kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/sysutils/condor/files/condor_config.in
Ruslan Makhmatkhanov b7504b26ff - update to 7.8.7 
PR:		173246
Submitted by:	Jason Bacon <jwbacon@tds.net> (maintainer)
Submitted by:   nwhitehorn (some fixes to the port)
2013-01-10 19:01:39 +00:00

2583 lines
110 KiB
Text
Raw Blame History

######################################################################
##
## condor_config
##
## This is the global configuration file for condor. Any settings
## made here may potentially be overridden in the local configuration
## file. KEEP THAT IN MIND! To double-check that a variable is
## getting set from the configuration file that you expect, use
## condor_config_val -v <variable name>
##
## The file is divided into four main parts:
## Part 1: Settings you likely want to customize
## Part 2: Settings you may want to customize
## Part 3: Settings that control the policy of when condor will
## start and stop jobs on your machines
## Part 4: Settings you should probably leave alone (unless you
## know what you're doing)
##
## Please read the INSTALL file (or the Install chapter in the
## Condor Administrator's Manual) for detailed explanations of the
## various settings in here and possible ways to configure your
## pool.
##
## Unless otherwise specified, settings that are commented out show
## the defaults that are used if you don't define a value. Settings
## that are defined here MUST BE DEFINED since they have no default
## value.
##
## Unless otherwise indicated, all settings which specify a time are
## defined in seconds.
##
######################################################################
######################################################################
######################################################################
##
## ###### #
## # # ## ##### ##### ##
## # # # # # # # # #
## ###### # # # # # #
## # ###### ##### # #
## # # # # # # #
## # # # # # # #####
##
## Part 1: Settings you likely want to customize:
######################################################################
######################################################################
## What machine is your central manager?
CONDOR_HOST = $(FULL_HOSTNAME)
##--------------------------------------------------------------------
## Pathnames:
##--------------------------------------------------------------------
## Where have you installed the bin, sbin and lib condor directories?
RELEASE_DIR = %%PREFIX%%
## Where is the local condor directory for each host?
## This is where the local config file(s), logs and
## spool/execute directories are located. Should be a large
## partition if jobs may produce a lot of output.
LOCAL_DIR = $(TILDE)
## Where is the machine-specific local config file for each host?
LOCAL_CONFIG_FILE = $(RELEASE_DIR)/etc/condor_config.local
## Where are optional machine-specific local config files located?
## Config files are included in lexicographic order.
LOCAL_CONFIG_DIR = $(LOCAL_DIR)/config
## Blacklist for file processing in the LOCAL_CONFIG_DIR
## LOCAL_CONFIG_DIR_EXCLUDE_REGEXP = ^((\..*)|(.*~)|(#.*)|(.*\.rpmsave)|(.*\.rpmnew))$
## If the local config file is not present, is it an error?
## WARNING: This is a potential security issue.
## If not specificed, the default is True
#REQUIRE_LOCAL_CONFIG_FILE = TRUE
##--------------------------------------------------------------------
## Mail parameters:
##--------------------------------------------------------------------
## When something goes wrong with condor at your site, who should get
## the email?
CONDOR_ADMIN = root@localhost
## Full path to a mail delivery program that understands that "-s"
## means you want to specify a subject:
MAIL = /usr/bin/mail
##--------------------------------------------------------------------
## Network domain parameters:
##--------------------------------------------------------------------
## Internet domain of machines sharing a common UID space. If your
## machines don't share a common UID space, set it to
## UID_DOMAIN = $(FULL_HOSTNAME)
## to specify that each machine has its own UID space.
UID_DOMAIN = $(FULL_HOSTNAME)
## Internet domain of machines sharing a common file system.
## If your machines don't use a network file system, set it to
## FILESYSTEM_DOMAIN = $(FULL_HOSTNAME)
## to specify that each machine has its own file system.
FILESYSTEM_DOMAIN = $(FULL_HOSTNAME)
## This macro is used to specify a short description of your pool.
## It should be about 20 characters long. For example, the name of
## the UW-Madison Computer Science Condor Pool is ``UW-Madison CS''.
COLLECTOR_NAME = My Pool - $(CONDOR_HOST)
######################################################################
######################################################################
##
## ###### #####
## # # ## ##### ##### # #
## # # # # # # # #
## ###### # # # # # #####
## # ###### ##### # #
## # # # # # # #
## # # # # # # #######
##
## Part 2: Settings you may want to customize:
## (it is generally safe to leave these untouched)
######################################################################
######################################################################
##
## The user/group ID <uid>.<gid> of the "Condor" user.
## (this can also be specified in the environment)
## Note: the CONDOR_IDS setting is ignored on Win32 platforms
CONDOR_IDS=0.0
##--------------------------------------------------------------------
## Flocking: Submitting jobs to more than one pool
##--------------------------------------------------------------------
## Flocking allows you to run your jobs in other pools, or lets
## others run jobs in your pool.
##
## To let others flock to you, define FLOCK_FROM.
##
## To flock to others, define FLOCK_TO.
## FLOCK_FROM defines the machines where you would like to grant
## people access to your pool via flocking. (i.e. you are granting
## access to these machines to join your pool).
FLOCK_FROM =
## An example of this is:
#FLOCK_FROM = somehost.friendly.domain, anotherhost.friendly.domain
## FLOCK_TO defines the central managers of the pools that you want
## to flock to. (i.e. you are specifying the machines that you
## want your jobs to be negotiated at -- thereby specifying the
## pools they will run in.)
FLOCK_TO =
## An example of this is:
#FLOCK_TO = central_manager.friendly.domain, condor.cs.wisc.edu
## FLOCK_COLLECTOR_HOSTS should almost always be the same as
## FLOCK_NEGOTIATOR_HOSTS (as shown below). The only reason it would be
## different is if the collector and negotiator in the pool that you are
## flocking too are running on different machines (not recommended).
## The collectors must be specified in the same corresponding order as
## the FLOCK_NEGOTIATOR_HOSTS list.
FLOCK_NEGOTIATOR_HOSTS = $(FLOCK_TO)
FLOCK_COLLECTOR_HOSTS = $(FLOCK_TO)
## An example of having the negotiator and the collector on different
## machines is:
#FLOCK_NEGOTIATOR_HOSTS = condor.cs.wisc.edu, condor-negotiator.friendly.domain
#FLOCK_COLLECTOR_HOSTS = condor.cs.wisc.edu, condor-collector.friendly.domain
##--------------------------------------------------------------------
## Host/IP access levels
##--------------------------------------------------------------------
## Please see the administrator's manual for details on these
## settings, what they're for, and how to use them.
## What machines have administrative rights for your pool? This
## defaults to your central manager. You should set it to the
## machine(s) where whoever is the condor administrator(s) works
## (assuming you trust all the users who log into that/those
## machine(s), since this is machine-wide access you're granting).
ALLOW_ADMINISTRATOR = $(CONDOR_HOST)
## If there are no machines that should have administrative access
## to your pool (for example, there's no machine where only trusted
## users have accounts), you can uncomment this setting.
## Unfortunately, this will mean that administering your pool will
## be more difficult.
#DENY_ADMINISTRATOR = *
## What machines should have "owner" access to your machines, meaning
## they can issue commands that a machine owner should be able to
## issue to their own machine (like condor_vacate). This defaults to
## machines with administrator access, and the local machine. This
## is probably what you want.
ALLOW_OWNER = $(FULL_HOSTNAME), $(ALLOW_ADMINISTRATOR)
## Read access. Machines listed as allow (and/or not listed as deny)
## can view the status of your pool, but cannot join your pool
## or run jobs.
## NOTE: By default, without these entries customized, you
## are granting read access to the whole world. You may want to
## restrict that to hosts in your domain. If possible, please also
## grant read access to "*.cs.wisc.edu", so the Condor developers
## will be able to view the status of your pool and more easily help
## you install, configure or debug your Condor installation.
## It is important to have this defined.
ALLOW_READ = *.your.domain
#ALLOW_READ = *.your.domain, *.cs.wisc.edu
#DENY_READ = *.bad.subnet, bad-machine.your.domain, 144.77.88.*
## Write access. Machines listed here can join your pool, submit
## jobs, etc. Note: Any machine which has WRITE access must
## also be granted READ access. Granting WRITE access below does
## not also automatically grant READ access; you must change
## ALLOW_READ above as well.
##
## You must set this to something else before Condor will run.
## This most simple option is:
## ALLOW_WRITE = *
## but note that this will allow anyone to submit jobs or add
## machines to your pool and is a serious security risk.
ALLOW_WRITE = *.your.domain
#ALLOW_WRITE = $(FULL_HOSTNAME), $(IP_ADDRESS)
#ALLOW_WRITE = *.your.domain, your-friend's-machine.other.domain
#DENY_WRITE = bad-machine.your.domain
## Are you upgrading to a new version of Condor and confused about
## why the above ALLOW_WRITE setting is causing Condor to refuse to
## start up? If you are upgrading from a configuration that uses
## HOSTALLOW/HOSTDENY instead of ALLOW/DENY we recommend that you
## convert all uses of the former to the latter. The syntax of the
## authorization settings is identical. They both support
## unauthenticated IP-based authorization as well as authenticated
## user-based authorization. To avoid confusion, the use of
## HOSTALLOW/HOSTDENY is discouraged. Support for it may be removed
## in the future.
## Negotiator access. Machines listed here are trusted central
## managers. You should normally not have to change this.
ALLOW_NEGOTIATOR = $(CONDOR_HOST)
## Now, with flocking we need to let the SCHEDD trust the other
## negotiators we are flocking with as well. You should normally
## not have to change this either.
ALLOW_NEGOTIATOR_SCHEDD = $(CONDOR_HOST), $(FLOCK_NEGOTIATOR_HOSTS)
## Config access. Machines listed here can use the condor_config_val
## tool to modify all daemon configurations. This level of host-wide
## access should only be granted with extreme caution. By default,
## config access is denied from all hosts.
#ALLOW_CONFIG = trusted-host.your.domain
## Flocking Configs. These are the real things that Condor looks at,
## but we set them from the FLOCK_FROM/TO macros above. It is safe
## to leave these unchanged.
ALLOW_WRITE_COLLECTOR = $(ALLOW_WRITE), $(FLOCK_FROM)
ALLOW_WRITE_STARTD = $(ALLOW_WRITE), $(FLOCK_FROM)
ALLOW_READ_COLLECTOR = $(ALLOW_READ), $(FLOCK_FROM)
ALLOW_READ_STARTD = $(ALLOW_READ), $(FLOCK_FROM)
