linux-hardened/kernel/trace/trace.h

777 lines
21 KiB
C
Raw Normal View History

ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
#ifndef _LINUX_KERNEL_TRACE_H
#define _LINUX_KERNEL_TRACE_H
#include <linux/fs.h>
#include <asm/atomic.h>
#include <linux/sched.h>
#include <linux/clocksource.h>
#include <linux/ring_buffer.h>
ftrace: mmiotrace, updates here is a patch that makes mmiotrace work almost well within the tracing framework. The patch applies on top of my previous patch. I have my own output formatting in place now. Summary of changes: - fix the NULL dereference that was due to not calling tracing_reset() - add print_line() callback into struct tracer - implement print_line() for mmiotrace, producing up-to-spec text - add my output header, but that is not really called in the right place - rewrote the main structs in mmiotrace - added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP - made some functions in trace.c non-static - check current==NULL in tracing_generic_entry_update() - fix(?) comparison in trace_seq_printf() Things seem to work fine except a few issues. Markers (text lines injected into mmiotrace log) are missing, I did not feel hacking them in before we have variable length entries. My output header is printed only for 'trace' file, but not 'trace_pipe'. For some reason, despite my quick fix, iter->trace is NULL in print_trace_line() when called from 'trace_pipe' file, which means I don't get proper output formatting. I only tried by loading nouveau.ko, which just detects the card, and that is traced fine. I didn't try further. Map, two reads and unmap. Works perfectly. I am missing the information about overflows, I'd prefer to have a counter for lost events. I didn't try, but I guess currently there is no way of knowning when it overflows? So, not too far from being fully operational, it seems :-) And looking at the diffstat, there also is some 700-900 lines of user space code that just became obsolete. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:57 +02:00
#include <linux/mmiotrace.h>
#include <linux/ftrace.h>
#include <trace/boot.h>
tracing/kmemtrace: normalize the raw tracer event to the unified tracing API Impact: new tracer plugin This patch adapts kmemtrace raw events tracing to the unified tracing API. To enable and use this tracer, just do the following: echo kmemtrace > /debugfs/tracing/current_tracer cat /debugfs/tracing/trace You will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | type_id 1 call_site 18446744071565527833 ptr 18446612134395152256 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 That was to stay backward compatible with the format output produced in inux/tracepoint.h. This is the default ouput, but note that I tried something else. If you change an option: echo kmem_minimalistic > /debugfs/trace_options and then cat /debugfs/trace, you will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | - C 0xffff88007c088780 file_free_rcu + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc + K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode + K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info + K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc + K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp + K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp Yeah I shall confess kmem_minimalistic should be: kmem_alternative. Whatever, I find it more readable but this a personal opinion of course. We can drop it if you want. On the ALLOC/FREE column, + means an allocation and - a free. On the type column, you have K = kmalloc, C = cache, P = page I would like the flags to be GFP_* strings but that would not be easy to not break the column with strings.... About the node...it seems to always be -1. I don't know why but that shouldn't be difficult to find. I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would be more easy to find the tracer headers if they are all in their common directory. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 22:42:23 +01:00
#include <trace/kmemtrace.h>
#include <trace/power.h>
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
enum trace_type {
__TRACE_FIRST_TYPE = 0,
TRACE_FN,
TRACE_CTX,
TRACE_WAKE,
TRACE_STACK,
TRACE_PRINT,
TRACE_BPRINT,
TRACE_SPECIAL,
ftrace: mmiotrace, updates here is a patch that makes mmiotrace work almost well within the tracing framework. The patch applies on top of my previous patch. I have my own output formatting in place now. Summary of changes: - fix the NULL dereference that was due to not calling tracing_reset() - add print_line() callback into struct tracer - implement print_line() for mmiotrace, producing up-to-spec text - add my output header, but that is not really called in the right place - rewrote the main structs in mmiotrace - added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP - made some functions in trace.c non-static - check current==NULL in tracing_generic_entry_update() - fix(?) comparison in trace_seq_printf() Things seem to work fine except a few issues. Markers (text lines injected into mmiotrace log) are missing, I did not feel hacking them in before we have variable length entries. My output header is printed only for 'trace' file, but not 'trace_pipe'. For some reason, despite my quick fix, iter->trace is NULL in print_trace_line() when called from 'trace_pipe' file, which means I don't get proper output formatting. I only tried by loading nouveau.ko, which just detects the card, and that is traced fine. I didn't try further. Map, two reads and unmap. Works perfectly. I am missing the information about overflows, I'd prefer to have a counter for lost events. I didn't try, but I guess currently there is no way of knowning when it overflows? So, not too far from being fully operational, it seems :-) And looking at the diffstat, there also is some 700-900 lines of user space code that just became obsolete. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:57 +02:00
TRACE_MMIO_RW,
TRACE_MMIO_MAP,
TRACE_BRANCH,
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:24:42 +01:00
TRACE_BOOT_CALL,
TRACE_BOOT_RET,
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
TRACE_GRAPH_RET,
TRACE_GRAPH_ENT,
TRACE_USER_STACK,
TRACE_HW_BRANCHES,
tracing/kmemtrace: normalize the raw tracer event to the unified tracing API Impact: new tracer plugin This patch adapts kmemtrace raw events tracing to the unified tracing API. To enable and use this tracer, just do the following: echo kmemtrace > /debugfs/tracing/current_tracer cat /debugfs/tracing/trace You will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | type_id 1 call_site 18446744071565527833 ptr 18446612134395152256 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 That was to stay backward compatible with the format output produced in inux/tracepoint.h. This is the default ouput, but note that I tried something else. If you change an option: echo kmem_minimalistic > /debugfs/trace_options and then cat /debugfs/trace, you will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | - C 0xffff88007c088780 file_free_rcu + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc + K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode + K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info + K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc + K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp + K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp Yeah I shall confess kmem_minimalistic should be: kmem_alternative. Whatever, I find it more readable but this a personal opinion of course. We can drop it if you want. On the ALLOC/FREE column, + means an allocation and - a free. On the type column, you have K = kmalloc, C = cache, P = page I would like the flags to be GFP_* strings but that would not be easy to not break the column with strings.... About the node...it seems to always be -1. I don't know why but that shouldn't be difficult to find. I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would be more easy to find the tracer headers if they are all in their common directory. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 22:42:23 +01:00
TRACE_KMEM_ALLOC,
TRACE_KMEM_FREE,
TRACE_POWER,
blktrace: add ftrace plugin Impact: New way of using the blktrace infrastructure This drops the requirement of userspace utilities to use the blktrace facility. Configuration is done thru sysfs, adding a "trace" directory to the partition directory where blktrace can be enabled for the associated request_queue. The same filters present in the IOCTL interface are present as sysfs device attributes. The /sys/block/sdX/sdXN/trace/enable file allows tracing without any filters. The other files in this directory: pid, act_mask, start_lba and end_lba can be used with the same meaning as with the IOCTL interface. Using the sysfs interface will only setup the request_queue->blk_trace fields, tracing will only take place when the "blk" tracer is selected via the ftrace interface, as in the following example: To see the trace, one can use the /d/tracing/trace file or the /d/tracign/trace_pipe file, with semantics defined in the ftrace documentation in Documentation/ftrace.txt. [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304 kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald] kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald] kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald] kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald] kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1 <idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367] [root@f10-1 ~]# The default line context (prefix) format is the one described in the ftrace documentation, with the blktrace specific bits using its existing format, described in blkparse(8). If one wants to have the classic blktrace formatting, this is possible by using: [root@f10-1 ~]# echo blk_classic > /t/trace_options [root@f10-1 ~]# cat /t/trace 8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304 8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald] 8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald] 8,1 0 3046.491239 305 P NS [kjournald] 8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald] 8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald] 8,1 0 3046.491610 305 U WS [kjournald] 1 8,1 0 3046.511914 0 C RS 6367 + 8 [6367] [root@f10-1 ~]# Using the ftrace standard format allows more flexibility, such as the ability of asking for backtraces via trace_options: [root@f10-1 ~]# echo noblk_classic > /t/trace_options [root@f10-1 ~]# echo stacktrace > /t/trace_options [root@f10-1 ~]# cat /t/trace kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312 kjournald-305 [000] 3318.826782: <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread <= child_rip kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald] kjournald-305 [000] 3318.826837: <= generic_make_request <= submit_bio <= submit_bh <= sync_dirty_buffer <= journal_commit_transaction <= kjournald <= kthread Please read the ftrace documentation to use aditional, standardized tracing filters such as /d/tracing/trace_cpumask, etc. See also /d/tracing/trace_mark to add comments in the trace stream, that is equivalent to the /d/block/sdaN/msg interface. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-23 15:06:27 +01:00
