- Use USE_LDCONFIG
Overall changes:
- Compile with -fpic instead of -fPIC (potentially smaller code size)
- Add a schematics file for the hardware receiver in FidoCadJ format
- Language and typographical updates to README.md
- Several signed/unsigned/size fixes
Library changes:
- Extract generic third-party code for bits 1..14 from decode_alarm.h into a
new file bits1to14.h
- Convert almost all calculations for decoding the live signal into integer
operations, drop fields 'a', 'frac', and 'maxone' from struct bitinfo.
- New function setclock_ok() in setclock.h
- New functions get_acc_minlen(), add_acc_minlen(), reset_acc_minlen() in
decode_time.h. The accumulated minute length is now a first-class entity.
When decoding the live signal, increment it more precisely than just 1000 ms/s
to prevent drift during bad radio reception.
- New functions dcftime() and isotime() in decode_time.h. Use the latter in
setclock.c
- Check input values of etc/config.txt:
- hw.active_high must be 0 or 1
- hw.freq must be even between 10 and 666666
- Reset the values of bit0 and bit20 if the latter becomes smaller than the
former, show this in the log file using a '!'
- Compact the signal buffer, it now stores 8 pulses per byte instead of just 1.
Client changes:
- Make dcf77pi and dcf77pi-analyze more agnostic of the contents of the
third-party contents
- Update display code of dcf77pi and readpin for the updates to the live signal
decoding
- Show in dcf77pi when the value of bit20 underflows
- Update the code to display the signal buffer in readpin
- Fix readpin to properly clean up when receiving a SIGINT
- Fix installation of lib/libspandsp.so.2 (when patching configure.ac
almost all USE_AUTOTOOLS are needed)
- Replace CONFIGURE_ARGS with CPPFLAGS/LIBS
Reported by: antoine
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
didn't conflict with early development versions of glib/gtk 2.0
Remove patches and hacks that were used to work around the previous
situation
This allows to stage more ports as a regular user
Differential Revision: https://reviews.freebsd.org/D703
Reviewed by and discussed with: bapt
With hat: portmgr
- Important Bug Fixes and Additions
Fixed shutdown in message passing apps
Fixed PortAudio detection during configuration
Fixed QWT detection during configuration
Fixed gr::analog::agc3 volk kernel alignment
Fixed/improved support of audio on OSX
Improved performance on network-based sources and sinks
Fixed pfb_arb_resampler tag propagation
Fixed segfault in fast_atan2f
Updated codec2 support to latest standard and support all rates
New HDLC codec blocks in gr::digital
- Bump dependent ports as .so version has changed
- Use install-strip target instead of STRIP_CMD
- Add/fix libspandsp.so versions in LIB_DEPENDS to differentiate between spandsp and spandsp-devel
Approved by: portmgr blanket
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
for new Berkeley DB, but are untested.
NOTE: please read UPDATING and the Wiki page before proceeding!
Announcement: http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference: https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR: 192690
Approved by: portmgr (implicit, PORTREVISION bump on unstaged ports)
rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:
- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
(which are still fetchable from rubygems.org)
The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.
Phabric: D591
With hat: ruby
Approved by: portmgr (because of committing to unstaged graphics/mingplot port)
PR: 189222
Submitted by: Johan (stromnet.se)
OWFS -- 1-Wire file system.
OWFS is an easy way to use the powerful 1-wire system of Dallas/Maxim.
OWFS is a simple and flexible program to monitor and control the physical
environment. You can write scripts to read temperature, flash lights, write
to an LCD, log and graph, ...
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
PR: 189221
Submitted by: johan (stromnet.se)
Allows access to Telldus Tellstick USB dongles for communicating with
433MHz devices in your home.
Provides "telldusd", the daemon which keeps track of your tellstick
devices. Through a UNIX socket, the sensors and devices can be used/
controlled from the command line tool "tdtool", or via the libtelldus-core
C client library.
