These ports used to cause linker errors but this is not longer the case
with current BIND ports. Tested with dns/bind9 and dns/bind96.
PR: ports/136111
Submitted by: Rob Austein <sra AT hactrn.net>
With hat: gecko
infrastructure ports to Mk/bsd.linux-apps.mk and add missing
dependecies on these to the ftp/linux-f10-curl port. (They are
needed for www/linux-f10-flashplugin10 to be committed next.)
- Bump ftp/linux-f10-curl PORTREVISION
The default is switched for OSVERSION >= 800076 (when the last known
issue was fixed at the base system). From now the default linux
base port is linux_base-f10. Default linux infrastrucure ports
are linux-f10-*.
HEADSUP to current@ is comming.
Exp-run by: portmgr (pav)
we were linking the ruby binary against pthreads, and the default
stack size detection method with getrlimit didn't returned right
values in this case. Now, if threads enabled, it also tries to
determine the stack size via pthreads calls and use this value if
it is smaller than what getrlimit returned. Furthermore, the stack
overflow detection routine now works proactively, generating
exception if there're probability the stack will be exhausted by
the time of the next check (ruby performs checks only in each 256th
call of rb_call0). [1]
- Build pthreads-enabled ruby by default. I have not received any
bug reports for this for years, and this verison will work correctly
with threaded libraries. Also, do not link agains pthreads in non-pthread
case (this breaks stack size detection algorithm), and eliminate the
option to disable pthreads (so only power users who know what they're
doing can disable them).
- Build RDoc by default so it is available in the package.
- Bump portrevision.
PR: ports/132158
Reported by: Eugene Pimenov <libc@libc.st>
been triggered by portupgrade which uses finalizers to remove lockfiles.
- Fix the bug in URI module that smashed uri paths in merge method for
ftp uris. [1]
- Fix segmentation fault when cloning objects with dynamically created
methods (via instance_eval). [2]
PR: ports/131775 [1], ports/135533 [2]
Submitted by: Yoshisato YANAGISAWA <osho@pcc-software.org> [2],
Helmut Schneider <jumper99@gmx.de> [1],
Jaakko Heinonen <jh@saunalahti.fi> [1],
Peter Hofer <ph@desktopbsd.net> [1]
Obtained from: ruby_1_8 svn tree (rev 22679) [2]
modular xorg.
- supply corresponding USE_XORG for all imake-using ports that need it
- USE_IMAKE no longer implies USE_XLIB in absence of USE_XORG
- retire USE_X_PREFIX which is not really used anywhere after the
above change
- a few minor nits like whitespace and SF macro
Tested by: 2 tinderbox runs by pav
Approved by: portmgr (pav)
PR: ports/135083
Submitted by: ed
- Separate MAKE_JOBS_NUMBER from _MAKE_JOBS, so it can be used in
individual ports
PR: ports/134977
Submitted by: David Naylor <naylor.b.david@gmail.com>
This updates also borrows some important bugfixes from Ruby CVS that
is not available in patchlevel 160 yet.
- Drop GC patch support. It is broken with the new ruby version and
seem to require the complete rewriting.
Those ports are intended to be used with 8-CURRENT at least
with SVN r192206.
If you want to switch to linux-f10 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f10
OVERRIDE_LINUX_NONBASE_PORTS=f10
An upgrading procedure is shown at /usr/ports/UPDATING, entries 20090401
and 20070327.
For the first time all tested linux ports work as expected(!):
. acroread8;
. google-earth;
. skype;
. seamonkey.
Many thanks for kernel folks who really did the main work
(and I wrote only some lines of ports).
There is a good chance that those ports may become a default
for 8.0-RELEASE. Please, test and report back to emulation@ ML.
the system (typically FreeBSD prior to 6.3). Allows to continue if the write
fails. This should allow us to start using it widely in the ports tree
(please not just yet, wait for a heads-up, in case this change needs to be
backed out.)