##--------------------------------------------------------------------
## Security parameters for setting configuration values remotely:
##--------------------------------------------------------------------
## These parameters define the list of attributes that can be set
## remotely with condor_config_val for the security access levels
## defined above (for example, WRITE, ADMINISTRATOR, CONFIG, etc).
## Please see the administrator's manual for futher details on these
## settings, what they're for, and how to use them. There are no
## default values for any of these settings. If they are not
## defined, no attributes can be set with condor_config_val.
## Do you want to allow condor_config_val -rset to work at all?
## This feature is disabled by default, so to enable, you must
## uncomment the following setting and change the value to "True".
## Note: changing this requires a restart not just a reconfig.
#ENABLE_RUNTIME_CONFIG = False
## Do you want to allow condor_config_val -set to work at all?
## This feature is disabled by default, so to enable, you must
## uncomment the following setting and change the value to "True".
## Note: changing this requires a restart not just a reconfig.
#ENABLE_PERSISTENT_CONFIG = False
## Directory where daemons should write persistent config files (used
## to support condor_config_val -set). This directory should *ONLY*
## be writable by root (or the user the Condor daemons are running as
## if non-root). There is no default, administrators must define this.
## Note: changing this requires a restart not just a reconfig.
#PERSISTENT_CONFIG_DIR = /full/path/to/root-only/local/directory
## Attributes that can be set by hosts with "CONFIG" permission (as
## defined with ALLOW_CONFIG and DENY_CONFIG above).
## The commented-out value here was the default behavior of Condor
## prior to version 6.3.3. If you don't need this behavior, you
## should leave this commented out.
#SETTABLE_ATTRS_CONFIG = *
## Attributes that can be set by hosts with "ADMINISTRATOR"
## permission (as defined above)
#SETTABLE_ATTRS_ADMINISTRATOR = *_DEBUG, MAX_*_LOG
## Attributes that can be set by hosts with "OWNER" permission (as
## defined above) NOTE: any Condor job running on a given host will
## have OWNER permission on that host by default. If you grant this
## kind of access, Condor jobs will be able to modify any attributes
## you list below on the machine where they are running. This has
## obvious security implications, so only grant this kind of
## permission for custom attributes that you define for your own use
## at your pool (custom attributes about your machines that are
## published with the STARTD_ATTRS setting, for example).
#SETTABLE_ATTRS_OWNER = your_custom_attribute, another_custom_attr
## You can also define daemon-specific versions of each of these
## settings. For example, to define settings that can only be
## changed in the condor_startd's configuration by hosts with OWNER
## permission, you would use:
#STARTD_SETTABLE_ATTRS_OWNER = your_custom_attribute_name
##--------------------------------------------------------------------
## Network filesystem parameters:
##--------------------------------------------------------------------
## Do you want to use NFS for file access instead of remote system
## calls?
#USE_NFS = False
## Do you want to use AFS for file access instead of remote system
## calls?
#USE_AFS = False
##--------------------------------------------------------------------
## Checkpoint server:
##--------------------------------------------------------------------
## Do you want to use a checkpoint server if one is available? If a
## checkpoint server isn't available or USE_CKPT_SERVER is set to
## False, checkpoints will be written to the local SPOOL directory on
## the submission machine.
#USE_CKPT_SERVER = True
## What's the hostname of this machine's nearest checkpoint server?
#CKPT_SERVER_HOST = checkpoint-server-hostname.your.domain
## Do you want the starter on the execute machine to choose the
## checkpoint server? If False, the CKPT_SERVER_HOST set on
## the submit machine is used. Otherwise, the CKPT_SERVER_HOST set
## on the execute machine is used. The default is true.
#STARTER_CHOOSES_CKPT_SERVER = True
##--------------------------------------------------------------------
## Miscellaneous:
##--------------------------------------------------------------------
## Try to save this much swap space by not starting new shadows.
## Specified in megabytes.
#RESERVED_SWAP = 0
## What's the maximum number of jobs you want a single submit machine
## to spawn shadows for? The default is a function of $(DETECTED_MEMORY)
## and a guess at the number of ephemeral ports available.
## Example 1:
#MAX_JOBS_RUNNING = 10000
## Example 2:
## This is more complicated, but it produces the same limit as the default.
## First define some expressions to use in our calculation.
## Assume we can use up to 80% of memory and estimate shadow private data
## size of 800k.
#MAX_SHADOWS_MEM = ceiling($(DETECTED_MEMORY)*0.8*1024/800)
## Assume we can use ~21,000 ephemeral ports (avg ~2.1 per shadow).
## Under Linux, the range is set in /proc/sys/net/ipv4/ip_local_port_range.
#MAX_SHADOWS_PORTS = 10000
## Under windows, things are much less scalable, currently.
## Note that this can probably be safely increased a bit under 64-bit windows.
#MAX_SHADOWS_OPSYS = ifThenElse(regexp("WIN.*","$(OPSYS)"),200,100000)
## Now build up the expression for MAX_JOBS_RUNNING. This is complicated
## due to lack of a min() function.
#MAX_JOBS_RUNNING = $(MAX_SHADOWS_MEM)
#MAX_JOBS_RUNNING = \
# ifThenElse( $(MAX_SHADOWS_PORTS) < $(MAX_JOBS_RUNNING), \
# $(MAX_SHADOWS_PORTS), \
# $(MAX_JOBS_RUNNING) )
#MAX_JOBS_RUNNING = \
# ifThenElse( $(MAX_SHADOWS_OPSYS) < $(MAX_JOBS_RUNNING), \
# $(MAX_SHADOWS_OPSYS), \
# $(MAX_JOBS_RUNNING) )
## Maximum number of simultaneous downloads of output files from
## execute machines to the submit machine (limit applied per schedd).
## The value 0 means unlimited.
#MAX_CONCURRENT_DOWNLOADS = 10
## Maximum number of simultaneous uploads of input files from the
## submit machine to execute machines (limit applied per schedd).
## The value 0 means unlimited.
#MAX_CONCURRENT_UPLOADS = 10
## Condor needs to create a few lock files to synchronize access to
## various log files. Because of problems we've had with network
## filesystems and file locking over the years, we HIGHLY recommend
## that you put these lock files on a local partition on each
## machine. If you don't have your LOCAL_DIR on a local partition,
## be sure to change this entry. Whatever user (or group) condor is
## running as needs to have write access to this directory. If
## you're not running as root, this is whatever user you started up
## the condor_master as. If you are running as root, and there's a
## condor account, it's probably condor. Otherwise, it's whatever
## you've set in the CONDOR_IDS environment variable. See the Admin
## manual for details on this.
LOCK = $(LOG)
