kpriv/freebsd-ports
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
freebsd-ports/Mk/bsd.ruby.mk
Stanislav Sedov ef38fc3bb8 - Don't build ruby with threads support on FreeBSD versions before 7.2 
- On FreeBSD >= 7.2 allocate the new thread with adequate amount of stack
  space to run the main ruby code in.  This allows to mitigate problem
  when too low stack space available for ruby when running with pthreads
  enabled.
- Bump portrevision.

The long version.  Before this change we used to link ruby against pthreads
uncoditionally on all versions of FreeBSD.  This is indispensable in order
to load the threaded shared objects withing ruby.  However, this causes a
dramatic decrease in the stack space available as pthreads only allows
up to several megabytes of stack space for the main application threads.
The only solution to this is to create the new thread immediately after
the program start with rigth stack size attributes set.  Nonetheless this
scheme won't work for us on FreeBSD version before 7.2 as malloc implementation
in these versions was not threaded fork safe (i.e. this is impossible to
fork from the threaded program and expect malloc/free functions to work).
Thus the only solution for now can be to disable pthreads entirely on
FreeBSD <= 7.2.  This won't cause any performance/usability problems for
users as Ruby 1.8 uses green threads, however it may prevent <= 7.2
users to load shared libraries linked agains pthreads.

Reported by:	"François Montel" <seanmullen@gmail.com>
Tested by:	Sean Mullen <seanmullen@gmail.com>
2009-10-12 13:15:50 +00:00

593 lines
18 KiB
Makefile
Raw Blame History

#
# bsd.ruby.mk - Utility definitions for Ruby related ports.
#
# Created by: Akinori MUSHA <knu@FreeBSD.org>
#
# $FreeBSD$
#
.if !defined(Ruby_Include)
