The spamcontrol patch is applied through a script, install_spamcontrol.sh. This
script does not return a non-zero status when patch failures are encountered.
So I missed many failures when updating this port.
To fix this, move the spamcontrol patch application to pre-patch so that the
PATCHFILES->DISTFILES (and manual patch application with PATCH) is not needed
for most patches. This ensures that the spamcontrol patch is always applied
before PATCHFILES. Some PATCHFILES were applying before the spamcontrol patch
causing it to fail to patch properly.
Bump revision as the build had been fine but some files were not being
generated in the package.
Also add my mirror as distcache does not have the updated patches yet.
Reported by: Oleg Strizhak
MFH: 2014Q3
TLSREMOTE, NEWLINE, and BIGTODO are now mandatory upstream and have been
removed as options.
MOREIPME was removed upstream.
Changes:
http://www.fehcom.de/qmail/spamcontrol/RELEASE_27.spamcontrol
CHANGES (2.6 -> 2.7)
--------------------
Userland:
+) ucspi-ssl (> 0.8) mandatory.
+) Added CRAM-MD5 support for qmail-remote.
+) Added qmail-smtpam PAM for Recipients extension.
+) Added sender-domain based TLS settings for qmail-remote.
:) Changed qmail-remote's 'tlspeerhosts' to' tlsdestinations'.
-) Removed moreip and notipme feature.
:) REQUIREAUTH has been collapsed into SMTPAUTH with leading "!",
:) SMTPAUTH has been enhanced to support: "!" Required; "-" Off.
:) SMTPAUTH cram-md5 annoucement has to be prefixed with a '+':
SMTPAUTH='+cram' (to allow future additional AUTH mechanisms).
:) UCSPITLS has been enhanced to support: "!" Required "-" Off.
+) Added logging for qmail-popup.
+) Added CAPA support for qmail-popup/qmail-pop3d.
:) Unified qmail-smtpd and qmail-popup logging.
+) SPF and RBLSMTPD hook to display info in Received header.
+) LOCALMFCHECK='=' requiring 'Mail From:' = 'TCPREMOTEINFO'.
Internal:
!) Bigtodo is default now.
!) Maximum silent concurrency increased to 500.
#) Aligend with recipients-0.7.2.
#) Aligned with smtp-authentication 0.7.6.
%) qmail-smtpd logging and reply messages 'off-shored'.
?) qmail-smtpd tls vulnerability VU#555316 fixed.
?) qmail-smtpd DNS lookup failures don't result in dropped
connections anymore.
%) qmail-remote evalutes in addition Alternative Subject for TLS host verification.
%) Complete FreeBSD AMD64 support (conf-cc, conf-ld, conf-spamcontrol).
#) Aligned with mav 0.20.
+) Added partial clang support.
ADDITIONAL CHANGES
------------------
+) Added SMTP Authentication based on smtproutes/destination.
#) Aligned with SMTP Authentication 0.8.0.
-) Removed obsolete SUBMISSION environment variable and special treatement.
:) Enhanced badmailfrom with new qualifier '~' for extended addresses
to filter mismatched domain names.
+) Added *.3 man pages in setup (dirs were missing before).
;) SPF Hook working now.
- Support stagedir
- Fix all leftovers
Note that this depends on new Mk/Scripts/check_leftovers.sh added in r351446.
- Bump PORTREVISION in all ports due to plist being fixed.
- Support man.d on FreeBSD 9+
- Convert NOPORTDOCS
- Fix bad perl shebang for scripts/mkaliasdir
- Remove pkg-install and move all to pkg-plist
- Fix /var/qmail modified warning in poudriere by doing nothing in
install-mtree
- Fix /var/qmail getting unpredictable/wrong permissions due to
USERS/GROUPS changing for every user with HOME=/var/qmail
- Use more OPTIONS helpers
- Fix ccache support for spamcontrol patch building
- Fix build of SMTPEXTFORK in mail/qmail-spamcontrol with recent clang
Tested with: pkg and pkg_install
- Support SHUTDOWN
- Check for needed files/dependencies in precmd
- Respect LOCALBASE
- Make rclint happy
- Rename symlink from qmail.sh to qmailsmtpd
- Rename installed example rc file from qmail-smtpd.rcNG to qmailsmtpd
calling strtok(3) without string.h included.
Not reported "upstream" as the last update was 2009
and the site is dead.
Reported by: Christopher Weimann <christopher@weimann.us>
- Add an rcNG startup example file to QMAIL_PREFIX/boot [2]
- Bump PORTREVISION due to rcNG add (except for qmail-ldap)
- Fix make certificate to add ciphers file to QMAIL_PREFIX/control [3]
PR: ports/118117 [1], ports/117422 [2], ports/118198 [3]
Submitted by: Andrew Reilly <areilly@bigpond.net.au> [1] [3]
Nick@van-laarhoven.org [2]
very long and if some dependencies can't be added into the list.
