* Allow https URLs for the WWW line in pkg-descr. Why are we only NOW doing
this? [1]
* Check TIMESTAMP to make sure it's in the present/past, but not more than 30
days in the past. [2]
PR: 212091 [2]
Submitted by: amdmi3 [1]
Differential Revision: D8462 [1]
Skip new "base" category during ports scanning
The new base category was never meant to be part of the build so the
category makefile was intentionally left off so poudriere and friends
would skip it.
Unfortunately, this idea didn't account for Synth which has a different
behavior: If no category makefile exists, *ALL* subdirectories are
scanned instead of none of them. (DPorts doesn't use category Makefiles
because by definition all ports are valid; there are no "unhooked" ones)
The proper solution would be to include a practically blank
ports/head/base/Makefile to maintain consistency with the rest of
the ports categories, but synth now actively excludes the base category.
Change name of 05 log
The command output log name has changed from "05_abnormal_cmd.out" to
"05_abnormal_command_output.log". The former tended to be considered
a binary file by webservers and would download rather than display.
Final tally added to end of main 00_last_results.log file
At the end of a bulk run, the final tally (queue size, built, failed,
skipped, ignored) would be displayed in curses mode. This change adds
the same useful information to the end the main bulk run log.
- Fix file descriptor leak during rc script execution
- Fix setting attributes on directories
- Fix locking on NFS
- Allow pkg annodate -S to run as a non priviledge user
- Extend the audit periodic script to report about expiration/deprecation
Change in hook behavior:
Now the initial building of pkg(8) triggers a success or failure hook
after building. Before ports-mgmt/pkg was the only port that could
never trigger these hooks. The "bulk run start" hook is triggered
afterwords as pkg(8) is a prerequisite to preparing the bulk run.
Fix potential bad unmount of /usr/src
In the case where /usr/src exists, but the profiles uses a system root
that is not "/" and doesn't have an "usr/src" subdirectory, an error
would be emitted as the unmount of the non-existant mount failed. This
uncommon use case has been fixed.
Curses display builder "Elapsed" label changed to "Duration"
This matches the format of the web-based report
DragonFly only: Support File(1) v2.0 version parsing
The output of file(1) version on DragonFly will change with version 2.0.
For example, what is now version 4.0.702 will be displayed as 4.7.2 on
newer versions of file(1). Moreover, the parsing for DragonFly 4.10+
would not have worked. Now both versions are supports and the double-
digit minor versions are properly handled as well.
At the request of a user, further review reveal that the pkg_* tools
aren't actually used. It just awks the INDEX file. The maintainer
forgot the technical details, especially since the SEE ALSO section of
the man page references pkg_* tools.
A minor update is needed to re-support DragonFly and update the man
page. Until this, it's been marked IGNORE for DragonFly.
- Fix fd leak on systems without utimensat (merged in release branch)
- Do not use openssl for sha256
- Improve the default output when fetching data
- Update libfetch to the version of FreeBSD 11
- Update libsbuf to the version of FreeBSD 11
- Fix NetBSD ABI
- Add a fallback for utimensat when reporting EOPNOTSUPP
Fix web report regression caused by cleaning of history files.
The history files were being removed too late. Any ignored/skipped
files erased after writing (but would return with first built/failed
port). If more than 500 ports were ignored+skipped, the web report
would fail to show the history completely and would not recover. The
old history files are now removed before the ignore/skip cascades.
Cosmetic: curses display
Capitalize "Swap" and "Skipped" field labels
Cosmetic: web report
After the build completes, fade out the builders table in 2.5 seconds.
Nobody needs to see a table showing all the builders in "shutdown" mode.
Bandwidth: json files
A history.json file holds up to 500 log entries. 16 bytes of spaces were
removed which reduces the history file size by 8000 bytes. Spaces were
also removed from summary.json which can account for 20%+ of the size.
Only rewrite history files upon change:
The last history.json file was being written/rewritten every 3 seconds
regardless if there were changes to it or not. Now it's only written
if it's changed since the previous write. This might help reduce errors
seen by in nginx access log which are thought to occur when file changes
as the file is being served.
Address "[N] Fetch prebuilt packages" bug:
Once the /usr/local/etc/pkg/repos/00_synth.conf file was created, there
was a good change that fetching prebuilt packages would stop with a
fetch error that the checksum didn't match. This seems to be caused by
pkg(8) using both the FreeBSD and the Synth repositories and often
deferring to the latter. This is incorrect behavior as only the FreeBSD
repository should be used for prefetching. This issue is hopefully
resolved now.
