2005-04-17 00:20:36 +02:00
|
|
|
/* -*- linux-c -*-
|
|
|
|
|
* sysctl_net_core.c: sysctl interface to net core subsystem.
|
|
|
|
|
*
|
|
|
|
|
* Begun April 1, 1996, Mike Shaver.
|
|
|
|
|
* Added /proc/sys/net/core directory entry (empty =) ). [MS]
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
#include <linux/sysctl.h>
|
|
|
|
|
#include <linux/module.h>
|
2005-08-16 07:18:02 +02:00
|
|
|
#include <linux/socket.h>
|
2007-10-24 06:13:53 +02:00
|
|
|
#include <linux/netdevice.h>
|
2009-09-22 16:18:09 +02:00
|
|
|
#include <linux/ratelimit.h>
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
#include <linux/vmalloc.h>
|
2007-12-05 10:37:34 +01:00
|
|
|
#include <linux/init.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
|
|
|
#include <linux/slab.h>
|
2012-04-18 20:05:46 +02:00
|
|
|
#include <linux/kmemleak.h>
|
2009-09-22 16:18:09 +02:00
|
|
|
|
2009-02-25 11:32:14 +01:00
|
|
|
#include <net/ip.h>
|
2005-08-16 07:18:02 +02:00
|
|
|
#include <net/sock.h>
|
2011-05-27 19:41:33 +02:00
|
|
|
#include <net/net_ratelimit.h>
|
2013-07-10 16:13:17 +02:00
|
|
|
#include <net/busy_poll.h>
|
2013-08-28 01:19:08 +02:00
|
|
|
#include <net/pkt_sched.h>
|
2005-04-17 00:20:36 +02:00
|
|
|
|
2013-08-02 16:36:40 +02:00
|
|
|
static int zero = 0;
|
2013-01-23 21:35:28 +01:00
|
|
|
static int one = 1;
|
2015-03-11 12:29:17 +01:00
|
|
|
static int min_sndbuf = SOCK_MIN_SNDBUF;
|
|
|
|
|
static int min_rcvbuf = SOCK_MIN_RCVBUF;
|
2016-02-03 09:26:57 +01:00
|
|
|
static int max_skb_frags = MAX_SKB_FRAGS;
|
2013-01-23 21:35:28 +01:00
|
|
|
|
2014-11-11 19:59:17 +01:00
|
|
|
static int net_msg_warn; /* Unused, but still a sysctl */
|
|
|
|
|
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
#ifdef CONFIG_RPS
|
2013-06-12 08:04:25 +02:00
|
|
|
static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
void __user *buffer, size_t *lenp, loff_t *ppos)
|
|
|
|
|
{
|
|
|
|
|
unsigned int orig_size, size;
|
|
|
|
|
int ret, i;
|
2013-06-12 08:04:25 +02:00
|
|
|
struct ctl_table tmp = {
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
.data = &size,
|
|
|
|
|
.maxlen = sizeof(size),
|
|
|
|
|
.mode = table->mode
|
|
|
|
|
};
|
|
|
|
|
struct rps_sock_flow_table *orig_sock_table, *sock_table;
|
|
|
|
|
static DEFINE_MUTEX(sock_flow_mutex);
|
|
|
|
|
|
|
|
|
|
mutex_lock(&sock_flow_mutex);
|
|
|
|
|
|
2010-10-25 05:02:02 +02:00
|
|
|
orig_sock_table = rcu_dereference_protected(rps_sock_flow_table,
|
|
|
|
|
lockdep_is_held(&sock_flow_mutex));
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
size = orig_size = orig_sock_table ? orig_sock_table->mask + 1 : 0;
|
|
|
|
|
|
|
|
|
|
ret = proc_dointvec(&tmp, write, buffer, lenp, ppos);
|
|
|
|
|
|
|
|
|
|
if (write) {
|
|
|
|
|
if (size) {
|
2015-02-09 05:39:13 +01:00
|
|
|
if (size > 1<<29) {
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
/* Enforce limit to prevent overflow */
|
|
|
|
|
mutex_unlock(&sock_flow_mutex);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
size = roundup_pow_of_two(size);
|
|
|
|
|
if (size != orig_size) {
|
|
|
|
|
sock_table =
|
|
|
|
|
vmalloc(RPS_SOCK_FLOW_TABLE_SIZE(size));
|
|
|
|
|
if (!sock_table) {
|
|
|
|
|
mutex_unlock(&sock_flow_mutex);
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
}
|
net: rfs: add hash collision detection
Receive Flow Steering is a nice solution but suffers from
hash collisions when a mix of connected and unconnected traffic
is received on the host, when flow hash table is populated.
