kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-hardened/drivers/pinctrl/pinctrl-adi2.c

1148 lines
29 KiB
C
Raw Normal View History

pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
/*
* Pinctrl Driver for ADI GPIO2 controller
*
* Copyright 2007-2013 Analog Devices Inc.
*
* Licensed under the GPLv2 or later
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <linux/platform_data/pinctrl-adi2.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/syscore_ops.h>
#include <linux/gpio.h>
#include <asm/portmux.h>
#include "pinctrl-adi2.h"
#include "core.h"
/*
According to the BF54x HRM, pint means "pin interrupt".
http://www.analog.com/static/imported-files/processor_manuals/ADSP-BF54x_hwr_rev1.2.pdf
ADSP-BF54x processor Blackfin processors have four SIC interrupt chan-
nels dedicated to pin interrupt purposes. These channels are managed by
four hardware blocks, called PINT0, PINT1, PINT2, and PINT3. Every PINTx
block can sense to up to 32 pins. While PINT0 and PINT1 can sense the
pins of port A and port B, PINT2 and PINT3 manage all the pins from port
C to port J as shown in Figure 9-2.
n BF54x HRM:
The ten GPIO ports are subdivided into 8-bit half ports, resulting in lower and
upper half 8-bit units. The PINTx_ASSIGN registers control the 8-bit multi-
plexers shown in Figure 9-3. Lower half units of eight pins can be
forwarded to either byte 0 or byte 2 of either associated PINTx block.
Upper half units can be forwarded to either byte 1 or byte 3 of the pin
interrupt blocks, without further restrictions.
All MMR registers in the pin interrupt module are 32 bits wide. To simply the
mapping logic, this driver only maps a 16-bit gpio port to the upper or lower
16 bits of a PINTx block. You can find the Figure 9-3 on page 583.
Each IRQ domain is binding to a GPIO bank device. 2 GPIO bank devices can map
to one PINT device. Two in "struct gpio_pint" are used to ease the PINT
interrupt handler.
The GPIO bank mapping to the lower 16 bits of the PINT device set its IRQ
domain pointer in domain[0]. The IRQ domain pointer of the other bank is set
to domain[1]. PINT interrupt handler adi_gpio_handle_pint_irq() finds out
the current domain pointer according to whether the interrupt request mask
is in lower 16 bits (domain[0]) or upper 16bits (domain[1]).
A PINT device is not part of a GPIO port device in Blackfin. Multiple GPIO
port devices can be mapped to the same PINT device.
*/
static LIST_HEAD(adi_pint_list);
static LIST_HEAD(adi_gpio_port_list);
#define DRIVER_NAME "pinctrl-adi2"
#define PINT_HI_OFFSET 16
/**
* struct gpio_port_saved - GPIO port registers that should be saved between
* power suspend and resume operations.
*
* @fer: PORTx_FER register
* @data: PORTx_DATA register
* @dir: PORTx_DIR register
* @inen: PORTx_INEN register
* @mux: PORTx_MUX register
*/
struct gpio_port_saved {
u16 fer;
u16 data;
u16 dir;
u16 inen;
u32 mux;
};
pinctrl: Move pint PM storage structure out of blackfin architecture. It is better to keep this structure in the pinctrl-adi2 driver. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-27 11:23:54 +01:00
/*
* struct gpio_pint_saved - PINT registers saved in PM operations
*
* @assign: ASSIGN register
* @edge_set: EDGE_SET register
* @invert_set: INVERT_SET register
*/
struct gpio_pint_saved {
u32 assign;
u32 edge_set;
u32 invert_set;
};
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
/**
* struct gpio_pint - Pin interrupt controller device. Multiple ADI GPIO
* banks can be mapped into one Pin interrupt controller.
*
* @node: All gpio_pint instances are added to a global list.
* @base: PINT device register base address
* @irq: IRQ of the PINT device, it is the parent IRQ of all
* GPIO IRQs mapping to this device.
* @domain: [0] irq domain of the gpio port, whose hardware interrupts are
* mapping to the low 16-bit of the pint registers.
* [1] irq domain of the gpio port, whose hardware interrupts are
* mapping to the high 16-bit of the pint registers.
