kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/Mk/Uses/perl5.mk
Mathieu Arnold 61de712f46 Remove all the bootstrap files (.bs) from the plists. 
Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight
2014-06-10 12:14:12 +00:00

289 lines
9.5 KiB
Makefile
Raw Blame History

# $FreeBSD$
#
# Provide support to use perl5
#
# PERL5 - Set to full path of perl5, either in the system or
# installed from a port.
# PERL - Set to full path of perl5, either in the system or
# installed from a port, but without the version number.
# Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION - Full version of perl5 (see below for current value).
#
# PERL_VER - Short version of perl5 (major.minor without patchlevel)
#
# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
# M is major version, N is minor version, and P is
# the patch level. E.g., PERL_VERSION=5.14.4 would give
# a PERL_LEVEL of 501404. This can be used in comparisons
# to determine if the version of perl is high enough,
# whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
# (value: mach).
# PERL_PORT - Name of the perl port that is installed
# (value: perl5.14)
# SITE_PERL - Directory name where site specific perl packages go.
# This value is added to PLIST_SUB.
# USE_PERL5 - If set, this port uses perl5 in one or more of the extract,
# patch, build, install or run phases. The fixpacklist is
# needed in some cases, when a .packlist is created, it may
# reference ${STAGEDIR}
# It can also have configure, modbuild and modbuildtiny when
# the port needs to run Makefile.PL, Build.PL and a
# Module::Build::Tiny flavor of Build.PL.
#
# MAINTAINER: perl@FreeBSD.org
.if !defined(_INCLUDE_USES_PERL5_MK)
_INCLUDE_USES_PERL5_MK= yes
.if defined(perl5_ARGS)
IGNORE= Incorrect 'USES+=perl5:${perl5_ARGS}' perl5 takes no arguments
.endif
USE_PERL5?= run build
.if exists(${LOCALBASE}/bin/perl5)
.sinclude "${LOCALBASE}/etc/perl5_version"
.if !defined(PERL_VERSION)
PERL_VERSION!= perl -e 'printf "%vd\n", $$^V;'
.endif
.else
.include "${PORTSDIR}/Mk/bsd.default-versions.mk"
.if ${PERL5_DEFAULT} == 5.14
PERL_VERSION= 5.14.4
.elif ${PERL5_DEFAULT} == 5.16
PERL_VERSION= 5.16.3
.elif ${PERL5_DEFAULT} == 5.18
PERL_VERSION= 5.18.2
.elif ${PERL5_DEFAULT} == 5.20
PERL_VERSION= 5.20.0
.else
IGNORE= Invalid perl5 version ${PERL5_DEFAULT}
.endif
.endif
PERL_VER?= ${PERL_VERSION:C/\.[0-9]+$//}
.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|}
_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|}
perl_minor= ${_perl_minor:C|^.*(...)|\1|}
.if ${perl_minor} >= 100
perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|}
perl_patch= ${PERL_VERSION:C|^.*(..)|\1|}
.else # ${perl_minor} < 100
_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|}
perl_patch= ${_perl_patch:C|^.*(..)|\1|}
.endif # ${perl_minor} < 100
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
.else
PERL_LEVEL=0
.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
PERL_ARCH?= mach
# there must always be a default to prevent dependency failures such
# as "ports/lang: not found"
.if ${PERL_LEVEL} >= 502000
PERL_PORT?= perl5.20
.elif ${PERL_LEVEL} >= 501800
PERL_PORT?= perl5.18
.elif ${PERL_LEVEL} >= 501600
PERL_PORT?= perl5.16
.else # ${PERL_LEVEL} < 501600
PERL_PORT?= perl5.14
.endif
SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER}
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL= ${LOCALBASE}/bin/perl
CONFIGURE_ENV+= ac_cv_path_PERL=${PERL} ac_cv_path_PERL_PATH=${PERL}
# Define the want perl first if defined
.if ${USE_PERL5:M5*}
want_perl_sign= ${USE_PERL5:M5*:C|^[0-9.]+||}
want_perl_ver= ${USE_PERL5:M5*:S|${want_perl_sign}$||}
want_perl_major= ${want_perl_ver:C|\..*||}
_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch}
.endif
# All but version
_USE_PERL5= ${USE_PERL5:N5*}
# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
.if empty(_want_perl_minor)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|}
.elif empty(_want_perl_patch)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|}
.else
masked_PERL_LEVEL= ${PERL_LEVEL}
.endif
.if defined(want_perl_sign)
.if ${want_perl_sign} == "+"
.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl${want_perl_major}.${want_perl_minor:C|^0||} and try again
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == ""
.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == "-"
.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver}
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