Also, clearing flow in inet_release() makes RFS not very good
for short lived flows, as many packets can follow close().
(FIN , ACK packets, ...)
This patch extends the information stored into global hash table
to not only include cpu number, but upper part of the hash value.
I use a 32bit value, and dynamically split it in two parts.
For host with less than 64 possible cpus, this gives 6 bits for the
cpu number, and 26 (32-6) bits for the upper part of the hash.
Since hash bucket selection use low order bits of the hash, we have
a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big
enough.
If the hash found in flow table does not match, we fallback to RPS (if
it is enabled for the rxqueue).
This means that a packet for an non connected flow can avoid the
IPI through a unrelated/victim CPU.
This also means we no longer have to clear the table at socket
close time, and this helps short lived flows performance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06 21:59:01 +01:00
|
|
|
rps_cpu_mask = roundup_pow_of_two(nr_cpu_ids) - 1;
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
sock_table->mask = size - 1;
|
|
|
|
|
} else
|
|
|
|
|
sock_table = orig_sock_table;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < size; i++)
|
|
|
|
|
sock_table->ents[i] = RPS_NO_CPU;
|
|
|
|
|
} else
|
|
|
|
|
sock_table = NULL;
|
|
|
|
|
|
|
|
|
|
if (sock_table != orig_sock_table) {
|
|
|
|
|
rcu_assign_pointer(rps_sock_flow_table, sock_table);
|
2011-11-17 04:13:26 +01:00
|
|
|
if (sock_table)
|
2012-02-24 08:31:31 +01:00
|
|
|
static_key_slow_inc(&rps_needed);
|
2011-11-17 04:13:26 +01:00
|
|
|
if (orig_sock_table) {
|
2012-02-24 08:31:31 +01:00
|
|
|
static_key_slow_dec(&rps_needed);
|
2011-11-17 04:13:26 +01:00
|
|
|
synchronize_rcu();
|
|
|
|
|
vfree(orig_sock_table);
|
|
|
|
|
}
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&sock_flow_mutex);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
#endif /* CONFIG_RPS */
|
|
|
|
|
|
2013-05-20 06:02:32 +02:00
|
|
|
#ifdef CONFIG_NET_FLOW_LIMIT
|
|
|
|
|
static DEFINE_MUTEX(flow_limit_update_mutex);
|
|
|
|
|
|
2013-06-12 08:04:25 +02:00
|
|
|
static int flow_limit_cpu_sysctl(struct ctl_table *table, int write,
|
2013-05-20 06:02:32 +02:00
|
|
|
void __user *buffer, size_t *lenp,
|
|
|
|
|
loff_t *ppos)
|
|
|
|
|
{
|
|
|
|
|
struct sd_flow_limit *cur;
|
|
|
|
|
struct softnet_data *sd;
|
|
|
|
|
cpumask_var_t mask;
|
|
|
|
|
int i, len, ret = 0;
|
|
|
|
|
|
|
|
|
|
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
|
|
if (write) {
|
|
|
|
|
ret = cpumask_parse_user(buffer, *lenp, mask);
|
|
|
|
|
if (ret)
|
|
|
|
|
goto done;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&flow_limit_update_mutex);
|
|
|
|
|
len = sizeof(*cur) + netdev_flow_limit_table_len;
|
|
|
|
|
for_each_possible_cpu(i) {
|
|
|
|
|
sd = &per_cpu(softnet_data, i);
|
|
|
|
|
cur = rcu_dereference_protected(sd->flow_limit,
|
|
|
|
|
lockdep_is_held(&flow_limit_update_mutex));
|
|
|
|
|
if (cur && !cpumask_test_cpu(i, mask)) {
|
|
|
|
|
RCU_INIT_POINTER(sd->flow_limit, NULL);
|
|
|
|
|
synchronize_rcu();
|
|
|
|
|
kfree(cur);
|
|
|
|
|
} else if (!cur && cpumask_test_cpu(i, mask)) {
|
2013-12-18 15:46:23 +01:00
|
|
|
cur = kzalloc_node(len, GFP_KERNEL,
|
|
|
|
|
cpu_to_node(i));
|
2013-05-20 06:02:32 +02:00
|
|
|
if (!cur) {
|
|
|
|
|
/* not unwinding previous changes */
|
|
|
|
|
ret = -ENOMEM;
|
|
|
|
|
goto write_unlock;
|
|
|
|
|
}
|
|
|
|
|