TRACE_BLK,
__TRACE_LAST_TYPE,
};
/*
* The trace entry - the most basic unit of tracing. This is what
* is printed in the end as a single line in the trace output, such as:
*
* bash-15816 [01] 235.197585: idle_cpu <- irq_enter
*/
struct trace_entry {
unsigned char type;
unsigned char flags;
unsigned char preempt_count;
int pid;
int tgid;
};
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
/*
* Function trace entry - function address and parent function addres:
*/
struct ftrace_entry {
struct trace_entry ent;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
unsigned long ip;
unsigned long parent_ip;
};
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
/* Function call entry */
struct ftrace_graph_ent_entry {
struct trace_entry ent;
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
struct ftrace_graph_ent graph_ent;
};
/* Function return entry */
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
struct ftrace_graph_ret_entry {
struct trace_entry ent;
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
struct ftrace_graph_ret ret;
};
extern struct tracer boot_tracer;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
/*
* Context switch trace entry - which task (and prio) we switched from/to:
*/
struct ctx_switch_entry {
struct trace_entry ent;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
unsigned int prev_pid;
unsigned char prev_prio;
unsigned char prev_state;
unsigned int next_pid;
unsigned char next_prio;
unsigned char next_state;
unsigned int next_cpu;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
};
/*
* Special (free-form) trace entry:
*/
struct special_entry {
struct trace_entry ent;
unsigned long arg1;
unsigned long arg2;
unsigned long arg3;
};
/*
* Stack-trace entry:
*/
#define FTRACE_STACK_ENTRIES 8
struct stack_entry {
struct trace_entry ent;
unsigned long caller[FTRACE_STACK_ENTRIES];
};
struct userstack_entry {
struct trace_entry ent;
unsigned long caller[FTRACE_STACK_ENTRIES];
};
/*
* trace_printk entry:
*/
struct bprint_entry {
struct trace_entry ent;
unsigned long ip;
tracing/function-graph-tracer: handle ftrace_printk entries Handle the TRACE_PRINT entries from the function grapg tracer and output them as a C comment just below the function that called it, as if it was a comment inside this function. Example with an ftrace_printk inside might_sleep() function: void __might_sleep(char *file, int line) { static unsigned long prev_jiffy; /* ratelimiting */ ftrace_printk("Hi I'm a comment in might_sleep() :-)"); A chunk of a resulting trace: 0) | _reiserfs_free_block() { 0) | reiserfs_read_bitmap_block() { 0) | __bread() { 0) | __getblk() { 0) | __find_get_block() { 0) 0.698 us | mark_page_accessed(); 0) 2.267 us | } 0) | __might_sleep() { 0) | /* Hi I'm a comment in might_sleep() :-) */ 0) 1.321 us | } 0) 5.872 us | } 0) 7.313 us | } 0) 8.718 us | } And this patch brings two minor fixes: - The newline after a switch-out task has disappeared - The "|" sign just before the cpu number on task-switch has been deleted. 0) 0.616 us | pick_next_task_rt(); 0) 1.457 us | _spin_trylock(); 0) 0.653 us | _spin_unlock(); 0) 0.728 us | _spin_trylock(); 0) 0.631 us | _spin_unlock(); 0) 0.729 us | native_load_sp0(); 0) 0.593 us | native_load_tls(); ------------------------------------------ 0) cat-2834 => migrati-3 ------------------------------------------ 0) | finish_task_switch() { 0) 0.841 us | _spin_unlock_irq(); 0) 0.616 us | post_schedule_rt(); 0) 3.882 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 23:45:11 +01:00
int depth;
tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06 17:21:49 +01:00
const char *fmt;
u32 buf[];
};
struct print_entry {
struct trace_entry ent;
unsigned long ip;
int depth;
char buf[];
};
#define TRACE_OLD_SIZE 88
struct trace_field_cont {
unsigned char type;
/* Temporary till we get rid of this completely */
char buf[TRACE_OLD_SIZE - 1];
};
struct trace_mmiotrace_rw {
struct trace_entry ent;
struct mmiotrace_rw rw;
};
struct trace_mmiotrace_map {
struct trace_entry ent;
struct mmiotrace_map map;
};
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:24:42 +01:00
struct trace_boot_call {
struct trace_entry ent;
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:24:42 +01:00
struct boot_trace_call boot_call;
};
struct trace_boot_ret {
struct trace_entry ent;
struct boot_trace_ret boot_ret;
};
#define TRACE_FUNC_SIZE 30
#define TRACE_FILE_SIZE 20
struct trace_branch {
struct trace_entry ent;
unsigned line;
char func[TRACE_FUNC_SIZE+1];
char file[TRACE_FILE_SIZE+1];
char correct;
};
struct hw_branch_entry {
struct trace_entry ent;
u64 from;
u64 to;
};
struct trace_power {
struct trace_entry ent;
struct power_trace state_data;
};
tracing/kmemtrace: normalize the raw tracer event to the unified tracing API Impact: new tracer plugin This patch adapts kmemtrace raw events tracing to the unified tracing API. To enable and use this tracer, just do the following: echo kmemtrace > /debugfs/tracing/current_tracer cat /debugfs/tracing/trace You will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | type_id 1 call_site 18446744071565527833 ptr 18446612134395152256 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 That was to stay backward compatible with the format output produced in inux/tracepoint.h. This is the default ouput, but note that I tried something else. If you change an option: echo kmem_minimalistic > /debugfs/trace_options and then cat /debugfs/trace, you will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | - C 0xffff88007c088780 file_free_rcu + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc + K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode + K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info + K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc + K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp + K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp Yeah I shall confess kmem_minimalistic should be: kmem_alternative. Whatever, I find it more readable but this a personal opinion of course. We can drop it if you want. On the ALLOC/FREE column, + means an allocation and - a free. On the type column, you have K = kmalloc, C = cache, P = page I would like the flags to be GFP_* strings but that would not be easy to not break the column with strings.... About the node...it seems to always be -1. I don't know why but that shouldn't be difficult to find. I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would be more easy to find the tracer headers if they are all in their common directory. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 22:42:23 +01:00
struct kmemtrace_alloc_entry {
struct trace_entry ent;
enum kmemtrace_type_id type_id;
unsigned long call_site;
const void *ptr;
size_t bytes_req;
size_t bytes_alloc;
gfp_t gfp_flags;
int node;
};
struct kmemtrace_free_entry {
struct trace_entry ent;
enum kmemtrace_type_id type_id;
unsigned long call_site;
const void *ptr;
};
/*
* trace_flag_type is an enumeration that holds different
* states when a trace occurs. These are:
* IRQS_OFF - interrupts were disabled
* IRQS_NOSUPPORT - arch does not support irqs_disabled_flags
* NEED_RESCED - reschedule is requested
* HARDIRQ - inside an interrupt handler
* SOFTIRQ - inside a softirq handler
*/
enum trace_flag_type {
TRACE_FLAG_IRQS_OFF = 0x01,
TRACE_FLAG_IRQS_NOSUPPORT = 0x02,
TRACE_FLAG_NEED_RESCHED = 0x04,
TRACE_FLAG_HARDIRQ = 0x08,
TRACE_FLAG_SOFTIRQ = 0x10,
};
#define TRACE_BUF_SIZE 1024
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
/*
* The CPU trace array - it consists of thousands of trace entries
* plus some other descriptor data: (for example which task started
* the trace, etc.)
*/
struct trace_array_cpu {
atomic_t disabled;
void *buffer_page; /* ring buffer spare */
/* these fields get copied into max-trace: */
unsigned long trace_idx;
unsigned long overrun;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
unsigned long saved_latency;
unsigned long critical_start;
unsigned long critical_end;
unsigned long critical_sequence;
unsigned long nice;
unsigned long policy;
unsigned long rt_priority;
cycle_t preempt_timestamp;
pid_t pid;
uid_t uid;
char comm[TASK_COMM_LEN];
};
struct trace_iterator;
/*
* The trace array - an array of per-CPU trace arrays. This is the
* highest level data structure that individual tracers deal with.
* They have on/off state as well:
*/
struct trace_array {
struct ring_buffer *buffer;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
unsigned long entries;
int cpu;
cycle_t time_start;
struct task_struct *waiter;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
struct trace_array_cpu *data[NR_CPUS];
};
#define FTRACE_CMP_TYPE(var, type) \
__builtin_types_compatible_p(typeof(var), type *)
#undef IF_ASSIGN
#define IF_ASSIGN(var, entry, etype, id) \
if (FTRACE_CMP_TYPE(var, etype)) { \
var = (typeof(var))(entry); \
WARN_ON(id && (entry)->type != id); \
break; \
}
/* Will cause compile errors if type is not found. */
extern void __ftrace_bad_type(void);
/*
* The trace_assign_type is a verifier that the entry type is
* the same as the type being assigned. To add new types simply
* add a line with the following format:
*
* IF_ASSIGN(var, ent, type, id);
*
* Where "type" is the trace type that includes the trace_entry
* as the "ent" item. And "id" is the trace identifier that is
* used in the trace_type enum.
*
* If the type can have more than one id, then use zero.
