- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
Since psm has gained write(2) support, it can be directly driven by X.org
input drivers without help of moused(8) or SysMouse protocol.
- Fix regressions without moused running.
PR: ports/122363, ports/122405
- Do not probe /dev/psm0 as SysMouse if HAL support is enabled.
- Add /dev/ums0 as SysMouse if HAL support is disabled.
- Do not force sysmouse(4) mode unless device is /dev/sysmouse. When
moused(8) is not running, current mode level is untouched.
- Correcly check if moused is actually running. Checking pid file is
not enough because it may be /var/run/moused.<device>.pid when it is
invoked by devd(8) for USB mice.
- Do not attach device if it is opened by moused.
- Correctly add device path for HAL.
This patch is tested with many possible combinations of moused(8), HAL,
PS/2 mouse, USB mouse, and xorg.conf.
Tested by: cokane, jkim, marcus,
Matthew Seaman (m dot seaman at infracaninophile dot co dot uk)
CLOCK_MONOTONIC is available.
- If FreeBSD-specific CLOCK_MONOTONIC_FAST is available, use it
instead of precise but slow gettimeofday(2) or CLOCK_MONOTONIC.
Reviewed by: stable, x11
- Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25.
I hope that nobody will be bored enough on Christmas to remove them on
that day.
Tested by: vehemens, Rene Ladan, Beech Rintoul, sarek on x11@
Xrender from XFree86 that takes endianess into account. This should fix
the following errors on FreeBSD/sparc64:
'RenderBadGlyphSet (invalid GlyphSet parameter)'.
(Details: serial 8980 error_code 178 request_code 153 minor_code 24)
Submitted by: marius
X.org CVS to avoid failure to load this driver because of unresolved
symbols.
Digged up and tested by: Matthias Muthmann
PR: sparc64/94886
Obtained from: X.org CVS
work properly this time on FreeBSD/sparc64 so stop using workaround that
defaults to old 'keyboard' one and remove erroneous patch by me.
Pointed out by: Matthias Muthmann (mmuthmann at gmx.net)
Tested by: Matthias Muthmann (Ultra10/type5c), me (Ultra5/type5)
Obtained from: Xorg CVS
[2] Add the PCI ID for Radeon X600, 0x5B62 to a place that was missed.
PR: [1] ports/32121
Submitted by: [1] alane
[2] Vladimir Kushnir <vkushnir@i.kiev.ua>
This makes PCI video cards work that hang off directly from
the Host-to-PCI bridge in machines like the Blade 100. [1]
- Default to old 'keyboard' driver for sparc64. Patches for 'kbd'
one were not enough so until new driver is fixed, this change
makes Xorg work with sparc64 keyboards. Knob WITH_SPARC_KBD is
provided to ease efforts of fixing 'kbd'.
Submitted by: marius [1]
Release notes are available at
http://www.x.org/X11R6.8.2/doc/RELNOTES.html
Thanks to kris and krion for running several cluster test builds,
maintainers of GNOME for prompt responses, portmgr for postponing ports
freeze for this update, testers on FreeBSD-X11@ list and others that I
might have mised here.
Also included:
- fix for ATI Mobility on Dell Inspiron 7500 (obtained from Marc Aurele La
France; obtained and tested by julian)
- fix for kbd driver on Sparc64 (tested by Aaron Dudek, Michael G. Jung and
Matthias Muthmann), which still appears to have problems with some
keyboards - so
- fix for kbd driver on PC98 (reported and tested by NAKAJI Hiroyuki; PR
ports/77217)
- fix for i810 on HP D530 (obtained from Egbert Eich; obtained and tested
by Anders Nor Berle; PR ports/74757)
[2] Put the manpages from section 4 under 4x. For example, you can do
"man 4x vga" to get the X vga(4x) manpage, still do man 4 cirrus to get
cirrus(4x), and man -a vga to get both vga manpages.
[3] Apply several important-looking fixes to ATI drivers from the stable branch:
- Fix mode setting with Mach64 on some laptops.
- Don't crash with mach64 for some PCI configurations
- Improve hang detection on r128s. (may improve speed in DRI, too)
- Avoid a hang on server regen on r128 with DRI.
- Fix the DynamicClocks support, which could have caused hangs with DRI on
original Radeons.
PR: [2] ports/25576
Submitted by: [2] fanf
Requested by: [1] peter
Obtained from: [3] XORG-6_8-branch
change that occurred.
[2] Install the xorg.conf referred to by xorg.conf(5). Installation was
disabled during the XF86 name avoidance phase, but could still be of use.
[3] Add a section about the Composite extension to xorg.conf.
[4] Add MakeDllModules YES to the WITH_DEBUG flag's options. While it won't
package correctly, you can't actually debug modules (where crashes almost always
happen) without it.
[5] Merge fixes from XORG-6_8-branch for i810 driver crashes in on CloseScreen,
ringbuffer lockups, and various warnings.
[6] Recognize R_ALPHA_SREL32 relocation type in elfloader.
PR: [1] ports/75425
[2] ports/73915
[6] ports/73257
Submitted by: [1] Marc Silver, marcs at draenor dot org
[2] Frank J. Laszlo, laszlof at vonostingroup dot com
[6] Ken Stailey kstailey at yahoo dot com
[6] r1.4 of X.Org CVS.
Approved by: portmgr
DRI drivers are incompatible with the old libGL in XFree86, they have been
repocopied to graphics/xfree86-dri. Also note that with this commit the html
manpages are going away, and with it the runtime dependency on perl for the
imake port.
Release notes at: http://www.x.org/X11R6.8.1/RELNOTES.txt
Props to: kris (multiple cluster runs and sorting through logs)
lesi (fixing all the issues in those logs, and more)
Fix package list (partly [2]).
PR: ports/69790 [1], ports/70376 [2]
Submitted by: Andreas Kohn (andreas AT syndrom23.de) [1]
John R. Makosky (jrm-spam1 AT crackpot.org) [2]
Approved by: anholt (mentor)
