable/hackable, something that will make runit look like a scateboard compared
|
|
to a racy sportscar. Resources used: A tiny bit more in the untrained eye, but
|
|
well worth it due to speed and configurability. The slow bash script running of runit
|
|
is replaced by binaries built on minimal C libraries (skalibs oblibs), managing
|
|
minimalistic databases of configured services, parameters, modules, trees (bundles of
|
|
services), and most importantly running all this in very specific and configurable
|
|
environments. Meanwhile, while runit has one binary running init another supervising
|
|
services, it is prone to crash if the supervisor crashes, leaving a terminal init
|
|
program unable to do anything other to receive a signal for shutdown that has left
|
|
no place to come from (unless maybe through an ssh server, if it is still running,
|
|
which it shouldn't, since it is most likely also supervised by the crashing runsvdir).
|
|
|
|
The sky is the limit with this one, root services, user services, containers, virtual
|
|
machines, all in separate modifiable environments and customized service dependencies.
|
|
|
|
As some people get intimidated too soon by s6 and even 66 (which was made to make
|
|
s6 more manageable and easier to understand) and do not pursue further experimentation,
|
|
within the Arch-Linux ecosystem, it is either Obarun and s6/66 or many distros with
|
|
systemd or its counterpart elogind, making them practically ALL the same with the
|
|
exception of PID1. Now there is a choice, and even though runit had its final developmental
|
|
touches 8 years ago, it is only recently it has received some attention and popularity,
|
|
mainly due to its simplicity, of running it and also of implementing it.
|
|
|
|
IMPORTANT - READ BEFORE REBOOTING !!!!!!!!!!
|
|
|
|
With this package and our initial setup stored inside the tarball (currently an alpha version)
|
|
you can install this package and reboot. The only configuring you must do is to remove
|
|
init=/usr/bin/runit-init from the linux line of the bootloader, either at /etc/default/grub
|
|
or syslinux, and rerunning it, or by manually editing the bootloader entry (ie /boot/grub/grub.cfg)
|
|
and if you haven't removed runit yet maybe make a copied entry into custom.cfg, one
|
|
staying as is, marked as runit, the 2nd as 66 without the init=....
|
|
|
|
66 will install its own /usr/bin/init which is the default location for arch kernels (actually
|
|
/sbin/init which points to /usr/bin/init.
|
|
Therefore you now have a live choice of two completely separate systems and service supervisors.
|
|
Both, together, with all the service scripts, are still a fraction of space of what systemd or
|
|
elogind occupy, and either one uses a tiny fraction of the resources that systemd does.
|
|
|
|
DO NOT SKIP THE 2 PARAGRAPHS ABOVE !!!!!!!!
|
|
|
|
Honestly, our runit employment here is just trivial and to satisfy those willing to inquire
|
|
of the two systems. In our daily work we have been using s6/66 for years and wouldn't trade
|
|
it for anything else. But we have provided a good bed for true side by side comparison.
|
|
|
|
Feel free to shoot questions to our contact/support points but the best source of real accurate
|
|
technical information for 66 and s6 are their discussion email lists (obarun.org and skarnet.org).
|
|
|
|
Based on the instruction of our wiki https://git.disroot.org/joborun/web/src/branch/main/index.md
|
|
you will see how to install using our tar-ball and how easy it is to just install this package
|
|
here, edit your bootloader as mentioned above, and REBOOT! We seriously doubt you would want to
|
|
go back to runit after this. If something breaks from tinkering and you don't know how to fix
|
|
it and reboot, rm -rf /etc/66, copy the /etc/66 tree from the tarball into your installation,
|
|
and run % sudo 66-intree -zg and everything should be there ready for reboot again.
|
|
|
|
This is why we call our version of boot not boot@, although it is no different from Obarun's
|
|
other than where shutdown, halt, reboot, poweroff are located.
|
|
|
|
|
|
For additional service scripts for 66 see below:
|
|
The observice repository (pkg -Sl observice) are the Obarun service files for 66>= 0.7.0.0 not for 66-EOL
|
|
See also additional or more minimalistic and runit like services for 66 from mobinmob
|
|
https://codeberg.org/mobinmob/66-voidlinux and https://osdn.net/projects/avyssos/
|
|
|
|
Although those from mobinmob/avyssos projects are meant for void, few scripts may need
|
|
some manual modification to match flags and parameters to arch's packages (very few, like ntpd)
|
|
otherwise they generally work. /etc/66/service is the default place for sysadmins to store
|
|
66 service files that will not be altered by packaging.
|
|
|
|
The avyssos project is a close cousin of joborun. While the avyssos tries to make it easier
|
|
to adopt s6/66 in void without removing runit necesseraly, we try to make it possible for
|
|
arch-linux/obarun to also boot with runit.
|
|
|
|
Basically, any init and service management/supervision should fit besides runit
|
|
this is why we don't link /usr/bin/runit-init to /sbin/init so it remains unaffected.
|
|
|
|
To read this document again it is saved in /etc/66:
|
|
/etc/66/jobo66.txt
|
|
|