kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-hardened/drivers/usb/host/xhci-mem.c

759 lines
22 KiB
C
Raw Normal View History

USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/usb.h>
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
#include <linux/pci.h>
USB: xhci: Make xhci-mem.c include linux/dmapool.h xhci-mem.c includes calls to dma_pool_alloc() and other functions defined in linux/dmapool.h. Make sure to include that header file. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:06:56 +02:00
#include <linux/dmapool.h>
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
#include "xhci.h"
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/*
* Allocates a generic ring segment from the ring pool, sets the dma address,
* initializes the segment to zero, and sets the private next pointer to NULL.
*
* Section 4.11.1.1:
* "All components of all Command and Transfer TRBs shall be initialized to '0'"
*/
static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flags)
{
struct xhci_segment *seg;
dma_addr_t dma;
seg = kzalloc(sizeof *seg, flags);
if (!seg)
return 0;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
if (!seg->trbs) {
kfree(seg);
return 0;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
seg->trbs, (unsigned long long)dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
memset(seg->trbs, 0, SEGMENT_SIZE);
seg->dma = dma;
seg->next = NULL;
return seg;
}
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
if (!seg)
return;
if (seg->trbs) {
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Freeing DMA segment at %p (virtual) 0x%llx (DMA)\n",
seg->trbs, (unsigned long long)seg->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Freeing priv segment structure at %p\n", seg);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
kfree(seg);
}
/*
* Make the prev segment point to the next segment.
*
* Change the last TRB in the prev segment to be a Link TRB which points to the
* DMA address of the next segment. The caller needs to set any Link TRB
* related flags, such as End TRB, Toggle Cycle, and no snoop.
*/
static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
struct xhci_segment *next, bool link_trbs)
{
u32 val;
if (!prev || !next)
return;
prev->next = next;
if (link_trbs) {
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
val &= ~TRB_TYPE_BITMASK;
val |= TRB_TYPE(TRB_LINK);
prev->trbs[TRBS_PER_SEGMENT-1].link.control = val;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Linking segment 0x%llx to segment 0x%llx (DMA)\n",
(unsigned long long)prev->dma,
(unsigned long long)next->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
}
/* XXX: Do we need the hcd structure in all these functions? */
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
{
struct xhci_segment *seg;
struct xhci_segment *first_seg;
if (!ring || !ring->first_seg)
return;
first_seg = ring->first_seg;
seg = first_seg->next;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Freeing ring at %p\n", ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
while (seg != first_seg) {
struct xhci_segment *next = seg->next;
xhci_segment_free(xhci, seg);
seg = next;
}
xhci_segment_free(xhci, first_seg);
ring->first_seg = NULL;
kfree(ring);
}
/**
* Create a new ring with zero or more segments.
*
* Link each segment together into a ring.
* Set the end flag and the cycle toggle bit on the last segment.
* See section 4.9.1 and figures 15 and 16.
*/
static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
unsigned int num_segs, bool link_trbs, gfp_t flags)
{
struct xhci_ring *ring;
struct xhci_segment *prev;
ring = kzalloc(sizeof *(ring), flags);
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Allocating ring at %p\n", ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
if (!ring)
return 0;
USB: xhci: Control transfer support. Allow device drivers to enqueue URBs to control endpoints on devices under an xHCI host controller. Each control transfer is represented by a series of Transfer Descriptors (TDs) written to an endpoint ring. There is one TD for the Setup phase, (optionally) one TD for the Data phase, and one TD for the Status phase. Enqueue these TDs onto the endpoint ring that represents the control endpoint. The host controller hardware will return an event on the event ring that points to the (DMA) address of one of the TDs on the endpoint ring. If the transfer was successful, the transfer event TRB will have a completion code of success, and it will point to the Status phase TD. Anything else is considered an error. This should work for control endpoints besides the default endpoint, but that hasn't been tested. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:01 +02:00
INIT_LIST_HEAD(&ring->td_list);