## If you don't use a fully qualified name in your /etc/hosts file
## (or NIS, etc.) for either your official hostname or as an alias,
## Condor wouldn't normally be able to use fully qualified names in
## places that it'd like to. You can set this parameter to the
## domain you'd like appended to your hostname, if changing your host
## information isn't a good option. This parameter must be set in
## the global config file (not the LOCAL_CONFIG_FILE from above).
#DEFAULT_DOMAIN_NAME = your.domain.name
## If you don't have DNS set up, Condor will normally fail in many
## places because it can't resolve hostnames to IP addresses and
## vice-versa. If you enable this option, Condor will use
## pseudo-hostnames constructed from a machine's IP address and the
## DEFAULT_DOMAIN_NAME. Both NO_DNS and DEFAULT_DOMAIN must be set in
## your top-level config file for this mode of operation to work
## properly.
#NO_DNS = True
## Condor can be told whether or not you want the Condor daemons to
## create a core file if something really bad happens. This just
## sets the resource limit for the size of a core file. By default,
## we don't do anything, and leave in place whatever limit was in
## effect when you started the Condor daemons. If this parameter is
## set and "True", we increase the limit to as large as it gets. If
## it's set to "False", we set the limit at 0 (which means that no
## core files are even created). Core files greatly help the Condor
## developers debug any problems you might be having.
#CREATE_CORE_FILES = True
## When Condor daemons detect a fatal internal exception, they
## normally log an error message and exit. If you have turned on
## CREATE_CORE_FILES, in some cases you may also want to turn on
## ABORT_ON_EXCEPTION so that core files are generated when an
## exception occurs. Set the following to True if that is what you
## want.
#ABORT_ON_EXCEPTION = False
## Condor Glidein downloads binaries from a remote server for the
## machines into which you're gliding. This saves you from manually
## downloading and installing binaries for every architecture you
## might want to glidein to. The default server is one maintained at
## The University of Wisconsin. If you don't want to use the UW
## server, you can set up your own and change the following to
## point to it, instead.
GLIDEIN_SERVER_URLS = \
http://www.cs.wisc.edu/condor/glidein/binaries
## List the sites you want to GlideIn to on the GLIDEIN_SITES. For example,
## if you'd like to GlideIn to some Alliance GiB resources,
## uncomment the line below.
## Make sure that $(GLIDEIN_SITES) is included in ALLOW_READ and
## ALLOW_WRITE, or else your GlideIns won't be able to join your pool.
## This is _NOT_ done for you by default, because it is an even better
## idea to use a strong security method (such as GSI) rather than
## host-based security for authorizing glideins.
#GLIDEIN_SITES = *.ncsa.uiuc.edu, *.cs.wisc.edu, *.mcs.anl.gov
#GLIDEIN_SITES =
## If your site needs to use UID_DOMAIN settings (defined above) that
## are not real Internet domains that match the hostnames, you can
## tell Condor to trust whatever UID_DOMAIN a submit machine gives to
## the execute machine and just make sure the two strings match. The
## default for this setting is False, since it is more secure this
## way.
#TRUST_UID_DOMAIN = False
## If you would like to be informed in near real-time via condor_q when
## a vanilla/standard/java job is in a suspension state, set this attribute to
## TRUE. However, this real-time update of the condor_schedd by the shadows
## could cause performance issues if there are thousands of concurrently
## running vanilla/standard/java jobs under a single condor_schedd and they
## are allowed to suspend and resume.
#REAL_TIME_JOB_SUSPEND_UPDATES = False
## A standard universe job can perform arbitrary shell calls via the
## libc 'system()' function. This function call is routed back to the shadow
## which performs the actual system() invocation in the initialdir of the
## running program and as the user who submitted the job. However, since the
## user job can request ARBITRARY shell commands to be run by the shadow, this
## is a generally unsafe practice. This should only be made available if it is
## actually needed. If this attribute is not defined, then it is the same as
## it being defined to False. Set it to True to allow the shadow to execute
## arbitrary shell code from the user job.
#SHADOW_ALLOW_UNSAFE_REMOTE_EXEC = False
## KEEP_OUTPUT_SANDBOX is an optional feature to tell Condor-G to not
## remove the job spool when the job leaves the queue. To use, just
## set to TRUE. Since you will be operating Condor-G in this manner,
## you may want to put leave_in_queue = false in your job submit
## description files, to tell Condor-G to simply remove the job from
## the queue immediately when the job completes (since the output files
## will stick around no matter what).
#KEEP_OUTPUT_SANDBOX = False
## This setting tells the negotiator to ignore user priorities. This
## avoids problems where jobs from different users won't run when using
## condor_advertise instead of a full-blown startd (some of the user
## priority system in Condor relies on information from the startd --
## we will remove this reliance when we support the user priority
## system for grid sites in the negotiator; for now, this setting will
## just disable it).
#NEGOTIATOR_IGNORE_USER_PRIORITIES = False
## This is a list of libraries containing ClassAd plug-in functions.
#CLASSAD_USER_LIBS =
## This setting tells Condor whether to delegate or copy GSI X509
## credentials when sending them over the wire between daemons.
## Delegation can take up to a second, which is very slow when
## submitting a large number of jobs. Copying exposes the credential
## to third parties if Condor isn't set to encrypt communications.
## By default, Condor will delegate rather than copy.
#DELEGATE_JOB_GSI_CREDENTIALS = True
## This setting controls whether Condor delegates a full or limited
## X509 credential for jobs. Currently, this only affects grid-type
## gt2 grid universe jobs. The default is False.
#DELEGATE_FULL_JOB_GSI_CREDENTIALS = False
## This setting controls the default behaviour for the spooling of files
## into, or out of, the Condor system by such tools as condor_submit
## and condor_transfer_data. Here is the list of valid settings for this
## parameter and what they mean:
##
## stm_use_schedd_only
## Ask the condor_schedd to solely store/retreive the sandbox
##
## stm_use_transferd
## Ask the condor_schedd for a location of a condor_transferd, then
## store/retreive the sandbox from the transferd itself.
##
## The allowed values are case insensitive.
## The default of this parameter if not specified is: stm_use_schedd_only
#SANDBOX_TRANSFER_METHOD = stm_use_schedd_only
## This setting specifies an IP address that depends on the setting of
## BIND_ALL_INTERFACES. If BIND_ALL_INTERFACES is True (the default), then
## this variable controls what IP address will be advertised as the public
## address of the daemon. If BIND_ALL_INTERFACES is False, then this variable
## specifies which IP address to bind network sockets to. If
## BIND_ALL_INTERFACES is False and NETWORK_INTERFACE is not defined, Condor
## chooses a network interface automatically. It tries to choose a public
## interface if one is available. If it cannot decide which of two interfaces
## to choose from, it will pick the first one.
#NETWORK_INTERFACE =
##--------------------------------------------------------------------
## Settings that control the daemon's debugging output:
##--------------------------------------------------------------------
##
## The flags given in ALL_DEBUG are shared between all daemons.
##
ALL_DEBUG =
MAX_COLLECTOR_LOG = 1000000
COLLECTOR_DEBUG =
MAX_KBDD_LOG = 1000000
KBDD_DEBUG =
MAX_NEGOTIATOR_LOG = 1000000
NEGOTIATOR_DEBUG = D_MATCH
MAX_NEGOTIATOR_MATCH_LOG = 1000000
MAX_SCHEDD_LOG = 1000000
SCHEDD_DEBUG = D_PID
MAX_SHADOW_LOG = 1000000
SHADOW_DEBUG =
MAX_STARTD_LOG = 1000000
STARTD_DEBUG =
MAX_STARTER_LOG = 1000000
MAX_MASTER_LOG = 1000000
MASTER_DEBUG =
## When the master starts up, should it truncate it's log file?
#TRUNC_MASTER_LOG_ON_OPEN = False
MAX_JOB_ROUTER_LOG = 1000000
JOB_ROUTER_DEBUG =
MAX_ROOSTER_LOG = 1000000
ROOSTER_DEBUG =
MAX_SHARED_PORT_LOG = 1000000
SHARED_PORT_DEBUG =
MAX_HDFS_LOG = 1000000
HDFS_DEBUG =
# High Availability Logs
MAX_HAD_LOG = 1000000
HAD_DEBUG =
MAX_REPLICATION_LOG = 1000000
REPLICATION_DEBUG =
MAX_TRANSFERER_LOG = 1000000
TRANSFERER_DEBUG =
## The daemons touch their log file periodically, even when they have
## nothing to write. When a daemon starts up, it prints the last time
## the log file was modified. This lets you estimate when a previous
## instance of a daemon stopped running. This paramete controls how often
## the daemons touch the file (in seconds).
#TOUCH_LOG_INTERVAL = 60
######################################################################
######################################################################
##
## ###### #####
## # # ## ##### ##### # #
## # # # # # # # #
## ###### # # # # # #####
## # ###### ##### # #
## # # # # # # # #
## # # # # # # #####
##
## Part 3: Settings control the policy for running, stopping, and
## periodically checkpointing condor jobs:
######################################################################
######################################################################
## This section contains macros are here to help write legible
## expressions:
MINUTE = 60
HOUR = (60 * $(MINUTE))
StateTimer = (time() - EnteredCurrentState)
ActivityTimer = (time() - EnteredCurrentActivity)
ActivationTimer = ifThenElse(JobStart =!= UNDEFINED, (time() - JobStart), 0)
LastCkpt = (time() - LastPeriodicCheckpoint)
## The JobUniverse attribute is just an int. These macros can be
## used to specify the universe in a human-readable way:
STANDARD = 1
VANILLA = 5
MPI = 8
VM = 13
IsMPI = (TARGET.JobUniverse == $(MPI))
IsVanilla = (TARGET.JobUniverse == $(VANILLA))
IsStandard = (TARGET.JobUniverse == $(STANDARD))
IsVM = (TARGET.JobUniverse == $(VM))
NonCondorLoadAvg = (LoadAvg - CondorLoadAvg)
BackgroundLoad = 0.3
HighLoad = 0.5
StartIdleTime = 15 * $(MINUTE)
ContinueIdleTime = 5 * $(MINUTE)
MaxSuspendTime = 10 * $(MINUTE)
MaxVacateTime = 10 * $(MINUTE)
KeyboardBusy = (KeyboardIdle < $(MINUTE))
ConsoleBusy = (ConsoleIdle < $(MINUTE))
CPUIdle = ($(NonCondorLoadAvg) <= $(BackgroundLoad))
CPUBusy = ($(NonCondorLoadAvg) >= $(HighLoad))
KeyboardNotBusy = ($(KeyboardBusy) == False)
BigJob = (TARGET.ImageSize >= (50 * 1024))
MediumJob = (TARGET.ImageSize >= (15 * 1024) && TARGET.ImageSize < (50 * 1024))
SmallJob = (TARGET.ImageSize < (15 * 1024))
JustCPU = ($(CPUBusy) && ($(KeyboardBusy) == False))
MachineBusy = ($(CPUBusy) || $(KeyboardBusy))
## The RANK expression controls which jobs this machine prefers to
## run over others. Some examples from the manual include:
## RANK = TARGET.ImageSize
## RANK = (Owner == "coltrane") + (Owner == "tyner") \
## + ((Owner == "garrison") * 10) + (Owner == "jones")
## By default, RANK is always 0, meaning that all jobs have an equal
## ranking.
#RANK = 0
#####################################################################
## This where you choose the configuration that you would like to
## use. It has no defaults so it must be defined. We start this
## file off with the UWCS_* policy.
######################################################################
## Also here is what is referred to as the TESTINGMODE_*, which is
## a quick hardwired way to test Condor with a simple no-preemption policy.
## Replace UWCS_* with TESTINGMODE_* if you wish to do testing mode.
## For example:
## WANT_SUSPEND = $(UWCS_WANT_SUSPEND)
## becomes
## WANT_SUSPEND = $(TESTINGMODE_WANT_SUSPEND)
# When should we only consider SUSPEND instead of PREEMPT?
WANT_SUSPEND = $(UWCS_WANT_SUSPEND)
# When should we preempt gracefully instead of hard-killing?
WANT_VACATE = $(UWCS_WANT_VACATE)
## When is this machine willing to start a job?
START = $(UWCS_START)
## When should a local universe job be allowed to start?
#START_LOCAL_UNIVERSE = TotalLocalJobsRunning < 200
## When should a scheduler universe job be allowed to start?
#START_SCHEDULER_UNIVERSE = TotalSchedulerJobsRunning < 200
## When to suspend a job?
SUSPEND = $(UWCS_SUSPEND)
## When to resume a suspended job?
CONTINUE = $(UWCS_CONTINUE)
## When to nicely stop a job?
## (as opposed to killing it instantaneously)
PREEMPT = $(UWCS_PREEMPT)
## When to instantaneously kill a preempting job
## (e.g. if a job is in the pre-empting stage for too long)
KILL = $(UWCS_KILL)
PERIODIC_CHECKPOINT = $(UWCS_PERIODIC_CHECKPOINT)
PREEMPTION_REQUIREMENTS = $(UWCS_PREEMPTION_REQUIREMENTS)
PREEMPTION_RANK = $(UWCS_PREEMPTION_RANK)
NEGOTIATOR_PRE_JOB_RANK = $(UWCS_NEGOTIATOR_PRE_JOB_RANK)
NEGOTIATOR_POST_JOB_RANK = $(UWCS_NEGOTIATOR_POST_JOB_RANK)
MaxJobRetirementTime = $(UWCS_MaxJobRetirementTime)
CLAIM_WORKLIFE = $(UWCS_CLAIM_WORKLIFE)
#####################################################################
## This is the UWisc - CS Department Configuration.
#####################################################################
# When should we only consider SUSPEND instead of PREEMPT?
# Only when SUSPEND is True and one of the following is also true:
# - the job is small
# - the keyboard is idle
# - it is a vanilla universe job
UWCS_WANT_SUSPEND = ( $(SmallJob) || $(KeyboardNotBusy) || $(IsVanilla) ) && \
( $(SUSPEND) )
# When should we preempt gracefully instead of hard-killing?
UWCS_WANT_VACATE = ( $(ActivationTimer) > 10 * $(MINUTE) || $(IsVanilla) )
# Only start jobs if:
# 1) the keyboard has been idle long enough, AND
# 2) the load average is low enough OR the machine is currently
# running a Condor job
# (NOTE: Condor will only run 1 job at a time on a given resource.
# The reasons Condor might consider running a different job while
# already running one are machine Rank (defined above), and user
# priorities.)
UWCS_START = ( (KeyboardIdle > $(StartIdleTime)) \
&& ( $(CPUIdle) || \
(State != "Unclaimed" && State != "Owner")) )
# Suspend jobs if:
# 1) the keyboard has been touched, OR
# 2a) The cpu has been busy for more than 2 minutes, AND
# 2b) the job has been running for more than 90 seconds
UWCS_SUSPEND = ( $(KeyboardBusy) || \
( (CpuBusyTime > 2 * $(MINUTE)) \
&& $(ActivationTimer) > 90 ) )
# Continue jobs if:
# 1) the cpu is idle, AND
# 2) we've been suspended more than 10 seconds, AND
# 3) the keyboard hasn't been touched in a while
UWCS_CONTINUE = ( $(CPUIdle) && ($(ActivityTimer) > 10) \
&& (KeyboardIdle > $(ContinueIdleTime)) )
# Preempt jobs if:
# 1) The job is suspended and has been suspended longer than we want
# 2) OR, we don't want to suspend this job, but the conditions to
# suspend jobs have been met (someone is using the machine)
UWCS_PREEMPT = ( ((Activity == "Suspended") && \
($(ActivityTimer) > $(MaxSuspendTime))) \
|| (SUSPEND && (WANT_SUSPEND == False)) )
# Maximum time (in seconds) to wait for a job to finish before kicking
# it off (due to PREEMPT, a higher priority claim, or the startd
# gracefully shutting down). This is computed from the time the job
# was started, minus any suspension time. Once the retirement time runs
# out, the usual preemption process will take place. The job may
# self-limit the retirement time to _less_ than what is given here.
# By default, nice user jobs and standard universe jobs set their
# MaxJobRetirementTime to 0, so they will not wait in retirement.
UWCS_MaxJobRetirementTime = 0
## If you completely disable preemption of claims to machines, you
## should consider limiting the timespan over which new jobs will be
## accepted on the same claim. See the manual section on disabling
## preemption for a comprehensive discussion. Since this example
## configuration does not disable preemption of claims, we leave
## CLAIM_WORKLIFE undefined (infinite).
#UWCS_CLAIM_WORKLIFE = 1200
# Kill jobs if they have taken too long to vacate gracefully
UWCS_KILL = $(ActivityTimer) > $(MaxVacateTime)
## Only define vanilla versions of these if you want to make them
## different from the above settings.
#SUSPEND_VANILLA = ( $(KeyboardBusy) || \
# ((CpuBusyTime > 2 * $(MINUTE)) && $(ActivationTimer) > 90) )
#CONTINUE_VANILLA = ( $(CPUIdle) && ($(ActivityTimer) > 10) \
# && (KeyboardIdle > $(ContinueIdleTime)) )
#PREEMPT_VANILLA = ( ((Activity == "Suspended") && \
# ($(ActivityTimer) > $(MaxSuspendTime))) \
# || (SUSPEND_VANILLA && (WANT_SUSPEND == False)) )
#KILL_VANILLA = $(ActivityTimer) > $(MaxVacateTime)
## Checkpoint every 3 hours on average, with a +-30 minute random
## factor to avoid having many jobs hit the checkpoint server at
## the same time.
UWCS_PERIODIC_CHECKPOINT = $(LastCkpt) > (3 * $(HOUR) + \
$RANDOM_INTEGER(-30,30,1) * $(MINUTE) )
## You might want to checkpoint a little less often. A good
## example of this is below. For jobs smaller than 60 megabytes, we
## periodic checkpoint every 6 hours. For larger jobs, we only
## checkpoint every 12 hours.
#UWCS_PERIODIC_CHECKPOINT = \
# ( (TARGET.ImageSize < 60000) && \
# ($(LastCkpt) > (6 * $(HOUR) + $RANDOM_INTEGER(-30,30,1))) ) || \
# ( $(LastCkpt) > (12 * $(HOUR) + $RANDOM_INTEGER(-30,30,1)) )
## The rank expressions used by the negotiator are configured below.
## This is the order in which ranks are applied by the negotiator:
## 1. NEGOTIATOR_PRE_JOB_RANK
## 2. rank in job ClassAd
## 3. NEGOTIATOR_POST_JOB_RANK
## 4. cause of preemption (0=user priority,1=startd rank,2=no preemption)
## 5. PREEMPTION_RANK
## The NEGOTIATOR_PRE_JOB_RANK expression overrides all other ranks
## that are used to pick a match from the set of possibilities.
## The following expression matches jobs to unclaimed resources
## whenever possible, regardless of the job-supplied rank.
UWCS_NEGOTIATOR_PRE_JOB_RANK = RemoteOwner =?= UNDEFINED
## The NEGOTIATOR_POST_JOB_RANK expression chooses between
## resources that are equally preferred by the job.
## The following example expression steers jobs toward
## faster machines and tends to fill a cluster of multi-processors
## breadth-first instead of depth-first. It also prefers online
## machines over offline (hibernating) ones. In this example,
## the expression is chosen to have no effect when preemption
## would take place, allowing control to pass on to
## PREEMPTION_RANK.
UWCS_NEGOTIATOR_POST_JOB_RANK = \
(RemoteOwner =?= UNDEFINED) * (KFlops - SlotID - 1.0e10*(Offline=?=True))
## The negotiator will not preempt a job running on a given machine
## unless the PREEMPTION_REQUIREMENTS expression evaluates to true
## and the owner of the idle job has a better priority than the owner
## of the running job. This expression defaults to true.
UWCS_PREEMPTION_REQUIREMENTS = ( $(StateTimer) > (1 * $(HOUR)) && \
RemoteUserPrio > TARGET.SubmitterUserPrio * 1.2 ) || (MY.NiceUser == True)