See original release announcement for details:
http://kde.org/announcements/announce-4.2.3.php
New ports:
devel/kdebindings4:
Meta port of KDE bindings for C#, Java, PHP, Python and Ruby.
Currently only Python bindings are supported.
devel/kdebindings4-python, devel/kdebindings4-python-krosspython,
devel/kdebindings4-python-pykde4:
Python bindings for KDE.
print/kdeutils4-printer-applet:
printer-applet is a system tray utility. It shows current print jobs,
shows printer warnings and errors and shows when printers that have
been plugged in for the first time are being auto-configured by
hal-cups-utils. It replaces kjobviewer in KDE 3.
print/system-config-printer-kde
A port of Gnome system-config-printer to KDE.
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
Linux Fredora 8 infrastructure ports should be used if:
. sysctl compat.linux.osrelease is 2.6.16;
. linux base port is set to f8 or f9;
. linux infrastructrue is used.
Remove _F8_COMPATIBLE_LINUX_BASE_PORTS for now (it will
be reintroduced later).
Please note, that there is no strict dependency upon OSRELEASE so far.
for linux_base-f8 and above. Don't define RUN_DEPENDS for those components
if OVERRIDE_LINUX_NONBASE_PORTS is not defined. That should unbreak
index for default configurations.
Corresponding ports will be committed shortly.
Those components are needed to run the upcomming
www/linux-f8-flashplugin10.
Please note, that there are only linux -f8- ports,
no -fc4- infrastructure ports are available.
. add a variable _F8_COMPATIBLE_LINUX_BASE_PORTS, it's a list
of linux base ports compatible (i.e. may be used) with
linux -f8- infrastructure ports;
. define apropriate _LINUX_BASE_SUFFIX;
. let ports with AUTOMATIC_PLIST=yes use the new value;
. add some comments about those changes.
which got lost with the switch to bsd.gecko.mk:
Work around the miscompilation/mislinkage problem of the sCanonicalVTable
hacks in the XPCOM string code on sparc64 by omitting the code in question
and bump PORTREVISIONs accordingly.
Approved by: marcus
o Update randrproto, libXrandr and xrandr to 1.3.0
o Update xf86-video-intel to 2.6.3
o Update other less common drivers as needed
o Mark a bunch of un-maintained input drivers ignored
o Update the various slave X server ports as well
The recommended version of FreeBSD to use them is 8-CURRENT.
FreeBSD-7.x is not fully compatible with compat.linux.osrelease
2.6.16. Some syscalls cannot be MFCed due to native FreeBSD
ABI breakage.
Usage (and package building):
1. define compat.linux.osrelease=2.6.16;
2. add following variables to /etc/make.conf:
. OVERRIDE_LINUX_BASE_PORT=f8;
. OVERRIDE_LINUX_NONBASE_PORTS=f8.
Approved by: bsam (me) ;-)
- Set INSTALL_TARGET for cmake based ports to install/strip. This solves
problem of installing non-stripped binaries (noticed by delphij for KDE4 ports)
- Fix linking to -lpthread for cmake based ports (KDE4 ports are affected mostly)
regression and density estimation. It is software linked to the
book 'Applied Smoothing Techniques for Data Analysis: The Kernel
Approach with S-Plus Illustrations' Oxford University Press.
WWW: http://www.stats.gla.ac.uk/~adrian/sm
PR: ports/132770
Submitted by: Wen Heping <wenheping at gmail.com>
passed to the top level vendor Makefile in build stage, where X is number of
CPU cores by default. The whole system is opt-in, ie. ports need to be enabled
individually. There is a global override available for adventurious users.
both current (fc4) and future linux (f8) distributions at one
ports tree.
The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.
The idea was taken from bsd.gnome.mk and others.
More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.
Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.
Other changes are coming. Stay tuned!
PR: ports/132510
Submitted by: bsam (me)
Exp-run by: portmgr (pav)
automatic redirection to one of the mirrors. As mirrors might take
some time to catch up with changes, as a last resort, try the
noredirect download area of the server.
