kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/Mk/bsd.linux-rpm.mk
Alexander Leidinger 435ea2a95a Re-commit of 
64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions (incl. EXP runs by
      antoine)
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with the new 64 bit parts
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (antoine after some EXP-runs)
2015-08-09 19:14:13 +00:00

195 lines
6.1 KiB
Makefile
Raw Blame History

#-*- tab-width: 4; -*-
# ex:ts=4
#
# $FreeBSD$
#
# Variables:
# LINUX_DIST - Will be used to set some dist-specific presets.
# Valid values: fedora
# LINUX_DIST_VER - Use depends upon the dist-specific presets.
# Valid values for "fedora": all version numbers
# e.g. 10 for fedora 10
# Valid values for "centos": all version numbers
# e.g. 6.6 for centos 6.6
# This is used to set MASTER_SITE_{,SRC_}SUBDIR
# if it isn't already set.
# MASTER_SITE_SRC_SUBDIR
# - The subdir for the src RPM's.
# DISTFILES - For simple cases this will be set automatically
# based upon the DISTNAME.
# SRC_DISTFILES - Variable which contains the corresponding src RPM's.
# If there's no corresponding src RPM, it has to be
# set to the empty value (SRC_DISTFILES= "").
# AUTOMATIC_PLIST - Generate a dynamic plist (please have a look at the
# porters handbook section which talks about plists.
# This feature is reserved for rare cases).
# BRANDELF_DIRS - A list of directories with executables to brand
# as a linux executable. The directories has to not
# contain libraries.
# BRANDELF_FILES - A list of files to brand as a linux executable in
# case BRANDELF_DIRS can't be used.
.if !defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Pre_Include)
Linux_RPM_Include_MAINTAINER= emulation@FreeBSD.org
Linux_RPM_Pre_Include= bsd.linux-rpm.mk
EXTRACT_SUFX?= .${LINUX_RPM_ARCH}.rpm
SRC_SUFX?= .src.rpm
USE_LINUX?= yes
USE_LINUX_PREFIX= yes
NO_WRKSUBDIR= yes
NO_BUILD= yes
. if ${USE_LINUX} == "c6" || ${USE_LINUX} == "yes" # default to CentOS
# Do not build CentOS 6 ports if overridden by f10
. if defined(OVERRIDE_LINUX_BASE_PORT) && ${OVERRIDE_LINUX_NONBASE_PORTS} == "f10"
IGNORE= This port requires CentOS ${LINUX_DIST_VER}. Please remove OVERRIDE_LINUX_NONBASE_PORTS=f10 in /etc/make.conf.
. endif
. endif
.endif
.if defined(_POSTMKINCLUDED) && !defined(Linux_RPM_Post_Include)
Linux_RPM_Post_Include= bsd.linux-rpm.mk
.if ${USE_LINUX} == "f10"
USE_LINUX?= "f10"
LINUX_DIST= fedora
LINUX_DIST_VER= 10
.else # default to CentOS
LINUX_DIST= centos
LINUX_DIST_VER= 6.6
.endif
.if defined(LINUX_DIST)
DIST_SUBDIR?= rpm/${LINUX_RPM_ARCH}/${LINUX_DIST}/${LINUX_DIST_VER}
. if ${LINUX_DIST} == "fedora"
# we do not want to define MASTER_SITES and MASTER_SITE_* if they are already defined
# ex.: MASTER_SITES=file:///...
. ifndef MASTER_SITES
MASTER_SITES= ${MASTER_SITE_FEDORA_LINUX}
. if ${LINUX_DIST_VER} == 10
MASTER_SITE_SUBDIR?= ../releases/${LINUX_DIST_VER}/Everything/${LINUX_RPM_ARCH}/os/Packages \
../updates/${LINUX_DIST_VER}/${LINUX_RPM_ARCH}
MASTER_SITE_SRC_SUBDIR?= ../releases/${LINUX_DIST_VER}/Everything/source/SRPMS \
../updates/${LINUX_DIST_VER}/SRPMS
. else
MASTER_SITE_SUBDIR?= ${LINUX_DIST_VER}/${LINUX_RPM_ARCH}/os/Fedora/RPMS \
updates/${LINUX_DIST_VER}/${LINUX_RPM_ARCH}
MASTER_SITE_SRC_SUBDIR?= ${LINUX_DIST_VER}/SRPMS \
updates/${LINUX_DIST_VER}/SRPMS
. endif
. endif
. elif ${LINUX_DIST} == "centos"
MASTER_SITES?= ${MASTER_SITE_CENTOS_LINUX} ${MASTER_SITE_CENTOS_LINUX_UPDATES}
MASTER_SITE_SUBDIR?= centos/${LINUX_DIST_VER}/os/${LINUX_REPO_ARCH}/Packages/ \
centos/${LINUX_DIST_VER}/updates/${LINUX_REPO_ARCH}/Packages/
. if ${LINUX_DIST_VER} == "5" #needed for Qt...