## The PREEMPTION_RANK expression is used in a case where preemption
## is the only option and all other negotiation ranks are equal. For
## example, if the job has no preference, it is usually preferable to
## preempt a job with a small ImageSize instead of a job with a large
## ImageSize. The default is to rank all preemptable matches the
## same. However, the negotiator will always prefer to match the job
## with an idle machine over a preemptable machine, if all other
## negotiation ranks are equal.
UWCS_PREEMPTION_RANK = (RemoteUserPrio * 1000000) - TARGET.ImageSize
#####################################################################
## This is a Configuration that will cause your Condor jobs to
## always run. This is intended for testing only.
######################################################################
## This mode will cause your jobs to start on a machine an will let
## them run to completion. Condor will ignore all of what is going
## on in the machine (load average, keyboard activity, etc.)
TESTINGMODE_WANT_SUSPEND = False
TESTINGMODE_WANT_VACATE = False
TESTINGMODE_START = True
TESTINGMODE_SUSPEND = False
TESTINGMODE_CONTINUE = True
TESTINGMODE_PREEMPT = False
TESTINGMODE_KILL = False
TESTINGMODE_PERIODIC_CHECKPOINT = False
TESTINGMODE_PREEMPTION_REQUIREMENTS = False
TESTINGMODE_PREEMPTION_RANK = 0
# Prevent machine claims from being reused indefinitely, since
# preemption of claims is disabled in the TESTINGMODE configuration.
TESTINGMODE_CLAIM_WORKLIFE = 1200
######################################################################
######################################################################
##
## ###### #
## # # ## ##### ##### # #
## # # # # # # # # #
## ###### # # # # # # #
## # ###### ##### # #######
## # # # # # # #
## # # # # # # #
##
## Part 4: Settings you should probably leave alone:
## (unless you know what you're doing)
######################################################################
######################################################################
######################################################################
## Daemon-wide settings:
######################################################################
## Pathnames
LOG = $(LOCAL_DIR)/log
SPOOL = $(LOCAL_DIR)/spool
EXECUTE = $(LOCAL_DIR)/execute
BIN = $(RELEASE_DIR)/bin
LIB = $(RELEASE_DIR)/lib
INCLUDE = $(RELEASE_DIR)/include
SBIN = $(RELEASE_DIR)/sbin
LIBEXEC = $(RELEASE_DIR)/libexec
## If you leave HISTORY undefined (comment it out), no history file
## will be created.
HISTORY = $(SPOOL)/history
## Log files
COLLECTOR_LOG = $(LOG)/CollectorLog
KBDD_LOG = $(LOG)/KbdLog
MASTER_LOG = $(LOG)/MasterLog
NEGOTIATOR_LOG = $(LOG)/NegotiatorLog
NEGOTIATOR_MATCH_LOG = $(LOG)/MatchLog
SCHEDD_LOG = $(LOG)/SchedLog
SHADOW_LOG = $(LOG)/ShadowLog
STARTD_LOG = $(LOG)/StartLog
STARTER_LOG = $(LOG)/StarterLog
JOB_ROUTER_LOG = $(LOG)/JobRouterLog
ROOSTER_LOG = $(LOG)/RoosterLog
SHARED_PORT_LOG = $(LOG)/SharedPortLog
# High Availability Logs
HAD_LOG = $(LOG)/HADLog
REPLICATION_LOG = $(LOG)/ReplicationLog
TRANSFERER_LOG = $(LOG)/TransfererLog
HDFS_LOG = $(LOG)/HDFSLog
## Lock files
SHADOW_LOCK = $(LOCK)/ShadowLock
## This setting controls how often any lock files currently in use have their
## timestamp updated. Updating the timestamp prevents administrative programs
## like 'tmpwatch' from deleting long lived lock files. The parameter is
## an integer in seconds with a minimum of 60 seconds. The default if not
## specified is 28800 seconds, or 8 hours.
## This attribute only takes effect on restart of the daemons or at the next
## update time.
# LOCK_FILE_UPDATE_INTERVAL = 28800
## This setting primarily allows you to change the port that the
## collector is listening on. By default, the collector uses port
## 9618, but you can set the port with a ":port", such as:
## COLLECTOR_HOST = $(CONDOR_HOST):1234
COLLECTOR_HOST = $(CONDOR_HOST)
## The NEGOTIATOR_HOST parameter has been deprecated. The port where
## the negotiator is listening is now dynamically allocated and the IP
## and port are now obtained from the collector, just like all the
## other daemons. However, if your pool contains any machines that
## are running version 6.7.3 or earlier, you can uncomment this
## setting to go back to the old fixed-port (9614) for the negotiator.
#NEGOTIATOR_HOST = $(CONDOR_HOST)
## How long are you willing to let daemons try their graceful
## shutdown methods before they do a hard shutdown? (30 minutes)
#SHUTDOWN_GRACEFUL_TIMEOUT = 1800
## How much disk space would you like reserved from Condor? In
## places where Condor is computing the free disk space on various
## partitions, it subtracts the amount it really finds by this
## many megabytes. (If undefined, defaults to 0).
RESERVED_DISK = 5
## If your machine is running AFS and the AFS cache lives on the same
## partition as the other Condor directories, and you want Condor to
## reserve the space that your AFS cache is configured to use, set
## this to true.
#RESERVE_AFS_CACHE = False
## By default, if a user does not specify "notify_user" in the submit
## description file, any email Condor sends about that job will go to
## "username@UID_DOMAIN". If your machines all share a common UID
## domain (so that you would set UID_DOMAIN to be the same across all
## machines in your pool), *BUT* email to user@UID_DOMAIN is *NOT*
## the right place for Condor to send email for your site, you can
## define the default domain to use for email. A common example
## would be to set EMAIL_DOMAIN to the fully qualified hostname of
## each machine in your pool, so users submitting jobs from a
## specific machine would get email sent to user@machine.your.domain,
## instead of user@your.domain. In general, you should leave this
## setting commented out unless two things are true: 1) UID_DOMAIN is
## set to your domain, not $(FULL_HOSTNAME), and 2) email to
## user@UID_DOMAIN won't work.
#EMAIL_DOMAIN = $(FULL_HOSTNAME)
## Should Condor daemons create a UDP command socket (for incomming
## UDP-based commands) in addition to the TCP command socket? By
## default, classified ad updates sent to the collector use UDP, in
## addition to some keep alive messages and other non-essential
## communication. However, in certain situations, it might be
## desirable to disable the UDP command port (for example, to reduce
## the number of ports represented by a GCB broker, etc). If not
## defined, the UDP command socket is enabled by default, and to
## modify this, you must restart your Condor daemons. Also, this
## setting must be defined machine-wide. For example, setting
## "STARTD.WANT_UDP_COMMAND_SOCKET = False" while the global setting
## is "True" will still result in the startd creating a UDP socket.
#WANT_UDP_COMMAND_SOCKET = True
## If your site needs to use TCP updates to the collector, instead of
## UDP, you can enable this feature. HOWEVER, WE DO NOT RECOMMEND
## THIS FOR MOST SITES! In general, the only sites that might want
## this feature are pools made up of machines connected via a
## wide-area network where UDP packets are frequently or always
## dropped. If you enable this feature, you *MUST* turn on the
## COLLECTOR_SOCKET_CACHE_SIZE setting at your collector, and each
## entry in the socket cache uses another file descriptor. If not
## defined, this feature is disabled by default.
#UPDATE_COLLECTOR_WITH_TCP = True
## HIGHPORT and LOWPORT let you set the range of ports that Condor
## will use. This may be useful if you are behind a firewall. By
## default, Condor uses port 9618 for the collector, 9614 for the
## negotiator, and system-assigned (apparently random) ports for
## everything else. HIGHPORT and LOWPORT only affect these
## system-assigned ports, but will restrict them to the range you
## specify here. If you want to change the well-known ports for the
## collector or negotiator, see COLLECTOR_HOST or NEGOTIATOR_HOST.
## Note that both LOWPORT and HIGHPORT must be at least 1024 if you
## are not starting your daemons as root. You may also specify
## different port ranges for incoming and outgoing connections by
## using IN_HIGHPORT/IN_LOWPORT and OUT_HIGHPORT/OUT_LOWPORT.
#HIGHPORT = 9700
#LOWPORT = 9600
## If a daemon doens't respond for too long, do you want go generate
## a core file? This bascially controls the type of the signal
## sent to the child process, and mostly affects the Condor Master
#NOT_RESPONDING_WANT_CORE = False
######################################################################
## Daemon-specific settings:
######################################################################
##--------------------------------------------------------------------
## condor_master
##--------------------------------------------------------------------
## Daemons you want the master to keep running for you:
DAEMON_LIST = MASTER, STARTD, SCHEDD
## Which daemons use the Condor DaemonCore library (i.e., not the
## checkpoint server or custom user daemons)?
#DC_DAEMON_LIST = \
#MASTER, STARTD, SCHEDD, KBDD, COLLECTOR, NEGOTIATOR, EVENTD, \
#VIEW_SERVER, CONDOR_VIEW, VIEW_COLLECTOR, HAWKEYE, CREDD, HAD, \
#DBMSD, QUILL, JOB_ROUTER, ROOSTER, LEASEMANAGER, HDFS, SHARED_PORT
## Where are the binaries for these daemons?
MASTER = $(SBIN)/condor_master
STARTD = $(SBIN)/condor_startd
SCHEDD = $(SBIN)/condor_schedd
KBDD = $(SBIN)/condor_kbdd
NEGOTIATOR = $(SBIN)/condor_negotiator
COLLECTOR = $(SBIN)/condor_collector
STARTER_LOCAL = $(SBIN)/condor_starter
JOB_ROUTER = $(LIBEXEC)/condor_job_router
ROOSTER = $(LIBEXEC)/condor_rooster
HDFS = $(SBIN)/condor_hdfs
SHARED_PORT = $(LIBEXEC)/condor_shared_port
TRANSFERER = $(LIBEXEC)/condor_transferer
## When the master starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need to query the central manager to find the master. This
## feature can be turned off by commenting out this setting.
MASTER_ADDRESS_FILE = $(LOG)/.master_address
## Where should the master find the condor_preen binary? If you don't
## want preen to run at all, set it to nothing.
PREEN = $(SBIN)/condor_preen
## How do you want preen to behave? The "-m" means you want email
## about files preen finds that it thinks it should remove. The "-r"
## means you want preen to actually remove these files. If you don't
## want either of those things to happen, just remove the appropriate
## one from this setting.
PREEN_ARGS = -m -r
## How often should the master start up condor_preen? (once a day)
#PREEN_INTERVAL = 86400
## If a daemon dies an unnatural death, do you want email about it?
#PUBLISH_OBITUARIES = True
## If you're getting obituaries, how many lines of the end of that
## daemon's log file do you want included in the obituary?
#OBITUARY_LOG_LENGTH = 20
## Should the master run?
#START_MASTER = True
## Should the master start up the daemons you want it to?
#START_DAEMONS = True
## How often do you want the master to send an update to the central
## manager?
#MASTER_UPDATE_INTERVAL = 300
## How often do you want the master to check the timestamps of the
## daemons it's running? If any daemons have been modified, the
## master restarts them.
#MASTER_CHECK_NEW_EXEC_INTERVAL = 300
## Once you notice new binaries, how long should you wait before you
## try to execute them?
#MASTER_NEW_BINARY_DELAY = 120
## What's the maximum amount of time you're willing to give the
## daemons to quickly shutdown before you just kill them outright?
#SHUTDOWN_FAST_TIMEOUT = 120
######
## Exponential backoff settings:
######
## When a daemon keeps crashing, we use "exponential backoff" so we
## wait longer and longer before restarting it. This is the base of
## the exponent used to determine how long to wait before starting
## the daemon again:
#MASTER_BACKOFF_FACTOR = 2.0
## What's the maximum amount of time you want the master to wait
## between attempts to start a given daemon? (With 2.0 as the
## MASTER_BACKOFF_FACTOR, you'd hit 1 hour in 12 restarts...)
#MASTER_BACKOFF_CEILING = 3600
## How long should a daemon run without crashing before we consider
## it "recovered". Once a daemon has recovered, we reset the number
## of restarts so the exponential backoff stuff goes back to normal.
#MASTER_RECOVER_FACTOR = 300
##--------------------------------------------------------------------
## condor_collector
##--------------------------------------------------------------------
## Address to which Condor will send a weekly e-mail with output of
## condor_status.
#CONDOR_DEVELOPERS = condor-admin@cs.wisc.edu
## Global Collector to periodically advertise basic information about
## your pool.
#CONDOR_DEVELOPERS_COLLECTOR = condor.cs.wisc.edu
##--------------------------------------------------------------------
## condor_negotiator
##--------------------------------------------------------------------
## Determine if the Negotiator will honor SlotWeight attributes, which
## may be used to give a slot greater weight when calculating usage.
#NEGOTIATOR_USE_SLOT_WEIGHTS = True
## How often the Negotaitor starts a negotiation cycle, defined in
## seconds.
#NEGOTIATOR_INTERVAL = 60
## Should the Negotiator publish an update to the Collector after
## every negotiation cycle. It is useful to have this set to True
## to get immediate updates on LastNegotiationCycle statistics.
#NEGOTIATOR_UPDATE_AFTER_CYCLE = False
##--------------------------------------------------------------------
## condor_startd
##--------------------------------------------------------------------
## Where are the various condor_starter binaries installed?
STARTER_LIST = STARTER, STARTER_STANDARD
STARTER = $(SBIN)/condor_starter
STARTER_STANDARD = $(SBIN)/condor_starter.std
STARTER_LOCAL = $(SBIN)/condor_starter
## When the startd starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need to query the central manager to find the startd. This
## feature can be turned off by commenting out this setting.
STARTD_ADDRESS_FILE = $(LOG)/.startd_address
## When a machine is claimed, how often should we poll the state of
## the machine to see if we need to evict/suspend the job, etc?
#POLLING_INTERVAL = 5
## How often should the startd send updates to the central manager?
#UPDATE_INTERVAL = 300
## How long is the startd willing to stay in the "matched" state?
#MATCH_TIMEOUT = 300
## How long is the startd willing to stay in the preempting/killing
## state before it just kills the starter directly?
#KILLING_TIMEOUT = 30
## When a machine unclaimed, when should it run benchmarks?
## LastBenchmark is initialized to 0, so this expression says as soon
## as we're unclaimed, run the benchmarks. Thereafter, if we're
## unclaimed and it's been at least 4 hours since we ran the last
## benchmarks, run them again. The startd keeps a weighted average
## of the benchmark results to provide more accurate values.
## Note, if you don't want any benchmarks run at all, either comment
## RunBenchmarks out, or set it to "False".
BenchmarkTimer = (time() - LastBenchmark)
RunBenchmarks : (LastBenchmark == 0 ) || ($(BenchmarkTimer) >= (4 * $(HOUR)))
