UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.
Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.
Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)
Reviewed by: antoine, bapt
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3336
64 bit linuxulator support (not activated by default):
- most of the work was done by Alan Jude
- all errors are mine
- 64bit (may) have rough edges
- I validated
* that the 32bit part doesn't has deinstall regressions (incl. EXP runs by
antoine)
* 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
later, when I dare to activate the 64bit linuxulator in the kernel)
- the infrastructure part looks mature enough to let more test-bunnies get
some experience with the new 64 bit parts
- to use it you shall have no linux ports installed and have to specify
(on your own risk) the following in make.conf before installing the ports:
OVERRIDE_LINUX_BASE_PORT=c6_64
OVERRIDE_LINUX_NONBASE_PORTS=c6_64
This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).
Differential Revision: https://reviews.freebsd.org/D174
Submitted by: alanjude
Sponsored by: Essen FreeBSD Hackathon 2015
Reviewed by: xmj, eadler (earlier versions)
Approved by: portmgr (antoine after some EXP-runs)
- most of the work was done by Alan Jude
- all errors are mine
- 64bit (may) have rough edges
- I validated
* that the 32bit part doesn't has deinstall regressions
* 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
later, when I dare to activate the 64bit linuxulator in the kernel)
- the infrastructure part looks mature enough to let more test-bunnies get
some experience with it
- to use it you shall have no linux ports installed and have to specify
(on your own risk) the following in make.conf before installing the ports:
OVERRIDE_LINUX_BASE_PORT=c6_64
OVERRIDE_LINUX_NONBASE_PORTS=c6_64
This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).
Differential Revision: https://reviews.freebsd.org/D174
Submitted by: alanjude
Sponsored by: Essen FreeBSD Hackathon 2015
Reviewed by: xmj, eadler (earlier versions)
Approved by: portmgr (implicit, I remember blanked approval for
linux parts loooong ago, punish me if you don't
agree anymore)
- Like r315899 did for linux_base-f10, add some symlinks to linux_base-c6
for executables that exist in /usr/bin on Linux but /bin on FreeBSD.
This guarantees that Linux shell scripts run the Linux executables and
not the FreeBSD ones.
PR: 197406
Since CentOS 6.5 landed in the portstree and was updated to CentOS 6.6 and we've
fixed the remaining issues, it's time to replace Fedora 10 as Linux default --
given that in the past five years it has done its service and has long since
gone EOL upstream.
The CentOS 6 series will go End of Life in 2020, this should give us some time
to keep its annual releases up to date.
If you have not switched to using CentOS 6.6 ports, please refer to today's
UPDATING entry -- it contains detailed instructions.
If you have already switched to CentOS 6.6 userland,
you can now remove the following two lines from make.conf:
OVERRIDE_LINUX_BASE_PORT=c6
OVERRIDE_LINUX_NONBASE_PORTS=c6
If you encounter any difficulties, please follow the UPDATING entry from
20140922 but skip step 2. In case these steps do not fix the issues,
please submit an issue report in Bugzilla and send an email to FreeBSD's
emulation mailing list.
Differential Revision: https://reviews.freebsd.org/D1145
Reviewed by: wblock, bcr (doc), rene (emulation)
Approved by: swills (mentor)
Approved by: portmgr (swills)
Sponsored by: Perceivon Hosting Inc.
Using pkg with linux packages will generate conflicts with non-linux ports if
PREFIX is set in make.conf. If USE_LINUX_PREFIX is defined, force PREFIX to
LINUXBASE, which can be overridden separately.
Differential Revision: https://reviews.freebsd.org/D1265
Approved by: koobs, swills (mentors)
- expr(1) and factor(1) currently shipped with linux emulation fail, due to
missing gmp libraries. Add these to allow the correct behavior
- Bump PORTREVISIONs
PR: 195084
Differential Revision: https://reviews.freebsd.org/D1252
Submitted by: Jan Beich <jbeich@vfemail.net>
Approved by: swills (mentor)
- replace two i686 distfiles in SRC_DISTFILES with their src.rpm counterpart
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Approved by: swills (mentor)
Bash 4.1.2 as shipped with this Linux base port is vulnerable to
CVE-2014-6271 and CVE-2014-7169. As EL6 policy is to backport security
patches, use a RPM that is not vulnerable to either remote code execution
vulnerability.
