freebsd-ports/Mk/bsd.port.subdir.mk
Pav Lucistnik cc2ccf081b - Skip comments blocks when 'make search'ing in MOVED file
- Also rewrap a long line

PR:		ports/143955
Submitted by:	pluknet <pluknet@gmail.com>
2010-05-25 15:18:06 +00:00

538 lines
17 KiB
Makefile

#-*- mode: makefile; tab-width: 4; -*-
# ex:ts=4
#
# from: @(#)bsd.subdir.mk 5.9 (Berkeley) 2/1/91
# $FreeBSD$
#
# The include file <bsd.port.subdir.mk> contains the default targets
# for building ports subdirectories.
#
#
# +++ variables +++
#
# STRIP - The flag passed to the install program to cause the binary
# to be stripped. This is to be used when building your
# own install script so that the entire system can be made
# stripped/not-stripped using a single knob. [-s]
#
# OPSYS - Get the operating system type [`uname -s`]
#
# SUBDIR - A list of subdirectories that should be built as well.
# Each of the targets will execute the same target in the
# subdirectories.
#
#
# +++ targets +++
#
# README.html:
# Creating README.html for package.
#
# afterinstall, all, beforeinstall, build, checksum, clean,
# clean-for-cdrom, clean-restricted,
# clean-for-cdrom-list, clean-restricted-list,
# configure, deinstall,
# depend, depends, describe, extract, fetch, fetch-list,
# ignorelist, ignorelist-verbose,
# install, maintainer, makesum, package, readmes, realinstall, reinstall,
# tags
#
# search:
# Search for ports using either 'make search key=<keyword>'
# or 'make search name=<keyword>'.
PORTSDIR?= /usr/ports
TEMPLATES?= ${PORTSDIR}/Templates
.if defined(PORTSTOP)
README= ${TEMPLATES}/README.top
.else
README= ${TEMPLATES}/README.category
.endif
MOVEDDIR?= ${PORTSDIR}
MOVEDFILE?= MOVED
# XXX Are these needed here? DESCR was set wrong for a few years
MASTERDIR?= ${.CURDIR}
PKGDIR?= ${MASTERDIR}
DESCR?= ${PKGDIR}/pkg-descr
.include "${PORTSDIR}/Mk/bsd.commands.mk"
.MAIN: all
.if !defined(DEBUG_FLAGS)
STRIP?= -s
.endif
# These are variables that are invariant for the lifetime of a recursive port traversal
# (index build, etc), so it is more efficient to precompute them here and pass them in
# to child makes explicitly, instead of recomputing them tens of thousands of times.
.if !defined(NOPRECIOUSMAKEVARS)
.if !defined(ARCH)
ARCH!= ${UNAME} -p
.endif
.if !defined(OSVERSION)
.if exists(/usr/include/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
.elif exists(/usr/src/sys/sys/param.h)
OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h
.else
OSVERSION!= ${SYSCTL} -n kern.osreldate
.endif
.endif
.if !defined(_OSRELEASE)
_OSRELEASE!= uname -r
.endif
.if !defined(OSREL)
OSREL= ${_OSRELEASE:C/[-(].*//}
.endif
.if !defined(OPSYS)
OPSYS!= ${UNAME} -s
.endif
.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
.if !defined(HAVE_COMPAT_IA32_KERN)
HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi
.endif
.endif
.if !defined(CONFIGURE_MAX_CMD_LEN)
CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax
.endif
.if !defined(PYTHON_DEFAULT_VERSION)
PYTHON_DEFAULT_VERSION!= make -V PYTHON_DEFAULT_VERSION USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(PYTHON_DEFAULT_PORTVERSION)
