kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/mail/vpopmail-stable/Makefile
Peter Pentchev 4715f698e0 Apply a blessed +3 magic wand of autotools protection; a rogue run of 
autoconf or automake over our local patches can ruin your whole day.
This rarely, if ever, affected the vpopmail ports, causing mysterious
failures at install time, but inevitably killed the stunnel build if
automake-1.5 happened to be installed.

Reported by:	Dan Langille <dan@langille.org> for stunnel,
		Sitchin Zech <mailsagan@yahoo.com> for vpopmail
2002-09-20 19:55:07 +00:00

217 lines
7 KiB
Makefile
Raw Blame History

# New ports collection makefile for: vpopmail
# Date created: 21 Sep 2000
# Whom: Neil Blakey-Milner
#
# $FreeBSD$
#
PORTNAME= vpopmail
PORTVERSION= 5.2.1
CATEGORIES= mail
MASTER_SITES= http://www.inter7.com/vpopmail/
PKGNAMESUFFIX= -stable
MAINTAINER= roam@FreeBSD.org
BUILD_DEPENDS= ${QMAIL_DIR}/bin/qmail-send:${PORTSDIR}/mail/qmail \
${LOCALBASE}/bin/tcprules:${PORTSDIR}/sysutils/ucspi-tcp
RUN_DEPENDS= ${QMAIL_DIR}/bin/qmail-send:${PORTSDIR}/mail/qmail \
${LOCALBASE}/bin/tcprules:${PORTSDIR}/sysutils/ucspi-tcp
GNU_CONFIGURE= YES
USE_GMAKE= YES
USE_REINPLACE= YES
VCFGDIR?= ${WRKDIR}/vcfg
VCFGFILES?= inc_deps lib_deps tcp.smtp
CONFIGURE_ENV+= VCFGDIR="${VCFGDIR}"
CONFIGURE_ARGS= --enable-qmaildir=${QMAIL_DIR} \
--enable-tcprules-bin=${LOCALBASE}/bin/tcprules \
--enable-tcpserver-file=${PREFIX}/vpopmail/etc/tcp.smtp
#
# User-configurable variables
#
# Define these to change from the default behaviour
#
# WITH_PASSWD - allow authentication off /etc/passwd
# WITH_MD5_PASSWORDS - store encrypted passwords in MD5 format
# WITH_MYSQL - allow authentitation via mysql
# WITH_MYSQL_LARGE_SITE - enables large site layout
# WITH_CLEAR_PASSWD - store passwords in plaintext into the MySQL db
# WITH_APOP - allow apop authentication
# WITHOUT_ROAMING - disallow roaming users
# WITH_IP_ALIAS - enables IP aliasing
# WITH_DELIVER_FILTER - enables the experimental vdelivermail filter
# WITH_QMAIL_EXT - enables qmail-like user-* address extesions processing
#
# Set these to the values you'd prefer
#
# HARDQUOTA - size of hard quota, or 'n' for no hard quota
# RELAYCLEAR - time in minutes before clearing relay hole (requires roaming)
# DEFAULT_DOMAIN - default domain for non-vhost lookups
# LOGLEVEL - n - no logging, y - log all,
# e - log errors, p - log passwords in errors
# APOPFILE - location of apop secrets file
# QMAIL_DIR - location of qmail directory
# PREFIX - installation area for vpopmail (see comment below)
# VCHKPW_GID - the group ID of the new vchkpw group (89)
# VPOPMAIL_UID - the user ID of the new vpopmail user (89)
# WITH_MYSQL_SERVER - the hostname of the MySQL server (localhost)
# WITH_MYSQL_USER - the username for connecting to the MySQL server (root)
# WITH_MYSQL_PASSWD - the password for connecting to the MySQL server (secret)
# WITH_MYSQL_DB - the name of the MySQL database to use (vpopmail)
# The server, user and password variables may be defined separately
# for read and update access, allowing you to set up a less-priviledged
# MySQL connection account with read-only access, and another one which
# is used for administrative purposes:
# WITH_MYSQL_READ_SERVER, WITH_MYSQL_READ_USER, WITH_MYSQL_READ_PASSWD
# WITH_MYSQL_UPDATE_SERVER, WITH_MYSQL_UPDATE_USER, WITH_MYSQL_UPDATE_PASSWD
# Those variables, if defined, override WITH_MYSQL_{SERVER,USER,PASSWD}
#
HARDQUOTA?= 10000000
RELAYCLEAR?= 30
LOGLEVEL?= y
APOPFILE?= /usr/local/vpopmail/etc/apop-secrets
.if exists(${LOCALBASE}/qmail/bin/qmail-send)
QMAIL_DIR?= ${LOCALBASE}/qmail
.else
QMAIL_DIR?= /var/qmail
.endif
# Uncomment this, or set PREFIX to /home if you have an existing
# vpopmail install with the vpopmail users' home directory set to
# /home/vpopmail - package rules dictate we default to /usr/local/vpopmail
#
#PREFIX?= /home