*/
#define trace_assign_type(var, ent) \
do { \
IF_ASSIGN(var, ent, struct ftrace_entry, TRACE_FN); \
IF_ASSIGN(var, ent, struct ctx_switch_entry, 0); \
IF_ASSIGN(var, ent, struct stack_entry, TRACE_STACK); \
IF_ASSIGN(var, ent, struct userstack_entry, TRACE_USER_STACK);\
IF_ASSIGN(var, ent, struct print_entry, TRACE_PRINT); \
IF_ASSIGN(var, ent, struct bprint_entry, TRACE_BPRINT); \
IF_ASSIGN(var, ent, struct special_entry, 0); \
IF_ASSIGN(var, ent, struct trace_mmiotrace_rw, \
TRACE_MMIO_RW); \
IF_ASSIGN(var, ent, struct trace_mmiotrace_map, \
TRACE_MMIO_MAP); \
tracing/fastboot: Use the ring-buffer timestamp for initcall entries Impact: Split the boot tracer entries in two parts: call and return Now that we are using the sched tracer from the boot tracer, we want to use the same timestamp than the ring-buffer to have consistent time captures between sched events and initcall events. So we get rid of the old time capture by the boot tracer and split the initcall events in two parts: call and return. This way we have the ring buffer timestamp of both. An example trace: [ 27.904149584] calling net_ns_init+0x0/0x1c0 @ 1 [ 27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs [ 27.904575926] calling reboot_init+0x0/0x20 @ 1 [ 27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs [ 27.904800228] calling sysctl_init+0x0/0x30 @ 1 [ 27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs [ 27.905287211] calling ksysfs_init+0x0/0xb0 @ 1 ##### CPU 0 buffer started #### init-1 [000] 27.905395: 1:120:R + [001] 11:115:S ##### CPU 1 buffer started #### <idle>-0 [001] 27.905425: 0:140:R ==> [001] 11:115:R init-1 [000] 27.905426: 1:120:D ==> [000] 0:140:R <idle>-0 [000] 27.905431: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905451: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905456: 4:115:S ==> [000] 0:140:R udevd-11 [001] 27.905458: 11:115:R + [001] 14:115:R <idle>-0 [000] 27.905459: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905462: 0:140:R ==> [000] 4:115:R udevd-11 [001] 27.905462: 11:115:R ==> [001] 14:115:R ksoftirqd/0-4 [000] 27.905467: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905470: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905473: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905476: 4:115:S ==> [000] 0:140:R <idle>-0 [000] 27.905479: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.905482: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.905486: 4:115:S ==> [000] 0:140:R udevd-14 [001] 27.905499: 14:120:X ==> [001] 11:115:R udevd-11 [001] 27.905506: 11:115:R + [000] 1:120:D <idle>-0 [000] 27.905515: 0:140:R ==> [000] 1:120:R udevd-11 [001] 27.905517: 11:115:S ==> [001] 0:140:R [ 27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs [ 27.905705736] calling init_jiffies_clocksource+0x0/0x10 @ 1 [ 27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs [ 27.906769814] calling pm_init+0x0/0x30 @ 1 [ 27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs [ 27.906997803] calling pm_disk_init+0x0/0x20 @ 1 [ 27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs [ 27.907222556] calling swsusp_header_init+0x0/0x30 @ 1 [ 27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs [ 27.907439620] calling stop_machine_init+0x0/0x50 @ 1 init-1 [000] 27.907485: 1:120:R + [000] 2:115:S init-1 [000] 27.907490: 1:120:D ==> [000] 2:115:R kthreadd-2 [000] 27.907507: 2:115:R + [001] 15:115:R <idle>-0 [001] 27.907517: 0:140:R ==> [001] 15:115:R kthreadd-2 [000] 27.907517: 2:115:D ==> [000] 0:140:R <idle>-0 [000] 27.907521: 0:140:R + [000] 4:115:S <idle>-0 [000] 27.907524: 0:140:R ==> [000] 4:115:R udevd-15 [001] 27.907527: 15:115:D + [000] 2:115:D ksoftirqd/0-4 [000] 27.907537: 4:115:S ==> [000] 2:115:R udevd-15 [001] 27.907537: 15:115:D ==> [001] 0:140:R kthreadd-2 [000] 27.907546: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907550: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907584: 1:120:R + [000] 15: 0:D init-1 [000] 27.907589: 1:120:R + [000] 2:115:S init-1 [000] 27.907593: 1:120:D ==> [000] 15: 0:R udevd-15 [000] 27.907601: 15: 0:S ==> [000] 2:115:R ##### CPU 0 buffer started #### kthreadd-2 [000] 27.907616: 2:115:R + [001] 16:115:R ##### CPU 1 buffer started #### <idle>-0 [001] 27.907620: 0:140:R ==> [001] 16:115:R kthreadd-2 [000] 27.907621: 2:115:D ==> [000] 0:140:R udevd-16 [001] 27.907625: 16:115:D + [000] 2:115:D <idle>-0 [000] 27.907628: 0:140:R + [000] 4:115:S udevd-16 [001] 27.907629: 16:115:D ==> [001] 0:140:R <idle>-0 [000] 27.907631: 0:140:R ==> [000] 4:115:R ksoftirqd/0-4 [000] 27.907636: 4:115:S ==> [000] 2:115:R kthreadd-2 [000] 27.907644: 2:115:R + [000] 1:120:D kthreadd-2 [000] 27.907647: 2:115:S ==> [000] 1:120:R init-1 [000] 27.907657: 1:120:R + [001] 16: 0:D <idle>-0 [001] 27.907666: 0:140:R ==> [001] 16: 0:R [ 27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs [ 27.907850704] calling filelock_init+0x0/0x30 @ 1 [ 27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs [ 27.908071327] calling init_script_binfmt+0x0/0x10 @ 1 [ 27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs [ 27.908309461] calling init_elf_binfmt+0x0/0x10 @ 1 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:24:42 +01:00
IF_ASSIGN(var, ent, struct trace_boot_call, TRACE_BOOT_CALL);\
IF_ASSIGN(var, ent, struct trace_boot_ret, TRACE_BOOT_RET);\
IF_ASSIGN(var, ent, struct trace_branch, TRACE_BRANCH); \
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
IF_ASSIGN(var, ent, struct ftrace_graph_ent_entry, \
TRACE_GRAPH_ENT); \
IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry, \
TRACE_GRAPH_RET); \
IF_ASSIGN(var, ent, struct hw_branch_entry, TRACE_HW_BRANCHES);\
IF_ASSIGN(var, ent, struct trace_power, TRACE_POWER); \
tracing/kmemtrace: normalize the raw tracer event to the unified tracing API Impact: new tracer plugin This patch adapts kmemtrace raw events tracing to the unified tracing API. To enable and use this tracer, just do the following: echo kmemtrace > /debugfs/tracing/current_tracer cat /debugfs/tracing/trace You will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | type_id 1 call_site 18446744071565527833 ptr 18446612134395152256 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1 type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1 type_id 1 call_site 18446744071565585534 ptr 18446612134405955584 That was to stay backward compatible with the format output produced in inux/tracepoint.h. This is the default ouput, but note that I tried something else. If you change an option: echo kmem_minimalistic > /debugfs/trace_options and then cat /debugfs/trace, you will have the following output: # tracer: kmemtrace # # # ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER # FREE | | | | | | | | # | - C 0xffff88007c088780 file_free_rcu + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname + K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc + K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode - C 0xffff88007cad6000 putname + K 4096 4096 000000d0 0xffff88007cad6000 -1 getname - C 0xffff88007cad6000 putname + K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode + K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info + K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc + K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp + K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp Yeah I shall confess kmem_minimalistic should be: kmem_alternative. Whatever, I find it more readable but this a personal opinion of course. We can drop it if you want. On the ALLOC/FREE column, + means an allocation and - a free. On the type column, you have K = kmalloc, C = cache, P = page I would like the flags to be GFP_* strings but that would not be easy to not break the column with strings.... About the node...it seems to always be -1. I don't know why but that shouldn't be difficult to find. I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would be more easy to find the tracer headers if they are all in their common directory. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 22:42:23 +01:00
IF_ASSIGN(var, ent, struct kmemtrace_alloc_entry, \
TRACE_KMEM_ALLOC); \
IF_ASSIGN(var, ent, struct kmemtrace_free_entry, \
TRACE_KMEM_FREE); \
__ftrace_bad_type(); \
} while (0)
/* Return values for print_line callback */
enum print_line_t {
TRACE_TYPE_PARTIAL_LINE = 0, /* Retry after flushing the seq */
TRACE_TYPE_HANDLED = 1,
TRACE_TYPE_UNHANDLED = 2, /* Relay to other output functions */
TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */
};
/*
* An option specific to a tracer. This is a boolean value.
* The bit is the bit index that sets its value on the
* flags value in struct tracer_flags.
*/
struct tracer_opt {
const char *name; /* Will appear on the trace_options file */
u32 bit; /* Mask assigned in val field in tracer_flags */
};
/*
* The set of specific options for a tracer. Your tracer
* have to set the initial value of the flags val.
*/
struct tracer_flags {
u32 val;
struct tracer_opt *opts;
};
/* Makes more easy to define a tracer opt */
#define TRACER_OPT(s, b) .name = #s, .bit = b
/**
* struct tracer - a specific tracer and its callbacks to interact with debugfs
* @name: the name chosen to select it on the available_tracers file
* @init: called when one switches to this tracer (echo name > current_tracer)
* @reset: called when one switches to another tracer
* @start: called when tracing is unpaused (echo 1 > tracing_enabled)
* @stop: called when tracing is paused (echo 0 > tracing_enabled)
* @open: called when the trace file is opened
* @pipe_open: called when the trace_pipe file is opened
* @wait_pipe: override how the user waits for traces on trace_pipe
* @close: called when the trace file is released
* @read: override the default read callback on trace_pipe
* @splice_read: override the default splice_read callback on trace_pipe
* @selftest: selftest to run on boot (see trace_selftest.c)
* @print_headers: override the first lines that describe your columns
* @print_line: callback that prints a trace
* @set_flag: signals one of your private flags changed (trace_options file)
* @flags: your private flags
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
*/
struct tracer {
const char *name;
int (*init)(struct trace_array *tr);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void (*reset)(struct trace_array *tr);