#RunBenchmarks : False
## When the startd does benchmarks, which set of benchmarks should we
## run? The default is the same as pre-7.5.6: MIPS and KFLOPS.
benchmarks_joblist = mips kflops
## What's the max "load" of all running benchmarks? With the default
## (1.01), the startd will run the benchmarks serially.
benchmarks_max_job_load = 1.0
# MIPS (Dhrystone 2.1) benchmark: load 1.0
benchmarks_mips_executable = $(LIBEXEC)/condor_mips
benchmarks_mips_job_load = 1.0
# KFLOPS (clinpack) benchmark: load 1.0
benchmarks_kflops_executable = $(LIBEXEC)/condor_kflops
benchmarks_kflops_job_load = 1.0
## Normally, when the startd is computing the idle time of all the
## users of the machine (both local and remote), it checks the utmp
## file to find all the currently active ttys, and only checks access
## time of the devices associated with active logins. Unfortunately,
## on some systems, utmp is unreliable, and the startd might miss
## keyboard activity by doing this. So, if your utmp is unreliable,
## set this setting to True and the startd will check the access time
## on all tty and pty devices.
#STARTD_HAS_BAD_UTMP = False
## This entry allows the startd to monitor console (keyboard and
## mouse) activity by checking the access times on special files in
## /dev. Activity on these files shows up as "ConsoleIdle" time in
## the startd's ClassAd. Just give a comma-separated list of the
## names of devices you want considered the console, without the
## "/dev/" portion of the pathname.
#CONSOLE_DEVICES = mouse, console
## The STARTD_ATTRS (and legacy STARTD_EXPRS) entry allows you to
## have the startd advertise arbitrary attributes from the config
## file in its ClassAd. Give the comma-separated list of entries
## from the config file you want in the startd ClassAd.
## NOTE: because of the different syntax of the config file and
## ClassAds, you might have to do a little extra work to get a given
## entry into the ClassAd. In particular, ClassAds require double
## quotes (") around your strings. Numeric values can go in
## directly, as can boolean expressions. For example, if you wanted
## the startd to advertise its list of console devices, when it's
## configured to run benchmarks, and how often it sends updates to
## the central manager, you'd have to define the following helper
## macro:
#MY_CONSOLE_DEVICES = "$(CONSOLE_DEVICES)"
## Note: this must come before you define STARTD_ATTRS because macros
## must be defined before you use them in other macros or
## expressions.
## Then, you'd set the STARTD_ATTRS setting to this:
#STARTD_ATTRS = MY_CONSOLE_DEVICES, RunBenchmarks, UPDATE_INTERVAL
##
## STARTD_ATTRS can also be defined on a per-slot basis. The startd
## builds the list of attributes to advertise by combining the lists
## in this order: STARTD_ATTRS, SLOTx_STARTD_ATTRS. In the below
## example, the startd ad for slot1 will have the value for
## favorite_color, favorite_season, and favorite_movie, and slot2
## will have favorite_color, favorite_season, and favorite_song.
##
#STARTD_ATTRS = favorite_color, favorite_season
#SLOT1_STARTD_ATTRS = favorite_movie
#SLOT2_STARTD_ATTRS = favorite_song
##
## Attributes in the STARTD_ATTRS list can also be on a per-slot basis.
## For example, the following configuration:
##
#favorite_color = "blue"
#favorite_season = "spring"
#SLOT2_favorite_color = "green"
#SLOT3_favorite_season = "summer"
#STARTD_ATTRS = favorite_color, favorite_season
##
## will result in the following attributes in the slot classified
## ads:
##
## slot1 - favorite_color = "blue"; favorite_season = "spring"
## slot2 - favorite_color = "green"; favorite_season = "spring"
## slot3 - favorite_color = "blue"; favorite_season = "summer"
##
## Finally, the recommended default value for this setting, is to
## publish the COLLECTOR_HOST setting as a string. This can be
## useful using the "$$(COLLECTOR_HOST)" syntax in the submit file
## for jobs to know (for example, via their environment) what pool
## they're running in.
COLLECTOR_HOST_STRING = "$(COLLECTOR_HOST)"
STARTD_ATTRS = COLLECTOR_HOST_STRING
## When the startd is claimed by a remote user, it can also advertise
## arbitrary attributes from the ClassAd of the job its working on.
## Just list the attribute names you want advertised.
## Note: since this is already a ClassAd, you don't have to do
## anything funny with strings, etc. This feature can be turned off
## by commenting out this setting (there is no default).
STARTD_JOB_EXPRS = ImageSize, ExecutableSize, JobUniverse, NiceUser
## If you want to "lie" to Condor about how many CPUs your machine
## has, you can use this setting to override Condor's automatic
## computation. If you modify this, you must restart the startd for
## the change to take effect (a simple condor_reconfig will not do).
## Please read the section on "condor_startd Configuration File
## Macros" in the Condor Administrators Manual for a further
## discussion of this setting. Its use is not recommended. This
## must be an integer ("N" isn't a valid setting, that's just used to
## represent the default).
#NUM_CPUS = N
## If you never want Condor to detect more the "N" CPUs, uncomment this
## line out. You must restart the startd for this setting to take
## effect. If set to 0 or a negative number, it is ignored.
## By default, it is ignored. Otherwise, it must be a positive
## integer ("N" isn't a valid setting, that's just used to
## represent the default).
#MAX_NUM_CPUS = N
## Normally, Condor will automatically detect the amount of physical
## memory available on your machine. Define MEMORY to tell Condor
## how much physical memory (in MB) your machine has, overriding the
## value Condor computes automatically. For example:
#MEMORY = 128
## How much memory would you like reserved from Condor? By default,
## Condor considers all the physical memory of your machine as
## available to be used by Condor jobs. If RESERVED_MEMORY is
## defined, Condor subtracts it from the amount of memory it
## advertises as available.
#RESERVED_MEMORY = 0
######
## SMP startd settings
##
## By default, Condor will evenly divide the resources in an SMP
## machine (such as RAM, swap space and disk space) among all the
## CPUs, and advertise each CPU as its own slot with an even share of
## the system resources. If you want something other than this,
## there are a few options available to you. Please read the section
## on "Configuring The Startd for SMP Machines" in the Condor
## Administrator's Manual for full details. The various settings are
## only briefly listed and described here.
######
## The maximum number of different slot types.
#MAX_SLOT_TYPES = 10
## Use this setting to define your own slot types. This
## allows you to divide system resources unevenly among your CPUs.
## You must use a different setting for each different type you
## define. The "<N>" in the name of the macro listed below must be
## an integer from 1 to MAX_SLOT_TYPES (defined above),
## and you use this number to refer to your type. There are many
## different formats these settings can take, so be sure to refer to
## the section on "Configuring The Startd for SMP Machines" in the
## Condor Administrator's Manual for full details. In particular,
## read the section titled "Defining Slot Types" to help
## understand this setting. If you modify any of these settings, you
## must restart the condor_start for the change to take effect.
#SLOT_TYPE_<N> = 1/4
#SLOT_TYPE_<N> = cpus=1, ram=25%, swap=1/4, disk=1/4
# For example:
#SLOT_TYPE_1 = 1/8
#SLOT_TYPE_2 = 1/4
## If you define your own slot types, you must specify how
## many slots of each type you wish to advertise. You do
## this with the setting below, replacing the "<N>" with the
## corresponding integer you used to define the type above. You can
## change the number of a given type being advertised at run-time,
## with a simple condor_reconfig.
#NUM_SLOTS_TYPE_<N> = M
# For example:
#NUM_SLOTS_TYPE_1 = 6
#NUM_SLOTS_TYPE_2 = 1
## The number of evenly-divided slots you want Condor to
## report to your pool (if less than the total number of CPUs). This
## setting is only considered if the "type" settings described above
## are not in use. By default, all CPUs are reported. This setting
## must be an integer ("N" isn't a valid setting, that's just used to
## represent the default).
#NUM_SLOTS = N
## How many of the slots the startd is representing should
## be "connected" to the console (in other words, notice when there's
## console activity)? This defaults to all slots (N in a
## machine with N CPUs). This must be an integer ("N" isn't a valid
## setting, that's just used to represent the default).
#SLOTS_CONNECTED_TO_CONSOLE = N
## How many of the slots the startd is representing should
## be "connected" to the keyboard (for remote tty activity, as well
## as console activity). Defaults to 1.
#SLOTS_CONNECTED_TO_KEYBOARD = 1
## If there are slots that aren't connected to the
## keyboard or the console (see the above two settings), the
## corresponding idle time reported will be the time since the startd
## was spawned, plus the value of this parameter. It defaults to 20
## minutes. We do this because, if the slot is configured
## not to care about keyboard activity, we want it to be available to
## Condor jobs as soon as the startd starts up, instead of having to
## wait for 15 minutes or more (which is the default time a machine
## must be idle before Condor will start a job). If you don't want
## this boost, just set the value to 0. If you change your START
## expression to require more than 15 minutes before a job starts,
## but you still want jobs to start right away on some of your SMP
## nodes, just increase this parameter.
#DISCONNECTED_KEYBOARD_IDLE_BOOST = 1200
######
## Settings for computing optional resource availability statistics:
######
## If STARTD_COMPUTE_AVAIL_STATS = True, the startd will compute
## statistics about resource availability to be included in the
## classad(s) sent to the collector describing the resource(s) the
## startd manages. The following attributes will always be included
## in the resource classad(s) if STARTD_COMPUTE_AVAIL_STATS = True:
## AvailTime = What proportion of the time (between 0.0 and 1.0)
## has this resource been in a state other than "Owner"?
## LastAvailInterval = What was the duration (in seconds) of the
## last period between "Owner" states?
## The following attributes will also be included if the resource is
## not in the "Owner" state:
## AvailSince = At what time did the resource last leave the
## "Owner" state? Measured in the number of seconds since the
## epoch (00:00:00 UTC, Jan 1, 1970).
## AvailTimeEstimate = Based on past history, this is an estimate
## of how long the current period between "Owner" states will
## last.
#STARTD_COMPUTE_AVAIL_STATS = False
## If STARTD_COMPUTE_AVAIL_STATS = True, STARTD_AVAIL_CONFIDENCE sets
## the confidence level of the AvailTimeEstimate. By default, the
## estimate is based on the 80th percentile of past values.
#STARTD_AVAIL_CONFIDENCE = 0.8
## STARTD_MAX_AVAIL_PERIOD_SAMPLES limits the number of samples of
## past available intervals stored by the startd to limit memory and
## disk consumption. Each sample requires 4 bytes of memory and
## approximately 10 bytes of disk space.
#STARTD_MAX_AVAIL_PERIOD_SAMPLES = 100
## CKPT_PROBE is the location of a program which computes aspects of the
## CheckpointPlatform classad attribute. By default the location of this
## executable will be here: $(LIBEXEC)/condor_ckpt_probe
CKPT_PROBE = $(LIBEXEC)/condor_ckpt_probe
##--------------------------------------------------------------------
## condor_schedd
##--------------------------------------------------------------------
## Where are the various shadow binaries installed?
SHADOW_LIST = SHADOW, SHADOW_STANDARD
SHADOW = $(SBIN)/condor_shadow
SHADOW_STANDARD = $(SBIN)/condor_shadow.std
## When the schedd starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need to query the central manager to find the schedd. This
