freebsd-ports/editors/openoffice.org-3/Makefile
Maho Nakata e4ab6030f0 OpenOffice -> OpenOffice.org
Submitted by:	Pavel@Janik.cz (Pavel Janik)
2003-11-09 14:11:29 +00:00

580 lines
19 KiB
Makefile

# New ports collection makefile for: OpenOffice.org
# Date created: 28 Februar 2002
# Whom: Martin Blapp
#
# $FreeBSD$
#
PORTNAME= openoffice
PORTVERSION= 1.1.0
PORTREVISION= 1
CATEGORIES+= editors
MASTER_SITES+= ftp://openofficeorg.secsup.org/pub/software/openoffice/stable/%SUBDIR%/ \
ftp://sunsite.cnlab-switch.ch/mirror/OpenOffice.org/stable/%SUBDIR%/ \
${MASTER_SITE_RINGSERVER:S,%SUBDIR%,misc/openoffice/stable/&,} \
http://www.binarycode.org/openoffice/stable/%SUBDIR%/ \
http://ftp.gwdg.de/pub/misc/openoffice/stable/%SUBDIR%/ \
ftp://ftp.cs.man.ac.uk/pub/toby/gpc/:gpc \
http://ftp.services.openoffice.org/pub/OpenOffice.org/contrib/helpcontent/:help \
http://people.freebsd.org/~mbr/ooo/:moz
MASTER_SITE_SUBDIR= ${PORTVERSION}
DISTFILES+= OOo_${PORTVERSION}_source.tar.bz2 gpc231.tar.Z:gpc \
patch-openoffice-mozilla101-2002-10-14:moz mozilla-vendor-1.0.2a.tgz:moz
.if defined(L10NHELP)
DISTFILES+= ${L10NHELP:S/$/:help/}
.endif
SORT?= /usr/bin/sort
FIND?= /usr/bin/find
CUT?= /usr/bin/cut
AWK?= /usr/bin/awk
GREP?= /usr/bin/grep
ZIP?= ${PREFIX}/bin/zip
UNZIP?= ${PREFIX}/bin/unzip
ANT?= ${LOCALBASE}/bin/ant
TCSH?= /bin/tcsh
PASTE?= /usr/bin/paste
.include <bsd.port.pre.mk>
BUILD_NR= 645
RELEASE_NR= 1.1
FRELEASE_NR= 1.1.0
INSTALLATION_BASEDIR= OpenOffice.org${FRELEASE_NR}
DIST_SUBDIR= openoffice1.1
DICT_DIR= ${PREFIX}/${INSTALLATION_BASEDIR}/share/dict/ooo/
#
# configuration for language specific slave ports
#
.if !defined(LANG_EXT)
LANG_EXT=01
.else
#
# Add pkg-descr and pkg-message if available
#
.if exists(${.CURDIR}/pkg-descr)
DESCR= ${.CURDIR}/pkg-descr
.endif
.if exists(${.CURDIR}/pkg-message)
PKGMESSAGE= ${.CURDIR}/pkg-message
.endif
#
# Set prefix and suffix
#
.if defined(LANG_PKGNAME)
PKGNAMEPREFIX= ${LANG_PKGNAME}-
.if defined(LANG_SUFFIX)
PKGNAMESUFFIX= -${LANG_SUFFIX}
.endif
.endif # if defined(LANG_PKGNAME)
#
# LANG_CONFIGURE_ARG is missing for the german port
#
.if defined(LANG_EXT)
CONFIGURE_ARGS+= --with-lang=${LANG_CONFIGURE_ARG},ENUS
.endif
.endif
.if !defined (LANG) && !defined(USE_LANG)
USE_LANG= en_US.ISO8859-15
LANG_LIST= en_US.ISO8859-15 en_US.ISO8859-1 US-ASCII
.else
.if !defined(USE_LANG)
USE_LANG= ${LANG}
.endif
.endif
LANG_SORTED=`${ECHO} ${LANG_LIST} | ${TR} " " "\n" | ${PASTE} -d " " - -`
.if ${OSVERSION} < 500000
# OOo requires gcc 3.3 (not systems's gcc)
BUILD_DEPENDS+= gcc33:${PORTSDIR}/lang/gcc33
USE_GCC=3.3 # make no sense yet
CC= gcc33
CXX= g++33
.endif
EXTRACT_ONLY= OOo_${PORTVERSION}_source.tar.bz2
MAINTAINER= openoffice@FreeBSD.org
.if !defined(COMMENT)
