This adds a new ports option, IPSET, defaulting to on.
Use the opportunity to use the options helpers OPT_CFLAGS[_OFF] on the
trivial options.
PR: 217900
Submitted by: Oliver Pinter <oliver.pinter@hardenedbsd.org>
version 2.74
Fix reversion in 2.73 where --conf-file would attempt to
read the default file, rather than no file.
Fix inotify code to handle dangling symlinks better and
not SEGV in some circumstances.
DNSSEC fix. In the case of a signed CNAME generated by a
wildcard which pointed to an unsigned domain, the wrong
status would be logged, and some necessary checks omitted.
Remove @dir* stuff from pkg-plist. @sample isn't documented properly
and isn't up to handling files with non-.sample suffix, so stay
away from that part of pkg-plist.
ChangeLog: http://www.thekelleys.org.uk/dnsmasq/CHANGELOG
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc
version 2.71
Subtle change to error handling to help DNSSEC validation
when servers fail to provide NODATA answers for
non-existent DS records.
Tweak code which removes DNSSEC records from answers when
not required. Fixes broken answers when additional section
has real records in it. Thanks to Marco Davids for the bug
report.
Fix DNSSEC validation of ANY queries. Thanks to Marco Davids
for spotting that too.
Fix total DNS failure and 100% CPU use if cachesize set to zero,
regression introduced in 2.69. Thanks to James Hunt and
the Ubuntu crowd for assistance in fixing this.
Fix crash, introduced in 2.69, on TCP request when dnsmasq compiled
with DNSSEC support, but running without DNSSEC enabled. Thanks to
Manish Sing for spotting that one.
Fix regression which broke ipset functionality. Thanks to Wang Jian
for the bug report.
Submitted by: Herbert J. Skuhra
Fixes bind-interfaces with IPv6 on FreeBSD.
version 2.68
Use random addresses for DHCPv6 temporary address
allocations, instead of algorithmically determined stable
addresses.
Fix bug which meant that the DHCPv6 DUID was not available
in DHCP script runs during the lifetime of the dnsmasq
process which created the DUID de-novo. Once the DUID was
created and stored in the lease file and dnsmasq
restarted, this bug disappeared.
Fix bug introduced in 2.67 which could result in erroneous
NXDOMAIN returns to CNAME queries.
Fix build failures on MacOS X and openBSD.
Allow subnet specifications in --auth-zone to be interface
names as well as address literals. This makes it possible
to configure authoritative DNS when local address ranges
are dynamic and works much better than the previous
work-around which exempted contructed DHCP ranges from the
IP address filtering. As a consequence, that work-around
is removed. Under certain circumstances, this change wil
break existing configuration: if you're relying on the
contructed-range exception, you need to change --auth-zone
to specify the same interface as is used to construct your
DHCP ranges, probably with a trailing /6 like this:
--auth-zone=example.com,eth0/6 to limit the addresses to
IPv6 addresses of eth0.
Fix problems when advertising deleted IPv6 prefixes. If
the prefix is deleted (rather than replaced), it doesn't
get advertised with zero preferred time. Thanks to Tsachi
for the bug report.
Fix segfault with some locally configured CNAMEs. Thanks
to Andrew Childs for spotting the problem.
Fix memory leak on re-reading /etc/hosts and friends,
introduced in 2.67.
Check the arrival interface of incoming DNS and TFTP
requests via IPv6, even in --bind-interfaces mode. This
isn't possible for IPv4 and can generate scary warnings,
but as it's always possible for IPv6 (the API always
exists) then we should do it always.
Tweak the rules on prefix-lengths in --dhcp-range for
IPv6. The new rule is that the specified prefix length
must be larger than or equal to the prefix length of the
corresponding address on the local interface.
particularly with NLS enabled when libidn was built without NLS.
While here, group OPTIONS and clean up things a bit, and print
configuration of port and libidn port for debugging.
The particular build failure was
Reported by: Yuri Vorobyev
Changelog: <http://www.thekelleys.org.uk/dnsmasq/CHANGELOG>
Enable NLS and IPV6 options by default.
Use shebangfix on files that need it.
Mark dnsmasq-devel (older than release) IGNORE.
