161 lines
4.3 KiB
Text
161 lines
4.3 KiB
Text
Asterisk Open PBC/IVR Project using the Sangoma A101 and A102 cards
|
|
===================================================================
|
|
|
|
Alex Feldman: Aug 10 2005
|
|
Nenad Corbic:
|
|
|
|
WANPIPE supports the Asterisk Open PBX/IVR project through an interface
|
|
of the Zaptel family of hardware devices. These devices share a common
|
|
driver suite, called the ZAPATA Telephony Driver Suite (zaptel).
|
|
|
|
|
|
ASTERISK / ZAPTEL Installation
|
|
-------------------------------
|
|
|
|
First install:
|
|
zaptel, and asterisk software on your system.
|
|
|
|
The Zaptel module can be installed using one of the following methods:
|
|
|
|
1. You can use ports collection or packages method of installation if you
|
|
want to install the latest stable release:
|
|
# cd /usr/ports/misc/zaptel/
|
|
# make install
|
|
|
|
2. You can also use nightly snapshot from sn repository
|
|
(http://www.portaone.com/~gonzo/zaptel-bsd-trunk.tar.gz).
|
|
|
|
3. Subvestion repository: https://svn.bluezbox.repos/zaptel-bsd
|
|
svn co --username svn --password svn https://svn.bluezbox.com/repos/zaptel-bsd
|
|
|
|
The Asterisk application can be installed from ports collection:
|
|
# cd /usr/ports/net/asterisk
|
|
# make install
|
|
|
|
|
|
|
|
WANPIPE Releases
|
|
----------------
|
|
|
|
2.8.2-1: Latest Wanpipe Release
|
|
|
|
o First version of Sangoma driver for FreeBSD OS that
|
|
support Asterisk/Zaptel interface (AFT-A101/A102/A104 cards Only)
|
|
|
|
|
|
|
|
WANPIPE Installation for Asterisk
|
|
---------------------------------
|
|
|
|
1. Download the LATEST Wanpipe 2.8.2 Release or Greater!
|
|
|
|
Note: Wanpipe does not support Asterisk in releases
|
|
LOWER than 2.8.2!
|
|
|
|
ftp.sangoma.com/FreeBSD/current_wanpipe
|
|
|
|
|
|
2. Install WANPIPE package
|
|
|
|
eg: pkg_add wanpipe-2.8.2-1.tgz
|
|
|
|
|
|
Proceed with default installation options.
|
|
|
|
IMPORTANT:
|
|
Under compilation mode: select CUSTOM
|
|
|
|
Then select: DEF :for default protocols
|
|
TDM :for TDM Voice asterisk support
|
|
|
|
Proceed to compile wanpipe drivers.
|
|
|
|
4. To confirm successful installation run:
|
|
|
|
wanrouter hwprobe
|
|
|
|
Confirm that Sangoma cards have been found.
|
|
|
|
Note:
|
|
Zaptel kernel drivers must be compiled and installed
|
|
BEFORE loading WANPIPE drivers.
|
|
|
|
|
|
WANPIPE Configuration for the A100 series of cards
|
|
--------------------------------------------------
|
|
|
|
You can use the A101/A102 or A104 cards for both data and voice.
|
|
The following describes how to configure the Asterisk system for
|
|
voice, with an auxiliary data interface, if needed.
|
|
|
|
1. Run the configuration utility wancfg.
|
|
|
|
/usr/sbin/wancfg
|
|
|
|
Hardware Setup:
|
|
Select Hardware: AFT
|
|
|
|
T1/E1 CSU/DSU Setup can be configured via
|
|
"Advanced Physical Medium Config"
|
|
|
|
Protocol Setup:
|
|
Select Protocol: TDM VOICE
|
|
No other options
|
|
|
|
Interface Setup:
|
|
Select: SPAN Number: 1-24
|
|
The SPAN usually starts with 1
|
|
|
|
Select: Override Asterisk Echo Enable
|
|
Default: NO
|
|
|
|
This optoin will DISABLE/Override Asterisk
|
|
ECHO Cancellation Cfg for this SPAN.
|
|
|
|
Therefore, if you want to DISABLE Echo Cancellation
|
|
for this SPAN, ie: ignore what is configured in
|
|
zapata.conf, then set this option to YES.
|
|
|
|
Used in switching applications where single SPAN
|
|
needs echo cancellation and rest do not. Therefore,
|
|
one would use this option to disable ECHO
|
|
cancellation on SPANS that don't need it.
|
|
|
|
|
|
Zaptel configuration
|
|
--------------------
|
|
|
|
Download the documentation how to configure Zaptel driver from
|
|
|
|
(http://www.digium.com/downloads/configuring_zaptel.pdf).
|
|
|
|
When configuring the Zaptel driver (/etc/zaptel.conf)
|
|
|
|
1) Select the same span configurations as you used for WANPIPE
|
|
(i.e. LBO, framing, coding parameters).
|
|
|
|
Otherwise the Zaptel configuration is completely
|
|
standard, except that if there are data channels that
|
|
will be handled by WANPIPE, those channels should be ignored,
|
|
and not configured as 'nethdlc'.
|
|
|
|
2) If you are using multiple WANPIPE devices for Asterisk
|
|
|
|
For example, an A102 card might be configured as:
|
|
|
|
wanpipe1 and wanpipe2
|
|
|
|
then you need to set your starting scripts to start
|
|
the wanpipes in the same sequence as defined in zaptel.conf.
|
|
|
|
Run: wanrouter wanrc
|
|
|
|
to set the wanpipe startup order.
|
|
|
|
3) If you are using some channels for DATA
|
|
|
|
You don't need to set the channel list for this
|
|
interface under /etc/zaptel.conf because all data will go
|
|
through the separate WANPIPE driver to the kernel.
|
|
|
|
-------------------------------------------------------------------
|