USB: xhci: URB cancellation support. Add URB cancellation support to the xHCI host controller driver. This currently supports cancellation for endpoints that do not have streams enabled. An URB is represented by a number of Transaction Request Buffers (TRBs), that are chained together to make one (or more) Transaction Descriptors (TDs) on an endpoint ring. The ring is comprised of contiguous segments, linked together with Link TRBs (which may or may not be chained into a TD). To cancel an URB, we must stop the endpoint ring, make the hardware skip over the TDs in the URB (either by turning them into No-op TDs, or by moving the hardware's ring dequeue pointer past the last TRB in the last TD), and then restart the ring. There are times when we must drop the xHCI lock during this process, like when we need to complete cancelled URBs. We must ensure that additional URBs can be marked as cancelled, and that new URBs can be enqueued (since the URB completion handlers can do either). The new endpoint ring variables cancels_pending and state (which can only be modified while holding the xHCI lock) ensure that future cancellation and enqueueing do not interrupt any pending cancellation code. To facilitate cancellation, we must keep track of the starting ring segment, first TRB, and last TRB for each URB. We also need to keep track of the list of TDs that have been marked as cancelled, separate from the list of TDs that are queued for this endpoint. The new variables and cancellation list are stored in the xhci_td structure. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:02:31 +02:00
INIT_LIST_HEAD(&ring->cancelled_td_list);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
if (num_segs == 0)
return ring;
ring->first_seg = xhci_segment_alloc(xhci, flags);
if (!ring->first_seg)
goto fail;
num_segs--;
prev = ring->first_seg;
while (num_segs > 0) {
struct xhci_segment *next;
next = xhci_segment_alloc(xhci, flags);
if (!next)
goto fail;
xhci_link_segments(xhci, prev, next, link_trbs);
prev = next;
num_segs--;
}
xhci_link_segments(xhci, prev, ring->first_seg, link_trbs);
if (link_trbs) {
/* See section 4.9.2.1 and 6.4.4.1 */
prev->trbs[TRBS_PER_SEGMENT-1].link.control |= (LINK_TOGGLE);
xhci_dbg(xhci, "Wrote link toggle flag to"
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
" segment %p (virtual), 0x%llx (DMA)\n",
prev, (unsigned long long)prev->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
}
/* The ring is empty, so the enqueue pointer == dequeue pointer */
ring->enqueue = ring->first_seg->trbs;
USB: xhci: No-op command queueing and irq handler. xHCI host controllers can optionally implement a no-op test. This simple test ensures the OS has correctly setup all basic data structures and can correctly respond to interrupts from the host controller hardware. There are two rings exercised by the no-op test: the command ring, and the event ring. The host controller driver writes a no-op command TRB to the command ring, and rings the doorbell for the command ring (the first entry in the doorbell array). The hardware receives this event, places a command completion event on the event ring, and fires an interrupt. The host controller driver sees the interrupt, and checks the event ring for TRBs it can process, and sees the command completion event. (See the rules in xhci-ring.c for who "owns" a TRB. This is a simplified set of rules, and may not contain all the details that are in the xHCI 0.95 spec.) A timer fires every 60 seconds to debug the state of the hardware and command and event rings. This timer only runs if CONFIG_USB_XHCI_HCD_DEBUGGING is 'y'. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:53:56 +02:00
ring->enq_seg = ring->first_seg;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
ring->dequeue = ring->enqueue;
USB: xhci: No-op command queueing and irq handler. xHCI host controllers can optionally implement a no-op test. This simple test ensures the OS has correctly setup all basic data structures and can correctly respond to interrupts from the host controller hardware. There are two rings exercised by the no-op test: the command ring, and the event ring. The host controller driver writes a no-op command TRB to the command ring, and rings the doorbell for the command ring (the first entry in the doorbell array). The hardware receives this event, places a command completion event on the event ring, and fires an interrupt. The host controller driver sees the interrupt, and checks the event ring for TRBs it can process, and sees the command completion event. (See the rules in xhci-ring.c for who "owns" a TRB. This is a simplified set of rules, and may not contain all the details that are in the xHCI 0.95 spec.) A timer fires every 60 seconds to debug the state of the hardware and command and event rings. This timer only runs if CONFIG_USB_XHCI_HCD_DEBUGGING is 'y'. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:53:56 +02:00
ring->deq_seg = ring->first_seg;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* The ring is initialized to 0. The producer must write 1 to the cycle
* bit to handover ownership of the TRB, so PCS = 1. The consumer must
* compare CCS to the cycle bit to check ownership, so CCS = 1.