COMMENT= Integrated wordprocessor/dbase/spreadheet/drawing/chart/browser
.endif
#
# The JDK dependency needs to be at the first place, so all
# following dependencies use the same JDK.
#
BUILD_DEPENDS+= ${JAVAVM}:${PORTSDIR}/java/jdk14
BUILD_DEPENDS+= zip:${PORTSDIR}/archivers/zip
BUILD_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip
BUILD_DEPENDS+= ${ANT}:${PORTSDIR}/devel/apache-ant
BUILD_DEPENDS+= ${X11BASE}/lib/libgdk-x11-2.0.so:${PORTSDIR}/x11-toolkits/gtk20
BUILD_DEPENDS+= ${X11BASE}/lib/libX11.so:${PORTSDIR}/x11/XFree86-4-libraries
BUILD_DEPENDS+= ${X11BASE}/lib/libXft.so:${PORTSDIR}/x11-fonts/Xft
.if !defined(DISPLAY)
BUILD_DEPENDS+= Xvfb:${PORTSDIR}/x11-servers/XFree86-4-VirtualFramebufferServer
.endif
LIB_DEPENDS= jpeg.9:${PORTSDIR}/graphics/jpeg \
png.5:${PORTSDIR}/graphics/png \
mng.1:${PORTSDIR}/graphics/libmng \
freetype.9:${PORTSDIR}/print/freetype2
USE_PERL5= yes
USE_BZIP2= yes
USE_BISON= yes
USE_GMAKE= yes
USE_GNOME= orbit gtk12
EXTRACT_BEFORE_ARGS_R= -dc
EXTRACT_AFTER_ARGS_R= | ${TAR} -xf -
EXTRACT_CMD_R= ${GZIP_CMD}
EXTRACT_REST= gpc231.tar.Z
JDKDIR?= ${LOCALBASE}/jdk1.4.1
JAVAVM= ${JDKDIR}/bin/java
GNU_CONFIGURE= yes
USE_AUTOCONF= yes
WANT_AUTOCONF_VER= 253
WRKDIR= ${WRKDIRPREFIX}${.CURDIR}/work
WRKSRC= ${WRKDIR}/oo_${RELEASE_NR}_src/config_office
LD_PATH1= ${WRKSRC}/../vos/unxfbsd.pro/lib/:${WRKSRC}/../ucbhelper/unxfbsd.pro/lib/
LD_PATH= ${LD_PATH1}:${WRKSRC}/../solver/${BUILD_NR}/unxfbsd.pro/lib/
.if defined(WITH_DEBUG)
CFLAGS+= -g
.if ${WITH_DEBUG} == 2
BUILD= dmake debug="true"
.else
BUILD= dmake
.endif
.else
BUILD= dmake strip="true"
.endif
.if !defined(DISPLAY)
DISPLAYHACK=localhost:1001
.endif
CONFIGURE_ENV= PTHREAD_CFLAGS=${PTHREAD_CFLAGS} \
PTHREAD_LIBS=${PTHREAD_LIBS}
CONFIGURE_ARGS+= --with-jdk-home=${JDKDIR}
.if defined(WITH_DEBUG)
.if ${WITH_DEBUG} == 2
CONFIGURE_ARGS+= --enable-debug
.endif
.endif
pre-fetch:
@${ECHO}
.if !defined(LANG)
@${ECHO} "REQUIREMENTS:"
@${ECHO}
@${ECHO} "OO requires that the ENV variable LANG"
@${ECHO} "is set to a proper value. Dependent on"
@${ECHO} "which language port you use, OO does"
@${ECHO} "automatically set LANG to a suitable"
@${ECHO} "value. You can change this with:"
@${ECHO}
@${ECHO} "USE_LANG=\"preferred language\""
@${ECHO}
@${ECHO} "and set a different language"
@${ECHO} "like:"
@${ECHO}
@${ECHO} "${LANG_SORTED}"
@${ECHO}
@${ECHO} "Your current setting is:"
@${ECHO}
@${ECHO} "USE_LANG=${USE_LANG}"
@${ECHO}
@${ECHO}
.endif
@${ECHO} "OPTIONS:"
.if !defined(USE_GCC)
@${ECHO}
@${ECHO} "You can compile OO with different"
@${ECHO} "gcc compiler versions:"
@${ECHO}
@${ECHO} "Add USE_GCC=2.95 or USE_GCC=3.2"
@${ECHO} "to compile openoffice with your"
@${ECHO} "preferred compiler."