* @regs: address pointer to the PINT device
* @map_count: No more than 2 GPIO banks can be mapped to this PINT device.
* @lock: This lock make sure the irq_chip operations to one PINT device
* for different GPIO interrrupts are atomic.
* @pint_map_port: Set up the mapping between one PINT device and
* multiple GPIO banks.
*/
struct gpio_pint {
struct list_head node;
void __iomem *base;
int irq;
struct irq_domain *domain[2];
struct gpio_pint_regs *regs;
pinctrl: Move pint PM storage structure out of blackfin architecture. It is better to keep this structure in the pinctrl-adi2 driver. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-27 11:23:54 +01:00
struct gpio_pint_saved saved_data;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
int map_count;
spinlock_t lock;
int (*pint_map_port)(struct gpio_pint *pint, bool assign,
u8 map, struct irq_domain *domain);
};
/**
* ADI pin controller
*
* @dev: a pointer back to containing device
* @pctl: the pinctrl device
* @soc: SoC data for this specific chip
*/
struct adi_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
const struct adi_pinctrl_soc_data *soc;
};
/**
* struct gpio_port - GPIO bank device. Multiple ADI GPIO banks can be mapped
* into one pin interrupt controller.
*
* @node: All gpio_port instances are added to a list.
* @base: GPIO bank device register base address
* @irq_base: base IRQ of the GPIO bank device
* @width: PIN number of the GPIO bank device
* @regs: address pointer to the GPIO bank device
* @saved_data: registers that should be saved between PM operations.
* @dev: device structure of this GPIO bank
* @pint: GPIO PINT device that this GPIO bank mapped to
* @pint_map: GIOP bank mapping code in PINT device
* @pint_assign: The 32-bit PINT registers can be divided into 2 parts. A
* GPIO bank can be mapped into either low 16 bits[0] or high 16
* bits[1] of each PINT register.
* @lock: This lock make sure the irq_chip operations to one PINT device
* for different GPIO interrrupts are atomic.
* @chip: abstract a GPIO controller
* @domain: The irq domain owned by the GPIO port.
* @rsvmap: Reservation map array for each pin in the GPIO bank
*/
struct gpio_port {
struct list_head node;
void __iomem *base;
pinctrl-adi2: change irq_base from usigned int to int Negative irq_base means this gpio port doens't support interrupts. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-27 11:23:55 +01:00
int irq_base;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
unsigned int width;
struct gpio_port_t *regs;
struct gpio_port_saved saved_data;
struct device *dev;
struct gpio_pint *pint;
u8 pint_map;
bool pint_assign;
spinlock_t lock;
struct gpio_chip chip;
struct irq_domain *domain;
};
static inline u8 pin_to_offset(struct pinctrl_gpio_range *range, unsigned pin)
{
return pin - range->pin_base;
}
static inline u32 hwirq_to_pintbit(struct gpio_port *port, int hwirq)
{
return port->pint_assign ? BIT(hwirq) << PINT_HI_OFFSET : BIT(hwirq);
}
static struct gpio_pint *find_gpio_pint(unsigned id)
{
struct gpio_pint *pint;
int i = 0;
list_for_each_entry(pint, &adi_pint_list, node) {
if (id == i)
return pint;
i++;
}
return NULL;
}
static inline void port_setup(struct gpio_port *port, unsigned offset,
bool use_for_gpio)
{
struct gpio_port_t *regs = port->regs;
if (use_for_gpio)
writew(readw(&regs->port_fer) & ~BIT(offset),
&regs->port_fer);
else
writew(readw(&regs->port_fer) | BIT(offset), &regs->port_fer);
}
static inline void portmux_setup(struct gpio_port *port, unsigned offset,
unsigned short function)
{
struct gpio_port_t *regs = port->regs;
u32 pmux;
pmux = readl(&regs->port_mux);
/* The function field of each pin has 2 consecutive bits in
* the mux register.
*/
pmux &= ~(0x3 << (2 * offset));
pmux |= (function & 0x3) << (2 * offset);
writel(pmux, &regs->port_mux);
}
static inline u16 get_portmux(struct gpio_port *port, unsigned offset)
{
struct gpio_port_t *regs = port->regs;
u32 pmux = readl(&regs->port_mux);
/* The function field of each pin has 2 consecutive bits in
* the mux register.