## feature can be turned off by commenting out this setting.
SCHEDD_ADDRESS_FILE = $(SPOOL)/.schedd_address
## Additionally, a daemon may store its ClassAd on the local filesystem
## as well as sending it to the collector. This way, tools that need
## information about a daemon do not have to contact the central manager
## to get information about a daemon on the same machine.
## This feature is necessary for Quill to work.
SCHEDD_DAEMON_AD_FILE = $(SPOOL)/.schedd_classad
## How often should the schedd send an update to the central manager?
#SCHEDD_INTERVAL = 300
## How long should the schedd wait between spawning each shadow?
#JOB_START_DELAY = 2
## How many concurrent sub-processes should the schedd spawn to handle
## queries? (Unix only)
#SCHEDD_QUERY_WORKERS = 3
## How often should the schedd send a keep alive message to any
## startds it has claimed? (5 minutes)
#ALIVE_INTERVAL = 300
## This setting controls the maximum number of times that a
## condor_shadow processes can have a fatal error (exception) before
## the condor_schedd will simply relinquish the match associated with
## the dying shadow.
#MAX_SHADOW_EXCEPTIONS = 5
## Estimated virtual memory size of each condor_shadow process.
## Specified in kilobytes.
# SHADOW_SIZE_ESTIMATE = 800
## The condor_schedd can renice the condor_shadow processes on your
## submit machines. How "nice" do you want the shadows? (1-19).
## The higher the number, the lower priority the shadows have.
# SHADOW_RENICE_INCREMENT = 0
## The condor_schedd can renice scheduler universe processes
## (e.g. DAGMan) on your submit machines. How "nice" do you want the
## scheduler universe processes? (1-19). The higher the number, the
## lower priority the processes have.
# SCHED_UNIV_RENICE_INCREMENT = 0
## By default, when the schedd fails to start an idle job, it will
## not try to start any other idle jobs in the same cluster during
## that negotiation cycle. This makes negotiation much more
## efficient for large job clusters. However, in some cases other
## jobs in the cluster can be started even though an earlier job
## can't. For example, the jobs' requirements may differ, because of
## different disk space, memory, or operating system requirements.
## Or, machines may be willing to run only some jobs in the cluster,
## because their requirements reference the jobs' virtual memory size
## or other attribute. Setting NEGOTIATE_ALL_JOBS_IN_CLUSTER to True
## will force the schedd to try to start all idle jobs in each
## negotiation cycle. This will make negotiation cycles last longer,
## but it will ensure that all jobs that can be started will be
## started.
#NEGOTIATE_ALL_JOBS_IN_CLUSTER = False
## This setting controls how often, in seconds, the schedd considers
## periodic job actions given by the user in the submit file.
## (Currently, these are periodic_hold, periodic_release, and periodic_remove.)
#PERIODIC_EXPR_INTERVAL = 60
######
## Queue management settings:
######
## How often should the schedd truncate it's job queue transaction
## log? (Specified in seconds, once a day is the default.)
#QUEUE_CLEAN_INTERVAL = 86400
## How often should the schedd commit "wall clock" run time for jobs
## to the queue, so run time statistics remain accurate when the
## schedd crashes? (Specified in seconds, once per hour is the
## default. Set to 0 to disable.)
#WALL_CLOCK_CKPT_INTERVAL = 3600
## What users do you want to grant super user access to this job
## queue? (These users will be able to remove other user's jobs).
## By default, this only includes root.
QUEUE_SUPER_USERS = root, condor
##--------------------------------------------------------------------
## condor_shadow
##--------------------------------------------------------------------
## If the shadow is unable to read a checkpoint file from the
## checkpoint server, it keeps trying only if the job has accumulated
## more than MAX_DISCARDED_RUN_TIME seconds of CPU usage. Otherwise,
## the job is started from scratch. Defaults to 1 hour. This
## setting is only used if USE_CKPT_SERVER (from above) is True.
#MAX_DISCARDED_RUN_TIME = 3600
## Should periodic checkpoints be compressed?
#COMPRESS_PERIODIC_CKPT = False
## Should vacate checkpoints be compressed?
#COMPRESS_VACATE_CKPT = False
## Should we commit the application's dirty memory pages to swap
## space during a periodic checkpoint?
#PERIODIC_MEMORY_SYNC = False
## Should we write vacate checkpoints slowly? If nonzero, this
## parameter specifies the speed at which vacate checkpoints should
## be written, in kilobytes per second.
#SLOW_CKPT_SPEED = 0
## How often should the shadow update the job queue with job
## attributes that periodically change? Specified in seconds.
#SHADOW_QUEUE_UPDATE_INTERVAL = 15 * 60
## Should the shadow wait to update certain job attributes for the
## next periodic update, or should it immediately these update
## attributes as they change? Due to performance concerns of
## aggressive updates to a busy condor_schedd, the default is True.
#SHADOW_LAZY_QUEUE_UPDATE = TRUE
##--------------------------------------------------------------------
## condor_starter
##--------------------------------------------------------------------
## The condor_starter can renice the processes of Condor
## jobs on your execute machines. If you want this, uncomment the
## following entry and set it to how "nice" you want the user
## jobs. (1-19) The larger the number, the lower priority the
## process gets on your machines.
## Note on Win32 platforms, this number needs to be greater than
## zero (i.e. the job must be reniced) or the mechanism that
## monitors CPU load on Win32 systems will give erratic results.
#JOB_RENICE_INCREMENT = 10
## Should the starter do local logging to its own log file, or send
## debug information back to the condor_shadow where it will end up
## in the ShadowLog?
#STARTER_LOCAL_LOGGING = TRUE
## If the UID_DOMAIN settings match on both the execute and submit
## machines, but the UID of the user who submitted the job isn't in
## the passwd file of the execute machine, the starter will normally
## exit with an error. Do you want the starter to just start up the
## job with the specified UID, even if it's not in the passwd file?
#SOFT_UID_DOMAIN = FALSE
## honor the run_as_owner option from the condor submit file.
##
#STARTER_ALLOW_RUNAS_OWNER = TRUE
## Tell the Starter/Startd what program to use to remove a directory
## condor_rmdir.exe is a windows-only command that does a better job
## than the built-in rmdir command when it is run with elevated privileges
## Such as when when Condor is running as a service.
## /s is delete subdirectories
## /c is continue on error
WINDOWS_RMDIR = $(SBIN)\condor_rmdir.exe
#WINDOWS_RMDIR_OPTIONS = /s /c
##--------------------------------------------------------------------
## condor_procd
##--------------------------------------------------------------------
##
# the path to the procd binary
#
PROCD = $(SBIN)/condor_procd
# the path to the procd "address"
# - on UNIX this will be a named pipe; we'll put it in the
# $(LOCK) directory by default (note that multiple named pipes
# will be created in this directory for when the procd responds
# to its clients)
# - on Windows, this will be a named pipe as well (but named pipes on
# Windows are not even close to the same thing as named pipes on
# UNIX); the name will be something like:
# \\.\pipe\condor_procd
#
PROCD_ADDRESS = $(LOCK)/procd_pipe
# The procd currently uses a very simplistic logging system. Since this
# log will not be rotated like other Condor logs, it is only recommended
# to set PROCD_LOG when attempting to debug a problem. In other Condor
# daemons, turning on D_PROCFAMILY will result in that daemon logging
# all of its interactions with the ProcD.
#
#PROCD_LOG = $(LOG)/ProcLog
# This is the maximum period that the procd will use for taking
# snapshots (the actual period may be lower if a condor daemon registers
# a family for which it wants more frequent snapshots)
#
PROCD_MAX_SNAPSHOT_INTERVAL = 60
# On Windows, we send a process a "soft kill" via a WM_CLOSE message.
# This binary is used by the ProcD (and other Condor daemons if PRIVSEP
# is not enabled) to help when sending soft kills.
WINDOWS_SOFTKILL = $(SBIN)/condor_softkill
##--------------------------------------------------------------------
## condor_submit
##--------------------------------------------------------------------
## If you want condor_submit to automatically append an expression to
## the Requirements expression or Rank expression of jobs at your
## site, uncomment these entries.
#APPEND_REQUIREMENTS = (expression to append job requirements)
#APPEND_RANK = (expression to append job rank)
## If you want expressions only appended for either standard or
## vanilla universe jobs, you can uncomment these entries. If any of
## them are defined, they are used for the given universe, instead of
## the generic entries above.
#APPEND_REQ_VANILLA = (expression to append to vanilla job requirements)
#APPEND_REQ_STANDARD = (expression to append to standard job requirements)
#APPEND_RANK_STANDARD = (expression to append to vanilla job rank)
#APPEND_RANK_VANILLA = (expression to append to standard job rank)
## This can be used to define a default value for the rank expression
## if one is not specified in the submit file.
#DEFAULT_RANK = (default rank expression for all jobs)
## If you want universe-specific defaults, you can use the following
## entries:
#DEFAULT_RANK_VANILLA = (default rank expression for vanilla jobs)
#DEFAULT_RANK_STANDARD = (default rank expression for standard jobs)
## If you want condor_submit to automatically append expressions to
## the job ClassAds it creates, you can uncomment and define the
## SUBMIT_EXPRS setting. It works just like the STARTD_EXPRS
## described above with respect to ClassAd vs. config file syntax,
## strings, etc. One common use would be to have the full hostname
## of the machine where a job was submitted placed in the job
## ClassAd. You would do this by uncommenting the following lines:
#MACHINE = "$(FULL_HOSTNAME)"
#SUBMIT_EXPRS = MACHINE
## Condor keeps a buffer of recently-used data for each file an
## application opens. This macro specifies the default maximum number
## of bytes to be buffered for each open file at the executing
## machine.
#DEFAULT_IO_BUFFER_SIZE = 524288
## Condor will attempt to consolidate small read and write operations
## into large blocks. This macro specifies the default block size
## Condor will use.
#DEFAULT_IO_BUFFER_BLOCK_SIZE = 32768
##--------------------------------------------------------------------
## condor_preen
##--------------------------------------------------------------------
## Who should condor_preen send email to?
#PREEN_ADMIN = $(CONDOR_ADMIN)
## What files should condor_preen leave in the spool directory?
VALID_SPOOL_FILES = job_queue.log, job_queue.log.tmp, history, \
Accountant.log, Accountantnew.log, \
local_univ_execute, .quillwritepassword, \
.pgpass, \
.schedd_address, .schedd_classad
## What files should condor_preen remove from the log directory?
INVALID_LOG_FILES = core
##--------------------------------------------------------------------
## Java parameters:
##--------------------------------------------------------------------
## If you would like this machine to be able to run Java jobs,
## then set JAVA to the path of your JVM binary. If you are not
## interested in Java, there is no harm in leaving this entry
## empty or incorrect.
JAVA = /usr/bin/java
## JAVA_CLASSPATH_DEFAULT gives the default set of paths in which
## Java classes are to be found. Each path is separated by spaces.
## If your JVM needs to be informed of additional directories, add
## them here. However, do not remove the existing entries, as Condor
## needs them.
JAVA_CLASSPATH_DEFAULT = $(LIB) $(LIB)/scimark2lib.jar .
## JAVA_CLASSPATH_ARGUMENT describes the command-line parameter
## used to introduce a new classpath:
JAVA_CLASSPATH_ARGUMENT = -classpath
## JAVA_CLASSPATH_SEPARATOR describes the character used to mark
## one path element from another:
JAVA_CLASSPATH_SEPARATOR = :
## JAVA_BENCHMARK_TIME describes the number of seconds for which
## to run Java benchmarks. A longer time yields a more accurate
## benchmark, but consumes more otherwise useful CPU time.
## If this time is zero or undefined, no Java benchmarks will be run.
JAVA_BENCHMARK_TIME = 2
## If your JVM requires any special arguments not mentioned in
## the options above, then give them here.
JAVA_EXTRA_ARGUMENTS =
##
##--------------------------------------------------------------------
## Condor-G settings
##--------------------------------------------------------------------
## Where is the GridManager binary installed?
GRIDMANAGER = $(SBIN)/condor_gridmanager
GT2_GAHP = $(SBIN)/gahp_server
GRID_MONITOR = $(SBIN)/grid_monitor.sh
##--------------------------------------------------------------------
## Settings that control the daemon's debugging output:
##--------------------------------------------------------------------
##
## Note that the Gridmanager runs as the User, not a Condor daemon, so
## all users must have write permssion to the directory that the
## Gridmanager will use for it's logfile. Our suggestion is to create a
## directory called GridLogs in $(LOG) with UNIX permissions 1777
## (just like /tmp )
## Another option is to use /tmp as the location of the GridManager log.
##
MAX_GRIDMANAGER_LOG = 1000000
GRIDMANAGER_DEBUG =
GRIDMANAGER_LOG = $(LOG)/GridmanagerLog.$(USERNAME)
GRIDMANAGER_LOCK = $(LOCK)/GridmanagerLock.$(USERNAME)
##--------------------------------------------------------------------
## Various other settings that the Condor-G can use.
##--------------------------------------------------------------------
## For grid-type gt2 jobs (pre-WS GRAM), limit the number of jobmanager
## processes the gridmanager will let run on the headnode. Letting too
## many jobmanagers run causes severe load on the headnode.
GRIDMANAGER_MAX_JOBMANAGERS_PER_RESOURCE = 10
## If we're talking to a Globus 2.0 resource, Condor-G will use the new
## version of the GRAM protocol. The first option is how often to check the
## proxy on the submit site of things. If the GridManager discovers a new
## proxy, it will restart itself and use the new proxy for all future
## jobs launched. In seconds, and defaults to 10 minutes
#GRIDMANAGER_CHECKPROXY_INTERVAL = 600
## The GridManager will shut things down 3 minutes before loosing Contact
## because of an expired proxy.
## In seconds, and defaults to 3 minutes
#GRDIMANAGER_MINIMUM_PROXY_TIME = 180
## Condor requires that each submitted job be designated to run under a
## particular "universe".
##
## If no universe is specificed in the submit file, Condor must pick one
## for the job to use. By default, it chooses the "vanilla" universe.
## The default can be overridden in the config file with the DEFAULT_UNIVERSE
## setting, which is a string to insert into a job submit description if the
## job does not try and define it's own universe
##
#DEFAULT_UNIVERSE = vanilla
#
# The Cred_min_time_left is the first-pass at making sure that Condor-G
# does not submit your job without it having enough time left for the
# job to finish. For example, if you have a job that runs for 20 minutes, and
# you might spend 40 minutes in the queue, it's a bad idea to submit with less
# than an hour left before your proxy expires.
# 2 hours seemed like a reasonable default.
#
CRED_MIN_TIME_LEFT = 120
##
## The GridMonitor allows you to submit many more jobs to a GT2 GRAM server
## than is normally possible.
#ENABLE_GRID_MONITOR = TRUE
##
## When an error occurs with the GridMonitor, how long should the
## gridmanager wait before trying to submit a new GridMonitor job?
## The default is 1 hour (3600 seconds).
#GRID_MONITOR_DISABLE_TIME = 3600
##
## The location of the wrapper for invoking
## Condor GAHP server
##
CONDOR_GAHP = $(SBIN)/condor_c-gahp
CONDOR_GAHP_WORKER = $(SBIN)/condor_c-gahp_worker_thread
##
## The Condor GAHP server has it's own log. Like the Gridmanager, the
## GAHP server is run as the User, not a Condor daemon, so all users must
## have write permssion to the directory used for the logfile. Our
## suggestion is to create a directory called GridLogs in $(LOG) with
## UNIX permissions 1777 (just like /tmp )
## Another option is to use /tmp as the location of the CGAHP log.
##
MAX_C_GAHP_LOG = 1000000
#C_GAHP_LOG = $(LOG)/GridLogs/CGAHPLog.$(USERNAME)
C_GAHP_LOG = /tmp/CGAHPLog.$(USERNAME)
C_GAHP_LOCK = /tmp/CGAHPLock.$(USERNAME)
C_GAHP_WORKER_THREAD_LOG = /tmp/CGAHPWorkerLog.$(USERNAME)
C_GAHP_WORKER_THREAD_LOCK = /tmp/CGAHPWorkerLock.$(USERNAME)