.endif
.if !defined(WITH_DEBUG)
@${ECHO}
@${ECHO} "You can compile OO with debug symbols"
@${ECHO} "if you call make with WITH_DEBUG=1"
@${ECHO}
@${ECHO} "If you set WITH_DEBUG=2, you add internal"
@${ECHO} "OO.org debug support."
@${ECHO}
.endif
.if !defined(WITH_TTF_BYTECODE_ENABLED)
@${ECHO}
@${ECHO} "You may set WITH_TTF_BYTECODE_ENABLED=YES"
@${ECHO} "if you like to use the Freetype library to"
@${ECHO} "render TTF fonts. Normally the TTF lib is"
@${ECHO} "not used to render fonts."
@${ECHO}
@${ECHO} "If you have licensed the Apple patents"
@${ECHO} "US05155805 US05159668 and US05325479"
@${ECHO} "you can enable this option to get better"
@${ECHO} "quality of glyphs at small bitmap sizes."
@${ECHO}
.endif
.if !defined(WITH_GIF_LZW_COMPRESSION)
@${ECHO}
@${ECHO} "You may set WITH_GIF_LZW_COMPRESSION=YES"
@${ECHO} "If you want to make compressed gif images"
@${ECHO}
@${ECHO} "If must have license from the Unisys and IBM patents"
@${ECHO} "to enable this option to get compressed GIF images."
@${ECHO}
.endif
.if ${OSVERSION} < 450002
@${ECHO}
@${ECHO} "OS-VERSION ${OSVERSION} too low"
@${ECHO}
@${ECHO} "OO need some important libc_r and"
@${ECHO} "gcc fixes to build. Please upgrade to 4.6"
@${ECHO} "RELEASE or 4.6 STABLE."
@${FALSE}
.endif
@${ECHO}
@${ECHO} "NOTICE:"
@${ECHO}
@${ECHO} "To build Openoffice, you should have a lot"
.if defined(WITH_DEBUG)
@${ECHO} "of free diskspace (~ 8GB)."
.else
@${ECHO} "of free diskspace (~ 4GB)."
.endif
@${ECHO}
.if (defined(USE_GCC) && ${USE_GCC} == 2.95) || \
(${OSVERSION} < 500000 && !defined(USE_GCC))
@${ECHO} "KERNEL CONFIGURATION:"
@${ECHO}
@${ECHO} "Openoffice needs a larger stack- and"
@${ECHO} "datasize to build. Check your limit"
@${ECHO} "settings and and put this in /boot/loader.conf"
@${ECHO} "if neccessary:"
@${ECHO}
@${ECHO} "kern.maxdsiz=\"1073741824\""
@${ECHO} "kern.maxssiz=\"268435456\""
.endif
@${ECHO}
.if ${OSVERSION} < 460002
@${ECHO} "REQUIRED SYSTEM PATCHES:"
@${ECHO}
.endif
.if ${OSVERSION} < 500000
@${ECHO} "OO.org can crash if you enter a non existing path"
@${ECHO} "or URL in the location bar. To fix these crashes"
@${ECHO} "you need a uncommitted system patch for rtld:"
@${ECHO}
@${ECHO} "http://people.freebsd.org/~mbr/ooo/rtld-symlookup.diff"
@${ECHO}
.endif
.if ${OSVERSION} < 460001
@${ECHO}
@${ECHO} "OO setup is broken on STABLE < 4.6"
@${ECHO} "including 4.6 RELEASE."