ftrace: restructure tracing start/stop infrastructure Impact: change where tracing is started up and stopped Currently, when a new tracer is selected via echo'ing a tracer name into the current_tracer file, the startup is only done if tracing_enabled is set to one. If tracing_enabled is changed to zero (by echo'ing 0 into the tracing_enabled file) a full shutdown is performed. The full startup and shutdown of a tracer can be expensive and the user can lose out traces when echo'ing in 0 to the tracing_enabled file, because the process takes too long. There can also be places that the user would like to start and stop the tracer several times and doing the full startup and shutdown of a tracer might be too expensive. This patch performs the full startup and shutdown when a tracer is selected. It also adds a way to do a quick start or stop of a tracer. The quick version is just a flag that prevents the tracing from taking place, but the overhead of the code is still there. For example, the startup of a tracer may enable tracepoints, or enable the function tracer. The stop and start will just set a flag to have the tracer ignore the calls when the tracepoint or function trace is called. The overhead of the tracer may still be present when the tracer is stopped, but no tracing will occur. Setting the tracer to the 'nop' tracer (or any other tracer) will perform the shutdown of the tracer which will disable the tracepoint or disable the function tracer. The tracing_enabled file will simply start or stop tracing. This change is all internal. The end result for the user should be the same as before. If tracing_enabled is not set, no trace will happen. If tracing_enabled is set, then the trace will happen. The tracing_enabled variable is static between tracers. Enabling tracing_enabled and going to another tracer will keep tracing_enabled enabled. Same is true with disabling tracing_enabled. This patch will now provide a fast start/stop method to the users for enabling or disabling tracing. Note: There were two methods to the struct tracer that were never used: The methods start and stop. These were to be used as a hook to the reading of the trace output, but ended up not being necessary. These two methods are now used to enable the start and stop of each tracer, in case the tracer needs to do more than just not write into the buffer. For example, the irqsoff tracer must stop recording max latencies when tracing is stopped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 22:05:44 +01:00
void (*start)(struct trace_array *tr);
void (*stop)(struct trace_array *tr);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void (*open)(struct trace_iterator *iter);
void (*pipe_open)(struct trace_iterator *iter);
void (*wait_pipe)(struct trace_iterator *iter);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void (*close)(struct trace_iterator *iter);
ssize_t (*read)(struct trace_iterator *iter,
struct file *filp, char __user *ubuf,
size_t cnt, loff_t *ppos);
ssize_t (*splice_read)(struct trace_iterator *iter,
struct file *filp,
loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len,
unsigned int flags);
#ifdef CONFIG_FTRACE_STARTUP_TEST
int (*selftest)(struct tracer *trace,
struct trace_array *tr);
#endif
void (*print_header)(struct seq_file *m);
enum print_line_t (*print_line)(struct trace_iterator *iter);
/* If you handled the flag setting, return 0 */
int (*set_flag)(u32 old_flags, u32 bit, int set);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
struct tracer *next;
int print_max;
struct tracer_flags *flags;
struct tracer_stat *stats;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
};
struct trace_seq {
unsigned char buffer[PAGE_SIZE];
unsigned int len;
unsigned int readpos;
};
static inline void
trace_seq_init(struct trace_seq *s)
{
s->len = 0;
s->readpos = 0;
}
tracing/core: introduce per cpu tracing files Impact: split up tracing output per cpu Currently, on the tracing debugfs directory, three files are available to the user to let him extracting the trace output: - trace is an iterator through the ring-buffer. It's a reader but not a consumer It doesn't block when no more traces are available. - trace pretty similar to the former, except that it adds more informations such as prempt count, irq flag, ... - trace_pipe is a reader and a consumer, it will also block waiting for traces if necessary (heh, yes it's a pipe). The traces coming from different cpus are curretly mixed up inside these files. Sometimes it messes up the informations, sometimes it's useful, depending on what does the tracer capture. The tracing_cpumask file is useful to filter the output and select only the traces captured a custom defined set of cpus. But still it is not enough powerful to extract at the same time one trace buffer per cpu. So this patch creates a new directory: /debug/tracing/per_cpu/. Inside this directory, you will now find one trace_pipe file and one trace file per cpu. Which means if you have two cpus, you will have: trace0 trace1 trace_pipe0 trace_pipe1 And of course, reading these files will have the same effect than with the usual tracing files, except that you will only see the traces from the given cpu. The original all-in-one cpu trace file are still available on their original place. Until now, only one consumer was allowed on trace_pipe to avoid racy consuming on the ring-buffer. Now the approach changed a bit, you can have only one consumer per cpu. Which means you are allowed to read concurrently trace_pipe0 and trace_pipe1 But you can't have two readers on trace_pipe0 or trace_pipe1. Following the same logic, if there is one reader on the common trace_pipe, you can not have at the same time another reader on trace_pipe0 or in trace_pipe1. Because in trace_pipe is already a consumer in all cpu buffers in essence. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 03:22:28 +01:00
#define TRACE_PIPE_ALL_CPU -1
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
/*
* Trace iterator - used by printout routines who present trace
* results to users and which routines might sleep, etc:
*/
struct trace_iterator {
struct trace_array *tr;
struct tracer *trace;
void *private;
tracing/core: introduce per cpu tracing files Impact: split up tracing output per cpu Currently, on the tracing debugfs directory, three files are available to the user to let him extracting the trace output: - trace is an iterator through the ring-buffer. It's a reader but not a consumer It doesn't block when no more traces are available. - trace pretty similar to the former, except that it adds more informations such as prempt count, irq flag, ... - trace_pipe is a reader and a consumer, it will also block waiting for traces if necessary (heh, yes it's a pipe). The traces coming from different cpus are curretly mixed up inside these files. Sometimes it messes up the informations, sometimes it's useful, depending on what does the tracer capture. The tracing_cpumask file is useful to filter the output and select only the traces captured a custom defined set of cpus. But still it is not enough powerful to extract at the same time one trace buffer per cpu. So this patch creates a new directory: /debug/tracing/per_cpu/. Inside this directory, you will now find one trace_pipe file and one trace file per cpu. Which means if you have two cpus, you will have: trace0 trace1 trace_pipe0 trace_pipe1 And of course, reading these files will have the same effect than with the usual tracing files, except that you will only see the traces from the given cpu. The original all-in-one cpu trace file are still available on their original place. Until now, only one consumer was allowed on trace_pipe to avoid racy consuming on the ring-buffer. Now the approach changed a bit, you can have only one consumer per cpu. Which means you are allowed to read concurrently trace_pipe0 and trace_pipe1 But you can't have two readers on trace_pipe0 or trace_pipe1. Following the same logic, if there is one reader on the common trace_pipe, you can not have at the same time another reader on trace_pipe0 or in trace_pipe1. Because in trace_pipe is already a consumer in all cpu buffers in essence. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 03:22:28 +01:00
int cpu_file;
tracing/core: make the read callbacks reentrants Now that several per-cpu files can be read or spliced at the same, we want the read/splice callbacks for tracing files to be reentrants. Until now, a single global mutex (trace_types_lock) serialized the access to tracing_read_pipe(), tracing_splice_read_pipe(), and the seq helpers. Ie: it means that if a user tries to read trace_pipe0 and trace_pipe1 at the same time, the access to the function tracing_read_pipe() is contended and one reader must wait for the other to finish its read call. The trace_type_lock mutex is mostly here to serialize the access to the global current tracer (current_trace), which can be changed concurrently. Although the iter struct keeps a private pointer to this tracer, its callbacks can be changed by another function. The method used here is to not keep anymore private reference to the tracer inside the iterator but to make a copy of it inside the iterator. Then it checks on subsequents read calls if the tracer has changed. This is not costly because the current tracer is not expected to be changed often, so we use a branch prediction for that. Moreover, we add a private mutex to the iterator (there is one iterator per file descriptor) to serialize the accesses in case of multiple consumers per file descriptor (which would be a silly idea from the user). Note that this is not to protect the ring buffer, since the ring buffer already serializes the readers accesses. This is to prevent from traces weirdness in case of concurrent consumers. But these mutexes can be dropped anyway, that would not result in any crash. Just tell me what you think about it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25 06:13:16 +01:00
struct mutex mutex;
struct ring_buffer_iter *buffer_iter[NR_CPUS];
/* The below is zeroed out in pipe_read */
struct trace_seq seq;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
struct trace_entry *ent;
int cpu;
u64 ts;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
unsigned long iter_flags;
loff_t pos;
long idx;
cpumask_var_t started;
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
};
int tracer_init(struct tracer *t, struct trace_array *tr);
ftrace: restructure tracing start/stop infrastructure Impact: change where tracing is started up and stopped Currently, when a new tracer is selected via echo'ing a tracer name into the current_tracer file, the startup is only done if tracing_enabled is set to one. If tracing_enabled is changed to zero (by echo'ing 0 into the tracing_enabled file) a full shutdown is performed. The full startup and shutdown of a tracer can be expensive and the user can lose out traces when echo'ing in 0 to the tracing_enabled file, because the process takes too long. There can also be places that the user would like to start and stop the tracer several times and doing the full startup and shutdown of a tracer might be too expensive. This patch performs the full startup and shutdown when a tracer is selected. It also adds a way to do a quick start or stop of a tracer. The quick version is just a flag that prevents the tracing from taking place, but the overhead of the code is still there. For example, the startup of a tracer may enable tracepoints, or enable the function tracer. The stop and start will just set a flag to have the tracer ignore the calls when the tracepoint or function trace is called. The overhead of the tracer may still be present when the tracer is stopped, but no tracing will occur. Setting the tracer to the 'nop' tracer (or any other tracer) will perform the shutdown of the tracer which will disable the tracepoint or disable the function tracer. The tracing_enabled file will simply start or stop tracing. This change is all internal. The end result for the user should be the same as before. If tracing_enabled is not set, no trace will happen. If tracing_enabled is set, then the trace will happen. The tracing_enabled variable is static between tracers. Enabling tracing_enabled and going to another tracer will keep tracing_enabled enabled. Same is true with disabling tracing_enabled. This patch will now provide a fast start/stop method to the users for enabling or disabling tracing. Note: There were two methods to the struct tracer that were never used: The methods start and stop. These were to be used as a hook to the reading of the trace output, but ended up not being necessary. These two methods are now used to enable the start and stop of each tracer, in case the tracer needs to do more than just not write into the buffer. For example, the irqsoff tracer must stop recording max latencies when tracing is stopped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 22:05:44 +01:00
