freebsd-ports/sysutils/apcupsd/files/pkg-message.in

**********************************************************************
Read the manual

  %%DOCSDIR%%/apcupsd.pdf

to do site specific configuration assigenments! Especially have a
detailed look into the chapter describing the shutdown procedure.

Sample files are installed in %%ETCDIR%%. These files
must be copied and/or configured for a proper working apcupsd.
You need to modify %%ETCDIR%%/apcupsd.conf as follows:

  For serial cable: DEVICE /dev/cuadX (or /dev/cuaaX for [45.]x)
  For USB cable: DEVICE (yes, leave it blank after DEVICE)

NOTE that for USB cable you must comment out the line

  device         uhid            # "Human Interface Devices"

in your kernel configuration file and recompile the kernel.
Your keyboard and mouse will still work.

WARNING USB support on FreeBSD is still considered BETA!

Add apcupsd_enable=YES to your /etc/rc.conf[.local] to have apcupsd
starting up at boot time.

**********************************************************************
o) Update to version 3.10.17 (from 3.10.15) now USB on FreeBSD should work (read manual!!) 2005-04-15 19:24:04 +02:00			`**********************************************************************`
			`Read the manual`
o) Add a notice to read the manual for site configuration, especially to get a propper shutdown sequence. 2002-08-05 09:43:43 +02:00
- Update to 3.14.8 - Among other things, the SNMP driver that does not require libsnmp.so - Adjust pkg-message to point to the right manual [1] Full list of changes: http://apcupsd.cvs.sourceforge.net/viewvc/checkout/apcupsd/apcupsd/ReleaseNotes?pathrev=Release-3_14_8 Submitted by: Scott Bennett <bennett@cs.niu.edu> [1] Tested by: Ulrich Drolshagen <u.drolshagen@t-online.de>, imp@inbox.ru, Warren Block <wblock@wonkity.com>, mack@ 2010-04-03 10:47:33 +02:00			`%%DOCSDIR%%/apcupsd.pdf`
Update from 3.10.13 -> 3.10.15 - Fix for lost config files during "portupgrade apcupsd" (PR ports/67251) - Mandrake 10 USB users, please note, you must either use devfs to access the USB or reconfigure your kernel and turn CONFIG_USB_DYNAMIC_MINORS off. - The NIS slave server code (net driver) should be much more efficient and robust than previous versions. - The code as a whole is much more resistant to buffer overflows since most all string copies are now protected. PR: 67251 Submitted by: Rob <robbyrnes@fastmail.com.au> 2004-10-14 21:28:31 +02:00
o) Update to version 3.10.17 (from 3.10.15) now USB on FreeBSD should work (read manual!!) 2005-04-15 19:24:04 +02:00			`to do site specific configuration assigenments! Especially have a`
			`detailed look into the chapter describing the shutdown procedure.`
Update from 3.10.13 -> 3.10.15 - Fix for lost config files during "portupgrade apcupsd" (PR ports/67251) - Mandrake 10 USB users, please note, you must either use devfs to access the USB or reconfigure your kernel and turn CONFIG_USB_DYNAMIC_MINORS off. - The NIS slave server code (net driver) should be much more efficient and robust than previous versions. - The code as a whole is much more resistant to buffer overflows since most all string copies are now protected. PR: 67251 Submitted by: Rob <robbyrnes@fastmail.com.au> 2004-10-14 21:28:31 +02:00
- Update to 3.14.2 - Now the port build depends on devel/makedepend - Utilize ETCDIR for Makefile and pkg-plist - Move pkg-message to FILESDIR - No need to use USE_GETTEXT=yes, because port doesn't install any mo files and --enable-nls option doesn't help. With --with-included-gettext apcupsd doesn't build. PR: ports/116774 Submitted by: Alexander Logvinov 2007-10-21 12:39:39 +02:00			`Sample files are installed in %%ETCDIR%%. These files`
o) Update to version 3.10.17 (from 3.10.15) now USB on FreeBSD should work (read manual!!) 2005-04-15 19:24:04 +02:00			`must be copied and/or configured for a proper working apcupsd.`
- Update to 3.14.2 - Now the port build depends on devel/makedepend - Utilize ETCDIR for Makefile and pkg-plist - Move pkg-message to FILESDIR - No need to use USE_GETTEXT=yes, because port doesn't install any mo files and --enable-nls option doesn't help. With --with-included-gettext apcupsd doesn't build. PR: ports/116774 Submitted by: Alexander Logvinov 2007-10-21 12:39:39 +02:00			`You need to modify %%ETCDIR%%/apcupsd.conf as follows:`
Update from 3.10.13 -> 3.10.15 - Fix for lost config files during "portupgrade apcupsd" (PR ports/67251) - Mandrake 10 USB users, please note, you must either use devfs to access the USB or reconfigure your kernel and turn CONFIG_USB_DYNAMIC_MINORS off. - The NIS slave server code (net driver) should be much more efficient and robust than previous versions. - The code as a whole is much more resistant to buffer overflows since most all string copies are now protected. PR: 67251 Submitted by: Rob <robbyrnes@fastmail.com.au> 2004-10-14 21:28:31 +02:00
- Fix trailing whitespace in pkg-messages Approved by: portmgr blanket 2016-05-19 13:09:14 +02:00			`For serial cable: DEVICE /dev/cuadX (or /dev/cuaaX for [45.]x)`
o) Update to version 3.10.17 (from 3.10.15) now USB on FreeBSD should work (read manual!!) 2005-04-15 19:24:04 +02:00			`For USB cable: DEVICE (yes, leave it blank after DEVICE)`

			`NOTE that for USB cable you must comment out the line`

			`device uhid # "Human Interface Devices"`

			`in your kernel configuration file and recompile the kernel.`
			`Your keyboard and mouse will still work.`

			`WARNING USB support on FreeBSD is still considered BETA!`

- Update to 3.12.2 - Use new rc.d script - Reorganize Makefile PR: 92466 Notified by: "Alex Samorukov" <samm___os2.kiev.ua> Submitted by: maintainer 2006-04-22 15:51:37 +02:00			`Add apcupsd_enable=YES to your /etc/rc.conf[.local] to have apcupsd`
			`starting up at boot time.`

o) Update to version 3.10.17 (from 3.10.15) now USB on FreeBSD should work (read manual!!) 2005-04-15 19:24:04 +02:00			`**********************************************************************`