# We are caching the PYTHON_PORTVERSION of the default python version so we can reuse it in the
# common case.
PYTHON_DEFAULT_PORTVERSION!= make -V PYTHON_PORTVERSION USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(PYTHONBASE)
PYTHONBASE!= make -V PYTHONBASE USE_PYTHON=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(_JAVA_VERSION_LIST_REGEXP)
_JAVA_VERSION_LIST_REGEXP!= make -V _JAVA_VERSION_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(_JAVA_VENDOR_LIST_REGEXP)
_JAVA_VENDOR_LIST_REGEXP!= make -V _JAVA_VENDOR_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(_JAVA_OS_LIST_REGEXP)
_JAVA_OS_LIST_REGEXP!= make -V _JAVA_OS_LIST_REGEXP USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(_JAVA_PORTS_INSTALLED)
_JAVA_PORTS_INSTALLED!= make -V _JAVA_PORTS_INSTALLED USE_JAVA=1 -f ${PORTSDIR}/Mk/bsd.port.mk
.endif
.if !defined(UID)
UID!= ${ID} -u
.endif
.if exists(${LOCALBASE}/sbin/pkg_info)
PKG_INFO?= ${LOCALBASE}/sbin/pkg_info
.else
PKG_INFO?= /usr/sbin/pkg_info
.endif
.if !defined(PKGINSTALLVER)
PKGINSTALLVER!= ${PKG_INFO} -P 2>/dev/null | ${SED} -e 's/.*: //'
.endif
.endif
INDEXDIR?= ${PORTSDIR}
INDEXFILE?= INDEX-${OSVERSION:C/([0-9]).*/\1/}
# local customization of the ports tree
.if exists(${.CURDIR}/Makefile.local)
.include "${.CURDIR}/Makefile.local"
.endif
TARGETS+= all
TARGETS+= build
TARGETS+= checksum
TARGETS+= clean
TARGETS+= clean-for-cdrom
TARGETS+= clean-for-cdrom-list
TARGETS+= clean-restricted
TARGETS+= clean-restricted-list
TARGETS+= configure
TARGETS+= deinstall
TARGETS+= depend
TARGETS+= depends
TARGETS+= distclean
TARGETS+= extract
TARGETS+= fetch
TARGETS+= fetch-list
TARGETS+= ignorelist
TARGETS+= ignorelist-verbose
TARGETS+= makesum
TARGETS+= maintainer
TARGETS+= package
TARGETS+= package-recursive
TARGETS+= realinstall
TARGETS+= reinstall
TARGETS+= tags
.for __target in ${TARGETS}
.if !target(${__target})
.if defined(SUBDIR) && !empty(SUBDIR)
${__target}: ${SUBDIR:S/^/_/:S/$/.${__target}/}
.else
${__target}:
.endif
.endif
.endfor
.if defined(SUBDIR) && !empty(SUBDIR)
.for __target in ${TARGETS} checksubdirs describe readmes
${SUBDIR:S/^/_/:S/$/.${__target}/}: _SUBDIRUSE
.endfor
_SUBDIRUSE: .USE
@OK=""; sub=${.TARGET:S/^_//:R}; \
for dud in $$DUDS; do \
if [ $${dud} = $$sub ]; then \
OK="false"; \
${ECHO_MSG} "===> ${DIRPRFX}$$sub skipped"; \
fi; \
done; \
if test -d ${.CURDIR}/$${sub}.${MACHINE_ARCH}; then \
edir=$${sub}.${MACHINE_ARCH}; \
elif test -d ${.CURDIR}/$${sub}; then \
edir=$${sub}; \
else \
OK="false"; \
${ECHO_MSG} "===> ${DIRPRFX}$${sub} non-existent"; \
fi; \
if [ "$$OK" = "" ]; then \
${ECHO_MSG} "===> ${DIRPRFX}$${edir}"; \
cd ${.CURDIR}/$${edir}; \
${MAKE} -B ${.TARGET:E:realinstall=install} \
DIRPRFX=${DIRPRFX}$$edir/; \
fi
.for _subdir in ${SUBDIR:S/^/_/}
${_subdir}:: ${_subdir:S/$/.all/}
.endfor
.endif
.if !target(install)
.if !target(beforeinstall)
beforeinstall:
.endif
.if !target(afterinstall)
afterinstall:
.endif