@${ECHO} "You'll need a system patch to solve"
@${ECHO} "this problem:"
@${ECHO}
@${ECHO} "http://people.freebsd.org/~mbr/ooo/rtld-alloca.diff"
@${ECHO}
.endif
.if ${OSVERSION} < 460002
@${ECHO}
@${ECHO} "OO.org soffice binary can deadlock. You can work around"
@${ECHO} "this problem with this patch:"
@${ECHO}
@${ECHO} "http://people.freebsd.org/~mbr/ooo/rtld-deadlock.diff"
@${ECHO}
.endif
.if ${OSVERSION} < 500000
@${ECHO}
@${ECHO} "OO.org build can deadlock in regmerge. You can work around"
@${ECHO} "this problem with this patch:"
@${ECHO}
@${ECHO} "http://people.freebsd.org/~mbr/ooo/rtld-builddeadlock.diff"
@${ECHO}
.endif
.if !exists(/usr/include/langinfo.h)
@${ECHO}
@${ECHO} "langinfo.h is missing !"
@${ECHO}
@${ECHO} "Please upgrade to 4.6 RELEASE or"
@${ECHO} "4.6 STABLE."
@${ECHO}
@${FALSE}
.endif
post-extract:
@for file in ${EXTRACT_REST}; do \
if ! (cd ${WRKDIR} && ${EXTRACT_CMD_R} \
${EXTRACT_BEFORE_ARGS_R} \
${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS_R}) ; \
then \
exit 1; \
fi \
done
@${CP} ${WRKDIR}/gpc231/gpc.c ${WRKSRC}/../external/gpc/
@${CP} ${WRKDIR}/gpc231/gpc.h ${WRKSRC}/../external/gpc/
@${MAKE} extract-mozilla
@-${RM} -f ${WRKSRC}/../moz/zipped/*.zip
@${CHMOD} +x ${WRKSRC}/../solenv/bin/zipdep.pl
.if defined(L10NHELP)
@${ECHO_MSG} "===> Extracting L10NHELP sub project"
@${MKDIR} ${WRKDIR}/L10NHELP
@cd ${WRKDIR}/L10NHELP && \
${TAR} -xzf ${DISTDIR}/${DIST_SUBDIR}/${L10NHELP}
.endif
post-patch:
@${MAKE} patch-mozilla
@${MAKE} fix-kdewrappers
@${MAKE} fix-gnomewrappers
.if defined(WITH_TTF_BYTECODE_ENABLED)
@if [ "`echo ${PATCHDIR}/optpatch-*`" != "${PATCHDIR}/optpatch-*" ]; then \
${ECHO_MSG} "===> Applying additional TTF bytecode patches for ${PKGNAME}" ; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patch ${PATCHDIR}/optpatch-freetype::patch" ; \
fi; \
${PATCH} ${PATCH_ARGS} < ${PATCHDIR}/optpatch-freetype+patch ; \
fi
.endif
.if !defined(WITH_GIF_LZW_COMPRESSION)
@if [ "`echo ${PATCHDIR}/gifpatch-*`" != "${PATCHDIR}/gifpatch-*" ]; then \
${ECHO_MSG} "===> Removing GIF LZW compression for ${PKGNAME}" ; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying GIF LZW compression ${OPSYS} patch" ; \
fi; \
${PATCH} ${PATCH_ARGS} < ${PATCHDIR}/gifpatch-goodies+source+filter.vcl+egif+giflzwc.cxx ; \
${PATCH} ${PATCH_ARGS} < ${PATCHDIR}/gifpatch-goodies+source+filter.vcl+egif+giflzwc_disabled.cxx ; \
${PATCH} ${PATCH_ARGS} < ${PATCHDIR}/gifpatch-goodies+source+filter.vcl+egif+makefile.mk ; \
fi
.endif
.if defined(WITH_DEBUG)
@if [ "`echo ${PATCHDIR}/debugpatch-*`" != "${PATCHDIR}/debugpatch-*" ]; then \
${ECHO_MSG} "===> Applying additional debug ${OPSYS} patches for ${PKGNAME}" ; \