# End of user-configurable variables
#
# Some suggestions from Gabriel Ambuehl <gabriel_ambuehl@buz.ch>
#
CONFIGURE_ARGS+= --enable-defaultquota=${HARDQUOTA} \
--enable-logging=${LOGLEVEL}
.if defined(WITH_PASSWD)
CONFIGURE_ARGS+= --enable-passwd=y
.endif
.if defined(WITH_MD5_PASSWORDS)
CONFIGURE_ARGS+= --enable-md5-passwords=y
.endif
.if defined(WITH_APOP)
CONFIGURE_ARGS+= --enable-apop=y \
--enable-apop-file=${APOPFILE}
.else
CONFIGURE_ARGS+= --enable-apop=n
.endif
.if defined(WITH_SQWEBMAIL)
CONFIGURE_ARGS+= --enable-sqwebmail-pass=y
.endif
.if !defined(WITHOUT_ROAMING)
CONFIGURE_ARGS+= --enable-roaming-users=y \
--enable-relay-clear-minutes=${RELAYCLEAR}
.endif
.if !defined(WITH_CLEAR_PASSWD)
CONFIGURE_ARGS+= --enable-clear-passwd=n
.endif
.if defined(WITH_MYSQL)
LIB_DEPENDS+= mysqlclient.10:${PORTSDIR}/databases/mysql323-client
CONFIGURE_ARGS+= --enable-mysql=y \
--enable-sqlincdir=${LOCALBASE}/include/mysql \
--enable-sqllibdir=${LOCALBASE}/lib/mysql
.if defined(WITH_MYSQL_LARGE_SITE)
CONFIGURE_ARGS+= --enable-large-site=y
.endif
.if defined(WITH_MYSQL_SERVER)
WITH_MYSQL_READ_SERVER?= ${WITH_MYSQL_SERVER}
WITH_MYSQL_UPDATE_SERVER?= ${WITH_MYSQL_SERVER}
.endif
.if defined(WITH_MYSQL_USER)
WITH_MYSQL_READ_USER?= ${WITH_MYSQL_USER}
WITH_MYSQL_UPDATE_USER?= ${WITH_MYSQL_USER}
.endif
.if defined(WITH_MYSQL_PASSWD)
WITH_MYSQL_READ_PASSWD?= ${WITH_MYSQL_PASSWD}
WITH_MYSQL_UPDATE_PASSWD?= ${WITH_MYSQL_PASSWD}
.endif
.endif
.if defined(DEFAULT_DOMAIN)
CONFIGURE_ARGS+= --enable-default-domain=${DEFAULT_DOMAIN}
.endif
.if defined(WITH_IP_ALIAS)
CONFIGURE_ARGS+= --enable-ip-alias-domains=y
.endif
.if defined(WITH_DELIVER_FILTER)
CONFIGURE_ARGS+= --enable-deliver-filter=y
.endif
.if defined(WITH_QMAIL_EXT)
CONFIGURE_ARGS+= --enable-qmail-ext=y
.endif
# autoconf and automake can remove our patches to the configure scripts.
post-patch:
@${FIND} ${WRKSRC} -type f -name Makefile.in | ${XARGS} ${REINPLACE_CMD} -E -e 's,@(ACLOCAL|AUTO(MAKE|CONF|HEADER))@,/usr/bin/true,'
#
# This port doesn't honour PREFIX, it honours vpopmail's home directory.
# Since we create vpopmail if it doesn't exist, we set it so that it
# does honour PREFIX. -- nbm
#
pre-configure:
@PKG_PREFIX=${PREFIX}/vpopmail ${PERL5} ${PKGINSTALL}
.if defined(WITH_MYSQL)
.if defined(WITH_MYSQL_UPDATE_SERVER)
${PERL} -pi -e "s/(#define MYSQL_UPDATE_SERVER.*)localhost(.*)/\$$1${WITH_MYSQL_UPDATE_SERVER}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_READ_SERVER)
${PERL} -pi -e "s/(#define MYSQL_READ_SERVER.*)localhost(.*)/\$$1${WITH_MYSQL_READ_SERVER}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_UPDATE_USER)
${PERL} -pi -e "s/(#define MYSQL_UPDATE_USER.*)root(.*)/\$$1${WITH_MYSQL_UPDATE_USER}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_READ_USER)
${PERL} -pi -e "s/(#define MYSQL_READ_USER.*)root(.*)/\$$1${WITH_MYSQL_READ_USER}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_UPDATE_PASSWD)
${PERL} -pi -e "s/(#define MYSQL_UPDATE_PASSWD.*)secret(.*)/\$$1${WITH_MYSQL_UPDATE_PASSWD}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_READ_PASSWD)
${PERL} -pi -e "s/(#define MYSQL_READ_PASSWD.*)secret(.*)/\$$1${WITH_MYSQL_READ_PASSWD}\$$2/" ${WRKSRC}/vmysql.h
.endif
.if defined(WITH_MYSQL_DB)
${PERL} -pi -e "s/(#define MYSQL_DATABASE.*)vpopmail(.*)/\$$1${WITH_MYSQL_DB}\$$2/" ${WRKSRC}/vmysql.h
.endif
.endif
${MKDIR} ${VCFGDIR}
post-install:
${CHMOD} o-rwx ${PREFIX}/vpopmail/bin ${PREFIX}/vpopmail/lib
${MKDIR} ${PREFIX}/vpopmail/etc
if [ ! -f "${PREFIX}/vpopmail/etc/tcp.smtp" ]; then \
if [ -f "${VCFGDIR}/tcp.smtp" ]; then \
${INSTALL_DATA} ${VCFGDIR}/tcp.smtp ${PREFIX}/vpopmail/etc/; \
else \
${TOUCH} ${PREFIX}/vpopmail/etc/tcp.smtp; \
fi; \
fi
${INSTALL_DATA} ${VCFGDIR}/inc_deps ${VCFGDIR}/lib_deps ${PREFIX}/vpopmail/etc/
.include <bsd.port.mk>
Reference in a new issue View git blame Copy permalink