install: afterinstall
afterinstall: realinstall
realinstall: beforeinstall ${SUBDIR:S/^/_/:S/$/.realinstall/}
.endif
IGNOREDIR= CVS Mk Templates Tools distfiles packages pkg
.if !target(checksubdirs)
.if defined(PORTSTOP)
checksubdirs: checksubdir ${SUBDIR:S/^/_/:S/$/.checksubdirs/}
.else
checksubdirs: checksubdir
.endif
.endif
.if !target(checksubdir)
checksubdir:
@for d in *; do \
if [ -d "$$d" ]; then \
found=0; \
for s in ${SUBDIR} ${IGNOREDIR}; do \
if [ "x$$s" = "x$$d" ]; then \
found=1; \
break; \
fi; \
done; \
if [ $$found = 0 ]; then \
${ECHO_MSG} "Warning: directory $$d not in SUBDIR"; \
fi; \
fi; \
done
@for s in ${SUBDIR}; do \
if ! [ -d ${.CURDIR}/$$s ]; then \
${ECHO_MSG} "Warning: directory $$s in SUBDIR does not exist"; \
fi \
done
.endif
.if !target(describe)
.if defined(PORTSTOP)
# This is a bit convoluted to deal with the fact that make will overlap I/O from child make processes
# if they write more than 2k: this will corrupt the INDEX file. make -P does not do this, but it adds
# extraneous output and redirects stderr, so we lose error reporting from child makes. Instead we have
# to roll our own implementation of make -P and make sure that each child make writes to their own file,
# which we will combine at the end. This gives substantial performance benefits over doing a make -j1
.if defined(BUILDING_INDEX)
describe: ${SUBDIR:S/^/describe./}
.for i in ${SUBDIR}
describe.$i:
@cd ${.CURDIR}; ${MAKE} -B ${i:S/^/_/:S/$/.describe/} > ${INDEX_TMPDIR}/${INDEXFILE}.desc.${i}
.endfor
.else
describe: ${SUBDIR:S/^/_/:S/$/.describe/}
.endif
.else
describe:
@for sub in ${SUBDIR}; do \
if ${TEST} -d ${.CURDIR}/$${sub}; then \
${ECHO_MSG} "===> ${DIRPRFX}$${sub}"; \
cd ${.CURDIR}/$${sub}; \
${MAKE} -B describe || \
(${ECHO_CMD} "===> ${DIRPRFX}$${sub} failed" >&2; \
exit 1) ;\
else \
${ECHO_MSG} "===> ${DIRPRFX}$${sub} non-existent"; \
fi; \
done
.endif
.endif
.if !target(readmes)
.if defined(PORTSTOP)
readmes: readme ${SUBDIR:S/^/_/:S/$/.readmes/}
@${ECHO_MSG} "===> Creating README.html for all ports"
@perl ${PORTSDIR}/Tools/make_readmes < ${INDEXDIR}/${INDEXFILE}
.else
readmes: readme
.endif
.endif
.if !target(readme)
readme:
@${RM} -f README.html
@${MAKE} README.html
.endif
HTMLIFY= ${SED} -e 's/&/\&amp;/g' -e 's/>/\&gt;/g' -e 's/</\&lt;/g'
package-name:
@${ECHO_CMD} ${.CURDIR} | ${SED} -e 's^.*/^^'
README.html:
@${ECHO_CMD} "===> Creating README.html"
@> $@.tmp
.for entry in ${SUBDIR}
.if exists(${entry})
.if defined(PORTSTOP)
@${ECHO_CMD} -n '<a href="'${entry}/README.html'">'"`${ECHO_CMD} ${entry} | ${HTMLIFY}`"'</a>: ' >> $@.tmp
.else
@${ECHO_CMD} -n '<a href="'${entry}/README.html'">'"`cd ${entry}; ${MAKE} package-name | ${HTMLIFY}`</a>: " >> $@.tmp
.endif
@${ECHO_CMD} `cd ${entry}; ${MAKE} -V COMMENT` | ${HTMLIFY} >> $@.tmp
.endif
.endfor
@${SORT} -t '>' +1 -2 $@.tmp > $@.tmp2
.if exists(${DESCR})
@${HTMLIFY} ${DESCR} > $@.tmp3
.else
@> $@.tmp3
.endif
.if defined(COMMENT)