cur->num_buckets = netdev_flow_limit_table_len;
|
|
|
|
|
rcu_assign_pointer(sd->flow_limit, cur);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
write_unlock:
|
|
|
|
|
mutex_unlock(&flow_limit_update_mutex);
|
|
|
|
|
} else {
|
2013-06-13 21:29:38 +02:00
|
|
|
char kbuf[128];
|
|
|
|
|
|
2013-05-20 06:02:32 +02:00
|
|
|
if (*ppos || !*lenp) {
|
|
|
|
|
*lenp = 0;
|
|
|
|
|
goto done;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
cpumask_clear(mask);
|
|
|
|
|
rcu_read_lock();
|
|
|
|
|
for_each_possible_cpu(i) {
|
|
|
|
|
sd = &per_cpu(softnet_data, i);
|
|
|
|
|
if (rcu_dereference(sd->flow_limit))
|
|
|
|
|
cpumask_set_cpu(i, mask);
|
|
|
|
|
}
|
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
2013-06-13 21:29:38 +02:00
|
|
|
len = min(sizeof(kbuf) - 1, *lenp);
|
2015-02-13 23:37:42 +01:00
|
|
|
len = scnprintf(kbuf, len, "%*pb", cpumask_pr_args(mask));
|
2013-06-13 21:29:38 +02:00
|
|
|
if (!len) {
|
|
|
|
|
*lenp = 0;
|
|
|
|
|
goto done;
|
|
|
|
|
}
|
|
|
|
|
if (len < *lenp)
|
|
|
|
|
kbuf[len++] = '\n';
|
|
|
|
|
if (copy_to_user(buffer, kbuf, len)) {
|
|
|
|
|
ret = -EFAULT;
|
|
|
|
|
goto done;
|
|
|
|
|
}
|
|
|
|
|
*lenp = len;
|
|
|
|
|
*ppos += len;
|
2013-05-20 06:02:32 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
done:
|
|
|
|
|
free_cpumask_var(mask);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
2013-06-12 08:04:25 +02:00
|
|
|
static int flow_limit_table_len_sysctl(struct ctl_table *table, int write,
|
2013-05-20 06:02:32 +02:00
|
|
|
void __user *buffer, size_t *lenp,
|
|
|
|
|
loff_t *ppos)
|
|
|
|
|
{
|
|
|
|
|
unsigned int old, *ptr;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
mutex_lock(&flow_limit_update_mutex);
|
|
|
|
|
|
|
|
|
|
ptr = table->data;
|
|
|
|
|
old = *ptr;
|
|
|
|
|
ret = proc_dointvec(table, write, buffer, lenp, ppos);
|
|
|
|
|
if (!ret && write && !is_power_of_2(*ptr)) {
|
|
|
|
|
*ptr = old;
|
|
|
|
|
ret = -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
mutex_unlock(&flow_limit_update_mutex);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
#endif /* CONFIG_NET_FLOW_LIMIT */
|
|
|
|
|
|
2013-08-28 01:19:08 +02:00
|
|
|
#ifdef CONFIG_NET_SCHED
|
|
|
|
|
static int set_default_qdisc(struct ctl_table *table, int write,
|
|
|
|
|
void __user *buffer, size_t *lenp, loff_t *ppos)
|
|
|
|
|
{
|
|
|
|
|
char id[IFNAMSIZ];
|
|
|
|
|
struct ctl_table tbl = {
|
|
|
|
|
.data = id,
|
|
|
|
|
.maxlen = IFNAMSIZ,
|
|
|
|
|
};
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
qdisc_get_default(id, IFNAMSIZ);
|
|
|
|
|
|
|
|
|
|
ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
|
|
|
|
|
if (write && ret == 0)
|
|
|
|
|
ret = qdisc_set_default(id);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
2014-11-16 15:23:05 +01:00
|
|
|
static int proc_do_rss_key(struct ctl_table *table, int write,
|
|
|
|
|
void __user *buffer, size_t *lenp, loff_t *ppos)
|
|
|
|
|
{
|
|
|
|
|
struct ctl_table fake_table;
|
|
|
|
|
char buf[NETDEV_RSS_KEY_LEN * 3];
|
|
|
|
|
|
|
|
|
|
snprintf(buf, sizeof(buf), "%*phC", NETDEV_RSS_KEY_LEN, netdev_rss_key);
|
|
|
|
|
fake_table.data = buf;
|
|
|
|
|
fake_table.maxlen = sizeof(buf);
|
|
|
|
|
return proc_dostring(&fake_table, write, buffer, lenp, ppos);
|
|
|
|
|
}
|
|
|
|
|
|
2007-12-05 10:37:34 +01:00
|
|
|
static struct ctl_table net_core_table[] = {
|
2005-04-17 00:20:36 +02:00
|
|
|
#ifdef CONFIG_NET
|
|
|
|
|
{
|
|
|
|
|
.procname = "wmem_max",
|
|
|
|
|