LINUX_RPM_ARCH= i386
MASTER_SITE_SUBDIR= centos/5/os/i386/Packages/
. endif
. if defined(PACKAGE_BUILDING)
MASTER_SITES+= http://vault.centos.org/%SUBDIR%/:SOURCE
MASTER_SITE_SUBDIR+= ${LINUX_DIST_VER}/os/Source/SPackages/:SOURCE
. endif
. endif
.endif
PKGNAMEPREFIX?= linux-${USE_LINUX}-
# DISTFILES and SRC_DISTFILES assume that there is only one bindist
# and one src file.
# Please, define them in the Makefile of the port in case this assumption
# is not true.
DISTVERSION= ${PORTVERSION}-${RPMVERSION}
DISTNAME?= ${PORTNAME}-${DISTVERSION}
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
BIN_DISTFILES:= ${DISTFILES}
SRC_DISTFILES?= ${DISTNAME}${SRC_SUFX}:SOURCE
EXTRACT_ONLY?= ${BIN_DISTFILES:C/:[^:]+$//}
. if defined(PACKAGE_BUILDING)
DISTFILES+= ${SRC_DISTFILES}
MASTER_SITE_SUBDIR+= ${MASTER_SITE_SRC_SUBDIR}
ALWAYS_KEEP_DISTFILES= yes
. endif
.if !defined(USE_LINUX_RPM_BAD_PERMS)
EXTRACT_CMD?= ${TAR}
EXTRACT_BEFORE_ARGS?= --no-same-permissions --no-same-owner -xf
EXTRACT_AFTER_ARGS?=
.else
EXTRACT_DEPENDS+= rpm2archive:${PORTSDIR}/archivers/rpm4
EXTRACT_CMD?= rpm2archive
EXTRACT_BEFORE_ARGS?= <
EXTRACT_AFTER_ARGS?= | ${TAR} xf - --no-same-permissions --no-same-owner
.endif
DISTINFO_FILE?= ${MASTERDIR}/distinfo.${LINUX_RPM_ARCH}
BRANDELF_DIRS?=
BRANDELF_FILES?=
# For ports that define PORTDOCS, be sure not to install
# documentation if NOPORTDOCS is defined
. if defined(PORTDOCS) && defined(NOPORTDOCS)
pre-patch: linux-rpm-clean-portdocs
. if !target(linux-rpm-clean-portdocs)
linux-rpm-clean-portdocs:
. for x in ${PORTDOCS}
@${RM} -f ${WRKDIR}/${DOCSDIR_REL}/${x}
. endfor
@${RMDIR} ${WRKDIR}/${DOCSDIR_REL}
. endif
. endif
. if ${USE_LINUX} != "f10"
PLIST?= ${MASTERDIR}/pkg-plist.${LINUX_RPM_ARCH}
. endif
. if defined(AUTOMATIC_PLIST)
. if ${USE_LINUX} == "f10"
_LINUX_BASE_SUFFIX= f10
. elif ${USE_LINUX} == "c6" || ${USE_LINUX} == "yes"
_LINUX_BASE_SUFFIX= c6
. elif ${USE_LINUX} == "c6_64
_LINUX_BASE_SUFFIX= c6
. else
# other linux_base ports do not provide a pkg-plist file
IGNORE= uses AUTOMATIC_PLIST with an unsupported USE_LINUX, \"${USE_LINUX}\". Supported values are \"yes\", \"f10\", \"c6\", and \"c6_64\"
. endif
PLIST?= ${WRKDIR}/.PLIST.linux-rpm
pre-install: linux-rpm-generate-plist
. if !target(linux-rpm-generate-plist)
linux-rpm-generate-plist:
cd ${WRKSRC} && \
${FIND} * ! -path "stage/*" ! -type d | ${SORT} > ${PLIST}
. endif
. endif
. if !target(do-install)
do-install:
. if ${BRANDELF_DIRS}
@cd ${WRKSRC} && ${FIND} ${BRANDELF_DIRS} -type f -print0 \
| ${XARGS} -0 ${FILE} | ${GREP} ELF | ${CUT} -d : -f 1 \
| ${XARGS} ${BRANDELF} -t Linux
. endif
. if ${BRANDELF_FILES}
@cd ${WRKSRC} && ${BRANDELF} -t Linux ${BRANDELF_FILES}
. endif
cd ${WRKSRC} && ${FIND} * ! -path "stage*" -type d -exec ${MKDIR} "${STAGEDIR}${PREFIX}/{}" \;
cd ${WRKSRC} && ${FIND} * ! -path "stage/*" ! -type d | ${CPIO} -pm -R root:wheel ${STAGEDIR}${PREFIX}
. endif
.endif
Reference in a new issue View git blame Copy permalink