int tracing_is_enabled(void);
void trace_wake_up(void);
void tracing_reset(struct trace_array *tr, int cpu);
void tracing_reset_online_cpus(struct trace_array *tr);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
int tracing_open_generic(struct inode *inode, struct file *filp);
struct dentry *tracing_init_dentry(void);
void init_tracer_sysprof_debugfs(struct dentry *d_tracer);
struct ring_buffer_event;
struct ring_buffer_event *trace_buffer_lock_reserve(struct trace_array *tr,
unsigned char type,
unsigned long len,
unsigned long flags,
int pc);
void trace_buffer_unlock_commit(struct trace_array *tr,
struct ring_buffer_event *event,
unsigned long flags, int pc);
struct ring_buffer_event *
trace_current_buffer_lock_reserve(unsigned char type, unsigned long len,
unsigned long flags, int pc);
void trace_current_buffer_unlock_commit(struct ring_buffer_event *event,
unsigned long flags, int pc);
struct trace_entry *tracing_get_trace_entry(struct trace_array *tr,
struct trace_array_cpu *data);
trace: better manage the context info for events Impact: make trace_event more convenient for tracers All tracers (for the moment) that use the struct trace_event want to have the context info printed before their own output: the pid/cmdline, cpu, and timestamp. But some other tracers that want to implement their trace_event callbacks will not necessary need these information or they may want to format them as they want. This patch adds a new default-enabled trace option: TRACE_ITER_CONTEXT_INFO When disabled through: echo nocontext-info > /debugfs/tracing/trace_options The pid, cpu and timestamps headers will not be printed. IE with the sched_switch tracer with context-info (default): bash-2935 [001] 100.356561: 2935:120:S ==> [001] 0:140:R <idle> <idle>-0 [000] 100.412804: 0:140:R + [000] 11:115:S events/0 <idle>-0 [000] 100.412816: 0:140:R ==> [000] 11:115:R events/0 events/0-11 [000] 100.412829: 11:115:S ==> [000] 0:140:R <idle> Without context-info: 2935:120:S ==> [001] 0:140:R <idle> 0:140:R + [000] 11:115:S events/0 0:140:R ==> [000] 11:115:R events/0 11:115:S ==> [000] 0:140:R <idle> A tracer can disable it at runtime by clearing the bit TRACE_ITER_CONTEXT_INFO in trace_flags. The print routines were renamed to trace_print_context and trace_print_lat_context, so that they can be used by tracers if they want to use them for one of the trace_event callbacks. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-02 23:29:21 +01:00
struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
int *ent_cpu, u64 *ent_ts);
void tracing_generic_entry_update(struct trace_entry *entry,
unsigned long flags,
int pc);
void default_wait_pipe(struct trace_iterator *iter);
void poll_wait_pipe(struct trace_iterator *iter);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void ftrace(struct trace_array *tr,
struct trace_array_cpu *data,
unsigned long ip,
unsigned long parent_ip,
unsigned long flags, int pc);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void tracing_sched_switch_trace(struct trace_array *tr,
struct task_struct *prev,
struct task_struct *next,
unsigned long flags, int pc);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
void tracing_record_cmdline(struct task_struct *tsk);
void tracing_sched_wakeup_trace(struct trace_array *tr,
struct task_struct *wakee,
struct task_struct *cur,
unsigned long flags, int pc);
void trace_special(struct trace_array *tr,
struct trace_array_cpu *data,
unsigned long arg1,
unsigned long arg2,
unsigned long arg3, int pc);
void trace_function(struct trace_array *tr,
unsigned long ip,
unsigned long parent_ip,
unsigned long flags, int pc);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
tracing/function-return-tracer: set a more human readable output Impact: feature This patch sets a C-like output for the function graph tracing. For this aim, we now call two handler for each function: one on the entry and one other on return. This way we can draw a well-ordered call stack. The pid of the previous trace is loosely stored to be compared against the one of the current trace to see if there were a context switch. Without this little feature, the call tree would seem broken at some locations. We could use the sched_tracer to capture these sched_events but this way of processing is much more simpler. 2 spaces have been chosen for indentation to fit the screen while deep calls. The time of execution in nanosecs is printed just after closed braces, it seems more easy this way to find the corresponding function. If the time was printed as a first column, it would be not so easy to find the corresponding function if it is called on a deep depth. I plan to output the return value but on 32 bits CPU, the return value can be 32 or 64, and its difficult to guess on which case we are. I don't know what would be the better solution on X86-32: only print eax (low-part) or even edx (high-part). Actually it's thee same problem when a function return a 8 bits value, the high part of eax could contain junk values... Here is an example of trace: sys_read() { fget_light() { } 526 vfs_read() { rw_verify_area() { security_file_permission() { cap_file_permission() { } 519 } 1564 } 2640 do_sync_read() { pipe_read() { __might_sleep() { } 511 pipe_wait() { prepare_to_wait() { } 760 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { update_min_vruntime() { } 504 } 1587 clear_buddies() { } 512 add_cfs_task_weight() { } 519 update_min_vruntime() { } 511 } 5602 dequeue_entity() { update_curr() { update_min_vruntime() { } 496 } 1631 clear_buddies() { } 496 update_min_vruntime() { } 527 } 4580 hrtick_update() { hrtick_start_fair() { } 488 } 1489 } 13700 } 14949 } 16016 msecs_to_jiffies() { } 496 put_prev_task_fair() { } 504 pick_next_task_fair() { } 489 pick_next_task_rt() { } 496 pick_next_task_fair() { } 489 pick_next_task_idle() { } 489 ------------8<---------- thread 4 ------------8<---------- finish_task_switch() { } 1203 do_softirq() { __do_softirq() { __local_bh_disable() { } 669 rcu_process_callbacks() { __rcu_process_callbacks() { cpu_quiet() { rcu_start_batch() { } 503 } 1647 } 3128 __rcu_process_callbacks() { } 542 } 5362 _local_bh_enable() { } 587 } 8880 } 9986 kthread_should_stop() { } 669 deactivate_task() { dequeue_task() { dequeue_task_fair() { dequeue_entity() { update_curr() { calc_delta_mine() { } 511 update_min_vruntime() { } 511 } 2813 Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 00:57:25 +01:00
void trace_graph_return(struct ftrace_graph_ret *trace);
int trace_graph_entry(struct ftrace_graph_ent *trace);
void tracing_start_cmdline_record(void);
void tracing_stop_cmdline_record(void);
void tracing_sched_switch_assign_trace(struct trace_array *tr);
void tracing_stop_sched_switch_record(void);
void tracing_start_sched_switch_record(void);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
int register_tracer(struct tracer *type);
void unregister_tracer(struct tracer *type);
extern unsigned long nsecs_to_usecs(unsigned long nsecs);
extern unsigned long tracing_max_latency;
extern unsigned long tracing_thresh;
void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu);
void update_max_tr_single(struct trace_array *tr,
struct task_struct *tsk, int cpu);
void __trace_stack(struct trace_array *tr,
unsigned long flags,
int skip, int pc);
extern cycle_t ftrace_now(int cpu);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
#ifdef CONFIG_CONTEXT_SWITCH_TRACER
typedef void
(*tracer_switch_func_t)(void *private,
void *__rq,
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
struct task_struct *prev,
struct task_struct *next);
struct tracer_switch_ops {
tracer_switch_func_t func;
void *private;
struct tracer_switch_ops *next;
};
#endif /* CONFIG_CONTEXT_SWITCH_TRACER */
extern char *trace_find_cmdline(int pid);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
#ifdef CONFIG_DYNAMIC_FTRACE
extern unsigned long ftrace_update_tot_cnt;
#define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func
extern int DYN_FTRACE_TEST_NAME(void);
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
#endif
#ifdef CONFIG_FTRACE_STARTUP_TEST
extern int trace_selftest_startup_function(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_function_graph(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_irqsoff(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_preemptoff(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_preemptirqsoff(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_wakeup(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_nop(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_sched_switch(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_sysprof(struct tracer *trace,
struct trace_array *tr);
extern int trace_selftest_startup_branch(struct tracer *trace,
struct trace_array *tr);
#endif /* CONFIG_FTRACE_STARTUP_TEST */
extern void *head_page(struct trace_array_cpu *data);
extern long ns2usecs(cycle_t nsec);
tracing/function-graph-tracer: handle ftrace_printk entries Handle the TRACE_PRINT entries from the function grapg tracer and output them as a C comment just below the function that called it, as if it was a comment inside this function. Example with an ftrace_printk inside might_sleep() function: void __might_sleep(char *file, int line) { static unsigned long prev_jiffy; /* ratelimiting */ ftrace_printk("Hi I'm a comment in might_sleep() :-)"); A chunk of a resulting trace: 0) | _reiserfs_free_block() { 0) | reiserfs_read_bitmap_block() { 0) | __bread() { 0) | __getblk() { 0) | __find_get_block() { 0) 0.698 us | mark_page_accessed(); 0) 2.267 us | } 0) | __might_sleep() { 0) | /* Hi I'm a comment in might_sleep() :-) */ 0) 1.321 us | } 0) 5.872 us | } 0) 7.313 us | } 0) 8.718 us | } And this patch brings two minor fixes: - The newline after a switch-out task has disappeared - The "|" sign just before the cpu number on task-switch has been deleted. 0) 0.616 us | pick_next_task_rt(); 0) 1.457 us | _spin_trylock(); 0) 0.653 us | _spin_unlock(); 0) 0.728 us | _spin_trylock(); 0) 0.631 us | _spin_unlock(); 0) 0.729 us | native_load_sp0(); 0) 0.593 us | native_load_tls(); ------------------------------------------ 0) cat-2834 => migrati-3 ------------------------------------------ 0) | finish_task_switch() { 0) 0.841 us | _spin_unlock_irq(); 0) 0.616 us | post_schedule_rt(); 0) 3.882 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 23:45:11 +01:00
extern int
trace_vbprintk(unsigned long ip, int depth, const char *fmt, va_list args);
extern int