Ruby_Include= bsd.ruby.mk
Ruby_Include_MAINTAINER= stas@FreeBSD.org
#
# [variables that a user may define]
#
# RUBY_VER - (See below)
# RUBY_DEFAULT_VER - Set to (e.g.) "1.8" if you want to refer to "ruby18"
# just as "ruby".
# RUBY_ARCH - (See below)
# RUBY_RD_HTML - Define if you want HTML files generated from RD files.
#
#
# [variables that each port can define]
#
# RUBY - Set to full path of ruby. If you set this, the values
# of the following variables are automatically obtained
# from the ruby executable: RUBY_VER, RUBY_VERSION,
# RUBY_NAME, RUBY_ARCH, RUBY_LIBDIR, RUBY_ARCHLIBDIR,
# RUBY_SITELIBDIR, and RUBY_SITEARCHLIBDIR.
# RUBY_VER - Set to the alternative short version of ruby in the
# form of `x.y' (see below for current value).
# USE_RUBY - Says that the port uses ruby for building and running.
# RUBY_NO_BUILD_DEPENDS - Says that the port should not build-depend on ruby.
# RUBY_NO_RUN_DEPENDS - Says that the port should not run-depend on ruby.
# USE_LIBRUBY - Says that the port uses libruby.
# USE_RUBY_EXTCONF - Says that the port uses extconf.rb to configure.
# Implies USE_RUBY.
# RUBY_EXTCONF - Set to the alternative name of extconf.rb
# (default: extconf.rb).
# RUBY_EXTCONF_SUBDIRS - Set to list of subdirectories, if multiple modules
# are included.
# USE_RUBY_SETUP - Says that the port uses setup.rb to configure and
# build.
# RUBY_SETUP - Set to the alternative name of setup.rb
# (default: setup.rb).
# USE_RUBY_AMSTD - Says that the port uses amstd for building and
# running.
# USE_RUBY_RDTOOL - Says that the port uses rdtool to generate documents.
# USE_RUBY_RDOC - Says that the port uses rdoc to generate documents.
# USE_RUBY_FEATURES - Says that the port requires some of the following
# features for building and/or running (default: none):
# iconv
# RUBY_REQUIRE - Set to a Ruby expression to evaluate before building
# the port. The constant "Ruby" is set to the integer
# version number of ruby, and the result of the
# expression will be set to RUBY_PROVIDED, which is
# left undefined if the result is nil, false or a
# zero-length string. Implies USE_RUBY.
# RUBY_SHEBANG_FILES - Specify the files which shebang lines you want to fix.
# RUBY_RD_FILES - Specify the RD files which you want to generate HTML
# documents from. If this is defined and not empty,
# USE_RUBY_RDTOOL is implied and RUBY_RD_HTML_FILES is
# defined.
# USE_RUBYGEMS - Says that the port uses rubygems packaging system.
# RUBYGEM_AUTOPLIST - Generate packing list for rubygems based port
# automatically.
#
#
# [variables that each port should not (re)define]
#
# RUBY_PKGNAMEPREFIX - Common PKGNAMEPREFIX for ruby ports
# (default: ruby${RUBY_SUFFIX}-)
# RUBY_VERSION - Full version of ruby without preview/beta suffix in
# the form of `x.y.z' (see below for current value).
# RUBY_VERSION_CODE - Full integer version of ruby without preview/beta
# suffix in the form of `xyz'.