*/
return pmux >> (2 * offset) & 0x3;
}
static void adi_gpio_ack_irq(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
struct gpio_pint_regs *regs = port->pint->regs;
unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
if (readl(&regs->invert_set) & pintbit)
writel(pintbit, &regs->invert_clear);
else
writel(pintbit, &regs->invert_set);
}
writel(pintbit, &regs->request);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static void adi_gpio_mask_ack_irq(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
struct gpio_pint_regs *regs = port->pint->regs;
unsigned pintbit = hwirq_to_pintbit(port, d->hwirq);
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
if (readl(&regs->invert_set) & pintbit)
writel(pintbit, &regs->invert_clear);
else
writel(pintbit, &regs->invert_set);
}
writel(pintbit, &regs->request);
writel(pintbit, &regs->mask_clear);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static void adi_gpio_mask_irq(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
struct gpio_pint_regs *regs = port->pint->regs;
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
writel(hwirq_to_pintbit(port, d->hwirq), &regs->mask_clear);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static void adi_gpio_unmask_irq(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
struct gpio_pint_regs *regs = port->pint->regs;
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
writel(hwirq_to_pintbit(port, d->hwirq), &regs->mask_set);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static unsigned int adi_gpio_irq_startup(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
struct gpio_pint_regs *regs;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
if (!port) {
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
pr_err("GPIO IRQ %d :Not exist\n", d->irq);
gpio: switch drivers to use new callback This switches all GPIO and pin control drivers with irqchips that were using .startup() and .shutdown() callbacks to lock GPIO lines for IRQ usage over to using the .request_resources() and .release_resources() callbacks just introduced into the irqchip vtable. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 18:16:20 +01:00
/* FIXME: negative return code will be ignored */
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
return -ENODEV;
}
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
regs = port->pint->regs;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
port_setup(port, d->hwirq, true);
writew(BIT(d->hwirq), &port->regs->dir_clear);
writew(readw(&port->regs->inen) | BIT(d->hwirq), &port->regs->inen);
writel(hwirq_to_pintbit(port, d->hwirq), &regs->mask_set);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static void adi_gpio_irq_shutdown(struct irq_data *d)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
struct gpio_pint_regs *regs = port->pint->regs;
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
writel(hwirq_to_pintbit(port, d->hwirq), &regs->mask_clear);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static int adi_gpio_irq_type(struct irq_data *d, unsigned int type)
{
unsigned long flags;
struct gpio_port *port = irq_data_get_irq_chip_data(d);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
struct gpio_pint_regs *pint_regs;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
unsigned pintmask;
unsigned int irq = d->irq;
int ret = 0;
char buf[16];
if (!port) {
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
pr_err("GPIO IRQ %d :Not exist\n", d->irq);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
return -ENODEV;
}
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
pint_regs = port->pint->regs;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
pintmask = hwirq_to_pintbit(port, d->hwirq);
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_lock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
/* In case of interrupt autodetect, set irq type to edge sensitive. */
if (type == IRQ_TYPE_PROBE)
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
pinctrl: pinctrl-adi2.c: Cleaning up wrong format string usage %d in format string used, but the type is unsigned int This was found using a static code analysis program called cppcheck Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-26 18:57:14 +02:00
snprintf(buf, 16, "gpio-irq%u", irq);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
port_setup(port, d->hwirq, true);
} else
goto out;
/* The GPIO interrupt is triggered only when its input value
* transfer from 0 to 1. So, invert the input value if the
* irq type is low or falling
*/
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
writel(pintmask, &pint_regs->invert_set);
else
writel(pintmask, &pint_regs->invert_clear);
/* In edge sensitive case, if the input value of the requested irq
* is already 1, invert it.
