in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
and new features. Don't believe me? Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.
DO NOT USE portupgrade by itself to upgrade to GNOME 2.12. Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh. This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.
In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen. The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>. His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.
The FreeBSD GNOME Team would lank to thank the following users for
their contributions to this release:
Matthew Luckie <mjl@luckie.org.nz>
ade
sajd on #freebsd-gnome
Caelian on #freebsd-gnome
mnag
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Mark Hobden <markhobden@gmail.com>
Sergey Akifyev <asa@agava.com>
Andreas Kohn
For more information on GNOME on FreeBSD, checkout
http://www.FreeBSD.org/gnome/. The 2.12 documentation will be
posted shortly.
- Fix the installation of error like this below by add graphics/netpbm in the
BUILD_DEPENDS.
pnmtopng: not found
pngtopnm: not found
pnmscale: not found
[...repeat...]
- Fix the ability of disable/enable xine, so you don't have to depend on xine
when the xine thumbnail plugin is disable (aka WITHOUT_XINE).
- Fix all of plugins/thumbnails build by add @LDFLAGS@ in each of
Makefile.in's LDFLAGS. That also make xine, music stuff and etc actually
work to create the thumbnails or/and do something.
- A few other fixes that make it builds better.
- Do not extract the CVS, now our filesystem and plist look prettier.
- Add new knobs:
WITH_DEBUG
WITH_ECORE_MAINLOOP
WITHOUT_EXTRACTOR
WITHOUT_ID3
WITHOUT_VORBIS
WITHOUT_XINE
Didn't add knobs for dbus, gnomevfs, avi and etc because they either doesn't
build or cause it crashes. As for KDE stuff like dcop and kio, I am lacking
to test them so someone will have to check and test it.
- Fix the plist.
- Bump the PORTREVISION.
Reported by: tmclaugh (can't build with plugins/thumbnails)
Approved by: Anders Troback <freebsd@troback.com> (maintainer)
fine without explicit version in there, while specifying it can
occasionally confuse (cf. ports/78527). Packages depend on specific
versions of Xaw3d and X libraries anyway and ports will get the right
version number through imake.
The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall. However, a lot of
FreeBSD specific additions and fixes have been made. For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support. See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.
GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work. We would also like to thank our adventurous users that chose to
ride the walrus. We'd especially like to thank the following users that
provided patches for GNOME 2.10:
ade
Yasuda Keisuke
Franz Klammer
Khairil Yusof
Radek Kozlowsk
And anyone else I may have accidentally omitted.
As with GNOME 2.8, 2.10 comes with a brand-spankin' new splashscreen
courtesy of Franz Klammer. However, unlike GNOME 2.8, we've included all
of the FreeBSD GNOME splashscreen entries with gnomesession. You can
use the deskutils/splashsetter port to choose the one you like best.
As always, GNOME users should _not_ use portupgrade alone to upgrade to
2.10. Instead, get the gnome_upgrade.sh script from
http://www.FreeBSD.org/gnome/gnome_upgrade.sh.
Enjoy!
- remove x11-fm/xfce4-fm-icons misc/xfce4-panel-themes (obsoleted by that update)
- take maintainership of x11-wm/xfce4-session [1]
- bump PORTREVISION of all plugins because they need to be linked against the new xfce4 libs
Approved by: maintainer [1]
Previously it was picked up by imake, which was run time dependency for
X libraries. Since this will no longer hold, specify perl explicitly.
Also reset maintainership:
<lukin@okbmei.msk.su>: host relay.orbita.ru[193.192.144.231] said: 550
lukin@okbmei.msk.su unknown user account (in reply to RCPT TO command)
Pointed out by: dosirak via kris, while testing X.Org upgrade
lost the small part. The small part was GCONF_SCHEMAS in bsd.gnome.mk that is
taking care of gconf key and schemas files for pkg-plist. Pav has committed by
re-add GCONF_SCHEMAS back in bsd.gnome.mk this afternoon. Therefore, must bump
PORTREVISION to correct our pkg-plist database installed.
This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.
This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team. The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).
Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD. We would
especially like to thank those users that provided patches for GNOME 2.7 and
2.8:
Franz Klammer <klammer@webonaut.com>
Piotr Smyrak <piotr.smyrak@heron.pl>
Radek Kozlowski <radek@raadradd.com>
Khairil Yusof <kaeru@pd.jaring.my>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Vladimir Grebenschikov <vova@fbsd.ru>
GNOME 2.8 also features a new, FreeBSD-specific splashscreen that
was designed by jimmac for GNOME 2.8, then daemonized by
Franz Klammer <klammer@webonaut.com> and Radek Kozlowski
<radek@raadradd.com>.
As with GNOME 2.6, you cannot just "portupgrade" to GNOME 2.8. There is
a script provided at http://www.marcuscom.com/downloads/gnome_upgrade28.sh
that will aid in the upgrade process. Full documentation on the GNOME 2.8
upgrade is coming following this commit.
From all of us at FreeBSD GNOME, ENJOY!
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