tracing/function-graph-tracer: handle ftrace_printk entries Handle the TRACE_PRINT entries from the function grapg tracer and output them as a C comment just below the function that called it, as if it was a comment inside this function. Example with an ftrace_printk inside might_sleep() function: void __might_sleep(char *file, int line) { static unsigned long prev_jiffy; /* ratelimiting */ ftrace_printk("Hi I'm a comment in might_sleep() :-)"); A chunk of a resulting trace: 0) | _reiserfs_free_block() { 0) | reiserfs_read_bitmap_block() { 0) | __bread() { 0) | __getblk() { 0) | __find_get_block() { 0) 0.698 us | mark_page_accessed(); 0) 2.267 us | } 0) | __might_sleep() { 0) | /* Hi I'm a comment in might_sleep() :-) */ 0) 1.321 us | } 0) 5.872 us | } 0) 7.313 us | } 0) 8.718 us | } And this patch brings two minor fixes: - The newline after a switch-out task has disappeared - The "|" sign just before the cpu number on task-switch has been deleted. 0) 0.616 us | pick_next_task_rt(); 0) 1.457 us | _spin_trylock(); 0) 0.653 us | _spin_unlock(); 0) 0.728 us | _spin_trylock(); 0) 0.631 us | _spin_unlock(); 0) 0.729 us | native_load_sp0(); 0) 0.593 us | native_load_tls(); ------------------------------------------ 0) cat-2834 => migrati-3 ------------------------------------------ 0) | finish_task_switch() { 0) 0.841 us | _spin_unlock_irq(); 0) 0.616 us | post_schedule_rt(); 0) 3.882 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 23:45:11 +01:00
trace_vprintk(unsigned long ip, int depth, const char *fmt, va_list args);
extern unsigned long trace_flags;
/* Standard output formatting function used for function return traces */
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
extern enum print_line_t print_graph_function(struct trace_iterator *iter);
ftrace: graph of a single function This patch adds the file: /debugfs/tracing/set_graph_function which can be used along with the function graph tracer. When this file is empty, the function graph tracer will act as usual. When the file has a function in it, the function graph tracer will only trace that function. For example: # echo blk_unplug > /debugfs/tracing/set_graph_function # cat /debugfs/tracing/trace [...] ------------------------------------------ | 2) make-19003 => kjournald-2219 ------------------------------------------ 2) | blk_unplug() { 2) | dm_unplug_all() { 2) | dm_get_table() { 2) 1.381 us | _read_lock(); 2) 0.911 us | dm_table_get(); 2) 1. 76 us | _read_unlock(); 2) + 12.912 us | } 2) | dm_table_unplug_all() { 2) | blk_unplug() { 2) 0.778 us | generic_unplug_device(); 2) 2.409 us | } 2) 5.992 us | } 2) 0.813 us | dm_table_put(); 2) + 29. 90 us | } 2) + 34.532 us | } You can add up to 32 functions into this file. Currently we limit it to 32, but this may change with later improvements. To add another function, use the append '>>': # echo sys_read >> /debugfs/tracing/set_graph_function # cat /debugfs/tracing/set_graph_function blk_unplug sys_read Using the '>' will clear out the function and write anew: # echo sys_write > /debug/tracing/set_graph_function # cat /debug/tracing/set_graph_function sys_write Note, if you have function graph running while doing this, the small time between clearing it and updating it will cause the graph to record all functions. This should not be an issue because after it sets the filter, only those functions will be recorded from then on. If you need to only record a particular function then set this file first before starting the function graph tracer. In the future this side effect may be corrected. The set_graph_function file is similar to the set_ftrace_filter but it does not take wild cards nor does it allow for more than one function to be set with a single write. There is no technical reason why this is the case, I just do not have the time yet to implement that. Note, dynamic ftrace must be enabled for this to appear because it uses the dynamic ftrace records to match the name to the mcount call sites. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 21:36:57 +01:00
#ifdef CONFIG_DYNAMIC_FTRACE
/* TODO: make this variable */
#define FTRACE_GRAPH_MAX_FUNCS 32
extern int ftrace_graph_count;
extern unsigned long ftrace_graph_funcs[FTRACE_GRAPH_MAX_FUNCS];
static inline int ftrace_graph_addr(unsigned long addr)
{
int i;
if (!ftrace_graph_count || test_tsk_trace_graph(current))
return 1;
for (i = 0; i < ftrace_graph_count; i++) {
if (addr == ftrace_graph_funcs[i])
return 1;
}
return 0;
}
#else
ftrace: graph of a single function This patch adds the file: /debugfs/tracing/set_graph_function which can be used along with the function graph tracer. When this file is empty, the function graph tracer will act as usual. When the file has a function in it, the function graph tracer will only trace that function. For example: # echo blk_unplug > /debugfs/tracing/set_graph_function # cat /debugfs/tracing/trace [...] ------------------------------------------ | 2) make-19003 => kjournald-2219 ------------------------------------------ 2) | blk_unplug() { 2) | dm_unplug_all() { 2) | dm_get_table() { 2) 1.381 us | _read_lock(); 2) 0.911 us | dm_table_get(); 2) 1. 76 us | _read_unlock(); 2) + 12.912 us | } 2) | dm_table_unplug_all() { 2) | blk_unplug() { 2) 0.778 us | generic_unplug_device(); 2) 2.409 us | } 2) 5.992 us | } 2) 0.813 us | dm_table_put(); 2) + 29. 90 us | } 2) + 34.532 us | } You can add up to 32 functions into this file. Currently we limit it to 32, but this may change with later improvements. To add another function, use the append '>>': # echo sys_read >> /debugfs/tracing/set_graph_function # cat /debugfs/tracing/set_graph_function blk_unplug sys_read Using the '>' will clear out the function and write anew: # echo sys_write > /debug/tracing/set_graph_function # cat /debug/tracing/set_graph_function sys_write Note, if you have function graph running while doing this, the small time between clearing it and updating it will cause the graph to record all functions. This should not be an issue because after it sets the filter, only those functions will be recorded from then on. If you need to only record a particular function then set this file first before starting the function graph tracer. In the future this side effect may be corrected. The set_graph_function file is similar to the set_ftrace_filter but it does not take wild cards nor does it allow for more than one function to be set with a single write. There is no technical reason why this is the case, I just do not have the time yet to implement that. Note, dynamic ftrace must be enabled for this to appear because it uses the dynamic ftrace records to match the name to the mcount call sites. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 21:36:57 +01:00
static inline int ftrace_trace_addr(unsigned long addr)
{
return 1;
}
static inline int ftrace_graph_addr(unsigned long addr)
{
return 1;
ftrace: graph of a single function This patch adds the file: /debugfs/tracing/set_graph_function which can be used along with the function graph tracer. When this file is empty, the function graph tracer will act as usual. When the file has a function in it, the function graph tracer will only trace that function. For example: # echo blk_unplug > /debugfs/tracing/set_graph_function # cat /debugfs/tracing/trace [...] ------------------------------------------ | 2) make-19003 => kjournald-2219 ------------------------------------------ 2) | blk_unplug() { 2) | dm_unplug_all() { 2) | dm_get_table() { 2) 1.381 us | _read_lock(); 2) 0.911 us | dm_table_get(); 2) 1. 76 us | _read_unlock(); 2) + 12.912 us | } 2) | dm_table_unplug_all() { 2) | blk_unplug() { 2) 0.778 us | generic_unplug_device(); 2) 2.409 us | } 2) 5.992 us | } 2) 0.813 us | dm_table_put(); 2) + 29. 90 us | } 2) + 34.532 us | } You can add up to 32 functions into this file. Currently we limit it to 32, but this may change with later improvements. To add another function, use the append '>>': # echo sys_read >> /debugfs/tracing/set_graph_function # cat /debugfs/tracing/set_graph_function blk_unplug sys_read Using the '>' will clear out the function and write anew: # echo sys_write > /debug/tracing/set_graph_function # cat /debug/tracing/set_graph_function sys_write Note, if you have function graph running while doing this, the small time between clearing it and updating it will cause the graph to record all functions. This should not be an issue because after it sets the filter, only those functions will be recorded from then on. If you need to only record a particular function then set this file first before starting the function graph tracer. In the future this side effect may be corrected. The set_graph_function file is similar to the set_ftrace_filter but it does not take wild cards nor does it allow for more than one function to be set with a single write. There is no technical reason why this is the case, I just do not have the time yet to implement that. Note, dynamic ftrace must be enabled for this to appear because it uses the dynamic ftrace records to match the name to the mcount call sites. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 21:36:57 +01:00
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#else /* CONFIG_FUNCTION_GRAPH_TRACER */
static inline enum print_line_t
print_graph_function(struct trace_iterator *iter)
{
return TRACE_TYPE_UNHANDLED;
}
ftrace: graph of a single function This patch adds the file: /debugfs/tracing/set_graph_function which can be used along with the function graph tracer. When this file is empty, the function graph tracer will act as usual. When the file has a function in it, the function graph tracer will only trace that function. For example: # echo blk_unplug > /debugfs/tracing/set_graph_function # cat /debugfs/tracing/trace [...] ------------------------------------------ | 2) make-19003 => kjournald-2219 ------------------------------------------ 2) | blk_unplug() { 2) | dm_unplug_all() { 2) | dm_get_table() { 2) 1.381 us | _read_lock(); 2) 0.911 us | dm_table_get(); 2) 1. 76 us | _read_unlock(); 2) + 12.912 us | } 2) | dm_table_unplug_all() { 2) | blk_unplug() { 2) 0.778 us | generic_unplug_device(); 2) 2.409 us | } 2) 5.992 us | } 2) 0.813 us | dm_table_put(); 2) + 29. 90 us | } 2) + 34.532 us | } You can add up to 32 functions into this file. Currently we limit it to 32, but this may change with later improvements. To add another function, use the append '>>': # echo sys_read >> /debugfs/tracing/set_graph_function # cat /debugfs/tracing/set_graph_function blk_unplug sys_read Using the '>' will clear out the function and write anew: # echo sys_write > /debug/tracing/set_graph_function # cat /debug/tracing/set_graph_function sys_write Note, if you have function graph running while doing this, the small time between clearing it and updating it will cause the graph to record all functions. This should not be an issue because after it sets the filter, only those functions will be recorded from then on. If you need to only record a particular function then set this file first before starting the function graph tracer. In the future this side effect may be corrected. The set_graph_function file is similar to the set_ftrace_filter but it does not take wild cards nor does it allow for more than one function to be set with a single write. There is no technical reason why this is the case, I just do not have the time yet to implement that. Note, dynamic ftrace must be enabled for this to appear because it uses the dynamic ftrace records to match the name to the mcount call sites. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 21:36:57 +01:00
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
extern struct pid *ftrace_pid_trace;
static inline int ftrace_trace_task(struct task_struct *task)
{
if (!ftrace_pid_trace)
return 1;
return test_tsk_trace_trace(task);
}
/*
* trace_iterator_flags is an enumeration that defines bit
* positions into trace_flags that controls the output.
*
* NOTE: These bits must match the trace_options array in
* trace.c.