*/
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
if (gpio_get_value(port->chip.base + d->hwirq))
writel(pintmask, &pint_regs->invert_set);
else
writel(pintmask, &pint_regs->invert_clear);
}
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
writel(pintmask, &pint_regs->edge_set);
__irq_set_handler_locked(irq, handle_edge_irq);
} else {
writel(pintmask, &pint_regs->edge_clear);
__irq_set_handler_locked(irq, handle_level_irq);
}
out:
pinctrl: pinctrl-adi2: Remove nested lock+irqsave that resue flags. Also avoid use NULL pointer in error message. v2-changes: - use port pinter only after checking Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:30:21 +02:00
spin_unlock(&port->pint->lock);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
#ifdef CONFIG_PM
static int adi_gpio_set_wake(struct irq_data *d, unsigned int state)
{
struct gpio_port *port = irq_data_get_irq_chip_data(d);
if (!port || !port->pint || port->pint->irq != d->irq)
return -EINVAL;
#ifndef SEC_GCTL
adi_internal_set_wake(port->pint->irq, state);
#endif
return 0;
}
static int adi_pint_suspend(void)
{
struct gpio_pint *pint;
list_for_each_entry(pint, &adi_pint_list, node) {
writel(0xffffffff, &pint->regs->mask_clear);
pint->saved_data.assign = readl(&pint->regs->assign);
pint->saved_data.edge_set = readl(&pint->regs->edge_set);
pint->saved_data.invert_set = readl(&pint->regs->invert_set);
}
return 0;
}
static void adi_pint_resume(void)
{
struct gpio_pint *pint;
list_for_each_entry(pint, &adi_pint_list, node) {
writel(pint->saved_data.assign, &pint->regs->assign);
writel(pint->saved_data.edge_set, &pint->regs->edge_set);
writel(pint->saved_data.invert_set, &pint->regs->invert_set);
}
}
static int adi_gpio_suspend(void)
{
struct gpio_port *port;
list_for_each_entry(port, &adi_gpio_port_list, node) {
port->saved_data.fer = readw(&port->regs->port_fer);
port->saved_data.mux = readl(&port->regs->port_mux);
port->saved_data.data = readw(&port->regs->data);
port->saved_data.inen = readw(&port->regs->inen);
port->saved_data.dir = readw(&port->regs->dir_set);
}
return adi_pint_suspend();
}
static void adi_gpio_resume(void)
{
struct gpio_port *port;
adi_pint_resume();
list_for_each_entry(port, &adi_gpio_port_list, node) {
writel(port->saved_data.mux, &port->regs->port_mux);
writew(port->saved_data.fer, &port->regs->port_fer);
writew(port->saved_data.inen, &port->regs->inen);
writew(port->saved_data.data & port->saved_data.dir,
&port->regs->data_set);
writew(port->saved_data.dir, &port->regs->dir_set);
}
}
static struct syscore_ops gpio_pm_syscore_ops = {
.suspend = adi_gpio_suspend,
.resume = adi_gpio_resume,
};
#else /* CONFIG_PM */
#define adi_gpio_set_wake NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
static inline void preflow_handler(struct irq_desc *desc)
{
if (desc->preflow_handler)
desc->preflow_handler(&desc->irq_data);
}
#else
static inline void preflow_handler(struct irq_desc *desc) { }
#endif
static void adi_gpio_handle_pint_irq(unsigned int inta_irq,
struct irq_desc *desc)
{
u32 request;
u32 level_mask, hwirq;
bool umask = false;
struct gpio_pint *pint = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct gpio_pint_regs *regs = pint->regs;
struct irq_domain *domain;
preflow_handler(desc);
chained_irq_enter(chip, desc);
request = readl(&regs->request);
level_mask = readl(&regs->edge_set) & request;
hwirq = 0;
domain = pint->domain[0];
while (request) {
/* domain pointer need to be changed only once at IRQ 16 when
* we go through IRQ requests from bit 0 to bit 31.