@${ECHO_CMD} "${COMMENT}" | ${HTMLIFY} > $@.tmp4
.else
@> $@.tmp4
.endif
@${CAT} ${README} | \
${SED} -e 's/%%CATEGORY%%/'"`basename ${.CURDIR}`"'/g' \
-e '/%%COMMENT%%/r$@.tmp4' \
-e '/%%COMMENT%%/d' \
-e '/%%DESCR%%/r$@.tmp3' \
-e '/%%DESCR%%/d' \
-e '/%%SUBDIR%%/r$@.tmp2' \
-e '/%%SUBDIR%%/d' \
> $@
@${RM} -f $@.tmp $@.tmp2 $@.tmp3 $@.tmp4
# Pass in the cached invariant variables to child makes.
# XXX Why are we trying to escape these characters using regexps and not using ':Q'?
.if !defined(NOPRECIOUSMAKEVARS)
.MAKEFLAGS: \
ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
UID="${UID:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
PKGINSTALLVER="${PKGINSTALLVER:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
HAVE_COMPAT_IA32_KERN="${HAVE_COMPAT_IA32_KERN}" \
CONFIGURE_MAX_CMD_LEN="${CONFIGURE_MAX_CMD_LEN}" \
PYTHON_DEFAULT_VERSION="${PYTHON_DEFAULT_VERSION}" \
PYTHON_DEFAULT_PORTVERSION="${PYTHON_DEFAULT_PORTVERSION}" \
PYTHONBASE="${PYTHONBASE}" \
_JAVA_VERSION_LIST_REGEXP="${_JAVA_VERSION_LIST_REGEXP}" \
_JAVA_VENDOR_LIST_REGEXP="${_JAVA_VENDOR_LIST_REGEXP}" \
_JAVA_OS_LIST_REGEXP="${_JAVA_OS_LIST_REGEXP}" \
_JAVA_PORTS_INSTALLED="${_JAVA_PORTS_INSTALLED}"
.endif
PORTSEARCH_DISPLAY_FIELDS?=name,path,info,maint,index,bdeps,rdeps,www
PORTSEARCH_KEYLIM?=0
PORTSEARCH_XKEYLIM?=0
PORTSEARCH_IGNORECASE?=1
PORTSEARCH_MOVED?=1
_PORTSEARCH= \
here=${.CURDIR}; \
if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
${ECHO_MSG} "The ${.TARGET} target requires ${INDEXFILE}. Please run make index or make fetchindex."; \
else \
cd ${PORTSDIR}; \
if [ -z "$$key" -a -z "$$xkey" -a \
-z "$$name" -a -z "$$xname" -a \
-z "$$path" -a -z "$$xpath" -a \
-z "$$info" -a -z "$$xinfo" -a \
-z "$$maint" -a -z "$$xmaint" -a \
-z "$$cat" -a -z "$$xcat" -a \
-z "$$bdeps" -a -z "$$xbdeps" -a \
-z "$$rdeps" -a -z "$$xrdeps" -a \
-z "$$www" -a -z "$$xwww" ]; \
then \
${ECHO_MSG} "The ${.TARGET} target requires a keyword parameter or name parameter,"; \
${ECHO_MSG} "e.g.: \"make ${.TARGET} key=somekeyword\""; \
${ECHO_MSG} "or \"make ${.TARGET} name=somekeyword\""; \
exit; \
fi; \
${AWK} -F\| -v there="$$here/" -v top="$$(pwd -P)" \
-v key="$$key" -v xkey="$$xkey" \
-v name="$$name" -v xname="$$xname" \
-v path="$$path" -v xpath="$$xpath" \
-v info="$$info" -v xinfo="$$xinfo" \
-v maint="$$maint" -v xmaint="$$xmaint" \
-v cat="$$cat" -v xcat="$$xcat" \
-v bdeps="$$bdeps" -v xbdeps="$$xbdeps" \
-v rdeps="$$rdeps" -v xrdeps="$$xrdeps" \
-v www="$$www" -v xwww="$$xwww" \
-v icase="$${icase:-${PORTSEARCH_IGNORECASE}}" \
-v keylim="$${keylim:-${PORTSEARCH_KEYLIM}}" \
-v xkeylim="$${xkeylim:-${PORTSEARCH_XKEYLIM}}" \
-v display="$${display:-${PORTSEARCH_DISPLAY_FIELDS}}" \
-v xdisplay="$$xdisplay" \
'BEGIN { \
gsub(/\+/,"\\+",name); \
if (substr(there, 1, length(top)) == top) \
there = "${PORTSDIR}" substr(there, 1 + length(top)); \
therelen = length(there); \
keylen = length(key); keylim = keylim && keylen; \
if (!keylim && keylen) \
parms[0] = (icase ? tolower(key) : key); \
xkeylen = length(xkey); xkeylim = xkeylim && xkeylen; \
if (!xkeylim && xkeylen) \
xparms[0] = (icase ? tolower(xkey) : xkey); \
if (icase) { \
if (length(name)) parms[1] = tolower(name); if (length(xname)) xparms[1] = tolower(xname); \
if (length(path)) parms[2] = tolower(path); if (length(xpath)) xparms[2] = tolower(xpath); \
