- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
Jenkins squawked about invalid shebangs after the previous update so a
fix has been provided which involves a dependency on perl.
PR: 190482
Submitted by: Yashuhito FUTATSUKI
Reported by: swills (Jenkins)
The nxml editor sets IGNORE for emacs23 and emacs24 since its
functionality is incorporated into those versions of emacs. It was
meant to be used with emacs21 or emacs22, but since those ports were
recently removed, IGNORE is set in all cases.
This port is unstaged, so it would have been reset and deprecated in any
case soon.
nva-m17n has a configure option to set default multibyte encoding. It has
also the option to support Canna japanese Kana-Kanji conversion system.
Those options were supported on ports in chinese, japanese and korean
categories, before 2011-05-02, expired when patch distribution site
disappeared, but these localized port didn't revive the option when the
port was revived. This patch makes the options selectable.
PR: 190482
Submitted by: Yasuhito FUTATSUKI
warnings and to improve performance. The compiler warnings were fixed some
time in 4.1.x but the local patch remained for performance. Today I was
notified by an upstream developer that it may have interoperability issues
with other dBase III implementations because the original implementation had
512-byte fixed-size blocks. We better be safe than sorry.
2014-07-01 security/sudosh3: Funcition replaced by sudo -s
2014-07-01 security/sudosh: Funcition replaced by sudo -s
2014-07-01 security/sudosh2: Funcition replaced by sudo -s
2014-07-01 lang/pike76: Outdated: Users should switch to lang/pike78
2014-07-01 editors/gummi: Builds fine but the program itself is unusable
Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]
JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
anymore at run-time.
PR: 185462 [1]
PR: 187548 [2]
PR: 182793 [3]
PR: 181746 [4]
PR: 176047 [5]
PR: 190814 [6]
Submitted by: c.petrik.sosa@gmail.com [1]
Matthieu Volat <mazhe@alkumuna.eu> [2]
free.bsd@webstyle.ch [3]
andrnils@gmail.com [4]
rfg@tristatelogic.com [5]
Michelle Sullivan <michelle@sorbs.net> [6]
Approved by: portmgr (blanket) (for NO_STAGED ports)
- Fix JAVA option. A distfile was missing.
- Work around INSTALLS_ICONS issues. Icon caches were not properly updated.
- Tidy up bash completion installation.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream. Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.
Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix. Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS. This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.
PR: 190592
Exp-run by: antoine
Approved by: portmgr (antoine)
- Speed staging phase by really installing to the stagedir directly
- Rework to use predefined targets for build and install
- Strip binaries
- Remove now unnecessary dependencies on autotools
- Add patches to fix crashes with icu 53.1
Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.
PR: 190681
Submitted by: mat
Exp-Run by: antoine
Sponsored by: Absolight
It's possible that EXTRACT_CMD won't be predefined in the near future
in order to support distfiles in multiple formats. We know the post-
extraction tool needs to be tar, so let's specify it directly.
USES=zip is required when at least one distfile is a zip archive, unless
the after-extraction arguments are tailored for ${TAR}
Approved by: general infrastructure blanket
2014.05.28 - This release contains
many many improvements to the core system, including
substantial improvements to the undo/redo code, UTF-8
handling, the configure script, and display of shortcuts
on very wide terminals, New features include the
ability to read named pipes (--noread), as well as
linter support (see the nanorc man page for details). Also
included are much improved syntax highlighting code, and
configurations for JSON, texinfo, Go, and a default syntax
for catch all highlighting. Finally, nano now has the
ability to set the color of the title bar, status bar, and
shortcut keys (e.g. "^X") and their descriptions. Again
see the nanorc page for details.
lang/lua51 is working the same way lang/lua52, chase ports using lua 5.1
Make the default lua lua52
Make all lua ports using USES=lua
Approved by: portmgr (implicit)
from the work or stage directory instead of a previously installed library.
In pseudo code:
s,PLUGIN_LIBS="$PLUGIN_LIBS -Lsrc -labiword",
PLUGIN_LIBS="src/libabiword.la $PLUGIN_LIBS",
s,foo_LIBS="$foo_LIBS $PLUGIN_LIBS",
foo_LIBS="$PLUGIN_LIBS $foo_LIBS",
The initial value of PLUGIN_LIBS may contain -L/usr/local/lib so it would
have to come after -Lsrc, but -Lsrc is not correct when libtool relinks
plugins during staging so use src/libabiword.la and let libtool figure out
what flags are needed. Secondly, switch around foo_LIBS and PLUGIN_LIBS
because foo_LIBS may contain -L/usr/local/lib.