PATCHES_APPLIED="" ; \
for i in ${PATCHDIR}/debugpatch-*; do \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
;; \
*) \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
fi; \
if ${PATCH} ${PATCH_ARGS} < $$i ; then \
PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
else \
${ECHO_MSG} `${ECHO_CMD} ">> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
if [ x"$$PATCHES_APPLIED" != x"" ]; then \
${ECHO_MSG} `${ECHO_CMD} ">> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
fi; \
${FALSE} ; \
fi; \
;; \
esac; \
done; \
fi;
.endif
@${ECHO_MSG} "===> Find old malloc.h defines and fix them in ${PKGNAME} source"
@${FIND} ${WRKSRC}/.. | ${EGREP} "\.(cxx|h|c)$$" | ${XARGS} \
${PERL} -pi -e "s|<malloc.h>|<stdlib.h>|g"
fix-kdewrappers:
# @${PERL} -pi -e 's|"Exec", "\\"\<progpath\>/program/|"Exec", "\\"${PREFIX}/bin/openoffice_${RELEASE_NR}-|' \
# ${WRKSRC}/../sysui/oounix/office/kde2/kdeint
fix-gnomewrappers:
# @${PERL} -pi -e 's|"Exec", "<progpath>/program/|"Exec", "${PREFIX}/bin/openoffice_${RELEASE_NR}-|' \
# ${WRKSRC}/../sysui/oounix/office/gnome/gnomeint
extract-mozilla:
.if ! exists(${WRKDIR}/mozilla/Makefile)
@${ECHO_MSG} "===> Extracting mozilla sub project"
@cd ${WRKDIR} && tar -xzf ${DISTDIR}/${DIST_SUBDIR}/mozilla-vendor-1.0.2a.tgz
.endif
@cd ${WRKDIR}/mozilla && ${MAKE} extract WRKDIRPREFIX=""
patch-mozilla:
@${CP} ${DISTDIR}/${DIST_SUBDIR}/patch-openoffice-mozilla101-2002-10-14 \
${WRKDIR}/mozilla/files/
@cd ${WRKDIR}/mozilla && ${MAKE} patch WRKDIRPREFIX=""
build-mozilla:
.if ! exists(${WRKDIR}/FREEBSDGCCIruntime.zip)
@${ECHO_MSG} "===> Building mozilla sub project"
.if defined(WITH_DEBUG)
@${CP} ${WRKDIR}/mozilla/Makefile ${WRKDIR}/mozilla/Makefile.new
@${SED} -e 's|--disable-debug||' \
-e 's|--disable-cpp-rtti||' \
-e 's|--enable-strip||' \
< ${WRKDIR}/mozilla/Makefile.new > ${WRKDIR}/mozilla/Makefile
.endif
.if defined(USE_GCC)
@cd ${WRKDIR}/mozilla && ${MAKE} CXX=${CXX} CC=${CC} CFLAGS="${CFLAGS}" USE_GCC=${USE_GCC} build WRKDIRPREFIX=""
.else
@cd ${WRKDIR}/mozilla && ${MAKE} CFLAGS="${CFLAGS}" build WRKDIRPREFIX=""
.endif
@${CP} ${FILESDIR}/zipmoz.sh ${WRKDIR}
@${CHMOD} 755 ${WRKDIR}/zipmoz.sh
@${WRKDIR}/zipmoz.sh ${WRKDIR}/mozilla/work/mozilla/dist FREEBSDGCCI ${WRKDIR}
.endif
install-mozilla:
@${CP} ${WRKDIR}/FREEBSDGCCIinc.zip ${WRKSRC}/../moz/zipped/
@${CP} ${WRKDIR}/FREEBSDGCCIlib.zip ${WRKSRC}/../moz/zipped/
@${CP} ${WRKDIR}/FREEBSDGCCIruntime.zip ${WRKSRC}/../moz/zipped/
register-mozilla:
.if exists(${WRKDIR}/mozilla-runtime)
@${RM} -rf ${WRKDIR}/mozilla-runtime
.endif
@${MKDIR} ${WRKDIR}/mozilla-runtime
