endless formating to match disroot

limine.md

@@ -12,40 +12,59 @@ Limine works with either a DOS or an GPT partion table. GPT is recommended.
 A FAT partion is required. A modern trend is to make the FAT partion the /boot directory so make the size at least 256M or 512M.
 
 `mkfs.fat -F 32 /dev/sdXY (for example and where X = disk letter and Y = the partiton number)`
+
 `mkdir /mnt/boot`
+
 `mount /dev/sdXY /boot`
+
 `pacman -Syu linux-lts limine`
+
 `mv /boot/limine/limine.cfg /boot/limine/limine.cfg.jobopkg`
+
 `nano /boot/limine/limine.cfg `
 
 and add:
 
 `TIMEOUT=5`
+
 `:Joborun Linux-LTS`
+
 `PROTOCOL=linux`
+
 `KERNEL_PATH=boot:///vmlinuz-linux-lts`
+
 `CMDLINE=root=UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx ro net.ifnames=0 ipv6.disable=1 init=/usr/bin/runit-init`
+
 `MODULE_PATH=boot:///initramfs-linux-lts.img`
 
 
-(Your UUID can be found by ‘cat /etc/fstab’ or ‘genfstab -U /’
+(Your UUID can be found by ‘cat /etc/fstab’ or ‘genfstab -U /’ or ls -lh /dev/disk/by-uuid )
+
 
 
 9. limine bios-install /dev/sdX (limine-bios.sys has already been added to /boot/limine/)
 
 #### Installing Limine on a new UEFI installation
 
+
 Step 0: The following command should be run outside (if non-systemd) and inside the chroot:
 mount -t efivarfs efivarfs /sys/firmware/efi/efivars
 
+
 Steps 1 through 8 apply to a new UEFI installation as well but steps 1-5 are very familiar to UEFI setups and don’t really need instructions here.
 
+
  `pkg -S efibootmgr`
+
  `mount -t efivarfs efivarfs /sys/firmware/efi/efivars`
+
  `mkdir -p /boot/EFI/BOOT`
+
  `cp /usr/share/limine/BOOTX64.EFI /boot/EFI/BOOT/`
+
  `efibootmgr --create --disk /dev/sdX --part Y --loader ‘EFI\BOOT\BOOTX64.EFI’ --label ‘Limine Boot Manager’ --unicode`
 
+
 where X and Y need to be replaced with your disk letter and partition number. Note that backslashes are used here instead of forward slashes. Also note that ‘/boot’ or ‘\boot’ is omitted as it is cover by the disk and partition info.
 
 ___
@@ -56,6 +75,8 @@ ___
 
 Installing limine on an existing system with GRUB can also be done but limine does not replace or reorder the efibootmgr entries but I’ll leave that for another day.
 
+
+
 **References:**
 
 - https://wiki.archlinux.org/title/Limine