the vendor. For the port the important changes are:
* parallel building is back
* p7zip is now used to extract the distfile -- lzma used earlier
caused problems, because two different lzma-archivers exist
(conflicting ports). p7zip is also wider known and supports
more compression methods.
The p7zip-part was
Submitted by: Neil Darlow
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
Notable changes:
1. Pick the .lzma version of the vendor's distfile. Although
adds archivers/lzma to EXTRACT_DEPENDS, the savings make
it worth the trouble.
2. Disable parallel build, until the vendor figures out, what
broke it.
3. Disable use of our libtool -- somehow that does not work
any more. It would be nice, if our libtool-maintainers could
look into it -- just uncomment the relevant line in the new
Makefile and attempt building.
4. Most of the things are now installed into "versioned" directories:
"ImageMagick-6.4.0" instead of "ImageMagick".
5. API-headers now go into ${PREFIX}/include/ImageMagick instead of
directly into ${PREFIX}/include. This will make co-existence with
GraphicsMagick much easier.
upstream. The tests should work with and without X11. Enable FPX by
default. Resolve all related PRs.
Approved by: portmgr (linimon)
PR: 67815
PR: 117635
PR: 116874
PR: 114387
never dependencies before, so official packages never contained the
support, but if a local system had them installed, ImageMagick would try
to use them -- and sometimes fail.
Also add a patch, that modifies the module-searching algorithm from
/always/ checking the compiled-in constant path, to only checking it, if
an environment variable is not set. This fixes a problem with testing,
where a module installed by an earlier version of the software could be
used by the newly built version, that's being tested.
This port has too many options -- perhaps, support for the most common
things (like PNG, JPEG, and GIF) should be permanent...
it goes into a frenzy consuming all available memory before actually
reporting an error and exiting.
Try to reduce the impact of this cascading failure by running the tests
under a limit of 20m of memory. In "good" builds that seems to be enough.
too buggy for general use :(
Initiate the lists of options whose presence (or absence) break
self-tests, and set IGNORE, if any such conflict is found.
Reported by: numerous
We don't need to bother with the situations, when /etc/make.conf, etc.
are updated between configure and build.
The way things are now, linking might break in certain cases because
LDFLAGS is set to empty string (instead of being unset).
Notified by: Pierre Guinoiseau
maintainership -- with the previous maintainer's approval.
Remove explicit requirements for shared library major numbers of
dependencies. Like in almost all other ports, these quite gratuitous.
Scale the build to multiple CPUs, if available on the building
system.
Automatically run vendor's self-tests (unless disabled via OPTIONS).
Apply DOS2UNIX to a number of files including the HTML pages.
NB: ImageMagick's configure tries to detect an OpenMP-capable compiler.
This /may/ be a problem, when gcc-4.2 (such as on 7.x) or greater is
used... An explicit `--disable-openmp' may be needed...
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
- SVG support requires X11 support, so mark as IGNORE if WITHOUT_X11
is defined [2]
- Correct set CPPFLAGS for fontconfig, librsvg, and graphviz [3]
PR: ports/109862 [2], ports/110141[3]
Submitted by: rafan [1], chinsan [2], Maxim Samsonov <xors at mne.ru> [3]
Approved by: shuan
Switch to gs-afpl as default one checked. IM needs newer gs for some
operations and gs-gnu is too old.
Add without-dps option by default since Xorg does not have required
DPS library anymore. DPS is poor choice in any case because renders first
page only. When DPS is off, gs automatically used, which is the right thing.
Approved by: shaun (maintainer)
This commit should largele be a NOOP as it only adds support
for DESTDIR undefined. This does allow us to start testing
ports with DESTDIR set, but this is as of yet not supported.
Although this has been extensively tested on pointyhat, this
is a very intrusive change and some cases may have been
overlooked. Please contact Gabor and me if you find any.
PR: 100555
Submitted by: gabor
Sponsored by: Google Summer of Code 2006
- Fix detection of librsvg and add knob to enable/disable
- Fix leftovers when set many combinations of WITH/WITHOUT
- Respect CFLAGS/LDFLAGS
- Bump PORTREVISION since have default features that now are detected property
Pointy hat to: me
Approved by: maintainer timeout (on past commit)
Tested by: many and me on all day
Using 'convert' utility, even on basic operations causes
job to be done, but command exits via receiveing SEGFAULT
signal.
Using new version of ImageMagick (6.2.5-5), convert utility
works as expected.
This problem also applies to pecl-imagick. And of course
is also solved by this port update
/etc/make.cof is empty during port install
Also included an update to libMagick.so.9!