.data = &sysctl_wmem_max,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2013-01-23 21:35:28 +01:00
|
|
|
.proc_handler = proc_dointvec_minmax,
|
2015-03-11 12:29:17 +01:00
|
|
|
.extra1 = &min_sndbuf,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "rmem_max",
|
|
|
|
|
.data = &sysctl_rmem_max,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2013-01-23 21:35:28 +01:00
|
|
|
.proc_handler = proc_dointvec_minmax,
|
2015-03-11 12:29:17 +01:00
|
|
|
.extra1 = &min_rcvbuf,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "wmem_default",
|
|
|
|
|
.data = &sysctl_wmem_default,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2013-01-23 21:35:28 +01:00
|
|
|
.proc_handler = proc_dointvec_minmax,
|
2015-03-11 12:29:17 +01:00
|
|
|
.extra1 = &min_sndbuf,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "rmem_default",
|
|
|
|
|
.data = &sysctl_rmem_default,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2013-01-23 21:35:28 +01:00
|
|
|
.proc_handler = proc_dointvec_minmax,
|
2015-03-11 12:29:17 +01:00
|
|
|
.extra1 = &min_rcvbuf,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "dev_weight",
|
|
|
|
|
.data = &weight_p,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "netdev_max_backlog",
|
|
|
|
|
.data = &netdev_max_backlog,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
2014-11-16 15:23:05 +01:00
|
|
|
{
|
|
|
|
|
.procname = "netdev_rss_key",
|
|
|
|
|
.data = &netdev_rss_key,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0444,
|
|
|
|
|
.proc_handler = proc_do_rss_key,
|
|
|
|
|
},
|
2011-04-20 11:27:32 +02:00
|
|
|
#ifdef CONFIG_BPF_JIT
|
|
|
|
|
{
|
|
|
|
|
.procname = "bpf_jit_enable",
|
|
|
|
|
.data = &bpf_jit_enable,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = proc_dointvec
|
|
|
|
|
},
|
bpf: add generic constant blinding for use in jits
This work adds a generic facility for use from eBPF JIT compilers
that allows for further hardening of JIT generated images through
blinding constants. In response to the original work on BPF JIT
spraying published by Keegan McAllister [1], most BPF JITs were
changed to make images read-only and start at a randomized offset
in the page, where the rest was filled with trap instructions. We
have this nowadays in x86, arm, arm64 and s390 JIT compilers.
Additionally, later work also made eBPF interpreter images read
only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
arm, arm64 and s390 archs as well currently. This is done by
default for mentioned JITs when JITing is enabled. Furthermore,
we had a generic and configurable constant blinding facility on our
todo for quite some time now to further make spraying harder, and
first implementation since around netconf 2016.
We found that for systems where untrusted users can load cBPF/eBPF
code where JIT is enabled, start offset randomization helps a bit
to make jumps into crafted payload harder, but in case where larger
programs that cross page boundary are injected, we again have some
part of the program opcodes at a page start offset. With improved
guessing and more reliable payload injection, chances can increase
to jump into such payload. Elena Reshetova recently wrote a test
case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
can leave some more room for payloads. Note that for all this,
additional bugs in the kernel are still required to make the jump
(and of course to guess right, to not jump into a trap) and naturally
the JIT must be enabled, which is disabled by default.
