freebsd-ports/graphics/multican/Makefile

# Created by: Alexey Dokuchaev <danfe@FreeBSD.org>
# $FreeBSD$

PORTNAME=	multican
DISTVERSION=	0.0.5
PORTREVISION=	1
CATEGORIES=	graphics
MASTER_SITES=	SF

MAINTAINER=	nemysis@gmx.ch
COMMENT=	Remote control utility for Canon DSLR cameras

LICENSE=	GPLv2

CFLAGS+=	-fPIC	# required at least on amd64
USE_LDCONFIG=	yes

PLIST_FILES=	bin/multican lib/libmultican.so.0 lib/libmultican.so \
		include/canonio.h include/usbio.h

PORTDOCS=	ChangeLog README TODO

.include <bsd.port.pre.mk>

.if ${OSVERSION} < 800069
LIB_DEPENDS=	usb:${PORTSDIR}/devel/libusb
CFLAGS+=	-I${LOCALBASE}/include		# does not uphold CPPFLAGS
LDFLAGS+=	-L${LOCALBASE}/lib
.endif

post-patch:
	@${REINPLACE_CMD} -e 's|endian.h|sys/&|' ${WRKSRC}/canonio.c \
		${WRKSRC}/usbio.c ${WRKSRC}/multican.c

post-install:
	${INSTALL_PROGRAM} ${WRKSRC}/${PORTNAME} ${PREFIX}/bin/
	${INSTALL_LIB} ${WRKSRC}/libmultican.so.0 ${PREFIX}/lib/
	${LN} -sf libmultican.so.0 ${PREFIX}/lib/libmultican.so
	${INSTALL_DATA} ${WRKSRC}/*.h ${PREFIX}/include

.if ${PORT_OPTIONS:MDOCS}
	@${MKDIR} ${DOCSDIR}
	${INSTALL_DATA} ${PORTDOCS:S|^|${WRKSRC}/|} ${DOCSDIR}
.endif

.include <bsd.port.post.mk>
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`# Created by: Alexey Dokuchaev <danfe@FreeBSD.org>`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`# $FreeBSD$`

			`PORTNAME= multican`
			`DISTVERSION= 0.0.5`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`PORTREVISION= 1`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`CATEGORIES= graphics`
			`MASTER_SITES= SF`

- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`MAINTAINER= nemysis@gmx.ch`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`COMMENT= Remote control utility for Canon DSLR cameras`

			`LICENSE= GPLv2`

- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`CFLAGS+= -fPIC # required at least on amd64`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`USE_LDCONFIG= yes`

			`PLIST_FILES= bin/multican lib/libmultican.so.0 lib/libmultican.so \`
			`include/canonio.h include/usbio.h`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`PORTDOCS= ChangeLog README TODO`

			`.include <bsd.port.pre.mk>`

			`.if ${OSVERSION} < 800069`
			`LIB_DEPENDS= usb:${PORTSDIR}/devel/libusb`
Fix the build on amd64 (missing -fPIC). 2011-09-05 04:57:05 +02:00			`CFLAGS+= -I${LOCALBASE}/include # does not uphold CPPFLAGS`
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS) - Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead PR: 157936 Submitted by: myself Exp-runs by: pav Approved by: pav 2011-09-24 00:26:39 +02:00			`LDFLAGS+= -L${LOCALBASE}/lib`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`.endif`

			`post-patch:`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`@${REINPLACE_CMD} -e 's\|endian.h\|sys/&\|' ${WRKSRC}/canonio.c \`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`${WRKSRC}/usbio.c ${WRKSRC}/multican.c`

			`post-install:`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`${INSTALL_PROGRAM} ${WRKSRC}/${PORTNAME} ${PREFIX}/bin/`
			`${INSTALL_LIB} ${WRKSRC}/libmultican.so.0 ${PREFIX}/lib/`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`${LN} -sf libmultican.so.0 ${PREFIX}/lib/libmultican.so`
			`${INSTALL_DATA} ${WRKSRC}/*.h ${PREFIX}/include`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00
			`.if ${PORT_OPTIONS:MDOCS}`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`@${MKDIR} ${DOCSDIR}`
- Convert to OptionsNG - Pass maintainership to submitter PR: ports/177062 Submitted by: nemysis <nemysis@gmx.ch> 2013-03-18 18:10:57 +01:00			`${INSTALL_DATA} ${PORTDOCS:S\|^\|${WRKSRC}/\|} ${DOCSDIR}`
Multican is Canon EOS cameras USB remote control utility for 300D, 350D, 30D, 20D, and 5D. Multican allows scripted remote control of multiple cameras; it is possible to control up to six cameras attached at the same time. Multican communicates with camera directly, without generic library such as provided by gPhoto2, and currently has no GUI, which makes it no replacement for Canon's EOS Utility, but it can be useful nonetheless in various setups, e.g. for astrophotography. WWW: http://multican.sourceforge.net/ 2011-08-31 11:14:15 +02:00			`.endif`

			`.include <bsd.port.post.mk>`