# RUBY_PORTVERSION - PORTVERSION for the standard ruby ports (ruby,
# ruby-gdbm, etc.).
# RUBY_PORTREVISION - PORTREVISION for the standard ruby ports.
# RUBY_PORTEPOCH - PORTEPOCH for the standard ruby ports.
# RUBY_DISTNAME - DISTNAME for the standard ruby ports, i.e. the
# basename of the ruby distribution tarball.
# RUBY_DISTVERSION - The version number part of RUBY_DISTNAME.
# RUBY_PATCHFILES - PATCHFILES for the standard ruby ports, i.e. the
# basename of the ruby distribution tarball.
# RUBY_WRKSRC - WRKSRC for the ruby port.
# MASTER_SITE_SUBDIR_RUBY - MASTER_SITE_SUBDIR for the ruby distfiles.
#
# RUBY_SHLIBVER - Major version of libruby (see below for current
# value).
# RUBY_ARCH - Set to target architecture name.
# (e.g. i386-freebsd7)
# RUBY_SUFFIX - Suffix for ruby binaries and directories
# (${RUBY_VER:S/.//}).
# RUBY_WITHOUT_SUFFIX - Always ${LOCALBASE}/bin/ruby.
# RUBY_WITH_SUFFIX - Always ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}.
# RUBY_NAME - Ruby's name with trailing suffix.
#
# RUBY_MODNAME - Set to the module name (default: ${PORTNAME}).
#
# RUBY_RD2 - Full path of rd2 executable.
# RUBY_RDOC - Full path of rdoc executable.
#
# RUBY_BASE_PORT - Port path of base ruby without PORTSDIR, without
# suffix except version.
# RUBY_PORT - Port path of ruby without PORTSDIR.
# RUBY_AMSTD_PORT - Port path of ruby-amstd without PORTSDIR.
# RUBY_RDTOOL_PORT - Port path of rdtool without PORTSDIR.
# RUBY_RDOC_PORT - Port path of rdoc without PORTSDIR.
# RUBY_ICONV_PORT - Port path of ruby-iconv without PORTSDIR.
#
# DEPEND_LIBRUBY - LIB_DEPENDS entry for libruby.
# DEPEND_RUBY - BUILD_DEPENDS/RUN_DEPENDS entry for ruby.
# DEPEND_RUBY_AMSTD - BUILD_DEPENDS/RUN_DEPENDS entry for ruby-amstd.
# DEPEND_RUBY_RDTOOL - BUILD_DEPENDS entry for rdtool.
# DEPEND_RUBY_RDOC - BUILD_DEPENDS entry for rdoc.
# DEPEND_RUBY_ICONV - BUILD_DEPENDS/RUN_DEPENDS entry for ruby-iconv.
#
# RUBY_LIBDIR - Installation path for architecture independent
# libraries.
# RUBY_ARCHLIBDIR - Installation path for architecture dependent
# libraries.
# RUBY_SITELIBDIR - Installation path for site architecture independent
# libraries.
# RUBY_SITEARCHLIBDIR - Installation path for site architecture dependent
# libraries.
# RUBY_DOCDIR - Installation path for documents.
# RUBY_EXAMPLESDIR - Installation path for examples.
# RUBY_RIDIR - Installation path for site architecture independent ri
# documents.
# RUBY_SITERIDIR - Installation path for site architecture dependent ri
# documents.
# RUBY_MODDOCDIR - Installation path for the module's documents.
# RUBY_MODEXAMPLESDIR - Installation path for the module's examples.
# RUBY_ELISPDIR - Installation path for emacs lisp files.
#
RUBY_DEFAULT_VER?= 1.8
RUBY_VER?= ${RUBY_DEFAULT_VER}
.if defined(RUBY)
.if !exists(${RUBY})
IGNORE= cannot install: you set the variable RUBY to "${RUBY}", but it does not seem to exist. Please specify an already installed ruby executable.
