* Depend on libelf on DragonFly
* Rework the vdpau support code and enable vdpau for DragonFly, FreeBSD
doesn't support it just yet.
* Revert commit that removed support for non-render nodes. Neither
FreeBSD nor DragonFly supports render nodes at this time.
* Fix LDFLAGS to work with GCC5, which DragonFly uses by default.
* Update Makefile.targets: ffast-math isn't used since 8.0.3, don't
replace x86_64 with amd64 on Dragonfly. Drop obsolete python disable
replace.
arch, like is done for the dri drivers. This fixes Mesa build on arm. [1]
* Explicitly disable libva support. This resolves a build issue if libva
is installed. [2]
* remove the gallium-intel configure flag, it is gone.
PR: 197548 [2]
Reported by: sbruno@ [1]
Reported by: rozhuk.im@gmail.com [2]
Tested by: sbruno@ on arm [1]
* Unbreak build on powerpc and other !x86 archs by moving the
--with-dri-drivers logic from dri/Makefile to the
libGL/Makefile.common file. So the settings are applied to all mesa ports,
this was missed in the 10.6.6 update. [1]
* Don't try to enable OpenCL support on anything other then i386 and amd64. [1]
* Move the texture-float and vdpau logic to Makefile.common even if the latter
isn't supported yet. Keep OPTIONS_DEFINE/DEFAULT in dri/Makefile since they
need to defined before bsd.port.options.mk is included, and they only affect
the dri modules.
* Sed on 11 and 10 supports \< and \> however sed on 9.x and dragonfly do not,
replace the sed keywords with some magic to get the intended results. [2]
Submitted by: marino@ [2]
Reported and tested by: arved@ (on ppc32)[1]
Add beignet 1.1.0.
Add clinfo, clblas, clfft and clrng.
The major change is that all Mesa ports are now configured the same way.
This fixes several problems and enables new features. The details
are described in this blog post:
http://blogs.freebsdish.org/graphics/2015/03/18/unifying-mesa-ports-configure/
The second important change is the OpenCL support. Mesa's
implementation, Clover, is enabled as well as Beignet. Clover
targets all Gallium drivers, only Radeon GPUs in our case. Beignet
is for Intel GPUs starting with Ivy Bridge. Thanks to Johannes
Dieterich, O. Hartman, and Koop Mast for their work on OpenCL! As a
bonus, there are several OpenCL-based math ports added (clblas,
clfft and clrng). For more information and known issues, please see
https://wiki.freebsd.org/Graphics/OpenCL
The third change is the removal of Mesa 9.1.7 which was installed on
FreeBSD 9.3-RELEASE. There is now only one version of Mesa in the Ports
tree (10.6.6) for all supported versions of FreeBSD.
Other, smaller changes:
* Include libosmesa into the Mesa framework; this changes libOSMesa
shlib version.
* bsd.mesalib.mk was renamed and split up in two files namely
Makefile.common and Makefile.targets. So ports can overwrite variables
set by Makefile.common and are used by Makefile.targets.
* Some text in the pkg-descr files was wrong, clean it up. While here,
update the WWW to the main mesa3d.org upstream page.
* devel/clinfo was added, a glxinfo like program but for OpenCL.
Non-x86 hardware reports are very welcome since we changed the framework
quite a bit.
Obtained from: Graphics team development repo.
Move LLVM version selection to bsd.mesalib.mk so the clover port can use it.
Clover isn't included yet because it is a work in progress and doesn't work
yet.
Enable TEXTURE option in dri by default [1]. This allows for OpenGL higher
then 2.1 to be supported.
Make sure we depend on llvm at run time when gallium is enabled.
The gallium based modules link to the llvm shared libraries. [2]
PR: followup on 194655 [2]
Approved by: core@ [1]
Obtained from: xorg-dev repo
graphics/dri:
Move gettext:build to bsd.mesalib.mk so it present for all mesa ports. [1]
VDPAU needs GALLIUM so check for that, since it a Gallium state tracker. [1][2]
Rework llvm33/llvm34 selection so we can use the llvm version later on.