- Respect CFLAGS during build
- Use REINPLACE_CMD, SUB_FILES to simplify substitutions
- Rename patches to proper names
- Break lines around 80 characters
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
upstream forgot to regenerate the build scripts. This makes the build use
the correct version information and causes a library version bump. Use
this opportunity to use USES=libtool instead of USES=libtool:oldver.
Bump PORTREVISION on all dependent ports and convert them to USES=libtool
where needed. Also use USES=(gmake, pathfix, tar) and new LIB_DEPENDS
syntax here and there.
games/freedink-engine:
- Option helpers.
- Staging.
- Use dirrmtry for locale directories.
games/oolite:
- Staging.
- Replace ECHO with ECHO_CMD.
- Don't use GNUSTEP_PREFIX to install files because it expands to
LOCALBASE rather than PREFIX.
games/openssn:
- Remove USES=desktop-file-utils. No MimeType field in desktop file.
- Staging.
- Install files in standard DATADIR.
games/xblast:
- Use proper options.
- Staging.
- Patch configure so normal make install can be used instead of do-install.
- Replace TAR | TAR with COPYTREE_SHARE.
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
- in x11-toolkits/scintilla, leverage USES=compiler to check if
we're on clang or gcc
PR: ports/188782, ports/188783
Submitted by: Naram Qashat <cyberbotx@cyberbotx.com> (maintainer)
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
These ports will fail configuration if gnome-doc-utils is not present.
Likely a common dependency loaded it in the past, but not anymore.
Explicitly list gnome-doc-utils as a build dependency in order to
fix the recent breakage of these ports.
Also reset maintainership of etherape - maintainer gone for more than
one yet now.
Approved by: portmgr (bdrewery)
2014-03-10 www/p5-CGI-modules: No more public distfiles
2014-04-10 www/p5-WWW-Link: Depends on expired www/p5-CGI-modules
2014-03-10 www/sbox-dtc: No more public distfiles
2014-04-10 sysutils/dtc: Depends on expired www/sbox-dtc
2014-03-10 textproc/glimpse: No more public distfiles
2014-04-10 ftp/ftplocate: Depends on expired textproc/glimpse
2014-04-10 misc/tkman: Depends on expired textproc/glimpse
2014-04-09 devel/asl: Unmaintained since 1997
2014-04-09 net/pcnfsd: Unmaintained since 1997
2014-04-10 cad/chipmunk: Unmaintained since 1999
2014-04-10 graphics/comix: Insists on installing in /usr/local, and uses nautilus2 which is deprecated.
2014-04-10 www/mambo: Broken for more than 6 months
2014-04-10 devel/lua-rds-parser: Broken for more than 6 months
2014-04-10 editors/the: Unmaintained since 1999
2014-04-10 japanese/exmh2: Unmaintained since 1999
2014-04-10 net/freewais-sf: Unmaintained since 1999
2014-04-10 editors/elvis: Unmaintained since 1999
2014-04-10 japanese/sed: Unmaintained since 1999
2014-04-10 x11-fm/xfm: Unmaintained since 1999
2014-04-10 print/rtf2latex: Unmaintained since 1999
2014-04-10 graphics/fbm: Unmaintained since 1999
2014-04-11 devel/p5-Penguin-Easy: Unmaintained since 2000
2014-04-11 emulators/prodosemu: Unmaintained since 2000
2014-04-11 security/gtkportscan: Unmaintained since 2000
2014-04-11 graphics/xmfract: Unmaintained since 2000
2014-04-11 databases/xmbase-grok: Unmaintained since 2000
2014-04-11 emulators/svr4_base: Unmaintained since 2000
2014-04-11 math/freefem: Unmaintained since 2000
2014-04-11 graphics/tiff2png: Unmaintained since 2000
2014-04-11 math/wingz: Unmaintained since 2000
2014-04-11 lang/STk: Unmaintained since 2000
2014-04-11 graphics/kdc2tiff: Unmaintained since 2000
2014-04-11 math/xlispstat: Unmaintained since 2000
2014-04-11 databases/typhoon: Unmaintained since 2000
2014-04-11 graphics/dc20ctrl: Unmaintained since 2000
2014-04-11 www/fhttpd: Unmaintained since 2000
2014-04-11 graphics/xmorph: Unmaintained since 2000
2014-04-11 editors/axe: Unmaintained since 2000
2014-04-11 www/cgic: Unmaintained since 2000