.endif
_RUBY_TEST!= ${RUBY} -e 'begin; require "rbconfig"; rescue LoadError; puts "error"; end'
.if !empty(_RUBY_TEST)
IGNORE= cannot install: you set the variable RUBY to "${RUBY}", but it failed to include rbconfig. Please specify a properly installed ruby executable.
.endif
_RUBY_CONFIG= ${RUBY} -r rbconfig -e 'C = Config::CONFIG' -e
RUBY_VERSION!= ${_RUBY_CONFIG} 'puts VERSION'
RUBY_SUFFIX?= # empty
RUBY_ARCH!= ${_RUBY_CONFIG} 'puts C["target"]'
RUBY_NAME!= ${_RUBY_CONFIG} 'puts C["ruby_install_name"]'
_RUBY_SYSLIBDIR!= ${_RUBY_CONFIG} 'puts C["libdir"]'
_RUBY_SITEDIR!= ${_RUBY_CONFIG} 'puts C["sitedir"]'
_RUBY_VENDORDIR!= ${_RUBY_CONFIG} 'puts C["vendordir"]'
.else
RUBY?= ${LOCALBASE}/bin/${RUBY_NAME}
.if defined(RUBY_VER)
. if ${RUBY_VER} == 1.8
#
# Ruby 1.8
#
RUBY_RELVERSION= 1.8.7
RUBY_PORTREVISION= 5
RUBY_PORTEPOCH= 1
RUBY_PATCHLEVEL= 160
. if ${RUBY_PATCHLEVEL} == 0
RUBY_VERSION?= ${RUBY_RELVERSION}
RUBY_DISTVERSION?= ${RUBY_RELVERSION}
. else
RUBY_VERSION?= ${RUBY_RELVERSION}.${RUBY_PATCHLEVEL}
RUBY_DISTVERSION?= ${RUBY_RELVERSION}-p${RUBY_PATCHLEVEL}
. endif
# Security patch
RUBY_PATCHFILES?= ${RUBY_VERSION}-patch1.gz
RUBY_WRKSRC= ${WRKDIR}/ruby-${RUBY_DISTVERSION}
#
# PLIST_SUB helpers
#
RUBY18= ""
RUBY19= "@comment "
. elif ${RUBY_VER} == 1.9
#
# Ruby 1.9
#
RUBY_RELVERSION= 1.9.1
RUBY_PORTREVISION= 1
RUBY_PORTEPOCH= 1
RUBY_PATCHLEVEL= 129
RUBY_VERSION?= ${RUBY_RELVERSION}.${RUBY_PATCHLEVEL}
RUBY_DISTVERSION?= ${RUBY_RELVERSION}-p${RUBY_PATCHLEVEL}
RUBY_WRKSRC= ${WRKDIR}/ruby-${RUBY_DISTVERSION}
RUBY_CONFIGURE_ARGS+= --with-rubyhdrdir="${PREFIX}/include/ruby-1.9/"
#
# PLIST_SUB helpers
#
RUBY18= "@comment "
RUBY19= ""
. else
#
# Other versions
#
IGNORE= Only ruby 1.8 and 1.9 are supported
. endif
.endif # defined(RUBY_VER)
CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL:C/\..*//}
RUBY_ARCH?= ${ARCH}-freebsd${OSREL:C/\..*//}
RUBY_NAME?= ruby${RUBY_SUFFIX}
_RUBY_SYSLIBDIR?= ${PREFIX}/lib
_RUBY_SITEDIR?= ${_RUBY_SYSLIBDIR}/ruby/site_ruby
_RUBY_VENDORDIR?= ${_RUBY_SYSLIBDIR}/ruby/vendor_ruby
.endif
# defined(RUBY)
RUBY_DEFAULT_SUFFIX?= ${RUBY_DEFAULT_VER:S/.//}
RUBY_DISTVERSION?= ${RUBY_VERSION}
RUBY_PORTVERSION?= ${RUBY_VERSION}
MASTER_SITE_SUBDIR_RUBY?= ${RUBY_VER}
RUBY_DISTNAME?= ruby-${RUBY_DISTVERSION}
RUBY_WRKSRC?= ${WRKDIR}/${RUBY_DISTNAME}
RUBY_VERSION_CODE?= ${RUBY_VERSION:S/.//g}
RUBY_VER= ${RUBY_VERSION:C/([[:digit:]]+\.[[:digit:]]+).*/\1/}
RUBY_SUFFIX= ${RUBY_VER:S/.//}
RUBY_WITHOUT_SUFFIX?= ${LOCALBASE}/bin/ruby
RUBY_WITH_SUFFIX?= ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}
RUBY_PKGNAMEPREFIX?= ruby${RUBY_SUFFIX}-
RUBY_SHLIBVER?= ${RUBY_VER:S/.//}
RUBY_CONFIGURE_ARGS+= --program-prefix=""
DEPENDS_ARGS+= RUBY_VER="${RUBY_VER}"
RUBY_CONFIGURE_ARGS+= --program-suffix="${RUBY_SUFFIX}"
RUBY_MODNAME?= ${PORTNAME}
# Commands
RUBY_RD2?= ${LOCALBASE}/bin/rd2