*/
if (hwirq == PINT_HI_OFFSET)
domain = pint->domain[1];
if (request & 1) {
if (level_mask & BIT(hwirq)) {
umask = true;
chained_irq_exit(chip, desc);
}
generic_handle_irq(irq_find_mapping(domain,
hwirq % PINT_HI_OFFSET));
}
hwirq++;
request >>= 1;
}
if (!umask)
chained_irq_exit(chip, desc);
}
static struct irq_chip adi_gpio_irqchip = {
.name = "GPIO",
.irq_ack = adi_gpio_ack_irq,
.irq_mask = adi_gpio_mask_irq,
.irq_mask_ack = adi_gpio_mask_ack_irq,
.irq_unmask = adi_gpio_unmask_irq,
.irq_disable = adi_gpio_mask_irq,
.irq_enable = adi_gpio_unmask_irq,
.irq_set_type = adi_gpio_irq_type,
.irq_startup = adi_gpio_irq_startup,
.irq_shutdown = adi_gpio_irq_shutdown,
.irq_set_wake = adi_gpio_set_wake,
};
static int adi_get_groups_count(struct pinctrl_dev *pctldev)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
return pinctrl->soc->ngroups;
}
static const char *adi_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
return pinctrl->soc->groups[selector].name;
}
static int adi_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
const unsigned **pins,
unsigned *num_pins)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
*pins = pinctrl->soc->groups[selector].pins;
*num_pins = pinctrl->soc->groups[selector].num;
return 0;
}
static struct pinctrl_ops adi_pctrl_ops = {
.get_groups_count = adi_get_groups_count,
.get_group_name = adi_get_group_name,
.get_group_pins = adi_get_group_pins,
};
pinctrl: clean up after enable refactoring commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Fan Wu <fwu@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-03 13:02:56 +02:00
static int adi_pinmux_set(struct pinctrl_dev *pctldev, unsigned func_id,
unsigned group_id)
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
struct gpio_port *port;
struct pinctrl_gpio_range *range;
unsigned long flags;
unsigned short *mux, pin;
pinctrl: pinctrl-adi: combine multiple groups of one function together The data pins of some peripheral are different if connecting to different devices in one pinmux function. In the PPI case, data pins can be used in 8, 16 and 24 pin groups individually. Add these groups into one ppi function. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-14 11:21:06 +01:00
mux = (unsigned short *)pinctrl->soc->groups[group_id].mux;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
while (*mux) {
pin = P_IDENT(*mux);
range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
if (range == NULL) /* should not happen */
return -ENODEV;
port = container_of(range->gc, struct gpio_port, chip);
spin_lock_irqsave(&port->lock, flags);
portmux_setup(port, pin_to_offset(range, pin),
pinctrl-adi2: fix coding style issue Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-27 11:23:56 +01:00
P_FUNCT2MUX(*mux));
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
port_setup(port, pin_to_offset(range, pin), false);
mux++;
spin_unlock_irqrestore(&port->lock, flags);
}
return 0;
}
static int adi_pinmux_get_funcs_count(struct pinctrl_dev *pctldev)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
return pinctrl->soc->nfunctions;
}
static const char *adi_pinmux_get_func_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
return pinctrl->soc->functions[selector].name;
}
static int adi_pinmux_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
const char * const **groups,
unsigned * const num_groups)
{
struct adi_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctldev);
*groups = pinctrl->soc->functions[selector].groups;
*num_groups = pinctrl->soc->functions[selector].num_groups;
return 0;
}
static int adi_pinmux_request_gpio(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned pin)
{
struct gpio_port *port;
unsigned long flags;
u8 offset;
port = container_of(range->gc, struct gpio_port, chip);
offset = pin_to_offset(range, pin);
spin_lock_irqsave(&port->lock, flags);
port_setup(port, offset, true);
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static struct pinmux_ops adi_pinmux_ops = {
pinctrl: clean up after enable refactoring commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Fan Wu <fwu@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-03 13:02:56 +02:00
.set_mux = adi_pinmux_set,
