Revert rev 1.109 of Makefile. Given the likelihood of future changes

in the configuration affecting the base system's MTA, the management
of multiple POST-INSTALL-NOTES files could easily become a nightmare.

Instead, use a single POST-INSTALL-NOTES file that includes instructions
that, at worst, suggest unnecessary but harmless changes.

While here, use bullets instead of a numbered list for the notes, so
that future deltas are easier to read.

Also, mention the 'daily_status_include_submit_mailq' periodic.conf(5)
knob, as reported in PR ports/38925.

PR:		ports/38925
Submitted by:	Pat Lashley <patl+freebsd@phoenix.volant.org>
This commit is contained in:
Sheldon Hearn 2002-06-18 09:43:05 +00:00
parent 4dd9a866cd
commit f14203f336
Notes: svn2git 2021-03-31 03:12:20 +00:00
svn path=/head/; revision=61499
6 changed files with 24 additions and 108 deletions

View file

@ -17,6 +17,10 @@ MAINTAINER= sheldonh@FreeBSD.org
USE_BZIP2= yes
.if defined(NOPORTDOCS)
PKGMESSAGE= ${FILESDIR}/POST-INSTALL-NOTES
.endif
MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH}
# If WITH_EXIMON is defined, the eximon monitor, which requires X,
@ -80,20 +84,10 @@ RUN_DEPENDS= ${LOCALBASE}/sbin/eximon:${PORTSDIR}/mail/exim-monitor
.include <bsd.port.pre.mk>
.if ${OSVERSION} < 500033
PI_NOTES_FILE= ${FILESDIR}/POST-INSTALL-NOTES
.else
PI_NOTES_FILE= ${FILESDIR}/POST-INSTALL-NOTES.latest
.endif
.if ${OSVERSION} < 400014
WITHOUT_IPV6= yes
.endif
.if defined(NOPORTDOCS)
PKGMESSAGE= ${PI_NOTES_FILE}
.endif
SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},'
.if !defined(WITHOUT_TLS)
@ -207,8 +201,7 @@ post-install:
${INSTALL_SCRIPT} ${FILESDIR}/exim.sh ${PREFIX}/etc/rc.d
.if !defined(NOPORTDOCS)
${MKDIR} ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${PI_NOTES_FILE} \
${PREFIX}/share/doc/exim/POST-INSTALL-NOTES
${INSTALL_DATA} ${FILESDIR}/POST-INSTALL-NOTES ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/filter.txt ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/oview.txt ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/spec.txt ${PREFIX}/share/doc/exim

View file

@ -24,11 +24,13 @@ In addition, a comprehensive FAQ list is available at:
To use Exim instead of sendmail:
1) Create exim/configure from exim/configure.default .
2) Stop the sendmail daemon.
3) Adjust mailer.conf(5) as appropriate.
4) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
5) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
*) Create exim/configure from exim/configure.default .
*) Clear the sendmail queue and stop the sendmail daemon.
*) Adjust mailer.conf(5) as appropriate.
*) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
*) Set the 'daily_status_include_submit_mailq' periodic.conf(5) variable
to 'NO'.
*) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
You may also want to configure newsyslog(8) to rotate Exim log files:

View file

@ -1,37 +0,0 @@
The following documentation has been installed:
info 'Exim Overview' -> Overview of Exim
info Exim -> Exim Specification (User Guide)
info 'Exim Filtering' -> Exim Filter Specification (for end-users)
In addition, plain text versions of these documents have been installed
as:
${PREFIX}/share/doc/exim/oview.txt
${PREFIX}/share/doc/exim/filter.txt
${PREFIX}/share/doc/exim/spec.txt
Postscript, PDF and HTML versions of these documents are available in
the ports tree as:
ports/mail/exim-doc-postscript
ports/mail/exim-doc-pdf
ports/mail/exim-doc-html
In addition, a comprehensive FAQ list is available at:
http://www.exim.org/
To use Exim instead of sendmail:
1) Create exim/configure from exim/configure.default .
2) Stop the sendmail daemon.
3) Adjust mailer.conf(5) as appropriate.
4) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
5) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
You may also want to configure newsyslog(8) to rotate Exim log files:
/var/log/exim/mainlog mailnull:mail 640 7 * @T00 Z
/var/log/exim/rejectlog mailnull:mail 640 7 * @T00 Z