RUBY_RDOC?= ${LOCALBASE}/bin/rdoc
# Ports
RUBY_BASE_PORT?= lang/ruby${RUBY_VER:S/.//}
RUBY_PORT?= ${RUBY_BASE_PORT}
RUBY_AMSTD_PORT?= devel/ruby-amstd
RUBY_RDTOOL_PORT?= textproc/ruby-rdtool
RUBY_RDOC_PORT?= textproc/ruby-rdoc
RUBY_ICONV_PORT?= converters/ruby-iconv
# Depends
DEPEND_LIBRUBY?= ${RUBY_NAME}.${RUBY_SHLIBVER}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY?= ${RUBY}:${PORTSDIR}/${RUBY_PORT}
DEPEND_RUBY_AMSTD?= ${RUBY_SITELIBDIR}/amstd/version.rb:${PORTSDIR}/${RUBY_AMSTD_PORT}
DEPEND_RUBY_RDTOOL?= ${RUBY_RD2}:${PORTSDIR}/${RUBY_RDTOOL_PORT}
DEPEND_RUBY_ICONV= ${RUBY_ARCHLIBDIR}/iconv.so:${PORTSDIR}/${RUBY_ICONV_PORT}
# Directories
RUBY_LIBDIR?= ${_RUBY_SYSLIBDIR}/ruby/${RUBY_VER}
RUBY_ARCHLIBDIR?= ${RUBY_LIBDIR}/${RUBY_ARCH}
RUBY_SITELIBDIR?= ${_RUBY_SITEDIR}/${RUBY_VER}
RUBY_SITEARCHLIBDIR?= ${RUBY_SITELIBDIR}/${RUBY_ARCH}
RUBY_VENDORLIBDIR?= ${_RUBY_VENDORDIR}/${RUBY_VER}
RUBY_VENDORARCHLIBDIR?= ${RUBY_VENDORLIBDIR}/${RUBY_ARCH}
RUBY_DOCDIR?= ${PREFIX}/share/doc/${RUBY_NAME}
RUBY_EXAMPLESDIR?= ${PREFIX}/share/examples/${RUBY_NAME}
RUBY_RIDIR?= ${PREFIX}/share/ri/${RUBY_VER}/system
RUBY_SITERIDIR?= ${PREFIX}/share/ri/${RUBY_VER}/site
RUBY_MODDOCDIR?= ${RUBY_DOCDIR}/${RUBY_MODNAME}
RUBY_MODEXAMPLESDIR?= ${RUBY_EXAMPLESDIR}/${RUBY_MODNAME}
RUBY_ELISPDIR?= ${PREFIX}/lib/ruby/elisp
# PLIST
PLIST_RUBY_DIRS= RUBY_LIBDIR="${RUBY_LIBDIR}" \
RUBY_ARCHLIBDIR="${RUBY_ARCHLIBDIR}" \
RUBY_SITELIBDIR="${RUBY_SITELIBDIR}" \
RUBY_SITEARCHLIBDIR="${RUBY_SITEARCHLIBDIR}" \
RUBY_VENDORLIBDIR="${RUBY_VENDORLIBDIR}" \
RUBY_VENDORARCHLIBDIR="${RUBY_VENDORARCHLIBDIR}" \
RUBY_MODDOCDIR="${RUBY_MODDOCDIR}" \
RUBY_MODEXAMPLESDIR="${RUBY_MODEXAMPLESDIR}" \
RUBY_DOCDIR="${RUBY_DOCDIR}" \
RUBY_EXAMPLESDIR="${RUBY_EXAMPLESDIR}" \
RUBY_RIDIR="${RUBY_RIDIR}" \
RUBY_SITERIDIR="${RUBY_SITERIDIR}" \
RUBY_ELISPDIR="${RUBY_ELISPDIR}"
PLIST_SUB+= ${PLIST_RUBY_DIRS:C,DIR="(${LOCALBASE}|${PREFIX})/,DIR=",} \
RUBY_VERSION="${RUBY_VERSION}" \
RUBY_VER="${RUBY_VER}" \
RUBY_SHLIBVER="${RUBY_SHLIBVER}" \
RUBY_ARCH="${RUBY_ARCH}" \
RUBY_SUFFIX="${RUBY_SUFFIX}" \
RUBY_NAME="${RUBY_NAME}" \
RUBY_DEFAULT_SUFFIX="${RUBY_DEFAULT_SUFFIX}" \
RUBY18=${RUBY18} \
RUBY19=${RUBY19}
# require check
.if defined(RUBY_REQUIRE)
USE_RUBY= yes
.if exists(${RUBY})
RUBY_PROVIDED!= ${RUBY} -e '\
Ruby = ${RUBY_VERSION_CODE}; \
value = begin; ${RUBY_REQUIRE}; end and puts value'
.else
RUBY_PROVIDED= "should be" # the latest version is going to be installed
.endif
.if empty(RUBY_PROVIDED)
.undef RUBY_PROVIDED
.endif
.endif
# fix shebang lines
.if defined(RUBY_SHEBANG_FILES) && !empty(RUBY_SHEBANG_FILES)
USE_RUBY= yes
post-patch: ruby-shebang-patch
ruby-shebang-patch:
@cd ${WRKSRC}; for f in ${RUBY_SHEBANG_FILES}; do \
${ECHO_MSG} "===> Fixing the #! line of $$f"; \
TMPFILE=`mktemp -t rubyshebang`; \
cp $$f $$TMPFILE; \
${AWK} 'BEGIN {flag = 0;} \
{ \
if (flag == 0) { \
if ($$0 ~ /^#!/) { \
