freebsd-ports/comms/lirc/files/lircd.in

#!/bin/sh
#
# $FreeBSD$
#
# PROVIDE: lircd
# REQUIRE: DAEMON
#
# Add the following line to /etc/rc.conf to enable lircd:
#
# lircd_enable="YES"
#

. /etc/rc.subr

name="lircd"
rcvar=lircd_enable

load_rc_config ${name}
: ${lircd_enable="NO"}
: ${lircd_device="/dev/lirc0"}

procname=%%PREFIX%%/sbin/lircd
pidfile=/var/run/lirc/lircd.pid
lircd_config="%%PREFIX%%/etc/lircd.conf"
required_files=${lircd_config}
command="%%PREFIX%%/sbin/lircd"
command_args="-d ${lircd_device} ${lircd_config}"

run_rc_command "$1"
- Update to 0.8.0 - Hack configure so produced daemon binary is ready to use with third party kernel drivers. - Make libirman support optional. - Move daemon communication sockets under /var/run/lirc. - Add startup script. - Use bzip2. - Minor cleanups. Approved by: maintaner 2007-01-19 03:27:23 +01:00			`#!/bin/sh`
			`#`
			`# $FreeBSD$`
			`#`
			`# PROVIDE: lircd`
			`# REQUIRE: DAEMON`
			`#`
			`# Add the following line to /etc/rc.conf to enable lircd:`
			`#`
			`# lircd_enable="YES"`
			`#`

Begin the process of deprecating sysutils/rc_subr by s#. %%RC_SUBR%%#. /etc/rc.subr# 2010-03-27 01:15:24 +01:00			`. /etc/rc.subr`
- Update to 0.8.0 - Hack configure so produced daemon binary is ready to use with third party kernel drivers. - Make libirman support optional. - Move daemon communication sockets under /var/run/lirc. - Add startup script. - Use bzip2. - Minor cleanups. Approved by: maintaner 2007-01-19 03:27:23 +01:00
			`name="lircd"`
In the rc.d scripts, change assignments to rcvar to use the literal name_enable wherever possible, and ${name}_enable when it's not, to prepare for the demise of set_rcvar(). In cases where I had to hand-edit unusual instances also modify formatting slightly to be more uniform (and in some cases, correct). This includes adding some $FreeBSD$ tags, and most importantly moving rcvar= to right after name= so it's clear that one is derived from the other. 2012-01-14 09:57:23 +01:00			`rcvar=lircd_enable`
- Update to 0.8.0 - Hack configure so produced daemon binary is ready to use with third party kernel drivers. - Make libirman support optional. - Move daemon communication sockets under /var/run/lirc. - Add startup script. - Use bzip2. - Minor cleanups. Approved by: maintaner 2007-01-19 03:27:23 +01:00
			`load_rc_config ${name}`
			`: ${lircd_enable="NO"}`
			`: ${lircd_device="/dev/lirc0"}`

Fix a few "bad example" problems in the rc.d scripts that have been propogated by copy and paste. 1. Primarily the "empty variable" default assignment, which is mostly ${name}_flags="", but fix a few others as well. 2. Where they are not already documented, add the existence of the _flags (or other deleted empties) option to the comments, and in some cases add comments from scratch. 3. Replace things that look like: prefix=%%PREFIX%% command=${prefix}/sbin/foo to just use %%PREFIX%%. In many cases the $prefix variable is only used once, and in some cases it is not used at all. 4. In a few cases remove ${name}_flags from command_args 5. Remove a long-stale comment about putting the port's rc.d script in /etc/rc.d (which is no longer necessary). No PORTREVISION bumps because all of these changes are noops. 2009-07-15 18:56:10 +02:00			`procname=%%PREFIX%%/sbin/lircd`
- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc support in webcamd svn (for mceusb-based receivers/transmitters and USB DVB tuner remotes supported by the Linux code), and enable support for a few more USB devices while we're at it tho of those only an FTDI-based one was tested: http://www.huitsing.nl/irftdi/ [1] - Fix plist for audio/rhythmbox and multimedia/totem and add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for multimedia/xine when building them with (optional) lirc support. [2] - Chase liblirc_client shlib version bump for ports depdending on it and bump PORTREVISIONs for ports depending on it by default. Approved by: portmgr (miwi) [2] Thanks to: Warren Block <wblock@wonkity.com> for testing [1] 2011-02-26 23:11:54 +01:00			`pidfile=/var/run/lirc/lircd.pid`
Fix a few "bad example" problems in the rc.d scripts that have been propogated by copy and paste. 1. Primarily the "empty variable" default assignment, which is mostly ${name}_flags="", but fix a few others as well. 2. Where they are not already documented, add the existence of the _flags (or other deleted empties) option to the comments, and in some cases add comments from scratch. 3. Replace things that look like: prefix=%%PREFIX%% command=${prefix}/sbin/foo to just use %%PREFIX%%. In many cases the $prefix variable is only used once, and in some cases it is not used at all. 4. In a few cases remove ${name}_flags from command_args 5. Remove a long-stale comment about putting the port's rc.d script in /etc/rc.d (which is no longer necessary). No PORTREVISION bumps because all of these changes are noops. 2009-07-15 18:56:10 +02:00			`lircd_config="%%PREFIX%%/etc/lircd.conf"`
- Update to 0.8.0 - Hack configure so produced daemon binary is ready to use with third party kernel drivers. - Make libirman support optional. - Move daemon communication sockets under /var/run/lirc. - Add startup script. - Use bzip2. - Minor cleanups. Approved by: maintaner 2007-01-19 03:27:23 +01:00			`required_files=${lircd_config}`
Fix a few "bad example" problems in the rc.d scripts that have been propogated by copy and paste. 1. Primarily the "empty variable" default assignment, which is mostly ${name}_flags="", but fix a few others as well. 2. Where they are not already documented, add the existence of the _flags (or other deleted empties) option to the comments, and in some cases add comments from scratch. 3. Replace things that look like: prefix=%%PREFIX%% command=${prefix}/sbin/foo to just use %%PREFIX%%. In many cases the $prefix variable is only used once, and in some cases it is not used at all. 4. In a few cases remove ${name}_flags from command_args 5. Remove a long-stale comment about putting the port's rc.d script in /etc/rc.d (which is no longer necessary). No PORTREVISION bumps because all of these changes are noops. 2009-07-15 18:56:10 +02:00			`command="%%PREFIX%%/sbin/lircd"`
- Update to 0.8.0 - Hack configure so produced daemon binary is ready to use with third party kernel drivers. - Make libirman support optional. - Move daemon communication sockets under /var/run/lirc. - Add startup script. - Use bzip2. - Minor cleanups. Approved by: maintaner 2007-01-19 03:27:23 +01:00			`command_args="-d ${lircd_device} ${lircd_config}"`

			`run_rc_command "$1"`