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
.get_functions_count = adi_pinmux_get_funcs_count,
.get_function_name = adi_pinmux_get_func_name,
.get_function_groups = adi_pinmux_get_groups,
.gpio_request_enable = adi_pinmux_request_gpio,
pinctrl: move strict option to pinmux_ops While the pinmux_ops are ideally just a vtable for pin mux calls, the "strict" setting belongs so intuitively with the pin multiplexing that we should move it here anyway. Putting it in the top pinctrl_desc makes no sense. Cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-06 14:19:13 +02:00
.strict = true,
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
};
static struct pinctrl_desc adi_pinmux_desc = {
.name = DRIVER_NAME,
.pctlops = &adi_pctrl_ops,
.pmxops = &adi_pinmux_ops,
.owner = THIS_MODULE,
};
static int adi_gpio_request(struct gpio_chip *chip, unsigned offset)
{
return pinctrl_request_gpio(chip->base + offset);
}
static void adi_gpio_free(struct gpio_chip *chip, unsigned offset)
{
pinctrl_free_gpio(chip->base + offset);
}
static int adi_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct gpio_port *port;
unsigned long flags;
port = container_of(chip, struct gpio_port, chip);
spin_lock_irqsave(&port->lock, flags);
writew(BIT(offset), &port->regs->dir_clear);
writew(readw(&port->regs->inen) | BIT(offset), &port->regs->inen);
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static void adi_gpio_set_value(struct gpio_chip *chip, unsigned offset,
int value)
{
struct gpio_port *port = container_of(chip, struct gpio_port, chip);
struct gpio_port_t *regs = port->regs;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
if (value)
pinctrl: pinctrl-adi2: disable IRQ when setting value GPIO output value should be set after the GPIO interrupt is disabled. Use BIT macro as well. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> [Edited commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:31:21 +02:00
writew(BIT(offset), &regs->data_set);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
else
pinctrl: pinctrl-adi2: disable IRQ when setting value GPIO output value should be set after the GPIO interrupt is disabled. Use BIT macro as well. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> [Edited commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:31:21 +02:00
writew(BIT(offset), &regs->data_clear);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
}
static int adi_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
struct gpio_port *port = container_of(chip, struct gpio_port, chip);
struct gpio_port_t *regs = port->regs;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
pinctrl: pinctrl-adi2: disable IRQ when setting value GPIO output value should be set after the GPIO interrupt is disabled. Use BIT macro as well. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> [Edited commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 09:31:21 +02:00
writew(readw(&regs->inen) & ~BIT(offset), &regs->inen);
if (value)
writew(BIT(offset), &regs->data_set);
else
writew(BIT(offset), &regs->data_clear);
writew(BIT(offset), &regs->dir_set);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static int adi_gpio_get_value(struct gpio_chip *chip, unsigned offset)
{
struct gpio_port *port = container_of(chip, struct gpio_port, chip);
struct gpio_port_t *regs = port->regs;
unsigned long flags;
int ret;
spin_lock_irqsave(&port->lock, flags);
ret = !!(readw(&regs->data) & BIT(offset));
spin_unlock_irqrestore(&port->lock, flags);
return ret;
}
static int adi_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct gpio_port *port = container_of(chip, struct gpio_port, chip);
if (port->irq_base >= 0)
return irq_find_mapping(port->domain, offset);
else
return irq_create_mapping(port->domain, offset);
}
static int adi_pint_map_port(struct gpio_pint *pint, bool assign, u8 map,
struct irq_domain *domain)
{
struct gpio_pint_regs *regs = pint->regs;
u32 map_mask;
if (pint->map_count > 1)
return -EINVAL;
pint->map_count++;
/* The map_mask of each gpio port is a 16-bit duplicate
* of the 8-bit map. It can be set to either high 16 bits or low
* 16 bits of the pint assignment register.