Web report behavior change:
Any existing ??_history.json files are now deleted at the start of
each run. They were only litter as the javascript did not pull in old
files, so this change just removes them.
While here, rename the "Elapsed" column on the builders table to
"Duration" to match the history table lable and also adjust the widths
of the origin and information columns on the history table.
- Drop privileges in many commands
- Drop privileges when fetching a file
- Add resource limitation in sandboxes
- Add support for METALOG
- pkg delete new prints a warning for pattens that matches nothing?
Major new feature: Web-based front-end
A dynamic html report is now generated for each build. The report is
placed at <profile log directory>/Report/index.html.
The report is updated 10 times per minute. The entire build history
is retained and is searchable, but that history is reset at the start
of the next run.
In addition, several fields are clickable and trigger a quick-filter
on the history log including the "Built", "Failed", "Ignored",
"Skipped", "No." column and "ID" column (see tiptool for action hint)
and the "Total" field clears the search pattern quickly.
An earlier but representative version of the web report can be seen at:
https://github.com/jrmarino/synth#web-interface
The Synth web report pulls 2 orders of magnitude less data than the
equivalent poudriere report because the json data is split into
multiple files limited to 500 ports each (e.g. the poudriere data file
might be 1.8 Mb on a big bulk run polled every 8 seconds where as
Synth only pulls the latest segment file (50kb avg) every 6 seconds.
Synth also stops polling when the run is complete.
Minor enhancement: The log files were cleaned up
The data/phase headers and footers were modified so that the build
log appears a lot cleaner now (subjective of course).
from ${OSVERSION}. This should work around a bug in portsnap whereby the
"Fetching N metadata files" step will fail if the identical INDEX files
are generated for different major FreeBSD versions.
It turns out that the C source files were getting built with the headers
from the base ncurses. The recent update in Synth's display exposed a
resulting problem with the add chtype routines, resulting in garbled
output. Since adacurses is a static library, synth requires a revbump.
Handles remaining resizing exceptions and improves display handling.
Yesterday's work handled most of the common display exceptions, but others
were still possible. Now all possible exceptions are handled.
Several improvements were made to the display:
1) lines no longer wrap if the size width is resized too narrow; they
get truncated as always intended
2) Elements such as the elapse timer don't get displayed in the wrong
place when the screen is too narrow (they just don't show)
3) The dashes now get restored if the screen is sized small and then
big again (or started small and then expanded). In many cases those
lines just never came back before.
4) The "full" refresh frequency was increased a period of 30 seconds to
a period of 4 seconds. This has a side benefit to text-mode watchdog
as well since that's the same timer for the log inspection.
5) The history window height ranges from 10 to 50 rows. If the xterm
window starts small, the history will be 10 lines. If it starts
big, the number of lines will be dictated by the original size of
the xterm window. Making the screen small and then bigger again will
reveal the full number of log lines.
Major bug fix: ncurses display resize hang fixed
Until now, resizing the window why synth is running in ncurses mode
caused synth to hang (it would finish the builds it was working on
but the display wouldn't update and no new jobs would start). This
was due to an unhandled exception thown by ncurses binding as a result
of the resize event, and now these are handled.
Minor fix: Ports with @info in pkg-plist now pass in test mode
The mtree exclusion file was improved to allow these leftover info
directories to be ignored (as is done in poudriere. Before only
info/dir was ignored, but the presence of "dir" prevented "info" from
being removed by pkg(8) upon deinstallation.
enhancement: Augment text mode (requested)
Now when a builder starts on a new package, the port origin will be
shown in the running log (before only the completion was logged.)
Fix regression in text-mode caused by activation of watchdog.
The watchdog is checking the lengths of the build logs to figure out if
a builder has stalled. It turns out that the logs were only being
inspected in ncurses display mode, so any port that took longer than
20 minutes to build would be aborted by the watchdog.
While here, bump the *BASE* time limit for the build phase from 20 to
25 minutes based on extreme causes (normally involving gcc or tex ports)
and also bump the check-plist phase limit from 3 minutes to 10 minutes.
Some ports have tens of thousands of files in them which takes a long
time to check under test mode, especially if the server is loaded.
- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN
Some ports have a local mirror configured but for security reasons, it
is not considered upstream.
Sponsored by: Absolight
This release changes the watchdog time limits from a fixed value to
one that is affected by the average load. Using fixed values didn't
work well on extremely (and intentionally) loaded servers, e.g. an
overage load of 200 on an server with ncpu of 32.
The base times which were long to account for loading have been reduced,
and a multiplier of average-5 load / ncpu rounded to the nearest tenth
has been implemented (with 1.0 as the floor value). For example, a 4-core
machine with an average 5-minute load of 6.0 will multiply the base
timeout by 1.5. This approach worked well in an extreme test against the
entire ports tree.
This release improves robustness and activates the watchdog.
It leveraes the procctl functionality to ensure all processes spawned
from a builder are reaped, which in turn ensures that tmpfs mounts can
be dismounted. Previously stuck processes could prevent those dismounts,
trapping them as new mounts get placed on top.
This also finally enables the watchdog that will kill runaway builds.
The watchdog has a specific time limit per build phase where it will
kill the build if the log doesn't grow over the previous X minutes.
No activity timeout limits per phase are:
check_sanity : 1 minute
pkg_depends : 3 minutes
fetch : 480 minutes
checksum : 480 minutes (fetches if required)
extract_depends : 3 minutes
extract : 30 minutes
patch_depends : 3 minutes
patch : 3 minutes
build_depends : 5 minutes
build : 20 minutes
run_depends : 10 minutes
stage : 20 minutes
check_plist : 3 minutes
pkg_package : 120 minutes
install_mtree : 3 minutes
install : 10 minutes
deinstall : 10 minutes
A minor change regarding the swap display: If there is no swap installed,
it will now display "n/a" instead of "100%"
This is a minor bug fix version. Changes include:
* Set close-on-exec operation mode on popen. This is required to stop
leaking file descriptors in highly concurrent modes (e.g. 32 builders).
It's not supported on FreeBSD 9 or DragonFly 4.4 (and earlier) so this
modification is removed for those platforms.
* Remove procfs mount for lang/rust and lang/rust-nightly. This was
necessary for DragonFly, but rust has been fixed for DF 4.6 and later
* Add a stage-QA exception for entries left /var/spool/*. The presence
of these are not an identication of a port issue
* Sanitize synthexec to verify file descriptors 0 .. 2 are in use and
automatically close any file descriptor > 2 before execv fork.
Plasma5 ports
At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.
The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].
Changes to the KDE Ports needed by this:
Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4]
[1] http://src.mouf.net/area51/view/branches/plasma5/KDE/Mk/Uses/kde.mk
[2] The version in the plasma5 branch also handles frameworks/plasma5 and
handles MASTER_SITES via a KDE_DIST variable similar to bsd.qt.mk for Qt
Ports -- I chose to leave this out for now, as the diff is already large
enough.
[3] I chose USE_KDE instead of USE_KDE4, USE_KDE5, USE_KDEX as the version we
want is already specified as argument to kde:<arg>
[4] For KDE Frameworks and Plasma5 ports this would be kde:5
PR: 210667
Approved by: portmgr, mat (mentor), rakuco (mentor)
Reviewed by: mat, rakuco
Differential Revision: https://reviews.freebsd.org/D6961
- sandboxes always drops privileges if run as root and chroot in /var/empty
- sandboxes limits resource usage to make them less useless on system without capsicum
- drops privileges and chroot to /var/empty in various commands if run as root:
* pkg audit
* pkg info
* pkg (r)query
- While here, add NO_ARCH and turn ECHO_MSG's into pkg-message to be visible to package users as well
PR: 211956
Submitted by: sakaue.mamoru@mwghennndo.com (maintainer)
The master port was refactored to make tracking github repositories easier, but
this change was not reflected in the last update to ports-mgmt/portshaker.
During upgrades/reinstall javavmwrapper 2.5 pre deinstall script deletes the pkg
temporary files preventing to finish the upgrade.
A fixed version of javavmwrapper will be made soon, this hack will remain in the
ports tree and not in pkg(8) itself. This hack is made to not bother users is
only affecting upgrade/reinstall phase not proper deinstall
PR: 210313
the variable $unique_list was created with identical content, its value was
only set within the implicit sub-shell (2nd command in a pipe) and lost on
exit from the while loop.
Reported by: Jakub Laach