*/
ring->cycle_state = 1;
return ring;
fail:
xhci_ring_free(xhci, ring);
return 0;
}
USB: xhci: Control transfer support. Allow device drivers to enqueue URBs to control endpoints on devices under an xHCI host controller. Each control transfer is represented by a series of Transfer Descriptors (TDs) written to an endpoint ring. There is one TD for the Setup phase, (optionally) one TD for the Data phase, and one TD for the Status phase. Enqueue these TDs onto the endpoint ring that represents the control endpoint. The host controller hardware will return an event on the event ring that points to the (DMA) address of one of the TDs on the endpoint ring. If the transfer was successful, the transfer event TRB will have a completion code of success, and it will point to the Status phase TD. Anything else is considered an error. This should work for control endpoints besides the default endpoint, but that hasn't been tested. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:01 +02:00
/* All the xhci_tds in the ring's TD list should be freed at this point */
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *dev;
int i;
/* Slot ID 0 is reserved */
if (slot_id == 0 || !xhci->devs[slot_id])
return;
dev = xhci->devs[slot_id];
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
if (!dev)
return;
for (i = 0; i < 31; ++i)
if (dev->ep_rings[i])
xhci_ring_free(xhci, dev->ep_rings[i]);
if (dev->in_ctx)
dma_pool_free(xhci->device_pool,
dev->in_ctx, dev->in_ctx_dma);
if (dev->out_ctx)
dma_pool_free(xhci->device_pool,
dev->out_ctx, dev->out_ctx_dma);
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = 0;
}
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
dma_addr_t dma;
struct xhci_virt_device *dev;
/* Slot ID 0 is reserved */
if (slot_id == 0 || xhci->devs[slot_id]) {
xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
return 0;
}
xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
if (!xhci->devs[slot_id])
return 0;
dev = xhci->devs[slot_id];
/* Allocate the (output) device context that will be used in the HC */
dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
if (!dev->out_ctx)
goto fail;
dev->out_ctx_dma = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
(unsigned long long)dma);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
/* Allocate the (input) device context for address device command */
dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
if (!dev->in_ctx)
goto fail;
dev->in_ctx_dma = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
(unsigned long long)dma);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
/* Allocate endpoint 0 ring */
dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
if (!dev->ep_rings[0])
goto fail;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
init_completion(&dev->cmd_completion);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
/*
* Point to output device context in dcbaa; skip the output control
* context, which is eight 32 bit fields (or 32 bytes long)
*/
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci->dcbaa->dev_context_ptrs[slot_id] =
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
(u32) dev->out_ctx_dma + (32);
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
slot_id,
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
&xhci->dcbaa->dev_context_ptrs[slot_id],
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
(unsigned long long)dev->out_ctx_dma);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
return 1;
fail:
xhci_free_virt_device(xhci, slot_id);
return 0;
}
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct usb_device *top_dev;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
if (udev->slot_id == 0 || !dev) {
xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
udev->slot_id);
return -EINVAL;
}
ep0_ctx = &dev->in_ctx->ep[0];
/* 2) New slot context and endpoint 0 context are valid*/
dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
/* 3) Only the control endpoint is valid - one endpoint context */
dev->in_ctx->slot.dev_info |= LAST_CTX(1);
switch (udev->speed) {
case USB_SPEED_SUPER:
dev->in_ctx->slot.dev_info |= (u32) udev->route;
dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
break;
case USB_SPEED_HIGH:
dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
break;
case USB_SPEED_FULL:
dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
break;
case USB_SPEED_LOW:
dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
break;
case USB_SPEED_VARIABLE:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
return -EINVAL;
break;
default:
/* Speed was set earlier, this shouldn't happen. */
BUG();
}
/* Find the root hub port this device is under */
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
/* Is this a LS/FS device under a HS hub? */
/*
* FIXME: I don't think this is right, where does the TT info for the
* roothub or parent hub come from?