VDPAU links against the llvm libraries so we need to depend on the llvm port
as a run dependency .[1]
After discussion remove the VDPAU option for now. Radeon kernel drivers currently
don't support hardware-assisted video decoding. And Gallium/VDPAU doesn't support
the intel driver.
PR: 194655 [1]
PR: 194580 [2]
The port will switch to the newer version if hw context is available in the
i915kms driver.
- Get ride of WITH_NEW_XORG.
- Use @comment in plist to ignore unwanted files in the stagedir, instead of
trying to remove them in post-install.
- Bump portrevision of 9.1.7 due to dependency changes.
- Drop :keepla from USES=libtool.
- Drop @dirrm[try] from plists
- Give dri propper options, with pkg-help for additional information.
- Make separate plist for dri for the different versions, the combined plist
was headache inducing.
- Add "workaround" patches to allow clang to build the dri port on i386 [1].
USE_GCC is now only needed for 8.x.
- Add gbm port and USE_GL switch for it.
PR: 192286 [1]
Submitted by: Carlos Jacobo Puga Medina [1]
Approved by: portmgr (bapt@)
In collaberation with: dumbbell@
Obtained from: xorg-dev
base is not good enough.
For i386 depend on gcc form ports. This is due to a clang assertion [1],
which has been reported in the clang bugtracker.
Reported by: many [1]
and libglesv2. This fixes undefined symbol issues in libglesv2.
Clean up stagedir of unwanted files/directories, so check-plist passes.
Switch logic and always build gallium support in graphics/dri on i386 and
amd64. Gallium is used for Radeon HD 5000+ support.
Use USES=tar:bzip2
Under WITH_NEW_XORG:
Add patch to remove some dependencies for aclocal.m4 which are absent.
This allows the removal of USE_AUTOTOOLS, REAPPLY_PATCHES and pre-configure
target.
Add INSTALL_TARGET=install-strip to strip libraries.
USES=libtool:keepla
Fix a /use typo with /usr in post-patch.
Bump PORTREVISION for the libtool and libglapi changes.
Submitted by: tijl@ (libtool and autotools changes)
Obtained from: xorg-dev repo (libglapi and gallium changes)
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
Stagify, abuse stage dir and plist to only install files we want to install.
So we don't have to do complex do-install anymore, yay.
For the WITH_GALLIUM option we don't need llvm at run-time.
Obtained from: xorg-dev repo
a kwm, zeising production:
MESA 9.1.6
Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first. See UPDATING for details.
PR: ports/181962 [2]
Submitted by: marius [1]
zeising [2]
Exp-run by: bdrewery
Approved by: portmgr (bdrewery)
Thanks to all who helped testing!
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
- Make it possible to choose which DRI drivers will be built [2]
PR: ports/174725 [1]
PR: ports/154651 [2]
Submitted by: John Marino <draco@marino.st> [1]
Submitted by: bf [2]
Reviewed by: kwm [2]
The Xorg Team is pleased to announce the next round of Xorg updates.
The team created a new flag called WITH_NEW_XORG that users can include
in /etc/make.conf. This was created for the intel KMS work being done
althouthough It probably works for other chips. Unfortunately, the intel
KMS driver will only work on FreeBSD 9(RELENG|STABLE) or 10/HEAD users.
Older version of FreeBSD will not be supported. Intel users will need
to patch their source manually with Konstantin?s KMS kernel patch to get
the newer chips to work. Please carefully read UPDATING entry.
Changes:
- libdrm 2.4.31 (including KMS support)
- mesa 7.11.2
- xorg-server 1.10.6
- a lot of new Graphic Drivers.
I would like to thank:
Koop Mast
Eitan Adler
Niclas Zeising
and all helpers and testers from x11@.
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.
I would like to thank:
Beat Gaetzi
Dima Panov
Koop Mast
Eitan Adler
and all Testers.
PR: ports/147646
ports/148035
ports/148744
ports/150223
ports/152889
ports/154457
[MEMO]
In this commit, no version changed. But if you put
'WITHOUT_NOUVEAU' on /etc/make.conf, you can use
new version of Mesa3D and libdrm.
Discussed with: rnoland on freebsd-ports/freebsd-x11.