sub(/#!(.*\/)?(env[[:space:]]+)?ruby/, "#!${RUBY}", $$0);\
print $$0; \
} \
else { \
print "#!${RUBY}"; \
print $$0; \
} \
flag = 1; \
} else { \
print $$0; \
} \
}' $$TMPFILE > $$f; \
rm -f $$TMPFILE; \
done
.endif
.if defined(DEBUG)
RUBY_FLAGS+= -d
.endif
#
# RubyGems support
#
.if defined(USE_RUBYGEMS)
. if ${RUBY_VER} == 1.8
BUILD_DEPENDS+= ${RUBYGEMBIN}:${PORTSDIR}/devel/ruby-gems
RUN_DEPENDS+= ${BUILD_DEPENDS}
. endif
PKGNAMEPREFIX?= rubygem-
EXTRACT_SUFX= .gem
EXTRACT_ONLY=
DIST_SUBDIR= rubygem
NO_BUILD= yes
GEMS_BASE_DIR= lib/ruby/gems/${RUBY_VER}
GEMS_DIR= ${GEMS_BASE_DIR}/gems
DOC_DIR= ${GEMS_BASE_DIR}/doc
CACHE_DIR= ${GEMS_BASE_DIR}/cache
SPEC_DIR= ${GEMS_BASE_DIR}/specifications
GEM_NAME?= ${PORTNAME}-${PORTVERSION}
GEM_LIB_DIR?= ${GEMS_DIR}/${GEM_NAME}
GEM_DOC_DIR?= ${DOC_DIR}/${GEM_NAME}
GEM_SPEC?= ${SPEC_DIR}/${GEM_NAME}.gemspec
GEM_CACHE?= ${CACHE_DIR}/${GEM_NAME}.gem
PLIST_SUB+= PORTVERSION="${PORTVERSION}" \
REV="${RUBY_GEM}" \
GEMS_BASE_DIR="lib/ruby/gems/${RUBY_VER}" \
GEMS_DIR="${GEMS_DIR}" \
DOC_DIR="${DOC_DIR}" \
CACHE_DIR="${CACHE_DIR}" \
SPEC_DIR="${SPEC_DIR}" \
PORT="${PORTNAME}-${PORTVERSION}" \
GEM_NAME="${GEM_NAME}" \
GEM_LIB_DIR="${GEM_LIB_DIR}" \
GEM_DOC_DIR="${GEM_DOC_DIR}" \
GEM_SPEC="${GEM_SPEC}" \
GEM_CACHE="${GEM_CACHE}" \
EXTRACT_SUFX="${EXTRACT_SUFX}"
RUBYGEMBIN= ${LOCALBASE}/bin/gem${RUBY_VER:S/.//}
. if defined(DISTFILES)
GEMFILES= ${DISTFILES:C/:[^:]+$//}
. else
GEMFILES= ${DISTNAME}${EXTRACT_SUFX}
. endif
do-install:
.for _D in ${GEMFILES}
${SETENV} ${GEM_ENV} ${RUBYGEMBIN} install -l --no-update-sources --no-ri --install-dir ${PREFIX}/lib/ruby/gems/${RUBY_VER} ${DISTDIR}/${DIST_SUBDIR}/${_D} -- --build-args ${CONFIGURE_ARGS}
.endfor
. if defined(RUBYGEM_AUTOPLIST)
. if !target(post-install-script)
post-install-script:
@${ECHO} ${GEM_CACHE} >> ${TMPPLIST}
@${ECHO} ${GEM_SPEC} >> ${TMPPLIST}
@${FIND} -ds ${PREFIX}/${GEM_DOC_DIR} -type f -print | ${SED} -E -e \
's,^${PREFIX}/?,,' >> ${TMPPLIST}
@${FIND} -ds ${PREFIX}/${GEM_DOC_DIR} -type d -print | ${SED} -E -e \
's,^${PREFIX}/?,@dirrm ,' >> ${TMPPLIST}
@${FIND} -ds ${PREFIX}/${GEM_LIB_DIR} -type f -print | ${SED} -E -e \
's,^${PREFIX}/?,,' >> ${TMPPLIST}
@${FIND} -ds ${PREFIX}/${GEM_LIB_DIR} -type d -print | ${SED} -E -e \
's,^${PREFIX}/?,@dirrm ,' >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/${GEMS_DIR} 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/${DOC_DIR} 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/${CACHE_DIR} 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/${SPEC_DIR} 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/${GEMS_BASE_DIR} 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/lib/ruby/gems 2>/dev/null || true" >> ${TMPPLIST}
@${ECHO_CMD} "@unexec rmdir %D/lib/ruby 2>/dev/null || true" >> ${TMPPLIST}
. endif
. endif
.endif # USE_RUBYGEMS
#
# extconf.rb support
#
.if defined(USE_RUBY_EXTCONF)
USE_RUBY= yes
