kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/Mk/bsd.perl.mk
Mark Linimon 43b5db1e28 Restore the semantics of USE_PERL and friends by moving them back to 
the 'post' block from which they originally came.  This should fix the
remaining few package build errors because of conditional perl inclusion.

Pointy hat:	linimon
2007-09-13 22:10:33 +00:00

260 lines
9.2 KiB
Makefile
Raw Blame History

#-*- mode: makefile; tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# bsd.perl.mk - Support for Perl-based ports.
#
# Created by: Gabor Kovesdan <gabor@FreeBSD.org>
#
# For FreeBSD committers:
# Please send all suggested changes to the maintainer instead of committing
# them to CVS yourself.
#
# PERL5 - Set to full path of perl5, either in the system or
# installed from a port.
# PERL - Set to full path of perl5, either in the system or
# installed from a port, but without the version number.
# Use this if you need to replace "#!" lines in scripts.
# PERL_VERSION - Full version of perl5 (see below for current value).
# PERL_VER - Short version of perl5 (see below for current value).
# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where
# M is major version, N is minor version, and P is
# the patch level. E.g., PERL_VERSION=5.6.1 would give
# a PERL_LEVEL of 500601. This can be used in comparisons
# to determine if the version of perl is high enough,
# whether a particular dependency is needed, etc.
# PERL_ARCH - Directory name of architecture dependent libraries
# (value: ${ARCH}-freebsd).
# PERL_PORT - Name of the perl port that is installed
# (value: perl5)
# SITE_PERL - Directory name where site specific perl packages go.
# This value is added to PLIST_SUB.
# USE_PERL5 - If your port needs a specific version of Perl, you
# can easily specify that with this knob. If
# you need a certain minimal version, but don't
# care if about the upperversion, just put the
# + sign behind the version. If you want to
# specify a latest version your port can be used
# with, suffix the version number with a - sign.
# Exact version can also be specified if you just
# set USE_PERL5 to the desired version. If you
# just set USE_PERL5 to "yes", Perl will be
# pulled in as a dependency but no version check
# is done.
# USE_PERL5_REASON
# - Along with USE_PERL5, you can set a specific reason,
# why a given version is required.
#
# Examples:
# USE_PERL5= yes # port requires any version of Perl5 to build.
# USE_PERL5= 5.6.0+ # port requires at least Perl 5.6.0 to build.
# USE_PERL5= 5.8.2 # port is only usable with Perl 5.8.2.
# USE_PERL5= 5.8.6- # port is only usbale with Perl 5.8.6 or prior.
#
# This line along with a properly set USE_PERL5 will give the user a reason,
# why the specific ports cannot be installed into the given environment.
#
# USE_PERL5_REASON= this module is already part of your Perl version
#
# PERL_CONFIGURE
# - Configure using Perl's MakeMaker. Implies USE_PERL5.
# The version requirement can be specified here,
# as well.
# USE_PERL5_BUILD
# - If set, this port uses perl5 in one or more of the
# extract, patch, build or install phases.
# The version requirement can be specified here,
# as well.
# USE_PERL5_RUN - If set, this port uses perl5 for running. The
# version requirement can be specified here,
# as well.
# PERL_MODBUILD - Use Module::Build to configure, build and install
# port. The version requirement can be specified
# here, as well.
#
.if !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include)
Perl_Pre_Include= bsd.perl.mk
PERL_Include_MAINTAINER= perl@FreeBSD.org
# XXX to remain undefined until all ports that require Perl are fixed
# to set one of the conditionals that force the inclusion of bsd.perl.mk
.if defined(_PERL_REFACTORING_COMPLETE)
PERL_VERSION?= 5.8.8
PERL_VER?= 5.8.8
.if !defined(PERL_LEVEL) && defined(PERL_VERSION)
perl_major= ${PERL_VERSION:C|\..*||}
_perl_minor= ${PERL_VERSION:S|^${perl_major}||:S|^.||:C|\..*||}
_perl_patch= ${PERL_VERSION:S|^${perl_major}||:S|^.${_perl_minor}||:S|^.||:C|\..*||}
perl_minor= ${_perl_minor:S|^|000|:C|.*(...)|\1|}
perl_patch= ${_perl_patch:S|^|00|:C|.*(..)|\1|}
PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch}
.else
PERL_LEVEL= 0
.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION)
PERL_ARCH?= mach
.if ${PERL_LEVEL} >= 500800
PERL_PORT?= perl5.8
.else # ${PERL_LEVEL} < 500800
PERL_PORT?= perl5
.endif
SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER}
SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL}
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
PERL= ${LOCALBASE}/bin/perl
.endif # defined(_PERL_REFACTORING_COMPLETE)
# Decide where to look for the version string
.ifdef USE_PERL5
USE_PERL5_STRING= ${USE_PERL5}
.elifdef USE_PERL5_BUILD
USE_PERL5_STRING= ${USE_PERL5_BUILD}