*/
enum trace_iterator_flags {
TRACE_ITER_PRINT_PARENT = 0x01,
TRACE_ITER_SYM_OFFSET = 0x02,
TRACE_ITER_SYM_ADDR = 0x04,
TRACE_ITER_VERBOSE = 0x08,
TRACE_ITER_RAW = 0x10,
TRACE_ITER_HEX = 0x20,
TRACE_ITER_BIN = 0x40,
TRACE_ITER_BLOCK = 0x80,
TRACE_ITER_STACKTRACE = 0x100,
TRACE_ITER_SCHED_TREE = 0x200,
TRACE_ITER_PRINTK = 0x400,
ftrace: function tracer with irqs disabled Impact: disable interrupts during trace entry creation (as opposed to preempt) To help with performance, I set the ftracer to not disable interrupts, and only to disable preemption. If an interrupt occurred, it would not be traced, because the function tracer protects itself from recursion. This may be faster, but the trace output might miss some traces. This patch makes the fuction trace disable interrupts, but it also adds a runtime feature to disable preemption instead. It does this by having two different tracer functions. When the function tracer is enabled, it will check to see which version is requested (irqs disabled or preemption disabled). Then it will use the corresponding function as the tracer. Irq disabling is the default behaviour, but if the user wants better performance, with the chance of missing traces, then they can choose the preempt disabled version. Running hackbench 3 times with the irqs disabled and 3 times with the preempt disabled function tracer yielded: tracing type times entries recorded ------------ -------- ---------------- irq disabled 43.393 166433066 43.282 166172618 43.298 166256704 preempt disabled 38.969 159871710 38.943 159972935 39.325 161056510 Average: irqs disabled: 43.324 166287462 preempt disabled: 39.079 160300385 preempt is 10.8 percent faster than irqs disabled. I wrote a patch to count function trace recursion and reran hackbench. With irq disabled: 1,150 times the function tracer did not trace due to recursion. with preempt disabled: 5,117,718 times. The thousand times with irq disabled could be due to NMIs, or simply a case where it called a function that was not protected by notrace. But we also see that a large amount of the trace is lost with the preempt version. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 05:15:57 +01:00
TRACE_ITER_PREEMPTONLY = 0x800,
TRACE_ITER_BRANCH = 0x1000,
TRACE_ITER_ANNOTATE = 0x2000,
TRACE_ITER_USERSTACKTRACE = 0x4000,
TRACE_ITER_SYM_USEROBJ = 0x8000,
trace: better manage the context info for events Impact: make trace_event more convenient for tracers All tracers (for the moment) that use the struct trace_event want to have the context info printed before their own output: the pid/cmdline, cpu, and timestamp. But some other tracers that want to implement their trace_event callbacks will not necessary need these information or they may want to format them as they want. This patch adds a new default-enabled trace option: TRACE_ITER_CONTEXT_INFO When disabled through: echo nocontext-info > /debugfs/tracing/trace_options The pid, cpu and timestamps headers will not be printed. IE with the sched_switch tracer with context-info (default): bash-2935 [001] 100.356561: 2935:120:S ==> [001] 0:140:R <idle> <idle>-0 [000] 100.412804: 0:140:R + [000] 11:115:S events/0 <idle>-0 [000] 100.412816: 0:140:R ==> [000] 11:115:R events/0 events/0-11 [000] 100.412829: 11:115:S ==> [000] 0:140:R <idle> Without context-info: 2935:120:S ==> [001] 0:140:R <idle> 0:140:R + [000] 11:115:S events/0 0:140:R ==> [000] 11:115:R events/0 11:115:S ==> [000] 0:140:R <idle> A tracer can disable it at runtime by clearing the bit TRACE_ITER_CONTEXT_INFO in trace_flags. The print routines were renamed to trace_print_context and trace_print_lat_context, so that they can be used by tracers if they want to use them for one of the trace_event callbacks. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-02 23:29:21 +01:00
TRACE_ITER_PRINTK_MSGONLY = 0x10000,
TRACE_ITER_CONTEXT_INFO = 0x20000, /* Print pid/cpu/time */
TRACE_ITER_LATENCY_FMT = 0x40000,
};
/*
* TRACE_ITER_SYM_MASK masks the options in trace_flags that
* control the output of kernel symbols.
*/
#define TRACE_ITER_SYM_MASK \
(TRACE_ITER_PRINT_PARENT|TRACE_ITER_SYM_OFFSET|TRACE_ITER_SYM_ADDR)
extern struct tracer nop_trace;
ftrace: introduce ftrace_preempt_disable()/enable() Impact: add new ftrace-plugin internal APIs Parts of the tracer needs to be careful about schedule recursion. If the NEED_RESCHED flag is set, a preempt_enable will call schedule. Inside the schedule function, the NEED_RESCHED flag is cleared. The problem arises when a trace happens in the schedule function but before NEED_RESCHED is cleared. The race is as follows: schedule() >> tracer called trace_function() preempt_disable() [ record trace ] preempt_enable() <<- here's the issue. [check NEED_RESCHED] schedule() [ Repeat the above, over and over again ] The naive approach is simply to use preempt_enable_no_schedule instead. The problem with that approach is that, although we solve the schedule recursion issue, we now might lose a preemption check when not in the schedule function. trace_function() preempt_disable() [ record trace ] [Interrupt comes in and sets NEED_RESCHED] preempt_enable_no_resched() [continue without scheduling] The way ftrace handles this problem is with the following approach: int resched; resched = need_resched(); preempt_disable_notrace(); [record trace] if (resched) preempt_enable_no_sched_notrace(); else preempt_enable_notrace(); This may seem like the opposite of what we want. If resched is set then we call the "no_sched" version?? The reason we do this is because if NEED_RESCHED is set before we disable preemption, there's two reasons for that: 1) we are in an atomic code path 2) we are already on our way to the schedule function, and maybe even in the schedule function, but have yet to clear the flag. Both the above cases we do not want to schedule. This solution has already been implemented within the ftrace infrastructure. But the problem is that it has been implemented several times. This patch encapsulates this code to two nice functions. resched = ftrace_preempt_disable(); [ record trace] ftrace_preempt_enable(resched); This way the tracers do not need to worry about getting it right. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 05:15:55 +01:00
/**
* ftrace_preempt_disable - disable preemption scheduler safe
*
* When tracing can happen inside the scheduler, there exists
* cases that the tracing might happen before the need_resched
* flag is checked. If this happens and the tracer calls
* preempt_enable (after a disable), a schedule might take place
* causing an infinite recursion.
*
* To prevent this, we read the need_resched flag before
ftrace: introduce ftrace_preempt_disable()/enable() Impact: add new ftrace-plugin internal APIs Parts of the tracer needs to be careful about schedule recursion. If the NEED_RESCHED flag is set, a preempt_enable will call schedule. Inside the schedule function, the NEED_RESCHED flag is cleared. The problem arises when a trace happens in the schedule function but before NEED_RESCHED is cleared. The race is as follows: schedule() >> tracer called trace_function() preempt_disable() [ record trace ] preempt_enable() <<- here's the issue. [check NEED_RESCHED] schedule() [ Repeat the above, over and over again ] The naive approach is simply to use preempt_enable_no_schedule instead. The problem with that approach is that, although we solve the schedule recursion issue, we now might lose a preemption check when not in the schedule function. trace_function() preempt_disable() [ record trace ] [Interrupt comes in and sets NEED_RESCHED] preempt_enable_no_resched() [continue without scheduling] The way ftrace handles this problem is with the following approach: int resched; resched = need_resched(); preempt_disable_notrace(); [record trace] if (resched) preempt_enable_no_sched_notrace(); else preempt_enable_notrace(); This may seem like the opposite of what we want. If resched is set then we call the "no_sched" version?? The reason we do this is because if NEED_RESCHED is set before we disable preemption, there's two reasons for that: 1) we are in an atomic code path 2) we are already on our way to the schedule function, and maybe even in the schedule function, but have yet to clear the flag. Both the above cases we do not want to schedule. This solution has already been implemented within the ftrace infrastructure. But the problem is that it has been implemented several times. This patch encapsulates this code to two nice functions. resched = ftrace_preempt_disable(); [ record trace] ftrace_preempt_enable(resched); This way the tracers do not need to worry about getting it right. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 05:15:55 +01:00
* disabling preemption. When we want to enable preemption we
* check the flag, if it is set, then we call preempt_enable_no_resched.
* Otherwise, we call preempt_enable.
*
* The rational for doing the above is that if need_resched is set
ftrace: introduce ftrace_preempt_disable()/enable() Impact: add new ftrace-plugin internal APIs Parts of the tracer needs to be careful about schedule recursion. If the NEED_RESCHED flag is set, a preempt_enable will call schedule. Inside the schedule function, the NEED_RESCHED flag is cleared. The problem arises when a trace happens in the schedule function but before NEED_RESCHED is cleared. The race is as follows: schedule() >> tracer called trace_function() preempt_disable() [ record trace ] preempt_enable() <<- here's the issue. [check NEED_RESCHED] schedule() [ Repeat the above, over and over again ] The naive approach is simply to use preempt_enable_no_schedule instead. The problem with that approach is that, although we solve the schedule recursion issue, we now might lose a preemption check when not in the schedule function. trace_function() preempt_disable() [ record trace ] [Interrupt comes in and sets NEED_RESCHED] preempt_enable_no_resched() [continue without scheduling] The way ftrace handles this problem is with the following approach: int resched; resched = need_resched(); preempt_disable_notrace(); [record trace] if (resched) preempt_enable_no_sched_notrace(); else preempt_enable_notrace(); This may seem like the opposite of what we want. If resched is set then we call the "no_sched" version?? The reason we do this is because if NEED_RESCHED is set before we disable preemption, there's two reasons for that: 1) we are in an atomic code path 2) we are already on our way to the schedule function, and maybe even in the schedule function, but have yet to clear the flag. Both the above cases we do not want to schedule. This solution has already been implemented within the ftrace infrastructure. But the problem is that it has been implemented several times. This patch encapsulates this code to two nice functions. resched = ftrace_preempt_disable(); [ record trace] ftrace_preempt_enable(resched); This way the tracers do not need to worry about getting it right. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 05:15:55 +01:00
* and we have yet to reschedule, we are either in an atomic location
* (where we do not need to check for scheduling) or we are inside
* the scheduler and do not want to resched.
*/
static inline int ftrace_preempt_disable(void)
{
int resched;
resched = need_resched();
preempt_disable_notrace();
return resched;
}
/**
* ftrace_preempt_enable - enable preemption scheduler safe
* @resched: the return value from ftrace_preempt_disable
*
* This is a scheduler safe way to enable preemption and not miss
* any preemption checks. The disabled saved the state of preemption.
