Fix PLIST variable substitution by adding missing spaces in front of
@comment.
Fix pkg-plist for some files that were incorrectly labeled as original or
Diamond only.
Approved by: wxs
Remove ARCH requirement for i386; let the install of the Linux base
determine if the port is allowed or not.
Detect if the original or Diamond game files were installed in
games/nwndata to install the appropriate client.
Add an option to install the NWMovies/BinkPlayer patch to play in-game
movies for the Diamond client. This includes a rewritten script (from
Perl to shell) to remove the need for Linux Perl to run it. The script
includes a method to skip movies, especially the intro movies, as noted in
pkg-message. Default to off.
In the nwn script, remove dead links in and rebuild ${HOME}/.nwn. This
allows moving between the original and Diamond editions without confusing
(resulting in segmentation faults) the client.
Set SDL_AUDIODRIVER to dsp by default to remove warnings from SDL
concerning audio setup.
Disallow core files as these are commonly seen when the game exits.
Fortunately, the segmentation fault does not affect play nor the
configuration files.
Approved by: wxs
using USE_LINUX_APPS+=dri. This is needed to switch a default
linux base at 8-CURRENT to linux_base-f10. No PORTREVISION bump
is needed since it's mere infrastructure fix. Affected ports:
-----
emulators/linux-pete-mesagpu/Makefile
emulators/linux-pete-xgl2gpu/Makefile
games/atitd/Makefile
games/linux-coldwar-demo/Makefile
games/linux-darwinia-demo/Makefile
games/linux-defcon/Makefile
games/linux-doom3-demo/Makefile
games/linux-gorky17-demo/Makefile
games/linux-nerogame/Makefile
games/linux-nwnclient/Makefile
games/linux-savage/Makefile
games/linux-savage-samuraiwars/Makefile
games/linux-uplink-demo/Makefile
games/linux-ut2003-demo/Makefile
games/linux-ut2004-demo/Makefile
games/linux-virtual-jay-peak/Makefile
games/linux-warsow/Makefile
graphics/linux-ac3d/Makefile
math/mupad/Makefile
net/skype12/Makefile
-----
Approved by: maintainer timeout (2 months, the needed changes were submitted to emulation@ at 2009-04-09)
both current (fc4) and future linux (f8) distributions at one
ports tree.
The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.
The idea was taken from bsd.gnome.mk and others.
More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.
Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.
Other changes are coming. Stay tuned!
PR: ports/132510
Submitted by: bsam (me)
Exp-run by: portmgr (pav)
The linux-nwnclient port checks to see if WITH_NVIDIA_GL is defined to
determine whether or not it should depend on the nvidia-driver
instead of linux_dri. However, both dependencies are needed
as linux_dri provides 'libGLU.so.1', which does not come
with the nvidia-driver. This is needed in order to run
linux-nwnclient.
I use the nvidia-driver port and had to install linux_dri
by hand after installing nwn. It seems to be working fine
in conjunction with the driver.
My suggestion is to either drop the nvidia-driver dependency
entirely, or at least depend on linux_dri whether WITH_NVIDIA_GL
is defined or not.
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.decracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.orgriggs@rrr.deUdo.Schweigert@Siemens.com
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
Add a wrapper script that creates a client directory with symlinks to
the data files so users don't need any privileges to play the game.
Use the linux-sdl port instead of the SDL library that comes with the
client.
This is the Neverwinter Nights Linux based client. It runs
under FreeBSD using the Linux emulation mode.
WWW: http://nwn.bioware.com/
PR: ports/53914
Submitted by: Erik Olson <erikolson@olsonexpress.com>