*/
map_mask = (map << 8) | map;
if (assign) {
map_mask <<= PINT_HI_OFFSET;
writel((readl(&regs->assign) & 0xFFFF) | map_mask,
&regs->assign);
} else
writel((readl(&regs->assign) & 0xFFFF0000) | map_mask,
&regs->assign);
pint->domain[assign] = domain;
return 0;
}
static int adi_gpio_pint_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct gpio_pint *pint;
pint = devm_kzalloc(dev, sizeof(struct gpio_pint), GFP_KERNEL);
if (!pint) {
dev_err(dev, "Memory alloc failed\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pinctrl: adi2: Convert to devm_ioremap_resource Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-24 09:46:11 +02:00
pint->base = devm_ioremap_resource(dev, res);
if (IS_ERR(pint->base))
return PTR_ERR(pint->base);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
pint->regs = (struct gpio_pint_regs *)pint->base;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(dev, "Invalid IRQ resource\n");
return -ENODEV;
}
spin_lock_init(&pint->lock);
pint->irq = res->start;
pint->pint_map_port = adi_pint_map_port;
platform_set_drvdata(pdev, pint);
pinctrl/adi2: Fix race in installing chained IRQ handler Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); | -irq_set_chained_handler(E1, E3); ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_chained_handler(E1, E3) != 0) - BUG(); ... | -irq_set_chained_handler(E1, E3); ... ) -irq_set_handler_data(E1, E2); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
2015-06-21 20:16:15 +02:00
irq_set_chained_handler_and_data(pint->irq, adi_gpio_handle_pint_irq,
pint);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
list_add_tail(&pint->node, &adi_pint_list);
return 0;
}
static int adi_gpio_pint_remove(struct platform_device *pdev)
{
struct gpio_pint *pint = platform_get_drvdata(pdev);
list_del(&pint->node);
irq_set_handler(pint->irq, handle_simple_irq);
return 0;
}
static int adi_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct gpio_port *port = d->host_data;
if (!port)
return -EINVAL;
irq_set_chip_data(irq, port);
irq_set_chip_and_handler(irq, &adi_gpio_irqchip,
handle_level_irq);
return 0;
}
pinctrl: adi2: Statize adi_gpio_irq_domain_ops It's only referenced in this file, make it static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-03 15:44:47 +02:00
static const struct irq_domain_ops adi_gpio_irq_domain_ops = {
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
.map = adi_gpio_irq_map,
.xlate = irq_domain_xlate_onecell,
};
static int adi_gpio_init_int(struct gpio_port *port)
{
struct device_node *node = port->dev->of_node;
struct gpio_pint *pint = port->pint;
int ret;
port->domain = irq_domain_add_linear(node, port->width,
&adi_gpio_irq_domain_ops, port);
if (!port->domain) {
dev_err(port->dev, "Failed to create irqdomain\n");
return -ENOSYS;
}
/* According to BF54x and BF60x HRM, pin interrupt devices are not
* part of the GPIO port device. in GPIO interrupt mode, the GPIO
* pins of multiple port devices can be routed into one pin interrupt
* device. The mapping can be configured by setting pint assignment
* register with the mapping value of different GPIO port. This is
* done via function pint_map_port().
*/
ret = pint->pint_map_port(port->pint, port->pint_assign,
port->pint_map, port->domain);
if (ret)
return ret;
if (port->irq_base >= 0) {
ret = irq_create_strict_mappings(port->domain, port->irq_base,
0, port->width);
if (ret) {
dev_err(port->dev, "Couldn't associate to domain\n");
return ret;
}
}
return 0;
}
#define DEVNAME_SIZE 16
static int adi_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct adi_pinctrl_gpio_platform_data *pdata;
struct resource *res;
struct gpio_port *port;
char pinctrl_devname[DEVNAME_SIZE];
static int gpio;
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-12 22:30:13 +02:00
int ret = 0;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
pdata = dev->platform_data;
if (!pdata)
return -EINVAL;
port = devm_kzalloc(dev, sizeof(struct gpio_port), GFP_KERNEL);
if (!port) {
dev_err(dev, "Memory alloc failed\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pinctrl: adi2: Convert to devm_ioremap_resource Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-24 09:46:11 +02:00
port->base = devm_ioremap_resource(dev, res);
if (IS_ERR(port->base))
return PTR_ERR(port->base);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res)
port->irq_base = -1;
else
port->irq_base = res->start;
port->width = pdata->port_width;
port->dev = dev;
port->regs = (struct gpio_port_t *)port->base;