*/
if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
udev->tt) {
dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
dev->in_ctx->slot.tt_info |= udev->ttport << 8;
}
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
/* Step 4 - ring already allocated */
/* Step 5 */
ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
/*
* See section 4.3 bullet 6:
* The default Max Packet size for ep0 is "8 bytes for a USB2
* LS/FS/HS device or 512 bytes for a USB3 SS device"
* XXX: Not sure about wireless USB devices.
*/
if (udev->speed == USB_SPEED_SUPER)
ep0_ctx->ep_info2 |= MAX_PACKET(512);
else
ep0_ctx->ep_info2 |= MAX_PACKET(8);
/* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
ep0_ctx->deq =
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
dev->ep_rings[0]->first_seg->dma;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
return 0;
}
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
* is set to N, it will service the endpoint every 2^(Interval)*125us.
*
* The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
* is set to 0.
*/
static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
unsigned int interval = 0;
switch (udev->speed) {
case USB_SPEED_HIGH:
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc))
interval = ep->desc.bInterval;
/* Fall through - SS and HS isoc/int have same decoding */
case USB_SPEED_SUPER:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
if (ep->desc.bInterval == 0)
interval = 0;
else
interval = ep->desc.bInterval - 1;
if (interval > 15)
interval = 15;
if (interval != ep->desc.bInterval + 1)
dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
ep->desc.bEndpointAddress, 1 << interval);
}
break;
/* Convert bInterval (in 1-255 frames) to microframes and round down to
* nearest power of 2.
*/
case USB_SPEED_FULL:
case USB_SPEED_LOW:
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
interval = fls(8*ep->desc.bInterval) - 1;
if (interval > 10)
interval = 10;
if (interval < 3)
interval = 3;
if ((1 << interval) != 8*ep->desc.bInterval)
dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
ep->desc.bEndpointAddress, 1 << interval);
}
break;
default:
BUG();
}
return EP_INTERVAL(interval);
}
static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
int in;
u32 type;
in = usb_endpoint_dir_in(&ep->desc);
if (usb_endpoint_xfer_control(&ep->desc)) {
type = EP_TYPE(CTRL_EP);
} else if (usb_endpoint_xfer_bulk(&ep->desc)) {
if (in)
type = EP_TYPE(BULK_IN_EP);
else
type = EP_TYPE(BULK_OUT_EP);
} else if (usb_endpoint_xfer_isoc(&ep->desc)) {
if (in)
type = EP_TYPE(ISOC_IN_EP);
else
type = EP_TYPE(ISOC_OUT_EP);
} else if (usb_endpoint_xfer_int(&ep->desc)) {
if (in)
type = EP_TYPE(INT_IN_EP);
else
type = EP_TYPE(INT_OUT_EP);
} else {
BUG();
}
return type;
}
int xhci_endpoint_init(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *udev,
USB: xhci: Respect critical sections. Narrow down time spent holding the xHCI spinlock so that it's only used to protect the xHCI rings, not as mutual exclusion. Stop allocating memory while holding the spinlock and calling xhci_alloc_virt_device() and xhci_endpoint_init(). The USB core should have locking in it to prevent device state to be manipulated by more than one kernel thread. E.g. you can't free a device while you're in the middle of setting a new configuration. So removing the locks from the sections where xhci_alloc_dev() and xhci_reset_bandwidth() touch xHCI's representation of the device should be OK. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-14 20:44:22 +02:00
struct usb_host_endpoint *ep,
gfp_t mem_flags)
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int max_packet;
unsigned int max_burst;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = &virt_dev->in_ctx->ep[ep_index];
/* Set up the endpoint ring */
USB: xhci: Respect critical sections. Narrow down time spent holding the xHCI spinlock so that it's only used to protect the xHCI rings, not as mutual exclusion. Stop allocating memory while holding the spinlock and calling xhci_alloc_virt_device() and xhci_endpoint_init(). The USB core should have locking in it to prevent device state to be manipulated by more than one kernel thread. E.g. you can't free a device while you're in the middle of setting a new configuration. So removing the locks from the sections where xhci_alloc_dev() and xhci_reset_bandwidth() touch xHCI's representation of the device should be OK. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-14 20:44:22 +02:00
virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
if (!virt_dev->new_ep_rings[ep_index])
return -ENOMEM;
ep_ring = virt_dev->new_ep_rings[ep_index];
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
/* FIXME dig Mult and streams info out of ep companion desc */
USB: xhci: Setup HW retries correctly. The xHCI host controller can be programmed to retry a transfer a certain number of times per endpoint before it passes back an error condition to the host controller driver. The xHC will return an error code when the error count transitions from 1 to 0. Programming an error count of 3 means the xHC tries the transfer 3 times, programming it with a 1 means it tries to transfer once, and programming it with 0 means the HW tries the transfer infinitely. We want isochronous transfers to only be tried once, so set the error count to one. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:04:27 +02:00
/* Allow 3 retries for everything but isoc;
* error count = 0 means infinite retries.