##
## The location of the wrapper for invoking
## GT4 GAHP server
##
GT4_GAHP = $(SBIN)/gt4_gahp
##
## The location of GT4 files. This should normally be lib/gt4
##
GT4_LOCATION = $(LIB)/gt4
##
## The location of the wrapper for invoking
## GT4 GAHP server
##
GT42_GAHP = $(SBIN)/gt42_gahp
##
## The location of GT4 files. This should normally be lib/gt4
##
GT42_LOCATION = $(LIB)/gt42
##
## gt4 gram requires a gridftp server to perform file transfers.
## If GRIDFTP_URL_BASE is set, then Condor assumes there is a gridftp
## server set up at that URL suitable for its use. Otherwise, Condor
## will start its own gridftp servers as needed, using the binary
## pointed at by GRIDFTP_SERVER. GRIDFTP_SERVER_WRAPPER points to a
## wrapper script needed to properly set the path to the gridmap file.
##
#GRIDFTP_URL_BASE = gsiftp://$(FULL_HOSTNAME)
GRIDFTP_SERVER = $(LIBEXEC)/globus-gridftp-server
GRIDFTP_SERVER_WRAPPER = $(LIBEXEC)/gridftp_wrapper.sh
##
## Location of the PBS/LSF gahp and its associated binaries
##
GLITE_LOCATION = $(LIBEXEC)/glite
PBS_GAHP = $(GLITE_LOCATION)/bin/batch_gahp
LSF_GAHP = $(GLITE_LOCATION)/bin/batch_gahp
##
## The location of the wrapper for invoking the Unicore GAHP server
##
UNICORE_GAHP = $(SBIN)/unicore_gahp
##
## The location of the wrapper for invoking the NorduGrid GAHP server
##
NORDUGRID_GAHP = $(SBIN)/nordugrid_gahp
## The location of the CREAM GAHP server
CREAM_GAHP = $(SBIN)/cream_gahp
## Condor-G and CredD can use MyProxy to refresh GSI proxies which are
## about to expire.
#MYPROXY_GET_DELEGATION = /path/to/myproxy-get-delegation
## The location of the Deltacloud GAHP server
DELTACLOUD_GAHP = $(SBIN)/deltacloud_gahp
##
## EC2: Universe = Grid, Grid_Resource = Amazon
##
## The location of the amazon_gahp program, required
AMAZON_GAHP = $(SBIN)/amazon_gahp
## Location of log files, useful for debugging, must be in
## a directory writable by any user, such as /tmp
#AMAZON_GAHP_DEBUG = D_FULLDEBUG
AMAZON_GAHP_LOG = /tmp/AmazonGahpLog.$(USERNAME)
## The number of seconds between status update requests to EC2. You can
## make this short (5 seconds) if you want Condor to respond quickly to
## instances as they terminate, or you can make it long (300 seconds = 5
## minutes) if you know your instances will run for awhile and don't mind
## delay between when they stop and when Condor responds to them
## stopping.
GRIDMANAGER_JOB_PROBE_INTERVAL = 300
## As of this writing Amazon EC2 has a hard limit of 20 concurrently
## running instances, so a limit of 20 is imposed so the GridManager
## does not waste its time sending requests that will be rejected.
GRIDMANAGER_MAX_SUBMITTED_JOBS_PER_RESOURCE_AMAZON = 20
##
##--------------------------------------------------------------------
## condor_credd credential managment daemon
##--------------------------------------------------------------------
## Where is the CredD binary installed?
CREDD = $(SBIN)/condor_credd
## When the credd starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need an additional "-n host:port" command line option. This
## feature can be turned off by commenting out this setting.
CREDD_ADDRESS_FILE = $(LOG)/.credd_address
## Specify a remote credd server here,
#CREDD_HOST = $(CONDOR_HOST):$(CREDD_PORT)
## CredD startup arguments
## Start the CredD on a well-known port. Uncomment to to simplify
## connecting to a remote CredD. Note: that this interface may change
## in a future release.
CREDD_PORT = 9620
CREDD_ARGS = -p $(CREDD_PORT) -f
## CredD daemon debugging log
CREDD_LOG = $(LOG)/CredLog
CREDD_DEBUG = D_FULLDEBUG
MAX_CREDD_LOG = 4000000
## The credential owner submits the credential. This list specififies
## other user who are also permitted to see all credentials. Defaults
## to root on Unix systems, and Administrator on Windows systems.
#CRED_SUPER_USERS =
## Credential storage location. This directory must exist
## prior to starting condor_credd. It is highly recommended to
## restrict access permissions to _only_ the directory owner.
CRED_STORE_DIR = $(LOCAL_DIR)/cred_dir
## Index file path of saved credentials.
## This file will be automatically created if it does not exist.
#CRED_INDEX_FILE = $(CRED_STORE_DIR/cred-index
## condor_credd will attempt to refresh credentials when their
## remaining lifespan is less than this value. Units = seconds.
#DEFAULT_CRED_EXPIRE_THRESHOLD = 3600
## condor-credd periodically checks remaining lifespan of stored
## credentials, at this interval.
#CRED_CHECK_INTERVAL = 60
##
##--------------------------------------------------------------------
## Stork data placment server
##--------------------------------------------------------------------
## Where is the Stork binary installed?
STORK = $(SBIN)/stork_server
## When Stork starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need an additional "-n host:port" command line option. This
## feature can be turned off by commenting out this setting.
STORK_ADDRESS_FILE = $(LOG)/.stork_address
## Specify a remote Stork server here,
#STORK_HOST = $(CONDOR_HOST):$(STORK_PORT)
## STORK_LOG_BASE specifies the basename for heritage Stork log files.
## Stork uses this macro to create the following output log files:
## $(STORK_LOG_BASE): Stork server job queue classad collection
## journal file.
## $(STORK_LOG_BASE).history: Used to track completed jobs.
## $(STORK_LOG_BASE).user_log: User level log, also used by DAGMan.
STORK_LOG_BASE = $(LOG)/Stork
## Modern Condor DaemonCore logging feature.
STORK_LOG = $(LOG)/StorkLog
STORK_DEBUG = D_FULLDEBUG
MAX_STORK_LOG = 4000000
## Stork startup arguments
## Start Stork on a well-known port. Uncomment to to simplify
## connecting to a remote Stork. Note: that this interface may change
## in a future release.
#STORK_PORT = 34048
STORK_PORT = 9621
STORK_ARGS = -p $(STORK_PORT) -f -Serverlog $(STORK_LOG_BASE)
## Stork environment. Stork modules may require external programs and
## shared object libraries. These are located using the PATH and
## LD_LIBRARY_PATH environments. Further, some modules may require
## further specific environments. By default, Stork inherits a full
## environment when invoked from condor_master or the shell. If the
## default environment is not adequate for all Stork modules, specify
## a replacement environment here. This environment will be set by
## condor_master before starting Stork, but does not apply if Stork is
## started directly from the command line.
#STORK_ENVIRONMENT = TMP=/tmp;CONDOR_CONFIG=/special/config;PATH=/lib
## Limits the number of concurrent data placements handled by Stork.
#STORK_MAX_NUM_JOBS = 5
## Limits the number of retries for a failed data placement.
#STORK_MAX_RETRY = 5
## Limits the run time for a data placement job, after which the
## placement is considered failed.
#STORK_MAXDELAY_INMINUTES = 10
## Temporary credential storage directory used by Stork.
#STORK_TMP_CRED_DIR = /tmp
## Directory containing Stork modules.
#STORK_MODULE_DIR = $(LIBEXEC)