.elifdef USE_PERL5_RUN
USE_PERL5_STRING= ${USE_PERL5_RUN}
.elifdef PERL_MODBUILD
USE_PERL5_STRING= ${PERL_MODBUILD}
.elifdef PERL_CONFIGURE
USE_PERL5_STRING= ${PERL_CONFIGURE}
.else
USE_PERL5_STRING= yes # currently unreachable
.endif
.if ${USE_PERL5_STRING:L} != "yes"
want_perl_sign= ${USE_PERL5_STRING:C|^[0-9.]+||}
want_perl_ver= ${USE_PERL5_STRING:S|${want_perl_sign}$||}
want_perl_major= ${want_perl_ver:C|\..*||}
_want_perl_minor= ${want_perl_ver:S|^${want_perl_major}||:S|^.||:C|\..*||}
_want_perl_patch= ${want_perl_ver:S|^${want_perl_major}||:S|^.${_want_perl_minor}||:S|^.||:C|\..*||}
want_perl_minor= ${_want_perl_minor:S|^|000|:C|.*(...)|\1|}
want_perl_patch= ${_want_perl_patch:S|^|00|:C|.*(..)|\1|}
USE_PERL5_LEVEL= ${want_perl_major}${want_perl_minor}${want_perl_patch}
# Mask unspecified components. E.g. this way "5" will match any "5.x.x".
.if empty(_want_perl_minor)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(.....)$|00000|}
.elif empty(_want_perl_patch)
masked_PERL_LEVEL= ${PERL_LEVEL:C|(..)$|00|}
.else
masked_PERL_LEVEL= ${PERL_LEVEL}
.endif
.if ${want_perl_sign} == "+"
.if ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} or later, install lang/perl5.8 and try again
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} > ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == ""
.if ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires Perl ${want_perl_ver} exactly
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} != ${masked_PERL_LEVEL}
.elif ${want_perl_sign} == "-"
.if ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
USE_PERL5_REASON?= requires a Perl version earlier than ${want_perl_ver}
IGNORE= ${USE_PERL5_REASON}
.endif # ${USE_PERL5_LEVEL} <= ${masked_PERL_LEVEL}
.else # wrong suffix
IGNORE= improper use of USE_PERL5
.endif
.endif #${USE_PERL5_STRING:L} != "yes"
.endif # !defined(_POSTMKINCLUDED) && !defined(Perl_Pre_Include)
.if defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include)
Perl_Post_Include= bsd.perl.mk
.if defined(_PERL_REFACTORING_COMPLETE)
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
PERL_VER=${PERL_VER} \
PERL_ARCH=${PERL_ARCH} \
SITE_PERL=${SITE_PERL_REL}
.endif # defined(_PERL_REFACTORING_COMPLETE)
.if defined(PERL_MODBUILD)
PERL_CONFIGURE= yes
CONFIGURE_SCRIPT?= Build.PL
.if ${PORTNAME} != Module-Build
BUILD_DEPENDS+= ${SITE_PERL}/Module/Build.pm:${PORTSDIR}/devel/p5-Module-Build
.endif
ALL_TARGET?=
PL_BUILD?= Build
CONFIGURE_ARGS+= \
create_packlist=0 \
install_path=lib="${PREFIX}/${SITE_PERL_REL}" \
install_path=arch="${PREFIX}/${SITE_PERL_REL}/${PERL_ARCH}" \
install_path=script="${PREFIX}/bin" \
install_path=bin="${PREFIX}/bin" \
install_path=libdoc="${MAN3PREFIX}/man/man3" \
install_path=bindoc="${MAN1PREFIX}/man/man1"
.elif defined(PERL_CONFIGURE)
CONFIGURE_ARGS+= INSTALLDIRS="site"
.endif # defined(PERL_MODBUILD)
.if defined(PERL_CONFIGURE)
USE_PERL5= yes
.if defined(BATCH) && !defined(IS_INTERACTIVE)
CONFIGURE_ENV+= PERL_MM_USE_DEFAULT="YES"
.endif # defined(BATCH) && !defined(IS_INTERACTIVE)
.endif # defined(PERL_CONFIGURE)
.if defined(USE_PERL5) || defined(USE_PERL5_BUILD)
EXTRACT_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
PATCH_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
BUILD_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if defined(USE_PERL5) || defined(USE_PERL5_RUN)
RUN_DEPENDS+= ${PERL5}:${PORTSDIR}/lang/${PERL_PORT}
.endif
.if defined(PERL_CONFIGURE)
CONFIGURE_ARGS+= CC="${CC}" CCFLAGS="${CFLAGS}" PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib" INSTALLARCHLIB="${PREFIX}/lib"
CONFIGURE_SCRIPT?= Makefile.PL
MAN3PREFIX?= ${PREFIX}/lib/perl5/${PERL_VERSION}
.undef HAS_CONFIGURE
.endif # defined(PERL_CONFIGURE)
.if defined(PERL_CONFIGURE)
.if !target(do-configure)
# XXX MCL had to duplicate the first block; implies more refactoring needed
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
@cd ${CONFIGURE_WRKSRC} && \
${SETENV} ${CONFIGURE_ENV} \
${PERL5} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
.if !defined(PERL_MODBUILD)
@cd ${CONFIGURE_WRKSRC} && \
${PERL5} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
.endif # !defined(PERL_MODBUILD)
.endif # !target(do-configure)
.endif # defined(PERL_CONFIGURE)
.if defined(PERL_MODBUILD)
.if !target(do-build)
do-build:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${ALL_TARGET})
.endif # !target(do-build)
.if !defined(USE_GMAKE)
.if !target(do-install)
do-install:
@(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PERL5} ${PL_BUILD} ${MAKE_ARGS} ${INSTALL_TARGET})
.endif # !target(do-install)
.endif # !defined(USE_GMAKE)
.endif # defined(PERL_MODBUILD)
.endif # defined(_POSTMKINCLUDED) && !defined(Perl_Post_Include)
Reference in a new issue View git blame Copy permalink