@cd ${WRKDIR}/mozilla-runtime && ${UNZIP} -o ${WRKDIR}/FREEBSDGCCIruntime.zip
@cd ${WRKDIR}/mozilla-runtime && ${UNZIP} -o ${WRKDIR}/FREEBSDGCCIlib.zip
@${CP} ${WRKDIR}/mozilla/work/mozilla/dist/bin/regxpcom ${WRKDIR}/mozilla-runtime/
@-${RM} ${WRKDIR}/mozilla-runtime/components/component.reg
@cd ${WRKDIR}/mozilla-runtime && export MOZILLA_FIVE_HOME=. \
&& export LD_LIBRARY_PATH=.:./lib && ./regxpcom
@${CP} ${WRKDIR}/mozilla-runtime/components/xpti.dat \
${WRKDIR}/mozilla-runtime/components/xptitemp.dat
@${RM} ${WRKDIR}/FREEBSDGCCIruntime.zip ${WRKDIR}/mozilla-runtime/regxpcom
@cd ${WRKDIR}/mozilla-runtime && ${FIND} . -type f \
| ${ZIP} ${WRKDIR}/FREEBSDGCCIruntime.zip -@
mozilla:
@${MAKE} extract-mozilla
@${MAKE} patch-mozilla
@${MAKE} build-mozilla
@${MAKE} register-mozilla
@${MAKE} install-mozilla
do-build:
.if ! exists(${WRKSRC}/../moz/zipped/FREEBSDGCCIruntime.zip)
.if ! exists(${WRKSRC}/../moz/zipped/FREEBSDGCCIlib.zip)
.if ! exists(${WRKSRC}/../moz/zipped/FREEBSDGCCIinc.zip)
@${MAKE} mozilla
.endif
.endif
.endif
.if exists(${WRKDIR}/.Xvfb.pid)
@-${CAT} ${WRKDIR}/.Xvfb.pid | ${XARGS} kill
@${RM} -f ${WRKDIR}/.Xvfb.pid
.endif
.if !defined(DISPLAY)
#
# This is a UGLY hack to not have to specify a X-Display.
#
${X11BASE}/bin/Xvfb :1001 -screen 0 800x600x24 > /dev/null 2>&1 & ${ECHO} $$! > ${WRKDIR}/.Xvfb.pid
@sleep 5
.endif
@cd ${WRKSRC}/.. && PATH="${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin" ./bootstrap
.if defined(L10NHELP)
@${MKDIR} ${WRKSRC}/../solver/${BUILD_NR}/unxfbsd.pro/pck
@${CP} ${WRKDIR}/L10NHELP/*.zip ${WRKSRC}/../solver/${BUILD_NR}/unxfbsd.pro/pck
.endif
.if !defined(DISPLAY)
@cd ${WRKSRC}/.. && DISPLAY=${DISPLAYHACK} PATH="${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin" && \
${TCSH} -c 'source FreeBSDEnv.Set && unsetenv TOP && ${BUILD}'
@-${CAT} ${WRKDIR}/.Xvfb.pid | ${XARGS} kill
@${RM} -f ${WRKDIR}/.Xvfb.pid
.else
@cd ${WRKSRC}/.. && DISPLAY=${DISPLAY} PATH="${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin" && \
${TCSH} -c 'source FreeBSDEnv.Set && unsetenv TOP && ${BUILD}'
.endif
.if defined(LANG_PKGNAME)
@cd ${WRKSRC}/.. && PATH="${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin" && \
${TCSH} -c 'source FreeBSDEnv.Set && unsetenv TOP && cd instsetoo/util && ${BUILD} LANGEXT=${LANG_EXT}'
.endif
pre-install:
@${CP} ${FILESDIR}/oo_setup.resp \
${WRKSRC}/../instsetoo/unxfbsd.pro/${LANG_EXT}/normal/
@${SED} -i orig -e 's#%%PREFIX%%#${PREFIX}#g' \
-e 's#%%FRELEASE_NR%%#${FRELEASE_NR}#g' \
${WRKSRC}/../instsetoo/unxfbsd.pro/${LANG_EXT}/normal/oo_setup.resp
@${MKDIR} -p ${WRKSRC}/../solver/${BUILD_NR}/unxfbsd.pro/bin/${LANG_EXT}/osl/
do-install:
.if !defined(DISPLAY)