RUBY_EXTCONF?= extconf.rb
CONFIGURE_ARGS+= --with-opt-dir="${LOCALBASE}"
do-configure: ruby-extconf-configure
ruby-extconf-configure:
.if defined(RUBY_EXTCONF_SUBDIRS)
.for d in ${RUBY_EXTCONF_SUBDIRS}
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} in ${d} to configure"
@cd ${CONFIGURE_WRKSRC}/${d}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endfor
.else
@${ECHO_MSG} "===> Running ${RUBY_EXTCONF} to configure"
@cd ${CONFIGURE_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
.endif
.endif
#
# setup.rb support
#
.if defined(USE_RUBY_SETUP)
RUBY_SETUP?= setup.rb
do-configure: ruby-setup-configure
ruby-setup-configure:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to configure"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} config ${CONFIGURE_ARGS}
do-build: ruby-setup-build
ruby-setup-build:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to build"
@cd ${BUILD_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} setup
do-install: ruby-setup-install
ruby-setup-install:
@${ECHO_MSG} "===> Running ${RUBY_SETUP} to install"
@cd ${INSTALL_WRKSRC}; \
${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} install
.endif
.if defined(USE_LIBRUBY)
LIB_DEPENDS+= ${DEPEND_LIBRUBY}
.endif
.if defined(USE_RUBY)
.if !defined(RUBY_NO_BUILD_DEPENDS)
EXTRACT_DEPENDS+= ${DEPEND_RUBY}
PATCH_DEPENDS+= ${DEPEND_RUBY}
BUILD_DEPENDS+= ${DEPEND_RUBY}
.endif
.if !defined(RUBY_NO_RUN_DEPENDS)
RUN_DEPENDS+= ${DEPEND_RUBY}
.endif
.endif
.if defined(USE_RUBY_FEATURES)
_use= ${USE_RUBY_FEATURES:Miconv}
.if !empty(_use)
BUILD_DEPENDS+= ${DEPEND_RUBY_ICONV}
RUN_DEPENDS+= ${DEPEND_RUBY_ICONV}
.endif
.undef _use
.endif
.if defined(USE_RAKE)
. if ${RUBY_VER} == 1.8
BUILD_DEPENDS+= ${LOCALBASE}/bin/rake:${PORTSDIR}/devel/rubygem-rake
RAKE_BIN= ${LOCALBASE}/bin/rake
. else
RAKE_BIN= ${LOCALBASE}/bin/${RUBY_VER:S/.//}
. endif
.endif
.if defined(USE_RUBY_AMSTD)
BUILD_DEPENDS+= ${DEPEND_RUBY_AMSTD}
RUN_DEPENDS+= ${DEPEND_RUBY_AMSTD}
.endif
# documents
RUBY_NO_RD_HTML= yes
.if defined(RUBY_RD_HTML)
.undef RUBY_NO_RD_HTML
.endif
.if defined(NOPORTDOCS)
RUBY_NO_RD_HTML= yes
.endif
.if defined(RUBY_RD_FILES) && !defined(RUBY_NO_RD_HTML)
USE_RUBY_RDTOOL= yes
RUBY_RD_HTML_FILES= ${RUBY_RD_FILES:S/.rb$//:S/.rd././:S/.rd$//:S/$/.html/}
PLIST_SUB+= RUBY_RD_HTML_FILES=""
pre-install: ruby-rd-build
ruby-rd-build:
.if !empty(RUBY_RD_FILES)
@${ECHO_MSG} "===> Generating HTML documents from RD documents"
@cd ${WRKSRC}; for rd in ${RUBY_RD_FILES}; do \
html=$$(echo $$rd | ${SED} 's/\.rb$$//;s/\.rd\././;s/\.rd$$//').html; \
${ECHO_MSG} "${RUBY_RD2} $$rd > $$html"; \
${RUBY_RD2} $$rd > $$html; \
done
.else
@${DO_NADA}
.endif
.else
RUBY_RD_HTML_FILES= # empty
PLIST_SUB+= RUBY_RD_HTML_FILES="@comment "
.endif
.if !defined(NOPORTDOCS) && defined(USE_RUBY_RDTOOL)
BUILD_DEPENDS+= ${DEPEND_RUBY_RDTOOL}
.endif
.endif
Reference in a new issue View git blame Copy permalink