*/
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
if (!usb_endpoint_xfer_isoc(&ep->desc))
ep_ctx->ep_info2 = ERROR_COUNT(3);
else
USB: xhci: Setup HW retries correctly. The xHCI host controller can be programmed to retry a transfer a certain number of times per endpoint before it passes back an error condition to the host controller driver. The xHC will return an error code when the error count transitions from 1 to 0. Programming an error count of 3 means the xHC tries the transfer 3 times, programming it with a 1 means it tries to transfer once, and programming it with 0 means the HW tries the transfer infinitely. We want isochronous transfers to only be tried once, so set the error count to one. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:04:27 +02:00
ep_ctx->ep_info2 = ERROR_COUNT(1);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
/* Set the max packet size and max burst */
switch (udev->speed) {
case USB_SPEED_SUPER:
max_packet = ep->desc.wMaxPacketSize;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
USB: xhci: Bulk transfer support Allow device drivers to submit URBs to bulk endpoints on devices under an xHCI host controller. Share code between the control and bulk enqueueing functions when it makes sense. To get the best performance out of bulk transfers, SuperSpeed devices must have the bMaxBurst size copied from their endpoint companion controller into the xHCI device context. This allows the host controller to "burst" up to 16 packets before it has to wait for the device to acknowledge the first packet. The buffers in Transfer Request Blocks (TRBs) can cross page boundaries, but they cannot cross 64KB boundaries. The buffer must be broken into multiple TRBs if a 64KB boundary is crossed. The sum of buffer lengths in all the TRBs in a Transfer Descriptor (TD) cannot exceed 64MB. To work around this, the enqueueing code must enqueue multiple TDs. The transfer event handler may incorrectly give back the URB in this case, if it gets a transfer event that points somewhere in the first TD. FIXME later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:50 +02:00
/* dig out max burst from ep companion desc */
USB: Change names of SuperSpeed ep companion descriptor structs. Differentiate between SuperSpeed endpoint companion descriptor and the wireless USB endpoint companion descriptor. Make all structure names for this descriptor have "ss" (SuperSpeed) in them. David Vrabel asked for this change in http://marc.info/?l=linux-usb&m=124091465109367&w=2 Reported-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:06:20 +02:00
max_packet = ep->ss_ep_comp->desc.bMaxBurst;
USB: xhci: Bulk transfer support Allow device drivers to submit URBs to bulk endpoints on devices under an xHCI host controller. Share code between the control and bulk enqueueing functions when it makes sense. To get the best performance out of bulk transfers, SuperSpeed devices must have the bMaxBurst size copied from their endpoint companion controller into the xHCI device context. This allows the host controller to "burst" up to 16 packets before it has to wait for the device to acknowledge the first packet. The buffers in Transfer Request Blocks (TRBs) can cross page boundaries, but they cannot cross 64KB boundaries. The buffer must be broken into multiple TRBs if a 64KB boundary is crossed. The sum of buffer lengths in all the TRBs in a Transfer Descriptor (TD) cannot exceed 64MB. To work around this, the enqueueing code must enqueue multiple TDs. The transfer event handler may incorrectly give back the URB in this case, if it gets a transfer event that points somewhere in the first TD. FIXME later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:50 +02:00
ep_ctx->ep_info2 |= MAX_BURST(max_packet);
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
break;
case USB_SPEED_HIGH:
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
if (usb_endpoint_xfer_isoc(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
ep_ctx->ep_info2 |= MAX_BURST(max_burst);
}
/* Fall through */
case USB_SPEED_FULL:
case USB_SPEED_LOW:
max_packet = ep->desc.wMaxPacketSize & 0x3ff;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
break;
default:
BUG();
}
/* FIXME Debug endpoint context */
return 0;
}
void xhci_endpoint_zero(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_host_endpoint *ep)