[1]
- Fix FAM support. Make gamin the default FAM system. [2]
- Introduce new 'quicksearch' target to show only port, path and
info section of the matching ports. [3]
- Introduce new category - rubygems. [4]
- Fix stale dependencies while installing qmail slaveport and
another port that depends on qmail. [5]
- Add commentary for describes target in bsd.port.mk. [6]
- Fix warning issued during make index on archs !368. [7]
- Add USE_DOS2UNIX variable. If set to "YES", remove the ^M from
all files under ${WRKSRC}. If set to a string, remove in all files
under ${WRKSRC} with one of these names the ^Ms. [8]
- Add new variables PERL_RUN_DEPENDS and PERL_BUILD_DEPENDS by
checking the existance of the Perl modules with the "perl -e 'use
module;'" command. [9]
- Fix bsd.port.mk variable quoting issues. No quoting is necessary
anymore either in the Makefile or on the command line. Affected
variables include:
BROKEN
FORBIDDEN
IGNORE
MANUAL_PACKAGE_BUILD
NO_CDROM
NO_PACKAGE
RESTRICTED
[10]
- Add NOFETCHFILES variable. If set, don't download these files
from the ${MASTER_SITES} or ${MASTER_SITE_BACKUP} (but do from
${MASTER_SITE_OVERRIDE}). [11]
- Improve 'search' target output. [12]
- Add a new virtual category for Amateur Radio - hamradio. [13]
- Cleanup some old/unused pathes in bsd.port.mk. [14]
- Add @dirrmtry for plists which does the same as:
"@unexec rmdir %D/foo 2>/dev/null || true" [15]
- Remove virtual category - offix. [16]
- Use portsnap instead of cvsup or cvs on "make update" in
/usr/ports. [17]
- Move location of bsd.autotools.mk within bsd.port.mk [18]
- Add bsd.linux-rpm.mk, fix INSTALLS_SHLIB for Linux ports [19]
- Use new USE_RC_SUBR format for FreeBSD version >= 700007 [20]
- Replace the string "FreeBSD" by "The FreeBSD Project" in the
security warning [21]
- Add bsd.local.mk for local modification to ports framework. [22]
- Replace rcNG spelling by rc.d [23]
- Remove superfluous USE_REINPLACE. [24]
Special thanks to: linimon for spending hours with all these patches
clement for fixes
kris for help with pointyhat
PR: ports/86310 [1], ports/89498 [2], ports/83530 [3],
ports/83789 [4], ports/84053 [5], ports/86281 [6],
ports/87214 [7], ports/87234 [8], ports/87318 [9],
ports/87396 [10], ports/87605 [11], ports/87840 [12],
ports/88230 [13], ports/88493 [14], ports/88711 [15],
ports/88751 [16], ports/89281 [17], ports/89999 [18],
ports/90031 [19], ports/90150 [20], ports/90668 [21],
ports/91433 [23], ports/88754 [24]
Submitted by: mi [1], marcus [2], Lars Engels <lars.engels@0x20.net> [3],
pav [4, 16, 20, 24], garga [5], cperciva [6], vd [7],
edwin [8, 9, 11, 15, 21],
fenner [10], Arseny Nasokin <tarc.po.cs.msu.su@tarc.po.cs.msu.su> [12],
Carl Makin <carl@stagecraft.cx> [13], arved [14],
NIIMI Satoshi <sa2c@sa2c.net> [17], thierry [18],
jylefort [19], linimon [22], dougb [23]
- Use only one pkg-plist and use PLIST_SUB
- Use DOCSDIR intead of DOCDIR
- OPTIONS'ify
- Remove WITH_PRESERVE_CONFIG_FILES knob and detect automatically when is need
to create it.
- Add $FreeBSD$ tag to pkg-plist and pkg-install
- Fix error on enable-qmail script
- Remove MASTER_SITE_QMAIL definition from Makefile since it's defined on
bsd.sites.mk
- Add a new option to don't create rc.d/qmail.sh
- Add rc.d/qmail.sh to pkg-plist when necessary
PR: ports/80833
Submitted by: maintainer
Thanks to: novel, Joao Ricardo P. Mendes <joao@redepegasus.com.br>
o Change ${PERL} to ${SED} or ${REINPLACE_CMD}
o Added patch patch-qmail-1.03-rfc2821.diff to search other MX servers
when the first return a code > 500 and < 599
o Install mkaliasdir script on ${PREFIX}/scripts directory
o Remove targets to disable-qmail and enable-sendmail and put it on a
shell script that is installed on /var/qmail/scripts. Change messages
reflect this.
o Organize better pkg-plist
o Remove thereal-post-patch target and put all on post-post-patch target
o Add [0-9] to CONFLICTS on qmail-ldap port
o Change LIB_DEPENDS to USE_MYSQL=yes on qmail-mysql port
o Change qmail-spamcontrol to don't need more to apply patches mannualy
PR: ports/79094
Submitted by: maintainer