.else # wrong suffix
IGNORE= improper use of USE_PERL5
.endif
.endif
_USES_POST+= perl5
.endif
.if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PERL5_POST_MK)
_INCLUDE_USES_PERL5_POST_MK= yes
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
PERL_VER=${PERL_VER} \
PERL_ARCH=${PERL_ARCH} \
PERL5_MAN3=lib/perl5/${PERL_VER}/man/man3 \
SITE_PERL=${SITE_PERL_REL}
# handle perl5 specific manpages
.for sect in 3
.if defined(P5MAN${sect})
_MANPAGES+= ${P5MAN${sect}:S%^%${PREFIX}/lib/perl5/${PERL_VER}/man/man${sect}/%}
.endif
.endfor
MANDIRS+= ${PREFIX}/lib/perl5/${PERL_VER}
.if ${_USE_PERL5:Mmodbuild} || ${_USE_PERL5:Mmodbuildtiny}
_USE_PERL5+= configure
ALL_TARGET?= # empty
CONFIGURE_ARGS+=--install_path lib="${PREFIX}/${SITE_PERL_REL}" \
--install_path arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \
--install_path script="${PREFIX}/bin" \
--install_path bin="${PREFIX}/bin" \
--install_path libdoc="${MAN3PREFIX}/man/man3" \
--install_path bindoc="${MAN1PREFIX}/man/man1"
CONFIGURE_SCRIPT?= Build.PL
PL_BUILD?= Build
CONFIGURE_ARGS+=--destdir ${STAGEDIR}
DESTDIRNAME= --destdir
.if ${_USE_PERL5:Mmodbuild}
.if ${PORTNAME} != Module-Build
BUILD_DEPENDS+= p5-Module-Build>=0.4205:${PORTSDIR}/devel/p5-Module-Build
.endif
CONFIGURE_ARGS+=--create_packlist 0
.endif
.if ${_USE_PERL5:Mmodbuildtiny}
.if ${PORTNAME} != Module-Build-Tiny
BUILD_DEPENDS+= p5-Module-Build-Tiny>=0.036:${PORTSDIR}/devel/p5-Module-Build-Tiny
.endif
CONFIGURE_ARGS+=--create_packlist 1
.endif
.elif ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+=INSTALLDIRS="site"
.endif # modbuild
.if ${_USE_PERL5:Mconfigure}
_USE_PERL5+= build run
# Disable AutoInstall from attempting to install from CPAN directly in
# the case of missing dependencies. This causes the build to loop on
# the build cluster asking for interactive input.
CONFIGURE_ENV+= PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
.if defined(BATCH) && !defined(IS_INTERACTIVE)
CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES"
.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
.endif # configure
.if ${_USE_PERL5:Mextract}
EXTRACT_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mpatch}
PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mbuild}
BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mrun}
RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if ${_USE_PERL5:Mconfigure}
CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?= Makefile.PL
MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VER}
.undef HAS_CONFIGURE
.if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
@cd ${CONFIGURE_WRKSRC} && \
${SETENV} ${CONFIGURE_ENV} \
${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
.if !${_USE_PERL5:Mmodbuild*}
@cd ${CONFIGURE_WRKSRC} && \
${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
.endif # ! modbuild
.endif # !target(do-configure)
.endif # configure
.if ${_USE_PERL5:Mmodbuild*}
.if !target(do-build)
do-build:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${ALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-build)
.if !${USES:Mgmake}
.if !target(do-install)
do-install:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${INSTALL_TARGET} ${MAKE_ARGS})
.endif # !target(do-install)
.endif # ! USES=gmake
.endif # modbuild
.if ${USE_PERL5:Mconfigure} || ${USE_PERL5:Mmodbuildtiny} || ${USE_PERL5:Mfixpacklist}
fix-packlist::
-@[ -d ${STAGEDIR}${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}/auto ] && ${FIND} ${STAGEDIR}${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}/auto -name .packlist -exec ${SED} -i '' 's|^${STAGEDIR}||' '{}' \;
.endif
# Starting with perl 5.20, the empty bootstrap files are not installed any
# more. As we don't need them anyway, remove it altogether.
.if ${PERL_LEVEL} < 502000
fix-perl-bs:
-@${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete
.endif
.if !target(regression-test)
TEST_ARGS+= ${MAKE_ARGS}
TEST_ENV+= ${MAKE_ENV}
TEST_TARGET?= test
TEST_WRKSRC?= ${BUILD_WRKSRC}
.if !target(test)
test: regression-test
.endif # test
regression-test: build
.if ${USE_PERL5:Mmodbuild*}
-cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${PERL5} ${PL_BUILD} ${TEST_TARGET} ${TEST_ARGS}
.elif ${USE_PERL5:Mconfigure}
-cd ${TEST_WRKSRC}/ && ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${TEST_ARGS} ${TEST_TARGET}
.endif # USE_PERL5:Mmodbuild*
.endif # regression-test
.endif # defined(_POSTMKINCLUDED)
Reference in a new issue View git blame Copy permalink