{
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = &virt_dev->in_ctx->ep[ep_index];
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
ep_ctx->deq = 0;
USB: xhci: Bandwidth allocation support Since the xHCI host controller hardware (xHC) has an internal schedule, it needs a better representation of what devices are consuming bandwidth on the bus. Each device is represented by a device context, with data about the device, endpoints, and pointers to each endpoint ring. We need to update the endpoint information for a device context before a new configuration or alternate interface setting is selected. We setup an input device context with modified endpoint information and newly allocated endpoint rings, and then submit a Configure Endpoint Command to the hardware. The host controller can reject the new configuration if it exceeds the bus bandwidth, or the host controller doesn't have enough internal resources for the configuration. If the command fails, we still have the older device context with the previous configuration. If the command succeeds, we free the old endpoint rings. The root hub isn't a real device, so always say yes to any bandwidth changes for it. The USB core will enable, disable, and then enable endpoint 0 several times during the initialization sequence. The device will always have an endpoint ring for endpoint 0 and bandwidth allocated for that, unless the device is disconnected or gets a SetAddress 0 request. So we don't pay attention for when xhci_check_bandwidth() is called for a re-add of endpoint 0. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:58:38 +02:00
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
int size;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
int i;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* Free the Event Ring Segment Table and the actual Event Ring */
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
xhci->erst.entries, xhci->erst.erst_dma_addr);
xhci->erst.entries = NULL;
xhci_dbg(xhci, "Freed ERST\n");
if (xhci->event_ring)
xhci_ring_free(xhci, xhci->event_ring);
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci_dbg(xhci, "Freed command ring\n");
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
for (i = 1; i < MAX_HC_SLOTS; ++i)
xhci_free_virt_device(xhci, i);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
if (xhci->segment_pool)
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
xhci_dbg(xhci, "Freed segment pool\n");
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
if (xhci->device_pool)
dma_pool_destroy(xhci->device_pool);
xhci->device_pool = NULL;
xhci_dbg(xhci, "Freed device context pool\n");
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:53:42 +02:00
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
xhci->page_size = 0;
xhci->page_shift = 0;
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
dma_addr_t dma;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
unsigned int val, val2;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
u64 val_64;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
struct xhci_segment *seg;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
u32 page_size;
int i;
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
if ((0x1 & page_size) != 0)
break;
page_size = page_size >> 1;
}
if (i < 16)
xhci_dbg(xhci, "Supported page size of %iK\n", (1 << (i+12)) / 1024);
else
xhci_warn(xhci, "WARN: no supported page size\n");
/* Use 4K pages, since that's common and the minimum the HC supports */
xhci->page_shift = 12;
xhci->page_size = 1 << xhci->page_shift;
xhci_dbg(xhci, "HCD page size set to %iK\n", xhci->page_size / 1024);
/*
* Program the Number of Device Slots Enabled field in the CONFIG
* register with the max value of slots the HC can handle.
*/
val = HCS_MAX_SLOTS(xhci_readl(xhci, &xhci->cap_regs->hcs_params1));
xhci_dbg(xhci, "// xHC can handle at most %d device slots.\n",
(unsigned int) val);
val2 = xhci_readl(xhci, &xhci->op_regs->config_reg);
val |= (val2 & ~HCS_SLOTS_MASK);
xhci_dbg(xhci, "// Setting Max device slots reg = 0x%x.\n",
(unsigned int) val);
xhci_writel(xhci, val, &xhci->op_regs->config_reg);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:53:42 +02:00
/*
* Section 5.4.8 - doorbell array must be
* "physically contiguous and 64-byte (cache line) aligned".