if (length(info)) parms[4] = tolower(info); if (length(xinfo)) xparms[4] = tolower(xinfo); \
if (length(maint)) parms[6] = tolower(maint); if (length(xmaint)) xparms[6] = tolower(xmaint); \
if (length(cat)) parms[7] = tolower(cat); if (length(xcat)) xparms[7] = tolower(xcat); \
if (length(bdeps)) parms[8] = tolower(bdeps); if (length(xbdeps)) xparms[8] = tolower(xbdeps); \
if (length(rdeps)) parms[9] = tolower(rdeps); if (length(xrdeps)) xparms[9] = tolower(xrdeps); \
if (length(www)) parms[10] = tolower(www); if (length(xwww)) xparms[10] = tolower(xwww); \
} else { \
if (length(name)) parms[1] = name; if (length(xname)) xparms[1] = xname; \
if (length(path)) parms[2] = path; if (length(xpath)) xparms[2] = xpath; \
if (length(info)) parms[4] = info; if (length(xinfo)) xparms[4] = xinfo; \
if (length(maint)) parms[6] = maint; if (length(xmaint)) xparms[6] = xmaint; \
if (length(cat)) parms[7] = cat; if (length(xcat)) xparms[7] = xcat; \
if (length(bdeps)) parms[8] = bdeps; if (length(xbdeps)) xparms[8] = xbdeps; \
if (length(rdeps)) parms[9] = rdeps; if (length(xrdeps)) xparms[9] = xrdeps; \
if (length(www)) parms[10] = www; if (length(xwww)) xparms[10] = xwww; \
} \
fields["name"] = 1; names[1] = "Port"; \
fields["path"] = 2; names[2] = "Path"; \
fields["info"] = 4; names[4] = "Info"; \
fields["maint"] = 6; names[6] = "Maint"; \
fields["cat"] = 7; names[7] = "Index"; \
fields["bdeps"] = 8; names[8] = "B-deps"; \
fields["rdeps"] = 9; names[9] = "R-deps"; \
fields["www"] = 10; names[10] = "WWW"; \
split(display, d, /,[ \t]*/); \
split(xdisplay, xd, /,[ \t]*/); \
for (i in d) { \
toprint = 1; \
for (j in xd) { \
if (d[i] == xd[j] ) { \
toprint=0; \
break; \
}\
} \
if (toprint == 1 ) disp[fields[d[i]]] = 1; \
} \
} \
{ \
if (match($$2, "^/usr/ports/[^/]*/[^/]*$$") > 0) \
sub("^/usr/ports", "${PORTSDIR}", $$2); \
if (substr($$2, 1, therelen) != there) \
next; \
for (i in parms) \
if ((icase ? tolower($$i) : $$i) !~ parms[i]) \
next; \
for (i in xparms) \
if ((icase ? tolower($$i) : $$i) ~ xparms[i]) \
next; \
found = 0; \
for (i = 1; i < 11; i++) \
if (i in disp) { \
if (xkeylim && (icase ? tolower($$i) : $$i) ~ xkey) \
next; \
if (!found && keylim && (icase ? tolower($$i) : $$i) ~ key) \
found = 1; \
} \
if (keylim && !found) \
next; \
for (i = 1; i < 11; i++) \
if (i in disp) \
printf("%s:\t%s\n", names[i], $$i); \
print(""); \
}' ${INDEXDIR}/${INDEXFILE}; \
if [ "$$name" -o "$$xname" ] && [ ${PORTSEARCH_MOVED} -gt 0 ]; \
then \
${AWK} -F\| -v name="$$name" -v xname="$$xname" \
-v icase="$${icase:-${PORTSEARCH_IGNORECASE}}" \
'BEGIN { \
if (icase) { \
if (length(name)) name = tolower(name); if (length(xname)) xname = tolower(xname); \
} \
fields["name"] = 1; names[1] = "Port"; \
fields["destination"] = 2; names[2] = "Moved"; \
fields["date"] = 3; names[3] = "Date"; \
fileds["reason"] = 4; names[4] = "Reason"; \
} \
{ \
oldname = $$1; newname = $$2; \
if (oldname ~ /^\#/) next; \
sub(".*\/", "", oldname); newname = sub(".*\/", "", newname); \
if (((icase ? tolower(oldname) : oldname) ~ name) || \
((icase ? tolower(newname) : newname) ~ name)) { \
for (i = 1; i <= 4; i++) { \
printf("%s:\t%s\n", names[i], $$i); \
} \
print(""); \
} \
}' ${MOVEDDIR}/${MOVEDFILE}; \
fi \
fi
search:
@${_PORTSEARCH}
quicksearch:
@export display="name,path,info" ; \
${_PORTSEARCH}