#
# UGLY hack to not have to specify a X-Display.
#
${X11BASE}/bin/Xvfb :1001 -screen 0 800x600x24 > /dev/null 2>&1 & ${ECHO} $$! > ${WRKDIR}/.Xvfb.pid
@sleep 5
@-SAL_IGNOREXERRORS=1 PATH="/bin:${PATH}" LD_LIBRARY_PATH=${LD_PATH} \
TEMP=${WRKDIR} DISPLAY=${DISPLAYHACK} \
${WRKSRC}/../instsetoo/*.pro/${LANG_EXT}/normal/setup -r:oo_setup.resp
@-${CAT} ${WRKDIR}/.Xvfb.pid | ${XARGS} kill
@${RM} -f ${WRKDIR}/.Xvfb.pid
.else
@-SAL_IGNOREXERRORS=1 PATH="/bin:${PATH}" LD_LIBRARY_PATH=${LD_PATH} \
TEMP=${WRKDIR} DISPLAY=${DISPLAY} \
${WRKSRC}/../instsetoo/*.pro/${LANG_EXT}/normal/setup -r:oo_setup.resp
.endif
install-user:
@-SAL_IGNOREXERRORS=1 PATH="/bin:${PATH}" \
${PREFIX}/${INSTALLATION_BASEDIR}/program/setup
post-install:
@${ECHO_MSG} "===> Add wrapper scripts";
@${CP} ${FILESDIR}/openoffice-wrapper ${WRKDIR}/
@${CP} ${FILESDIR}/freebsd-local.sh ${WRKDIR}/
@${SED} -i orig -e 's#%%PREFIX%%#${PREFIX}#g' \
-e 's#%%LANG%%#${USE_LANG}#g' \
-e 's#%%BUILD_NR%%#${BUILD_NR}#g' \
-e 's#%%RELEASE_NR%%#${RELEASE_NR}#g' \
-e 's#%%FRELEASE_NR%%#${FRELEASE_NR}#g' \
${WRKDIR}/openoffice-wrapper \
${WRKDIR}/freebsd-local.sh
@${INSTALL_SCRIPT} ${WRKDIR}/openoffice-wrapper \
${PREFIX}/bin/openoffice-${RELEASE_NR}
@${INSTALL_SCRIPT} ${WRKDIR}/freebsd-local.sh \
${PREFIX}/${INSTALLATION_BASEDIR}/program/freebsd-local.sh
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-sagenda
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-scalc
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-sdraw
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-setup
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-sfax
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-smath
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-simpress
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-spadmin
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-sweb
@${LN} -fs ${PREFIX}/bin/openoffice-${RELEASE_NR} ${PREFIX}/bin/openoffice-${RELEASE_NR}-swriter
@cd ${PREFIX} && ${FIND} -s bin -type f | ${GREP} openoffice-${RELEASE_NR} > ${TMPPLIST}
@cd ${PREFIX} && ${FIND} -s bin -type l | ${GREP} openoffice-${RELEASE_NR} >> ${TMPPLIST}
@cd ${PREFIX} && ${FIND} -s ${INSTALLATION_BASEDIR} -type f >> ${TMPPLIST}
@cd ${PREFIX} && ${FIND} -s ${INSTALLATION_BASEDIR} -type l >> ${TMPPLIST}
@cd ${PREFIX} && ${FIND} -s ${INSTALLATION_BASEDIR} -type d > ${WRKDIR}/dir.tmp
@${SORT} -r ${WRKDIR}/dir.tmp | ${XARGS} -n 1 ${ECHO_CMD} @dirrm >> ${TMPPLIST}
package-rename:
@${ECHO_MSG} "===> Rename package for OO.org mirror upload";
.if defined(LANG_SUFFIX)
@${MV} ${WRKDIR}/../${PKGNAMEPREFIX}openoffice-${LANG_SUFFIX}-${PORTVERSION}_${PORTREVISION}.tbz2 \
${WRKDIR}/../OOo_${PORTVERSION}_${OPSYS}Intel_install_${LANG_PKGNAME}-${LANG_SUFFIX}.tbz2
.else
@${MV} ${WRKDIR}/../${PKGNAMEPREFIX}openoffice-${PORTVERSION}_${PORTREVISION}.tbz2 \
${WRKDIR}/../OOo_${PORTVERSION}_${OPSYS}Intel_install_${LANG_PKGNAME}.tbz2
.endif
update:
@${MAKE} fetch
@${MAKE} extract
@cd ${WRKSRC}/.. && for dir in *; do \
if [ -d $$dir ]; then \
cd $$dir; cvs update -d; cd ..; \
fi \
done
.include <bsd.port.post.mk>