For helping mitigation, the general idea is to provide an option
bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
that for cases where JIT should be enabled for performance reasons,
the generated image can be further hardened with blinding constants
for unpriviledged users (bpf_jit_harden == 1), with trading off
performance for these, but not for privileged ones. We also added
the option of blinding for all users (bpf_jit_harden == 2), which
is quite helpful for testing f.e. with test_bpf.ko. There are no
further e.g. hardening levels of bpf_jit_harden switch intended,
rationale is to have it dead simple to use as on/off. Since this
functionality would need to be duplicated over and over for JIT
compilers to use, which are already complex enough, we provide a
generic eBPF byte-code level based blinding implementation, which is
then just transparently JITed. JIT compilers need to make only a few
changes to integrate this facility and can be migrated one by one.
This option is for eBPF JITs and will be used in x86, arm64, s390
without too much effort, and soon ppc64 JITs, thus that native eBPF
can be blinded as well as cBPF to eBPF migrations, so that both can
be covered with a single implementation. The rule for JITs is that
bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
and in case blinding is disabled, we follow normally with JITing the
passed program. In case blinding is enabled and we fail during the
process of blinding itself, we must return with the interpreter.
Similarly, in case the JITing process after the blinding failed, we
return normally to the interpreter with the non-blinded code. Meaning,
interpreter doesn't change in any way and operates on eBPF code as
usual. For doing this pre-JIT blinding step, we need to make use of
a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
to the JIT and not in any way part of the eBPF architecture. Just like
in the same way as JITs internally make use of some helper registers
when emitting code, only that here the helper register is one
abstraction level higher in eBPF bytecode, but nevertheless in JIT
phase. That helper register is needed since f.e. manually written
program can issue loads to all registers of eBPF architecture.
The core concept with the additional register is: blind out all 32
and 64 bit constants by converting BPF_K based instructions into a
small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
and REG <OP> BPF_REG_AX, so actual operation on the target register
is translated from BPF_K into BPF_X one that is operating on
BPF_REG_AX's content. During rewriting phase when blinding, RND is
newly generated via prandom_u32() for each processed instruction.
64 bit loads are split into two 32 bit loads to make translation and
patching not too complex. Only basic thing required by JITs is to
call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair, and to map BPF_REG_AX into an unused register.
Small bpf_jit_disasm extract from [2] when applied to x86 JIT:
echo 0 > /proc/sys/net/core/bpf_jit_harden
ffffffffa034f5e9 + <x>:
[...]
39: mov $0xa8909090,%eax
3e: mov $0xa8909090,%eax
43: mov $0xa8ff3148,%eax
48: mov $0xa89081b4,%eax
4d: mov $0xa8900bb0,%eax
52: mov $0xa810e0c1,%eax
57: mov $0xa8908eb4,%eax
5c: mov $0xa89020b0,%eax
[...]
echo 1 > /proc/sys/net/core/bpf_jit_harden
ffffffffa034f1e5 + <x>:
[...]
39: mov $0xe1192563,%r10d
3f: xor $0x4989b5f3,%r10d
46: mov %r10d,%eax
49: mov $0xb8296d93,%r10d
4f: xor $0x10b9fd03,%r10d
56: mov %r10d,%eax
59: mov $0x8c381146,%r10d
5f: xor $0x24c7200e,%r10d
66: mov %r10d,%eax
69: mov $0xeb2a830e,%r10d
6f: xor $0x43ba02ba,%r10d
76: mov %r10d,%eax
79: mov $0xd9730af,%r10d
7f: xor $0xa5073b1f,%r10d
86: mov %r10d,%eax
89: mov $0x9a45662b,%r10d
8f: xor $0x325586ea,%r10d
96: mov %r10d,%eax
[...]
As can be seen, original constants that carry payload are hidden
when enabled, actual operations are transformed from constant-based
to register-based ones, making jumps into constants ineffective.
Above extract/example uses single BPF load instruction over and
over, but of course all instructions with constants are blinded.