View file

@ -17,6 +17,10 @@ MAINTAINER= sheldonh@FreeBSD.org
USE_BZIP2= yes
.if defined(NOPORTDOCS)
PKGMESSAGE= ${FILESDIR}/POST-INSTALL-NOTES
.endif
MAKE_ENV+= OSTYPE=${OPSYS} ARCHTYPE=${MACHINE_ARCH}
# If WITH_EXIMON is defined, the eximon monitor, which requires X,
@ -80,20 +84,10 @@ RUN_DEPENDS= ${LOCALBASE}/sbin/eximon:${PORTSDIR}/mail/exim-monitor
.include <bsd.port.pre.mk>
.if ${OSVERSION} < 500033
PI_NOTES_FILE= ${FILESDIR}/POST-INSTALL-NOTES
.else
PI_NOTES_FILE= ${FILESDIR}/POST-INSTALL-NOTES.latest
.endif
.if ${OSVERSION} < 400014
WITHOUT_IPV6= yes
.endif
.if defined(NOPORTDOCS)
PKGMESSAGE= ${PI_NOTES_FILE}
.endif
SEDLIST= -e 's,XX_PREFIX_XX,${PREFIX},'
.if !defined(WITHOUT_TLS)
@ -207,8 +201,7 @@ post-install:
${INSTALL_SCRIPT} ${FILESDIR}/exim.sh ${PREFIX}/etc/rc.d
.if !defined(NOPORTDOCS)
${MKDIR} ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${PI_NOTES_FILE} \
${PREFIX}/share/doc/exim/POST-INSTALL-NOTES
${INSTALL_DATA} ${FILESDIR}/POST-INSTALL-NOTES ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/filter.txt ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/oview.txt ${PREFIX}/share/doc/exim
${INSTALL_DATA} ${WRKSRC}/doc/spec.txt ${PREFIX}/share/doc/exim

View file

@ -24,11 +24,13 @@ In addition, a comprehensive FAQ list is available at:
To use Exim instead of sendmail:
1) Create exim/configure from exim/configure.default .
2) Stop the sendmail daemon.
3) Adjust mailer.conf(5) as appropriate.
4) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
5) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
*) Create exim/configure from exim/configure.default .
*) Clear the sendmail queue and stop the sendmail daemon.
*) Adjust mailer.conf(5) as appropriate.
*) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
*) Set the 'daily_status_include_submit_mailq' periodic.conf(5) variable
to 'NO'.
*) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
You may also want to configure newsyslog(8) to rotate Exim log files:

View file

@ -1,37 +0,0 @@
The following documentation has been installed:
info 'Exim Overview' -> Overview of Exim
info Exim -> Exim Specification (User Guide)
info 'Exim Filtering' -> Exim Filter Specification (for end-users)
In addition, plain text versions of these documents have been installed
as:
${PREFIX}/share/doc/exim/oview.txt
${PREFIX}/share/doc/exim/filter.txt
${PREFIX}/share/doc/exim/spec.txt
Postscript, PDF and HTML versions of these documents are available in
the ports tree as:
ports/mail/exim-doc-postscript
ports/mail/exim-doc-pdf
ports/mail/exim-doc-html
In addition, a comprehensive FAQ list is available at:
http://www.exim.org/
To use Exim instead of sendmail:
1) Create exim/configure from exim/configure.default .
2) Stop the sendmail daemon.
3) Adjust mailer.conf(5) as appropriate.
4) Set the 'sendmail_enable' rc.conf(5) variable to 'NO'.
5) Start exim with '${PREFIX}/etc/rc.d/exim.sh start'.
You may also want to configure newsyslog(8) to rotate Exim log files:
/var/log/exim/mainlog mailnull:mail 640 7 * @T00 Z
/var/log/exim/rejectlog mailnull:mail 640 7 * @T00 Z