freebsd-ports/net/ntp-rc/Makefile.inc
2013-05-02 20:48:08 +00:00

160 lines
3.8 KiB
Makefile

# $FreeBSD: /tmp/pcvs/ports/net/ntp-rc/Makefile.inc,v 1.2 2011-11-27 20:04:08 cy Exp $
OPTIONS_DEFINE= NTPSNMPD \
SSL \
IPV6 \
NTP_SIGND \
BANCOMM \
GPSVME \
ACTS \
ARBITER \
ARCRON_MSF \
AS2201 \
ATOM \
CHRONOLOG \
CHU \
AUDIO_CHU \
DATUM \
DUMBCLOCK \
FG \
HEATH \
HOPFSERIAL \
HOPFPCI \
HPGPS \
IRIG \
JJY \
JUPITER \
LEITCH \
LOCAL_CLOCK \
MX4200 \
NEOCLOCK4X \
NMEA \
ONCORE \
PALISADE \
PCF \
PST \
RIPENCC \
SHM \
SPECTRACOM \
TRUETIME \
ULINK \
WWV \
ZYFER \
COMPUTIME \
DCF7000 \
HOPF6021 \
MEINBERG \
RAWDCF \
RCC8000 \
SCHMID \
TRIMTAIP \
TRIMTSIP \
WHARTON \
VARITEXT
OPTIONS_DEFAULT= SSL \
NTP_SIGND \
ATOM \
NMEA
NTPSNMPD_DESC= Build and install ntpsnmpd
NTP_SIGND_DESC= Enable signed NTP
BANCOMM_DESC= Enable Datum/Bancomm bc635/VME interface
GPSVME_DESC= Enable TrueTime GPS receiver/VME interface
ACTS_DESC= Enable ACTS modem service
ARBITER_DESC= Enable Arbiter 1088A/B GPS receiver
ARCRON_MSF_DESC= Enable Arcron MSF receiver
AS2201_DESC= Enable Austron 2200A/2201A GPS receiver
ATOM_DESC= Enable ATOM PPS interface
CHRONOLOG_DESC= Enable Chrono-log K-series WWVB receiver
CHU_DESC= Enable CHU modem/decoder
AUDIO_CHU_DESC= Enable CHU audio/decoder
DATUM_DESC= Enable Datum Programmable Time System
DUMBCLOCK_DESC= Enable Dumb generic hh:mm:ss local clock
FG_DESC= Enable Forum Graphic GPS
HEATH_DESC= Enable Heath GC-1000 WWV/WWVH receiver
HOPFSERIAL_DESC= Enable hopf serial clock device
HOPFPCI_DESC= Enable hopf 6039 PCI board
HPGPS_DESC= Enable HP 58503A GPS receiver
IRIG_DESC= Enable IRIG audio decoder
JJY_DESC= Enable JJY receiver
JUPITER_DESC= Enable Rockwell Jupiter GPS receiver
LEITCH_DESC= Enable Leitch CSD 5300 Master Clock
LOCAL_CLOCK_DESC= Enable local clock reference
MX4200_DESC= Enable Magnavox MX4200 GPS receiver
NEOCLOCK4X_DESC= Enable NeoClock4X DCF77 / TDF receiver
NMEA_DESC= Enable NMEA GPS receiver
ONCORE_DESC= Enable Motorola VP/UT Oncore GPS receiver
PALISADE_DESC= Enable Palisade clock
PCF_DESC= Enable Conrad parallel port radio clock
PST_DESC= Enable PST/Traconex 1020 WWV/WWVH receiver
RIPENCC_DESC= Enable RIPENCC specific Trimble driver
SHM_DESC= Enable SHM clock attached thru shared memory
SPECTRACOM_DESC= Enable Spectracom 8170/Netclock/2 WWVB
TRUETIME_DESC= Enable Kinemetrics/TrueTime receivers
ULINK_DESC= Enable Ultralink WWVB receiver
WWV_DESC= Enable WWV Audio receiver
ZYFER_DESC= Enable Zyfer GPStarplus receiver
COMPUTIME_DESC= Enable Diem Computime Radio Clock
DCF7000_DESC= Enable ELV/DCF7000 clock
HOPF6021_DESC= Enable HOPF 6021 clock
MEINBERG_DESC= Enable Meinberg clocks
RAWDCF_DESC= Enable DCF77 raw time code
RCC8000_DESC= Enable RCC 8000 clock
SCHMID_DESC= Enable Schmid DCF77 clock
TRIMTAIP_DESC= Enable Trimble GPS receiver/TAIP protocol
TRIMTSIP_DESC= Enable Trimble GPS receiver/TSIP protocol
WHARTON_DESC= Enable WHARTON 400A Series clock
VARITEXT_DESC= Enable VARITEXT clock
# Not supported by FreeBSD: TPRO Enable KSI/Odetics TPRO/S GPS receiver/IRIG
# XXX Broken under FreeBSD: TT560 Enable TrueTime 560 IRIG-B decoder
NTP_DRIVERS= \
BANCOMM \
GPSVME \
ACTS \
ARBITER \
ARCRON_MSF \
AS2201 \
ATOM \
CHRONOLOG \
CHU \
AUDIO_CHU \
DATUM \
DUMBCLOCK \
FG \
HEATH \
HOPFSERIAL \
HOPFPCI \
HPGPS \
IRIG \
JJY \
JUPITER \
LEITCH \
LOCAL_CLOCK \
MX4200 \
NEOCLOCK4X \
NMEA \
ONCORE \
PALISADE \
PCF \
PST \
RIPENCC \
SHM \
SPECTRACOM \
TRUETIME \
ULINK \
WWV \
ZYFER \
COMPUTIME \
DCF7000 \
HOPF6021 \
MEINBERG \
RAWDCF \
RCC8000 \
SCHMID \
TRIMTAIP \
TRIMTSIP \
WHARTON \
VARITEXT