Performance wise, JIT with blinding performs a bit slower than just
JIT and faster than interpreter case. This is expected, since we
still get all the performance benefits from JITing and in normal
use-cases not every single instruction needs to be blinded. Summing
up all 296 test cases averaged over multiple runs from test_bpf.ko
suite, interpreter was 55% slower than JIT only and JIT with blinding
was 8% slower than JIT only. Since there are also some extremes in
the test suite, I expect for ordinary workloads that the performance
for the JIT with blinding case is even closer to JIT only case,
f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
35 (+ blinding), and 151 (interpreter).
BPF test suite, seccomp test suite, eBPF sample code and various
bigger networking eBPF programs have been tested with this and were
running fine. For testing purposes, I also adapted interpreter and
redirected blinded eBPF image to interpreter and also here all tests
pass.
[1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
[2] https://github.com/01org/jit-spray-poc-for-ksp/
[3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 19:08:32 +02:00
|
|
|
# ifdef CONFIG_HAVE_EBPF_JIT
|
|
|
|
|
{
|
|
|
|
|
.procname = "bpf_jit_harden",
|
|
|
|
|
.data = &bpf_jit_harden,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0600,
|
|
|
|
|
.proc_handler = proc_dointvec,
|
|
|
|
|
},
|
|
|
|
|
# endif
|
2011-04-20 11:27:32 +02:00
|
|
|
#endif
|
net: Consistent skb timestamping
With RPS inclusion, skb timestamping is not consistent in RX path.
If netif_receive_skb() is used, its deferred after RPS dispatch.
If netif_rx() is used, its done before RPS dispatch.
This can give strange tcpdump timestamps results.
I think timestamping should be done as soon as possible in the receive
path, to get meaningful values (ie timestamps taken at the time packet
was delivered by NIC driver to our stack), even if NAPI already can
defer timestamping a bit (RPS can help to reduce the gap)
Tom Herbert prefer to sample timestamps after RPS dispatch. In case
sampling is expensive (HPET/acpi_pm on x86), this makes sense.
Let admins switch from one mode to another, using a new
sysctl, /proc/sys/net/core/netdev_tstamp_prequeue
Its default value (1), means timestamps are taken as soon as possible,
before backlog queueing, giving accurate timestamps.
Setting a 0 value permits to sample timestamps when processing backlog,
after RPS dispatch, to lower the load of the pre-RPS cpu.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16 08:57:10 +02:00
|
|
|
{
|
|
|
|
|
.procname = "netdev_tstamp_prequeue",
|
|
|
|
|
.data = &netdev_tstamp_prequeue,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = proc_dointvec
|
|
|
|
|
},
|
2005-04-17 00:20:36 +02:00
|
|
|
{
|
|
|
|
|
.procname = "message_cost",
|
2008-07-25 10:45:58 +02:00
|
|
|
.data = &net_ratelimit_state.interval,
|
2005-04-17 00:20:36 +02:00
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec_jiffies,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "message_burst",
|
2008-07-25 10:45:58 +02:00
|
|
|
.data = &net_ratelimit_state.burst,
|
2005-04-17 00:20:36 +02:00
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec,
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "optmem_max",
|
|
|
|
|
.data = &sysctl_optmem_max,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec
|
2005-04-17 00:20:36 +02:00
|
|
|
},
|
2015-01-30 19:29:32 +01:00
|
|
|
{
|
|
|
|
|
.procname = "tstamp_allow_data",
|
|
|
|
|
.data = &sysctl_tstamp_allow_data,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = proc_dointvec_minmax,
|
|
|
|
|
.extra1 = &zero,
|
|
|
|
|
.extra2 = &one
|
|
|
|
|
},
|
rfs: Receive Flow Steering
This patch implements receive flow steering (RFS). RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running. RFS is an
extension of Receive Packet Steering (RPS).
The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure. The rxhash is passed in skb's received on
the connection from netif_receive_skb. For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.
The convolution of the simple approach is that it would potentially
allow OOO packets. If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.
To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.
rps_sock_table is a global hash table. Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.
rps_dev_flow_table is specific to each device queue. Each entry
contains a CPU and a tail queue counter. The CPU is the "current"
CPU for a matching flow. The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.
Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length. When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.
And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted. When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:
- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table. This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.
Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality. 2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.
This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.
There are two configuration parameters for RFS. The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue. Both are rounded to power of two.
The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).
The benefits of RFS are dependent on cache hierarchy, application
load, and other factors. On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation. However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.