*/
xhci->dcbaa = pci_alloc_consistent(to_pci_dev(dev),
sizeof(*xhci->dcbaa), &dma);
if (!xhci->dcbaa)
goto fail;
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
xhci->dcbaa->dma = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
USB: xhci: Device context array allocation. Instead of keeping a "frame list" like older host controllers, the xHCI host controller keeps internal representations of the USB devices, with a transfer ring per endpoint. The host controller queues Transfer Request Blocks (TRBs) to the endpoint ring, and then "rings the doorbell" for that device. The host controller processes the transfer, places a transfer completion event on the event ring, and interrupts the system. The device context base address array must be allocated by the xHCI host controller driver, along with the device contexts it points to. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:53:42 +02:00
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/*
* Initialize the ring segment pool. The ring must be a contiguous
* structure comprised of TRBs. The TRBs must be 16 byte aligned,
* however, the command ring segment needs 64-byte aligned segments,
* so we pick the greater alignment need.
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
/* See Table 46 and Note on Figure 55 */
/* FIXME support 64-byte contexts */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
sizeof(struct xhci_device_control),
64, xhci->page_size);
if (!xhci->segment_pool || !xhci->device_pool)
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
goto fail;
/* Set up the command ring to have one segments for now. */
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
if (!xhci->cmd_ring)
goto fail;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* Set the address in the Command Ring Control register */
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
xhci->cmd_ring->cycle_state;
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
xhci_dbg_cmd_ptrs(xhci);
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
val &= DBOFF_MASK;
xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
" from cap regs base addr\n", val);
xhci->dba = (void *) xhci->cap_regs + val;
xhci_dbg_regs(xhci);
xhci_print_run_regs(xhci);
/* Set ir_set to interrupt register set 0 */
xhci->ir_set = (void *) xhci->run_regs->ir_set;
/*
* Event ring setup: Allocate a normal ring, but also setup
* the event ring segment table (ERST). Section 4.9.3.
*/
xhci_dbg(xhci, "// Allocating event ring\n");
xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, false, flags);
if (!xhci->event_ring)
goto fail;
xhci->erst.entries = pci_alloc_consistent(to_pci_dev(dev),
sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS, &dma);
if (!xhci->erst.entries)
goto fail;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "// Allocated event ring segment table at 0x%llx\n",
(unsigned long long)dma);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS);
xhci->erst.num_entries = ERST_NUM_SEGS;
xhci->erst.erst_dma_addr = dma;
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx\n",
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
xhci->erst.num_entries,
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci->erst.entries,
(unsigned long long)xhci->erst.erst_dma_addr);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* set ring base address and size for each segment table entry */
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
entry->seg_addr = seg->dma;
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
entry->seg_size = TRBS_PER_SEGMENT;
entry->rsvd = 0;
seg = seg->next;
}
/* set ERST count with the number of entries in the segment table */
val = xhci_readl(xhci, &xhci->ir_set->erst_size);
val &= ERST_SIZE_MASK;
val |= ERST_NUM_SEGS;
xhci_dbg(xhci, "// Write ERST size = %i to ir_set 0 (some bits preserved)\n",
val);
xhci_writel(xhci, val, &xhci->ir_set->erst_size);
xhci_dbg(xhci, "// Set ERST entries to point to event ring.\n");
/* set the segment table base address */
USB: xhci: fix lots of compiler warnings. Turns out someone never built this code on a 64bit platform. Someone owes me a beer... Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:14:08 +02:00
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
(unsigned long long)xhci->erst.erst_dma_addr);
USB: xhci: Represent 64-bit addresses with one u64. There are several xHCI data structures that use two 32-bit fields to represent a 64-bit address. Since some architectures don't support 64-bit PCI writes, the fields need to be written in two 32-bit writes. The xHCI specification says that if a platform is incapable of generating 64-bit writes, software must write the low 32-bits first, then the high 32-bits. Hardware that supports 64-bit addressing will wait for the high 32-bit write before reading the revised value, and hardware that only supports 32-bit writes will ignore the high 32-bit write. Previous xHCI code represented 64-bit addresses with two u32 values. This lead to buggy code that would write the 32-bits in the wrong order, or forget to write the upper 32-bits. Change the two u32s to one u64 and create a function call to write all 64-bit addresses in the proper order. This new function could be modified in the future if all platforms support 64-bit writes. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27 21:03:31 +02:00