Upstream changes:
Fix regression which broke forwarding of queries sent via
TCP which are not for A and AAAA and which were directed to
non-default servers. Thanks to Niax for the bug report.
Fix failure to build with DHCP support excluded. Thanks to
Gustavo Zacarias for the patch.
Fix nasty regression in 2.64 which completely broke cacheing.
Upstream changes:
TCP which are not for A and AAAA and which were directed to
non-default servers. Thanks to Niax for the bug report.
Fix failure to build with DHCP support excluded. Thanks to
Gustavo Zacarias for the patch.
Fix nasty regression in 2.64 which completely broke cacheing.
Feature safe: yes
Changelog for version 2.64:
Handle DHCP FQDN options with all flag bits zero and --dhcp-client-update set.
Thanks to Bernd Krumbroeck for spotting the problem.
Finesse the check for /etc/hosts names which conflict with DHCP names.
Previously a name/address pair in /etc/hosts which didn't match the
name/address of a DHCP lease would generate a warning. Now that only
happesn if there is not also a match. This allows multiple addresses for
a name in /etc/hosts with one of them assigned via DHCP.
Fix broken vendor-option processing for BOOTP. Thanks to Hans-Joachim
Baader for the bug report.
Don't report spurious netlink errors, regression in 2.63. Thanks to
Vladislav Grishenko for the patch.
Flag DHCP or DHCPv6 in starup logging. Thanks to Vladislav Grishenko for
the patch.
Add SetServersEx method in DBus interface. Thanks to Dan Williams for
the patch.
Add SetDomainServers method in DBus interface. Thanks to Roy Marples for
the patch.
Fix build with later Lua libraries. Thansk to Cristian Rodriguez for the
patch.
Add --max-cache-ttl option. Thanks to Dennis Kaarsemaker for the patch.
Fix breakage of --host-record parsing, resulting in infinte loop at
startup. Regression in 2.63. Thanks to Haim Gelfenbeyn for spotting
this.
Set SO_REUSEADDRESS and SO_V6ONLY options on the DHCPv6 socket, this
allows multiple instances of dnsmasq on a single machine, in the same
way as for DHCPv4. Thanks to Gene Czarcinski and Vladislav Grishenko for
work on this.
Fix DHCPv6 to do access control correctly when it's configured with
--listen-address. Thanks to Gene Czarcinski for sorting this out.
Add a "wildcard" dhcp-range which works for any IPv6 subnet,
--dhcp-range=::,static Useful for Stateless DHCPv6. Thanks to Vladislav
Grishenko for the patch.
Don't include lease-time in DHCPACK replies to DHCPINFORM queries, since
RFC-2131 says we shouldn't. Thanks to Wouter Ibens for pointing this
out.
Makefile tweak to do dependency checking on header files. Thanks to
Johan Peeters for the patch.
Check interface for outgoing unsolicited router advertisements, rather
than relying on interface address configuration. Thanks to Gene
Czarinski for the patch.
Handle better attempts to transmit on interfaces which are still doing
DAD, and specifically do not just transmit without setting source
address and interface, since this can cause very puzzling effects when a
router advertisement goes astray. Thanks again to Gene Czarinski.
Get RA timers right when there is more than one dhcp-range on a subnet.
This port is based on dns/dnsmasq 2.62_1,1 and has been updated to 2.63rc2.
Description (by Simon Kelley, the upstream maintainer):
Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP server.
It is designed to provide DNS and, optionally, DHCP, to a small network. It
can serve the names of local machines which are not in the global DNS. The
DHCP server integrates with the DNS server and allows machines with
DHCP-allocated addresses to appear in the DNS with names configured either
in each host or in a central configuration file. Dnsmasq supports static and
dynamic DHCP leases and BOOTP/TFTP/PXE for network booting of diskless
machines.
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility
This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG
it can take the following arguments:
- yes (meaning build only dep)
- build (meaning build only dep)
- run (meaning run only dep)
- both (meaning run and build dep)
From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.
While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config
With Hat: portmgr
Exp-runs by: bapt (pointhat-west), beat (pointyhat)
Re-write interface discovery code on *BSD to use getifaddrs. This
is more portable, more straightforward, and allows us to find the
prefix length for IPv6 addresses.