Below are some benchmark results which show the potential benfit of
this patch. The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp. The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.
e1000e on 8 core Intel
No RFS or RPS 104K tps at 30% CPU
No RFS (best RPS config): 290K tps at 63% CPU
RFS 303K tps at 61% CPU
RPC test tps CPU% 50/90/99% usec latency Latency StdDev
No RFS/RPS 103K 48% 757/900/3185 4472.35
RPS only: 174K 73% 415/993/2468 491.66
RFS 223K 73% 379/651/1382 315.61
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17 01:01:27 +02:00
|
|
|
#ifdef CONFIG_RPS
|
|
|
|
|
{
|
|
|
|
|
.procname = "rps_sock_flow_entries",
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = rps_sock_flow_sysctl
|
|
|
|
|
},
|
|
|
|
|
#endif
|
2013-05-20 06:02:32 +02:00
|
|
|
#ifdef CONFIG_NET_FLOW_LIMIT
|
|
|
|
|
{
|
|
|
|
|
.procname = "flow_limit_cpu_bitmap",
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = flow_limit_cpu_sysctl
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.procname = "flow_limit_table_len",
|
|
|
|
|
.data = &netdev_flow_limit_table_len,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = flow_limit_table_len_sysctl
|
|
|
|
|
},
|
|
|
|
|
#endif /* CONFIG_NET_FLOW_LIMIT */
|
2013-08-01 05:10:25 +02:00
|
|
|
#ifdef CONFIG_NET_RX_BUSY_POLL
|
2013-06-10 10:39:50 +02:00
|
|
|
{
|
2013-07-10 16:13:36 +02:00
|
|
|
.procname = "busy_poll",
|
|
|
|
|
.data = &sysctl_net_busy_poll,
|
2013-06-14 15:33:25 +02:00
|
|
|
.maxlen = sizeof(unsigned int),
|
2013-06-10 10:39:50 +02:00
|
|
|
.mode = 0644,
|
2013-06-14 15:33:25 +02:00
|
|
|
.proc_handler = proc_dointvec
|
2013-06-10 10:39:50 +02:00
|
|
|
},
|
2013-06-24 09:28:03 +02:00
|
|
|
{
|
2013-07-10 16:13:36 +02:00
|
|
|
.procname = "busy_read",
|
|
|
|
|
.data = &sysctl_net_busy_read,
|
2013-06-24 09:28:03 +02:00
|
|
|
.maxlen = sizeof(unsigned int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = proc_dointvec
|
|
|
|
|
},
|
2013-08-28 01:19:08 +02:00
|
|
|
#endif
|
|
|
|
|
#ifdef CONFIG_NET_SCHED
|
|
|
|
|
{
|
|
|
|
|
.procname = "default_qdisc",
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.maxlen = IFNAMSIZ,
|
|
|
|
|
.proc_handler = set_default_qdisc
|
|
|
|
|
},
|
2013-06-10 10:39:50 +02:00
|
|
|
#endif
|
2005-04-17 00:20:36 +02:00
|
|
|
#endif /* CONFIG_NET */
|
2005-06-24 05:14:40 +02:00
|
|
|
{
|
|
|
|
|
.procname = "netdev_budget",
|
|
|
|
|
.data = &netdev_budget,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec
|
2005-06-24 05:14:40 +02:00
|
|
|
},
|
2007-03-09 05:41:08 +01:00
|
|
|
{
|
|
|
|
|
.procname = "warnings",
|
|
|
|
|
.data = &net_msg_warn,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2008-11-04 03:21:05 +01:00
|
|
|
.proc_handler = proc_dointvec
|
2007-03-09 05:41:08 +01:00
|
|
|
},
|
2016-02-03 09:26:57 +01:00
|
|
|
{
|
|
|
|
|
.procname = "max_skb_frags",
|
|
|
|
|
.data = &sysctl_max_skb_frags,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
|
|
|
|
.proc_handler = proc_dointvec_minmax,
|
|
|
|
|
.extra1 = &one,
|
|
|
|
|
.extra2 = &max_skb_frags,