Submitted by: Piotr Rybicki <meritus@innervision.pl>
Approved by: Arjan van Leeuwen <avleeuwen@piwebs.com>
PR: ports/91270
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
- fixes a security vulnerability
Reported by: simon
Security: http://vuxml.freebsd.org/713c3913-8c2b-11d9-b58c-0001020eed82.html
- change logic in WITH_WMF/WITHOUT_WMF because of dependencies on X11 and ImageMagick modules
Reported by: Joan Picanyol i Puig <lists-freebsd@biaix.org>
PR: ports/78454
Submitted by: Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
- Add fruitsalad.org mirror to prevent fetch problems in case ImageMagick
decides to update again
- Don't install/append to perllocal.pod [1]
PR: ports/74928
Submitted by: Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
Reported by: pointyhat via kris [1]
overwriting files installed by libltdl port. Stop it.
Warning: people who installed ImageMagick 6.1.6.0 or 6.1.6.0_1 should
probably run
portupgrade -f libltdl
after updating ImageMagick to recover original libltdl files.
PR: ports/74875
Submitted by: Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
Reported by: Neil Darlow <neil@darlow.co.uk>
o Adios --enable-lzh. This was obsoleted from 6.0.3-3 or above. [1]
o Utilize libtool15.
Pointed out by: sf [1]
Approved by: Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
freetype2 support properly (unless WITHOUT_IMAGEMAGICK_TTF is not
defined).
Patches have been sent to the developer forum. Hopefully the next
version to 6.0.0 will include the fix.
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
ended up in the distribution. Be sure to remove the .c, so it gets
re-generated from Magick.xs by the Perl installed on the system. It used
to work for -current, where Perl happened be similar enough to that of
Christy, but broke PerlMagick for (some?) -stable users, where Perl's
API is different.
format on or before July 2002:
http://studio.imagemagick.org/pipermail/magick-users/2002-July/003703.html
Indeed, the HDF bits are commented out in the package's
configure/autoconf and none of the utilities installed by the port
actually link with HDF.
Rather than bump PORTREVISION, upgrade to the 5.5.7.16 (from .15).
Prompted by: troubles with HDF and amd64
o Utilize USE_GNOME
o Install pkgconfig .pc file to correct place
o Support alternative PTHREAD_LIBS difinition
PR: ports/57592
Submitted by: Ports Fury
o Removed two (now obsolate) libtool version patches
as ImageMagick now uses internal version system for
them starting from 0:0:0 (5.5.8 will become 0:1:0),
also MAJOR_VERSION/MINOR_VERSION/MICRO_VERSION
variables removed from the source.
o Removed two other patches as now they are already
embedded to the source.
o Updated plist to reflect separate Q8/Q16 folder
installations based on selection while installing.
Also Makefile modifed to reflect this.
Minor cleanup MASTER_SITES.
Utilize PLIST_SUB from post-install:
PR: ports/55274 (Update to 5.5.7-10) [1]
Submitted by: Erdener Gonenc <ergonenc@artemis.efes.net> [1]
Reviewed by: Rob Lahaye <lahaye@snu.ac.kr>
`LIB_DEPENDS+=', to prevent this port from getting built without tiff
support, which wasn't intended. (Luckily jpeg and png were enabled via
other indirect dependencies)
This should fix some dependent ports such as ruby-rmagick.
o Removed two (now obsolate) libtool version patches
as ImageMagick now uses internal version system for
them starting from 0:0:0 (5.5.8 will become 0:1:0),
also MAJOR_VERSION/MINOR_VERSION/MICRO_VERSION
variables removed from the source.
o Removed two other patches as now they are already
embedded to the source.
o Updated plist to reflect separate Q8/Q16 folder
installations based on selection while installing.
Also Makefile modifed to reflect this.
PR: ports/55274 [1]
Submitted by: Erdener Gonenc <ergonenc@artemis.efes.net> [1]
Pointed out by: Rob Lahaye <lahaye@snu.ac.kr>
allow to put them in /etc/make.conf
Handle threaded case using WITH_IMAGEMAGICK_PERL
Turn JPEG on by default, distributed ImageMagick binary is little
usable without it.
o Remove VERSION number from both directory and library names (e.g.,
libMagick++-5.5.1.so becomes libMagick++.so)
o Add a library version number back; thus, fixing library dependencies
which require this port to have a library version number. Current
number is 5 (e.g., libMagick++.so.5)
o Update PLIST accordingly
-stable :-( Upgrade the port to the latest to compensate.
The port now installs things in version specific directories, so
add the version number to PLIST_SUB.
Remove USE_REINPLACE -- the port uses PERL anyway.
As usual, the hardest thing to do is to fix the pkg-plist.