Add ra-names, ra-stateless and slaac keywords for DHCPv6. Dnsmasq
can now synthesise AAAA records for dual-stack hosts which get IPv6
addresses via SLAAC. It is also now possible to use SLAAC and
stateless DHCPv6, and to tell clients to use SLAAC addresses as
well as DHCP ones. Thanks to Dave Taht for help with this.
Add --dhcp-duid to allow DUID-EN uids to be used.
Explicity send DHCPv6 replies to the correct port, instead of relying
on clients to send requests with the correct source address, since
at least one client in the wild gets this wrong. Thanks to Conrda
Kostecki for help tracking this down.
Send a preference value of 255 in DHCPv6 replies when --dhcp-authoritative
is in effect. This tells clients not to wait around for other DHCP
servers.
Better logging of DHCPv6 options.
Add --host-record. Thanks to Rob Zwissler for the suggestion.
Invoke the DHCP script with action "tftp" when a TFTP file transfer
completes. The size of the file, address to which it was sent and
complete pathname are supplied. Note that version 2.60 introduced
some script incompatibilties associated with DHCPv6, and this is a
further change. To be safe, scripts should ignore unknown actions,
and if not IPv6-aware, should exit if the environment variable
DNSMASQ_IAID is set. The use-case for this is to track netboot/install.
Suggestion from Shantanu Gadgil.
Update contrib/port-forward/dnsmasq-portforward to reflect the
above.
Set the environment variable DNSMASQ_LOG_DHCP when running the
script id --log-dhcp is in effect, so that script can taylor their
logging verbosity. Suggestion from Malte Forkel.
Arrange that addresses specified with --listen-address work even
if there is no interface carrying the address. This is chiefly
useful for IPv4 loopback addresses, where any address in 127.0.0.0/8
is a valid loopback address, but normally only 127.0.0.1 appears
on the lo interface. Thanks to Mathieu Trudel-Lapierre for the idea
and initial patch.
Fix crash, introduced in 2.60, when a DHCPINFORM is received from
a network which has no valid dhcp-range. Thanks to Stephane Glondu
for the bug report.
Add a new DHCP lease time keyword, "deprecated" for --dhcp-range.
This is only valid for IPv6, and sets the preffered lease time for
both DHCP and RA to zero. The effect is that clients can continue
to use the address for existing connections, but new connections
will use other addresses, if they exist. This makes hitless renumbering
at least possible.
Fix bug in address6_available() which caused DHCPv6 lease aquisition
to fail if more than one dhcp-range in use.
Provide RDNSS and DNSSL data in router advertisements, using the
settings provided for DHCP options option6:domain-search and
option6:dns-server.
Tweak logo/favicon.ico to add some transparency. Thanks to SamLT
for work on this.
Don't cache data from non-recursive nameservers, since it may
erroneously look like a valid CNAME to a non-exitant name. Thanks
to Ben Winslow for finding this.
Call SO_BINDTODEVICE on the DHCP socket(s) when doing DHCP on exactly
one interface and --bind-interfaces is set. This makes the OpenStack
use-case of one dnsmasq per virtual interface work. This is only
available on Linux; it's not supported on other platforms. Thanks
to Vishvananda Ishaya and the OpenStack team for the suggestion.
Updated French translation. Thanks to Gildas Le Nadan.
Give correct from-cache answers to explict CNAME queries. Thanks
to Rob Zwissler for spotting this.
Add --tftp-lowercase option. Thanks to Oliver Rath for the patch.
Ensure that the DBus DhcpLeaseUpdated events are generated when a
lease goes through INIT_REBOOT state, even if the dhcp-script is
not in use. thanks to Antoaneta-Ecaterina Ene for the patch.
Fix failure of TFTP over IPv4 on OpenBSD platform. Thanks to Brad
Smith for spotting this.
maintainer, wrote in message <4F70361B.7080306@thekelleys.org.uk>:
A bug has been found in dnsmasq 2.60 that can cause crashes. This is
configuration dependent: it either crashes frequently or not at all.
The configuration required is one which allows dnsmasq to receive
DHCPINFORM requests for which there is no valid dhcp-range. This is
rare.
Adding the patch he offers for download.
Feature safe: yes