##
##--------------------------------------------------------------------
## Quill Job Queue Mirroring Server
##--------------------------------------------------------------------
## Where is the Quill binary installed and what arguments should be passed?
QUILL = $(SBIN)/condor_quill
#QUILL_ARGS =
# Where is the log file for the quill daemon?
QUILL_LOG = $(LOG)/QuillLog
# The identification and location of the quill daemon for local clients.
QUILL_ADDRESS_FILE = $(LOG)/.quill_address
# If this is set to true, then the rest of the QUILL arguments must be defined
# for quill to function. If it is Fase or left undefined, then quill will not
# be consulted by either the scheduler or the tools, but in the case of a
# remote quill query where the local client has quill turned off, but the
# remote client has quill turned on, things will still function normally.
#QUILL_ENABLED = TRUE
#
# If Quill is enabled, by default it will only mirror the current job
# queue into the database. For historical jobs, and classads from other
# sources, the SQL Log must be enabled.
#QUILL_USE_SQL_LOG=FALSE
#
# The SQL Log can be enabled on a per-daemon basis. For example, to collect
# historical job information, but store no information about execute machines,
# uncomment these two lines
#QUILL_USE_SQL_LOG = FALSE
#SCHEDD.QUILL_USE_SQL_LOG = TRUE
# This will be the name of a quill daemon using this config file. This name
# should not conflict with any other quill name--or schedd name.
#QUILL_NAME = quill@postgresql-server.machine.com
# The Postgreql server requires usernames that can manipulate tables. This will
# be the username associated with this instance of the quill daemon mirroring
# a schedd's job queue. Each quill daemon must have a unique username
# associated with it otherwise multiple quill daemons will corrupt the data
# held under an indentical user name.
#QUILL_DB_NAME = name_of_db
# The required password for the DB user which quill will use to read
# information from the database about the queue.
#QUILL_DB_QUERY_PASSWORD = foobar
# What kind of database server is this?
# For now, only PGSQL is supported
#QUILL_DB_TYPE = PGSQL
# The machine and port of the postgres server.
# Although this says IP Addr, it can be a DNS name.
# It must match whatever format you used for the .pgpass file, however
#QUILL_DB_IP_ADDR = machine.domain.com:5432
# The login to use to attach to the database for updating information.
# There should be an entry in file $SPOOL/.pgpass that gives the password
# for this login id.
#QUILL_DB_USER = quillwriter
# Polling period, in seconds, for when quill reads transactions out of the
# schedd's job queue log file and puts them into the database.
#QUILL_POLLING_PERIOD = 10
# Allows or disallows a remote query to the quill daemon and database
# which is reading this log file. Defaults to true.
#QUILL_IS_REMOTELY_QUERYABLE = TRUE
# Add debugging flags to here if you need to debug quill for some reason.
#QUILL_DEBUG = D_FULLDEBUG
# Number of seconds the master should wait for the Quill daemon to respond
# before killing it. This number might need to be increased for very
# large logfiles.
# The default is 3600 (one hour), but kicking it up to a few hours won't hurt
#QUILL_NOT_RESPONDING_TIMEOUT = 3600
# Should Quill hold open a database connection to the DBMSD?
# Each open connection consumes resources at the server, so large pools
# (100 or more machines) should set this variable to FALSE. Note the
# default is TRUE.
#QUILL_MAINTAIN_DB_CONN = TRUE
##
##--------------------------------------------------------------------
## Database Management Daemon settings
##--------------------------------------------------------------------
## Where is the DBMSd binary installed and what arguments should be passed?
DBMSD = $(SBIN)/condor_dbmsd
DBMSD_ARGS = -f
# Where is the log file for the quill daemon?
DBMSD_LOG = $(LOG)/DbmsdLog
# Interval between consecutive purging calls (in seconds)
#DATABASE_PURGE_INTERVAL = 86400
# Interval between consecutive database reindexing operations
# This is only used when dbtype = PGSQL
#DATABASE_REINDEX_INTERVAL = 86400
# Number of days before purging resource classad history
# This includes things like machine ads, daemon ads, submitters
#QUILL_RESOURCE_HISTORY_DURATION = 7
# Number of days before purging job run information
# This includes job events, file transfers, matchmaker matches, etc
# This does NOT include the final job ad. condor_history does not need
# any of this information to work.
#QUILL_RUN_HISTORY_DURATION = 7
# Number of days before purging job classad history
# This is the information needed to run condor_history
#QUILL_JOB_HISTORY_DURATION = 3650
# DB size threshold for warning the condor administrator. This is checked
# after every purge. The size is given in gigabytes.
#QUILL_DBSIZE_LIMIT = 20
# Number of seconds the master should wait for the DBMSD to respond before
# killing it. This number might need to be increased for very large databases
# The default is 3600 (one hour).
#DBMSD_NOT_RESPONDING_TIMEOUT = 3600
##
##--------------------------------------------------------------------
## VM Universe Parameters
##--------------------------------------------------------------------
## Where is the Condor VM-GAHP installed? (Required)
VM_GAHP_SERVER = $(SBIN)/condor_vm-gahp
## If the VM-GAHP is to have its own log, define
## the location of log file.
##
## Optionally, if you do NOT define VM_GAHP_LOG, logs of VM-GAHP will
## be stored in the starter's log file.
## However, on Windows machine you must always define VM_GAHP_LOG.
#
VM_GAHP_LOG = $(LOG)/VMGahpLog
MAX_VM_GAHP_LOG = 1000000
#VM_GAHP_DEBUG = D_FULLDEBUG
## What kind of virtual machine program will be used for
## the VM universe?
## The two options are vmware and xen. (Required)
#VM_TYPE = vmware
## How much memory can be used for the VM universe? (Required)
## This value is the maximum amount of memory that can be used by the
## virtual machine program.
#VM_MEMORY = 128
## Want to support networking for VM universe?
## Default value is FALSE
#VM_NETWORKING = FALSE
## What kind of networking types are supported?
##
## If you set VM_NETWORKING to TRUE, you must define this parameter.
## VM_NETWORKING_TYPE = nat
## VM_NETWORKING_TYPE = bridge
## VM_NETWORKING_TYPE = nat, bridge
##
## If multiple networking types are defined, you may define
## VM_NETWORKING_DEFAULT_TYPE for default networking type.
## Otherwise, nat is used for default networking type.
## VM_NETWORKING_DEFAULT_TYPE = nat
#VM_NETWORKING_DEFAULT_TYPE = nat
#VM_NETWORKING_TYPE = nat
## In default, the number of possible virtual machines is same as
## NUM_CPUS.
## Since too many virtual machines can cause the system to be too slow
## and lead to unexpected problems, limit the number of running
## virtual machines on this machine with
#VM_MAX_NUMBER = 2
## When a VM universe job is started, a status command is sent
## to the VM-GAHP to see if the job is finished.
## If the interval between checks is too short, it will consume
## too much of the CPU. If the VM-GAHP fails to get status 5 times in a row,
## an error will be reported to startd, and then startd will check
## the availability of VM universe.
## Default value is 60 seconds and minimum value is 30 seconds
#VM_STATUS_INTERVAL = 60
## How long will we wait for a request sent to the VM-GAHP to be completed?
## If a request is not completed within the timeout, an error will be reported
## to the startd, and then the startd will check
## the availability of vm universe. Default value is 5 mins.
#VM_GAHP_REQ_TIMEOUT = 300
## When VMware or Xen causes an error, the startd will disable the
## VM universe. However, because some errors are just transient,
## we will test one more
## whether vm universe is still unavailable after some time.
## In default, startd will recheck vm universe after 10 minutes.
## If the test also fails, vm universe will be disabled.
#VM_RECHECK_INTERVAL = 600
## Usually, when we suspend a VM, the memory being used by the VM
## will be saved into a file and then freed.
## However, when we use soft suspend, neither saving nor memory freeing
## will occur.
## For VMware, we send SIGSTOP to a process for VM in order to
## stop the VM temporarily and send SIGCONT to resume the VM.
## For Xen, we pause CPU. Pausing CPU doesn't save the memory of VM
## into a file. It only stops the execution of a VM temporarily.
#VM_SOFT_SUSPEND = TRUE
## If Condor runs as root and a job comes from a different UID domain,
## Condor generally uses "nobody", unless SLOTx_USER is defined.
## If "VM_UNIV_NOBODY_USER" is defined, a VM universe job will run
## as the user defined in "VM_UNIV_NOBODY_USER" instead of "nobody".
##
## Notice: In VMware VM universe, "nobody" can not create a VMware VM.
## So we need to define "VM_UNIV_NOBODY_USER" with a regular user.
## For VMware, the user defined in "VM_UNIV_NOBODY_USER" must have a
## home directory. So SOFT_UID_DOMAIN doesn't work for VMware VM universe job.
## If neither "VM_UNIV_NOBODY_USER" nor "SLOTx_VMUSER"/"SLOTx_USER" is defined,
## VMware VM universe job will run as "condor" instead of "nobody".
## As a result, the preference of local users for a VMware VM universe job
## which comes from the different UID domain is
## "VM_UNIV_NOBODY_USER" -> "SLOTx_VMUSER" -> "SLOTx_USER" -> "condor".
#VM_UNIV_NOBODY_USER = login name of a user who has home directory
## If Condor runs as root and "ALWAYS_VM_UNIV_USE_NOBODY" is set to TRUE,
## all VM universe jobs will run as a user defined in "VM_UNIV_NOBODY_USER".
#ALWAYS_VM_UNIV_USE_NOBODY = FALSE
##--------------------------------------------------------------------
## VM Universe Parameters Specific to VMware
##--------------------------------------------------------------------
## Where is perl program? (Required)
VMWARE_PERL = perl
## Where is the Condor script program to control VMware? (Required)
VMWARE_SCRIPT = $(SBIN)/condor_vm_vmware.pl
## Networking parameters for VMware
##
## What kind of VMware networking is used?
##
## If multiple networking types are defined, you may specify different
## parameters for each networking type.
##
## Examples
## (e.g.) VMWARE_NAT_NETWORKING_TYPE = nat
## (e.g.) VMWARE_BRIDGE_NETWORKING_TYPE = bridged
##
## If there is no parameter for specific networking type, VMWARE_NETWORKING_TYPE is used.
##
#VMWARE_NAT_NETWORKING_TYPE = nat
#VMWARE_BRIDGE_NETWORKING_TYPE = bridged
VMWARE_NETWORKING_TYPE = nat
## The contents of this file will be inserted into the .vmx file of
## the VMware virtual machine before Condor starts it.
#VMWARE_LOCAL_SETTINGS_FILE = /path/to/file
##--------------------------------------------------------------------
## VM Universe Parameters common to libvirt controlled vm's (xen & kvm)
##--------------------------------------------------------------------
## Networking parameters for Xen & KVM
##
## This is the path to the XML helper command; the libvirt_simple_script.awk
## script just reproduces what Condor already does for the kvm/xen VM
## universe
LIBVIRT_XML_SCRIPT = $(LIBEXEC)/libvirt_simple_script.awk
## This is the optional debugging output file for the xml helper
## script. Scripts that need to output debugging messages should
## write them to the file specified by this argument, which will be
## passed as the second command line argument when the script is
## executed
#LIBVRT_XML_SCRIPT_ARGS = /dev/stderr
##--------------------------------------------------------------------
## VM Universe Parameters Specific to Xen
##--------------------------------------------------------------------
## Where is bootloader for Xen domainU? (Required)
##
## The bootloader will be used in the case that a kernel image includes
## a disk image
#XEN_BOOTLOADER = /usr/bin/pygrub
## The contents of this file will be added to the Xen virtual machine
## description that Condor writes.
#XEN_LOCAL_SETTINGS_FILE = /path/to/file
##
##--------------------------------------------------------------------
## condor_lease_manager lease manager daemon
##--------------------------------------------------------------------
## Where is the LeaseManager binary installed?
LeaseManager = $(SBIN)/condor_lease_manager
# Turn on the lease manager
#DAEMON_LIST = $(DAEMON_LIST), LeaseManager
# The identification and location of the lease manager for local clients.
LeaseManger_ADDRESS_FILE = $(LOG)/.lease_manager_address
## LeaseManager startup arguments
#LeaseManager_ARGS = -local-name generic
## LeaseManager daemon debugging log
LeaseManager_LOG = $(LOG)/LeaseManagerLog
LeaseManager_DEBUG = D_FULLDEBUG
MAX_LeaseManager_LOG = 1000000
# Basic parameters
LeaseManager.GETADS_INTERVAL = 60
LeaseManager.UPDATE_INTERVAL = 300
LeaseManager.PRUNE_INTERVAL = 60
LeaseManager.DEBUG_ADS = False
LeaseManager.CLASSAD_LOG = $(SPOOL)/LeaseManagerState
#LeaseManager.QUERY_ADTYPE = Any
#LeaseManager.QUERY_CONSTRAINTS = MyType == "SomeType"
#LeaseManager.QUERY_CONSTRAINTS = TargetType == "SomeType"
##
##--------------------------------------------------------------------
## KBDD - keyboard activity detection daemon
##--------------------------------------------------------------------
## When the KBDD starts up, it can place it's address (IP and port)
## into a file. This way, tools running on the local machine don't
## need an additional "-n host:port" command line option. This
## feature can be turned off by commenting out this setting.
KBDD_ADDRESS_FILE = $(LOG)/.kbdd_address
##
##--------------------------------------------------------------------
## condor_ssh_to_job
##--------------------------------------------------------------------
# NOTE: condor_ssh_to_job is not supported under Windows.
# Tell the starter (execute side) whether to allow the job owner or
# queue super user on the schedd from which the job was submitted to
# use condor_ssh_to_job to access the job interactively (e.g. for
# debugging). TARGET is the job; MY is the machine.
#ENABLE_SSH_TO_JOB = true
# Tell the schedd (submit side) whether to allow the job owner or
# queue super user to use condor_ssh_to_job to access the job
# interactively (e.g. for debugging). MY is the job; TARGET is not
# defined.
#SCHEDD_ENABLE_SSH_TO_JOB = true
# Command condor_ssh_to_job should use to invoke the ssh client.
# %h --> remote host
# %i --> ssh key file
# %k --> known hosts file
# %u --> remote user
# %x --> proxy command
# %% --> %
#SSH_TO_JOB_SSH_CMD = ssh -oUser=%u -oIdentityFile=%i -oStrictHostKeyChecking=yes -oUserKnownHostsFile=%k -oGlobalKnownHostsFile=%k -oProxyCommand=%x %h
# Additional ssh clients may be configured. They all have the same
# default as ssh, except for scp, which omits the %h:
#SSH_TO_JOB_SCP_CMD = scp -oUser=%u -oIdentityFile=%i -oStrictHostKeyChecking=yes -oUserKnownHostsFile=%k -oGlobalKnownHostsFile=%k -oProxyCommand=%x
# Path to sshd
#SSH_TO_JOB_SSHD = /usr/sbin/sshd
# Arguments the starter should use to invoke sshd in inetd mode.
# %f --> sshd config file
# %% --> %
#SSH_TO_JOB_SSHD_ARGS = "-i -e -f %f"
# sshd configuration template used by condor_ssh_to_job_sshd_setup.
#SSH_TO_JOB_SSHD_CONFIG_TEMPLATE = $(LIB)/condor_ssh_to_job_sshd_config_template
# Path to ssh-keygen
#SSH_TO_JOB_SSH_KEYGEN = /usr/bin/ssh-keygen
# Arguments to ssh-keygen
# %f --> key file to generate
# %% --> %
#SSH_TO_JOB_SSH_KEYGEN_ARGS = "-N '' -C '' -q -f %f -t rsa"
######################################################################
##
## Condor HDFS
##
## This is the default local configuration file for configuring Condor
## daemon responsible for running services related to hadoop
## distributed storage system.You should copy this file to the
## appropriate location and customize it for your needs.
##
## Unless otherwise specified, settings that are commented out show
## the defaults that are used if you don't define a value. Settings
## that are defined here MUST BE DEFINED since they have no default
## value.
##
######################################################################
######################################################################
## FOLLOWING MUST BE CHANGED
######################################################################
## The location for hadoop installation directory. The default location
## is under 'libexec' directory. The directory pointed by HDFS_HOME
## should contain a lib folder that contains all the required Jars necessary
## to run HDFS name and data nodes.
#HDFS_HOME = $(RELEASE_DIR)/libexec/hdfs
## The host and port for hadoop's name node. If this machine is the
## name node (see HDFS_SERVICES) then the specified port will be used
## to run name node.
HDFS_NAMENODE = hdfs://example.com:9000
HDFS_NAMENODE_WEB = example.com:8000
HDFS_BACKUPNODE = hdfs://example.com:50100
HDFS_BACKUPNODE_WEB = example.com:50105
## You need to pick one machine as name node by setting this parameter
## to HDFS_NAMENODE. The remaining machines in a storage cluster will
## act as data nodes (HDFS_DATANODE).
HDFS_NODETYPE = HDFS_DATANODE
## If machine is selected to be NameNode then by a role should defined.
## If it selected to be DataNode then this paramer is ignored.
## Available options:
## ACTIVE: Active NameNode role (default value)
## BACKUP: Always synchronized with the active NameNode state, thus
## creating a backup of the namespace. Currently the NameNode
## supports one Backup node at a time.
## CHECKPOINT: Periodically creates checkpoints of the namespace.
HDFS_NAMENODE_ROLE = ACTIVE
## The two set of directories that are required by HDFS are for name
## node (HDFS_NAMENODE_DIR) and data node (HDFS_DATANODE_DIR). The
## directory for name node is only required for a machine running
## name node service and is used to store critical meta data for
## files. The data node needs its directory to store file blocks and
## their replicas.
HDFS_NAMENODE_DIR = /tmp/hadoop_name
HDFS_DATANODE_DIR = /scratch/tmp/hadoop_data
## Unlike name node address settings (HDFS_NAMENODE), that needs to be
## well known across the storage cluster, data node can run on any
## arbitrary port of given host.
#HDFS_DATANODE_ADDRESS = 0.0.0.0:0
####################################################################
## OPTIONAL
#####################################################################
## Sets the log4j debug level. All the emitted debug output from HDFS
## will go in 'hdfs.log' under $(LOG) directory.
#HDFS_LOG4J=DEBUG
## The access to HDFS services both name node and data node can be
## restricted by specifying IP/host based filters. By default settings
## from ALLOW_READ/ALLOW_WRITE and DENY_READ/DENY_WRITE
## are used to specify allow and deny list. The below two parameters can
## be used to override these settings. Read the Condor manual for
## specification of these filters.
## WARN: HDFS doesn't make any distinction between read or write based connection.
#HDFS_ALLOW=*
#HDFS_DENY=*
#Fully qualified name for Name node and Datanode class.
#HDFS_NAMENODE_CLASS=org.apache.hadoop.hdfs.server.namenode.NameNode
#HDFS_DATANODE_CLASS=org.apache.hadoop.hdfs.server.datanode.DataNode
#HDFS_DFSADMIN_CLASS=org.apache.hadoop.hdfs.tools.DFSAdmin
## In case an old name for hdfs configuration files is required.
#HDFS_SITE_FILE = hdfs-site.xml
Reference in a new issue View git blame Copy permalink