val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
val_64 &= ERST_PTR_MASK;
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
/* Set the event ring dequeue address */
USB: xhci: Avoid global namespace pollution. Make all globally visible functions start with xhci_ and mark functions as static if they're only called within the same C file. Fix some long lines while we're at it. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 04:05:20 +02:00
xhci_set_hc_event_deq(xhci);
USB: xhci: Ring allocation and initialization. Allocate basic xHCI host controller data structures. For every xHC, there is a command ring, an event ring, and a doorbell array. The doorbell array is used to notify the host controller that work has been enqueued onto one of the rings. The host controller driver enqueues commands on the command ring. The HW enqueues command completion events on the event ring and interrupts the system (currently using PCI interrupts, although the xHCI HW will use MSI interrupts eventually). All rings and the doorbell array must be allocated by the xHCI host controller driver. Each ring is comprised of one or more segments, which consists of 16-byte Transfer Request Blocks (TRBs) that can be chained to form a Transfer Descriptor (TD) that represents a multiple-buffer request. Segments are linked into a ring using Link TRBs, which means they are dynamically growable. The producer of the ring enqueues a TD by writing one or more TRBs in the ring and toggling the TRB cycle bit for each TRB. The consumer knows it can process the TRB when the cycle bit matches its internal consumer cycle state for the ring. The consumer cycle state is toggled an odd amount of times in the ring. An example ring (a ring must have a minimum of 16 TRBs on it, but that's too big to draw in ASCII art): chain cycle bit bit ------------------------ | TD A TRB 1 | 1 | 1 |<------------- <-- consumer dequeue ptr ------------------------ | consumer cycle state = 1 | TD A TRB 2 | 1 | 1 | | ------------------------ | | TD A TRB 3 | 0 | 1 | segment 1 | ------------------------ | | TD B TRB 1 | 1 | 1 | | ------------------------ | | TD B TRB 2 | 0 | 1 | | ------------------------ | | Link TRB | 0 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD C TRB 1 | 0 | 1 |<---- | ------------------------ | | TD D TRB 1 | 1 | 1 | | ------------------------ | | TD D TRB 2 | 1 | 1 | segment 2 | ------------------------ | | TD D TRB 3 | 1 | 1 | | ------------------------ | | TD D TRB 4 | 1 | 1 | | ------------------------ | | Link TRB | 1 | 1 |----- | ------------------------ | | | | chain cycle | | bit bit | | ------------------------ | | | TD D TRB 5 | 1 | 1 |<---- | ------------------------ | | TD D TRB 6 | 0 | 1 | | ------------------------ | | TD E TRB 1 | 0 | 1 | segment 3 | ------------------------ | | | 0 | 0 | | <-- producer enqueue ptr ------------------------ | | | 0 | 0 | | ------------------------ | | Link TRB | 0 | 0 |--------------- ------------------------ Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:34 +02:00
xhci_dbg(xhci, "Wrote ERST address to ir_set 0.\n");
xhci_print_ir_set(xhci, xhci->ir_set, 0);
/*
* XXX: Might need to set the Interrupter Moderation Register to
* something other than the default (~1ms minimum between interrupts).
* See section 5.5.1.2.
*/
USB: xhci: Allocate and address USB devices xHCI needs to get a "Slot ID" from the host controller and allocate other data structures for every USB device. Make usb_alloc_dev() and usb_release_dev() allocate and free these device structures. After setting up the xHC device structures, usb_alloc_dev() must wait for the hardware to respond to an Enable Slot command. usb_alloc_dev() fires off a Disable Slot command and does not wait for it to complete. When the USB core wants to choose an address for the device, the xHCI driver must issue a Set Address command and wait for an event for that command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:57:38 +02:00
init_completion(&xhci->addr_dev);
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = 0;
USB: xhci: BIOS handoff and HW initialization. Add PCI initialization code to take control of the xHCI host controller away from the BIOS, halt, and reset the host controller. The xHCI spec says that BIOSes must give up the host controller within 5 seconds. Add some host controller glue functions to handle hardware initialization and memory allocation for the host controller. The current xHCI prototypes use PCI interrupts, but the xHCI spec requires MSI-X interrupts. Add code to support MSI-X interrupts, but use the PCI interrupts for now. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 04:52:28 +02:00
return 0;
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
Reference in a new issue Copy permalink