|
|
|
|
|
},
|
2009-11-05 22:32:03 +01:00
|
|
|
{ }
|
2005-04-17 00:20:36 +02:00
|
|
|
};
|
2007-12-05 10:37:34 +01:00
|
|
|
|
2008-05-19 22:49:52 +02:00
|
|
|
static struct ctl_table netns_core_table[] = {
|
|
|
|
|
{
|
|
|
|
|
.procname = "somaxconn",
|
|
|
|
|
.data = &init_net.core.sysctl_somaxconn,
|
|
|
|
|
.maxlen = sizeof(int),
|
|
|
|
|
.mode = 0644,
|
2013-08-02 16:36:40 +02:00
|
|
|
.extra1 = &zero,
|
|
|
|
|
.proc_handler = proc_dointvec_minmax
|
2008-05-19 22:49:52 +02:00
|
|
|
},
|
2009-11-05 22:32:03 +01:00
|
|
|
{ }
|
2008-05-19 22:49:52 +02:00
|
|
|
};
|
|
|
|
|
|
2007-12-08 09:09:24 +01:00
|
|
|
static __net_init int sysctl_core_net_init(struct net *net)
|
2007-12-05 10:37:34 +01:00
|
|
|
{
|
2008-05-19 22:49:52 +02:00
|
|
|
struct ctl_table *tbl;
|
2007-12-08 09:09:24 +01:00
|
|
|
|
2008-04-01 04:41:14 +02:00
|
|
|
net->core.sysctl_somaxconn = SOMAXCONN;
|
2007-12-08 09:12:33 +01:00
|
|
|
|
2008-05-19 22:49:52 +02:00
|
|
|
tbl = netns_core_table;
|
2009-11-26 00:14:13 +01:00
|
|
|
if (!net_eq(net, &init_net)) {
|
2008-05-19 22:49:52 +02:00
|
|
|
tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL);
|
2007-12-08 09:09:24 +01:00
|
|
|
if (tbl == NULL)
|
|
|
|
|
goto err_dup;
|
|
|
|
|
|
2008-05-19 22:49:52 +02:00
|
|
|
tbl[0].data = &net->core.sysctl_somaxconn;
|
2012-11-16 04:02:59 +01:00
|
|
|
|
|
|
|
|
/* Don't export any sysctls to unprivileged users */
|
|
|
|
|
if (net->user_ns != &init_user_ns) {
|
|
|
|
|
tbl[0].procname = NULL;
|
|
|
|
|
}
|
2007-12-08 09:09:24 +01:00
|
|
|
}
|
|
|
|
|
|
2012-04-19 15:44:49 +02:00
|
|
|
net->core.sysctl_hdr = register_net_sysctl(net, "net/core", tbl);
|
2008-04-01 04:41:14 +02:00
|
|
|
if (net->core.sysctl_hdr == NULL)
|
2007-12-08 09:09:24 +01:00
|
|
|
goto err_reg;
|
2007-12-05 10:37:34 +01:00
|
|
|
|
2007-12-08 09:09:24 +01:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
err_reg:
|
2008-05-19 22:49:52 +02:00
|
|
|
if (tbl != netns_core_table)
|
2007-12-08 09:09:24 +01:00
|
|
|
kfree(tbl);
|
|
|
|
|
err_dup:
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static __net_exit void sysctl_core_net_exit(struct net *net)
|
|
|
|
|
{
|
|
|
|
|
struct ctl_table *tbl;
|
|
|
|
|
|
2008-04-01 04:41:14 +02:00
|
|
|
tbl = net->core.sysctl_hdr->ctl_table_arg;
|
|
|
|
|
unregister_net_sysctl_table(net->core.sysctl_hdr);
|
2008-05-19 22:49:52 +02:00
|
|
|
BUG_ON(tbl == netns_core_table);
|
2007-12-08 09:09:24 +01:00
|
|
|
kfree(tbl);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static __net_initdata struct pernet_operations sysctl_core_ops = {
|
|
|
|
|
.init = sysctl_core_net_init,
|
|
|
|
|
.exit = sysctl_core_net_exit,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static __init int sysctl_core_init(void)
|
|
|
|
|
{
|
2012-04-19 15:22:55 +02:00
|
|
|
register_net_sysctl(&init_net, "net/core", net_core_table);
|
2007-12-08 09:09:24 +01:00
|
|
|
return register_pernet_subsys(&sysctl_core_ops);
|
2007-12-05 10:37:34 +01:00
|
|
|
}
|
|
|
|
|
|
2008-11-26 03:00:48 +01:00
|
|
|
fs_initcall(sysctl_core_init);
|