While here:
- Add the proper UDPATES Master site
- remove sample files installation from Makefile, in favor of @sample
Approved by: swills (mentor)
Security: 71ad81da-4414-11e4-a33e-3c970e169bc2
The Fedora 10 infrastructure ports have been in use since June 2009 and, while
having served a great deed, have become unsupported upstream and hence affected
by unfixed security vulnerabilities. In addition to that, many recent Linux
binaries need newer libc / stdlibc++ versions.
This commit adds the linux-c6- userland as drop-in replacement for the -f10
infrastructure, as well as upgrading the linux_base-c6 port to CentOS 6.5.
If you want to switch to linux-c6 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=c6
OVERRIDE_LINUX_NONBASE_PORTS=c6
Additionally, please add the following line to /etc/sysctl.conf:
compat.linux.osrelease=2.6.18
Upgrading procedures are shown in /usr/ports/UPDATING.
This work has been inspired by Artyom Mirgorodskiy's post to emulation@ in
November 2013, using and extending mav@'s work. It has been tested extensively
and most reported issues were already fixed. Please report any additional bug
or "features" to the emulation mailing list.
Many thanks to: mav@, rene@, allanjude@, netchild@, antoine@, everyone who's
filed Issues and Pull requests on GitHub,
PR: 186820
Differential Revision: https://reviews.freebsd.org/D793
Reviewed by: allanjude, antoine, bapt, rene
Approved by: portmgr (antoine, bapt)
Approved by: koobs (mentor)
Sponsored by: Perceivon Hosting Inc.
- f10 had it
- this fixes at least the flashplugin with this linux_base
Fix comment.
PR: 186118
Submitted by: Nikolai Lifanov <lifanov@mail.lifanov.com>
- Properly handle yp.conf and krb5.conf
- Remove some assignments with default values
Note that staging warns about etc/*shadow not being readable, because their
permissions are 0.
bsd.linux-rpm.mk. The default linux version is now Fedora 10.
- Remove now obsolete checks for Linux 2.4 in emulators/linux_base-c6,
emulators/linux_base-f10, and emulators/linux_dist-gentoo-stage3.
While there, remove superfluous -p argument from ${MKDIR}.
- Remove now obsolete check for Linux 2.4 or FreeBSD 6 and lower from
astro/google-earth.
- Remove expired Fedora Core 4 ports which were only used on FreeBSD 7
and below.
- Update LEGAL and MOVED
PR: ports/176877
Submitted by: myself
Approved by: portmgr (bapt)
Exp-run by: bapt
Add linux_base-c6 port. This is a linux_base port based upon CentOS 6.
CentOS 6 is supported upstream (so far) until November 30, 2020.
Compared to the port as submitted in the PR, I added most SRC_DISTFILES
and set the maintainer to emulation@ (discussed with the submitter).
Not connected to the ports collection (emulation/Makefile) yet, first I want
to find the missing src RPMs (compat-*, stdc++, ...). The port is committed
anyway, so that people can help with the TODO list (in the Makefile).
WARNING: it is highly experimental to use this port instead of the default
linux_base port. You need to set compat.linux.osrelease to 2.6.18, so watch
out for unimplemented syscalls (most recent 8-stable / 9-stable or -current
is recommended for this).
Submitted by: Svyatoslav Lempert <svyatoslav.lempert@gmail.com>
PR: 165900
of LINUX_OSRELEASE. pointyhat-west itself might have a different version
of linux compat than whatever we are testing on the client nodes.
The more general solution is in ports/135221, which needs a careful -exp
run to test.
Hat: portmgr
be generated or checked, and will be silently ignored for now. Also,
generalize the MD5_FILE macro to DISTINFO_FILO.
PR: 149657
Submitted by: rene
Approved by: portmgr
Tested on: pointyhat i386 7-exp
Those ports are intended to be used with 8-CURRENT at least
with SVN r192206.
If you want to switch to linux-f10 ports, please define at /etc/make.conf:
OVERRIDE_LINUX_BASE_PORT=f10
OVERRIDE_LINUX_NONBASE_PORTS=f10
An upgrading procedure is shown at /usr/ports/UPDATING, entries 20090401
and 20070327.
For the first time all tested linux ports work as expected(!):
. acroread8;
. google-earth;
. skype;
. seamonkey.
Many thanks for kernel folks who really did the main work
(and I wrote only some lines of ports).
There is a good chance that those ports may become a default
for 8.0-RELEASE. Please, test and report back to emulation@ ML.
. chase some new package versions;
. add a package with a missing library presented at previous linux_base [1]
ports (libcom_err);
. bump PORTREVISION.
Reported at: emulation@ [1]