port->pint_assign = pdata->pint_assign;
port->pint_map = pdata->pint_map;
port->pint = find_gpio_pint(pdata->pint_id);
if (port->pint) {
ret = adi_gpio_init_int(port);
if (ret)
return ret;
}
spin_lock_init(&port->lock);
platform_set_drvdata(pdev, port);
port->chip.label = "adi-gpio";
port->chip.direction_input = adi_gpio_direction_input;
port->chip.get = adi_gpio_get_value;
port->chip.direction_output = adi_gpio_direction_output;
port->chip.set = adi_gpio_set_value;
port->chip.request = adi_gpio_request;
port->chip.free = adi_gpio_free;
port->chip.to_irq = adi_gpio_to_irq;
if (pdata->port_gpio_base > 0)
port->chip.base = pdata->port_gpio_base;
else
port->chip.base = gpio;
port->chip.ngpio = port->width;
gpio = port->chip.base + port->width;
ret = gpiochip_add(&port->chip);
if (ret) {
dev_err(&pdev->dev, "Fail to add GPIO chip.\n");
goto out_remove_domain;
}
/* Add gpio pin range */
snprintf(pinctrl_devname, DEVNAME_SIZE, "pinctrl-adi2.%d",
pdata->pinctrl_id);
pinctrl_devname[DEVNAME_SIZE - 1] = 0;
ret = gpiochip_add_pin_range(&port->chip, pinctrl_devname,
0, pdata->port_pin_base, port->width);
if (ret) {
dev_err(&pdev->dev, "Fail to add pin range to %s.\n",
pinctrl_devname);
goto out_remove_gpiochip;
}
list_add_tail(&port->node, &adi_gpio_port_list);
return 0;
out_remove_gpiochip:
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-12 22:30:13 +02:00
gpiochip_remove(&port->chip);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
out_remove_domain:
if (port->pint)
irq_domain_remove(port->domain);
return ret;
}
static int adi_gpio_remove(struct platform_device *pdev)
{
struct gpio_port *port = platform_get_drvdata(pdev);
u8 offset;
list_del(&port->node);
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-12 22:30:13 +02:00
gpiochip_remove(&port->chip);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
if (port->pint) {
for (offset = 0; offset < port->width; offset++)
irq_dispose_mapping(irq_find_mapping(port->domain,
offset));
irq_domain_remove(port->domain);
}
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-12 22:30:13 +02:00
return 0;
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
}
static int adi_pinctrl_probe(struct platform_device *pdev)
{
struct adi_pinctrl *pinctrl;
pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
if (!pinctrl)
return -ENOMEM;
pinctrl->dev = &pdev->dev;
adi_pinctrl_soc_init(&pinctrl->soc);
adi_pinmux_desc.pins = pinctrl->soc->pins;
adi_pinmux_desc.npins = pinctrl->soc->npins;
/* Now register the pin controller and all pins it handles */
pinctrl->pctl = pinctrl_register(&adi_pinmux_desc, &pdev->dev, pinctrl);
pinctrl: make pinctrl_register() return proper error code Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-09 06:01:16 +02:00
if (IS_ERR(pinctrl->pctl)) {
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
dev_err(&pdev->dev, "could not register pinctrl ADI2 driver\n");
pinctrl: make pinctrl_register() return proper error code Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-09 06:01:16 +02:00
return PTR_ERR(pinctrl->pctl);
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-03 10:28:59 +02:00
}
platform_set_drvdata(pdev, pinctrl);
return 0;
}
static int adi_pinctrl_remove(struct platform_device *pdev)
{
struct adi_pinctrl *pinctrl = platform_get_drvdata(pdev);
pinctrl_unregister(pinctrl->pctl);
return 0;
}
static struct platform_driver adi_pinctrl_driver = {
.probe = adi_pinctrl_probe,
.remove = adi_pinctrl_remove,
.driver = {
.name = DRIVER_NAME,
},
};
static struct platform_driver adi_gpio_pint_driver = {
.probe = adi_gpio_pint_probe,
.remove = adi_gpio_pint_remove,
.driver = {
.name = "adi-gpio-pint",
},
};
static struct platform_driver adi_gpio_driver = {
.probe = adi_gpio_probe,
.remove = adi_gpio_remove,
.driver = {
.name = "adi-gpio",
},
};
static int __init adi_pinctrl_setup(void)
{
int ret;
ret = platform_driver_register(&adi_pinctrl_driver);
if (ret)
return ret;
ret = platform_driver_register(&adi_gpio_pint_driver);
if (ret)
goto pint_error;
ret = platform_driver_register(&adi_gpio_driver);
if (ret)
goto gpio_error;
#ifdef CONFIG_PM
register_syscore_ops(&gpio_pm_syscore_ops);
#endif
return ret;
gpio_error:
platform_driver_unregister(&adi_gpio_pint_driver);
pint_error:
platform_driver_unregister(&adi_pinctrl_driver);
return ret;
}
arch_initcall(adi_pinctrl_setup);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
MODULE_DESCRIPTION("ADI gpio2 pin control driver");
MODULE_LICENSE("GPL");
Reference in a new issue Copy permalink