kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/devel/openocd/pkg-message

29 lines
1,008 B
Text
Raw Normal View History

The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. OpenOCD uses a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1) compliant taps on your target board. OpenOCD currently supports many types of hardware dongles: USB based, parallel port based, and other standalone boxes that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged via the GDB protocol. Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. WWW: http://openocd.berlios.de/ PR: 135094 Submitted by: CeDeROM <tomek.cedro@gmail.com>
2009-06-02 02:23:42 +02:00
===============================================================================
-update openocd from 0.4.0 -> 0.5.0 -committers notes: patch modified to use userspace 'WITH_*' and not -oslevel 'USE_*', requested by gabor PR: ports/161989 Submitted by: maintainer Reviewed by: gabor Approved by: gabor(mentor) Feature safe: yes
2011-12-05 18:11:24 +01:00
OpenOCD is now installed, this software can damage your hardware, enjoy!
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. OpenOCD uses a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1) compliant taps on your target board. OpenOCD currently supports many types of hardware dongles: USB based, parallel port based, and other standalone boxes that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged via the GDB protocol. Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. WWW: http://openocd.berlios.de/ PR: 135094 Submitted by: CeDeROM <tomek.cedro@gmail.com>
2009-06-02 02:23:42 +02:00
-update openocd from 0.4.0 -> 0.5.0 -committers notes: patch modified to use userspace 'WITH_*' and not -oslevel 'USE_*', requested by gabor PR: ports/161989 Submitted by: maintainer Reviewed by: gabor Approved by: gabor(mentor) Feature safe: yes
2011-12-05 18:11:24 +01:00
User's guide is at:
http://openocd.sourceforge.net/documentation/online-docs/
Developer's guide is at:
http://openocd.sourceforge.net/documentation/openocd-reference-manual/
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. OpenOCD uses a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1) compliant taps on your target board. OpenOCD currently supports many types of hardware dongles: USB based, parallel port based, and other standalone boxes that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged via the GDB protocol. Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. WWW: http://openocd.berlios.de/ PR: 135094 Submitted by: CeDeROM <tomek.cedro@gmail.com>
2009-06-02 02:23:42 +02:00
-update openocd from 0.4.0 -> 0.5.0 -committers notes: patch modified to use userspace 'WITH_*' and not -oslevel 'USE_*', requested by gabor PR: ports/161989 Submitted by: maintainer Reviewed by: gabor Approved by: gabor(mentor) Feature safe: yes
2011-12-05 18:11:24 +01:00
FreeBSD USB NOTE:
To allow an ordinary user to acces any of the the hotplug USB interface
add him/her to the operator group (pw groupmod operator -m username), then
setup the devfs subsystem by adding these lines to the following files:
***/etc/devfs.rules (FreeBSD 8.x):
[localrules=10]
- Update to 0.4.0 PR: 144241 Submitted by: CeDeROM <tomek.cedro@gmail.com> (maintainer)
2010-03-13 15:37:04 +01:00
add path 'ugen*' mode 0660 group operator
add path 'usb/*' mode 0660 group operator
add path 'usb' mode 0770 group operator
-update openocd from 0.4.0 -> 0.5.0 -committers notes: patch modified to use userspace 'WITH_*' and not -oslevel 'USE_*', requested by gabor PR: ports/161989 Submitted by: maintainer Reviewed by: gabor Approved by: gabor(mentor) Feature safe: yes
2011-12-05 18:11:24 +01:00
***/etc/devfs.rules (FreeBSD 7.x):
[localrules=10]
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. OpenOCD uses a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1) compliant taps on your target board. OpenOCD currently supports many types of hardware dongles: USB based, parallel port based, and other standalone boxes that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged via the GDB protocol. Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. WWW: http://openocd.berlios.de/ PR: 135094 Submitted by: CeDeROM <tomek.cedro@gmail.com>
2009-06-02 02:23:42 +02:00
add path 'ugen*' mode 0660 group operator
-update openocd from 0.4.0 -> 0.5.0 -committers notes: patch modified to use userspace 'WITH_*' and not -oslevel 'USE_*', requested by gabor PR: ports/161989 Submitted by: maintainer Reviewed by: gabor Approved by: gabor(mentor) Feature safe: yes
2011-12-05 18:11:24 +01:00
***/etc/rc.conf:
- Update to 0.4.0 PR: 144241 Submitted by: CeDeROM <tomek.cedro@gmail.com> (maintainer)
2010-03-13 15:37:04 +01:00
devfs_system_ruleset="localrules"
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. OpenOCD uses a "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1) compliant taps on your target board. OpenOCD currently supports many types of hardware dongles: USB based, parallel port based, and other standalone boxes that run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged via the GDB protocol. Flash writing is supported for external CFI compatible NOR flashes (Intel and AMD/Spansion command set) and several internal flashes (LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for various NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is included. WWW: http://openocd.berlios.de/ PR: 135094 Submitted by: CeDeROM <tomek.cedro@gmail.com>
2009-06-02 02:23:42 +02:00
===============================================================================
Reference in a new issue Copy permalink