* If resched is set, then we are either inside an atomic or
ftrace: introduce ftrace_preempt_disable()/enable() Impact: add new ftrace-plugin internal APIs Parts of the tracer needs to be careful about schedule recursion. If the NEED_RESCHED flag is set, a preempt_enable will call schedule. Inside the schedule function, the NEED_RESCHED flag is cleared. The problem arises when a trace happens in the schedule function but before NEED_RESCHED is cleared. The race is as follows: schedule() >> tracer called trace_function() preempt_disable() [ record trace ] preempt_enable() <<- here's the issue. [check NEED_RESCHED] schedule() [ Repeat the above, over and over again ] The naive approach is simply to use preempt_enable_no_schedule instead. The problem with that approach is that, although we solve the schedule recursion issue, we now might lose a preemption check when not in the schedule function. trace_function() preempt_disable() [ record trace ] [Interrupt comes in and sets NEED_RESCHED] preempt_enable_no_resched() [continue without scheduling] The way ftrace handles this problem is with the following approach: int resched; resched = need_resched(); preempt_disable_notrace(); [record trace] if (resched) preempt_enable_no_sched_notrace(); else preempt_enable_notrace(); This may seem like the opposite of what we want. If resched is set then we call the "no_sched" version?? The reason we do this is because if NEED_RESCHED is set before we disable preemption, there's two reasons for that: 1) we are in an atomic code path 2) we are already on our way to the schedule function, and maybe even in the schedule function, but have yet to clear the flag. Both the above cases we do not want to schedule. This solution has already been implemented within the ftrace infrastructure. But the problem is that it has been implemented several times. This patch encapsulates this code to two nice functions. resched = ftrace_preempt_disable(); [ record trace] ftrace_preempt_enable(resched); This way the tracers do not need to worry about getting it right. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 05:15:55 +01:00
* are inside the scheduler (we would have already scheduled
* otherwise). In this case, we do not want to call normal
* preempt_enable, but preempt_enable_no_resched instead.
*/
static inline void ftrace_preempt_enable(int resched)
{
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
}
#ifdef CONFIG_BRANCH_TRACER
extern int enable_branch_tracing(struct trace_array *tr);
extern void disable_branch_tracing(void);
static inline int trace_branch_enable(struct trace_array *tr)
{
if (trace_flags & TRACE_ITER_BRANCH)
return enable_branch_tracing(tr);
return 0;
}
static inline void trace_branch_disable(void)
{
/* due to races, always disable */
disable_branch_tracing();
}
#else
static inline int trace_branch_enable(struct trace_array *tr)
{
return 0;
}
static inline void trace_branch_disable(void)
{
}
#endif /* CONFIG_BRANCH_TRACER */
/* set ring buffers to default size if not already done so */
int tracing_update_buffers(void);
/* trace event type bit fields, not numeric */
enum {
TRACE_EVENT_TYPE_PRINTF = 1,
TRACE_EVENT_TYPE_RAW = 2,
};
tracing: add raw trace point recording infrastructure Impact: lower overhead tracing The current event tracer can automatically pick up trace points that are registered with the TRACE_FORMAT macro. But it required a printf format string and parsing. Although, this adds the ability to get guaranteed information like task names and such, it took a hit in overhead processing. This processing can add about 500-1000 nanoseconds overhead, but in some cases that too is considered too much and we want to shave off as much from this overhead as possible. Tom Zanussi recently posted tracing patches to lkml that are based on a nice idea about capturing the data via C structs using STRUCT_ENTER, STRUCT_EXIT type of macros. I liked that method very much, but did not like the implementation that required a developer to add data/code in several disjoint locations. This patch extends the event_tracer macros to do a similar "raw C" approach that Tom Zanussi did. But instead of having the developers needing to tweak a bunch of code all over the place, they can do it all in one macro - preferably placed near the code that it is tracing. That makes it much more likely that tracepoints will be maintained on an ongoing basis by the code they modify. The new macro TRACE_EVENT_FORMAT is created for this approach. (Note, a developer may still utilize the more low level DECLARE_TRACE macros if they don't care about getting their traces automatically in the event tracer.) They can also use the existing TRACE_FORMAT if they don't need to code the tracepoint in C, but just want to use the convenience of printf. So if the developer wants to "hardwire" a tracepoint in the fastest possible way, and wants to acquire their data via a user space utility in a raw binary format, or wants to see it in the trace output but not sacrifice any performance, then they can implement the faster but more complex TRACE_EVENT_FORMAT macro. Here's what usage looks like: TRACE_EVENT_FORMAT(name, TPPROTO(proto), TPARGS(args), TPFMT(fmt, fmt_args), TRACE_STUCT( TRACE_FIELD(type1, item1, assign1) TRACE_FIELD(type2, item2, assign2) [...] ), TPRAWFMT(raw_fmt) ); Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT uses. name: is the unique identifier of the trace point proto: The proto type that the trace point uses args: the args in the proto type fmt: printf format to use with the event printf tracer fmt_args: the printf argments to match fmt TRACE_STRUCT starts the ability to create a structure. Each item in the structure is defined with a TRACE_FIELD TRACE_FIELD(type, item, assign) type: the C type of item. item: the name of the item in the stucture assign: what to assign the item in the trace point callback raw_fmt is a way to pretty print the struct. It must match the order of the items are added in TRACE_STUCT An example of this would be: TRACE_EVENT_FORMAT(sched_wakeup, TPPROTO(struct rq *rq, struct task_struct *p, int success), TPARGS(rq, p, success), TPFMT("task %s:%d %s", p->comm, p->pid, success?"succeeded":"failed"), TRACE_STRUCT( TRACE_FIELD(pid_t, pid, p->pid) TRACE_FIELD(int, success, success) ), TPRAWFMT("task %d success=%d") ); This creates us a unique struct of: struct { pid_t pid; int success; }; And the way the call back would assign these values would be: entry->pid = p->pid; entry->success = success; The nice part about this is that the creation of the assignent is done via macro magic in the event tracer. Once the TRACE_EVENT_FORMAT is created, the developer will then have a faster method to record into the ring buffer. They do not need to worry about the tracer itself. The developer would only need to touch the files in include/trace/*.h Again, I would like to give special thanks to Tom Zanussi for this nice idea. Idea-from: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 01:12:30 +01:00
struct ftrace_event_call {
char *name;
char *system;
struct dentry *dir;
int enabled;
int (*regfunc)(void);
void (*unregfunc)(void);
int id;
int (*raw_init)(void);
int (*show_format)(struct trace_seq *s);
tracing: add raw trace point recording infrastructure Impact: lower overhead tracing The current event tracer can automatically pick up trace points that are registered with the TRACE_FORMAT macro. But it required a printf format string and parsing. Although, this adds the ability to get guaranteed information like task names and such, it took a hit in overhead processing. This processing can add about 500-1000 nanoseconds overhead, but in some cases that too is considered too much and we want to shave off as much from this overhead as possible. Tom Zanussi recently posted tracing patches to lkml that are based on a nice idea about capturing the data via C structs using STRUCT_ENTER, STRUCT_EXIT type of macros. I liked that method very much, but did not like the implementation that required a developer to add data/code in several disjoint locations. This patch extends the event_tracer macros to do a similar "raw C" approach that Tom Zanussi did. But instead of having the developers needing to tweak a bunch of code all over the place, they can do it all in one macro - preferably placed near the code that it is tracing. That makes it much more likely that tracepoints will be maintained on an ongoing basis by the code they modify. The new macro TRACE_EVENT_FORMAT is created for this approach. (Note, a developer may still utilize the more low level DECLARE_TRACE macros if they don't care about getting their traces automatically in the event tracer.) They can also use the existing TRACE_FORMAT if they don't need to code the tracepoint in C, but just want to use the convenience of printf. So if the developer wants to "hardwire" a tracepoint in the fastest possible way, and wants to acquire their data via a user space utility in a raw binary format, or wants to see it in the trace output but not sacrifice any performance, then they can implement the faster but more complex TRACE_EVENT_FORMAT macro. Here's what usage looks like: TRACE_EVENT_FORMAT(name, TPPROTO(proto), TPARGS(args), TPFMT(fmt, fmt_args), TRACE_STUCT( TRACE_FIELD(type1, item1, assign1) TRACE_FIELD(type2, item2, assign2) [...] ), TPRAWFMT(raw_fmt) ); Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT uses. name: is the unique identifier of the trace point proto: The proto type that the trace point uses args: the args in the proto type fmt: printf format to use with the event printf tracer fmt_args: the printf argments to match fmt TRACE_STRUCT starts the ability to create a structure. Each item in the structure is defined with a TRACE_FIELD TRACE_FIELD(type, item, assign) type: the C type of item. item: the name of the item in the stucture assign: what to assign the item in the trace point callback raw_fmt is a way to pretty print the struct. It must match the order of the items are added in TRACE_STUCT An example of this would be: TRACE_EVENT_FORMAT(sched_wakeup, TPPROTO(struct rq *rq, struct task_struct *p, int success), TPARGS(rq, p, success), TPFMT("task %s:%d %s", p->comm, p->pid, success?"succeeded":"failed"), TRACE_STRUCT( TRACE_FIELD(pid_t, pid, p->pid) TRACE_FIELD(int, success, success) ), TPRAWFMT("task %d success=%d") ); This creates us a unique struct of: struct { pid_t pid; int success; }; And the way the call back would assign these values would be: entry->pid = p->pid; entry->success = success; The nice part about this is that the creation of the assignent is done via macro magic in the event tracer. Once the TRACE_EVENT_FORMAT is created, the developer will then have a faster method to record into the ring buffer. They do not need to worry about the tracer itself. The developer would only need to touch the files in include/trace/*.h Again, I would like to give special thanks to Tom Zanussi for this nice idea. Idea-from: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-28 01:12:30 +01:00
};
void event_trace_printk(unsigned long ip, const char *fmt, ...);
extern struct ftrace_event_call __start_ftrace_events[];
extern struct ftrace_event_call __stop_ftrace_events[];
ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 21:20:42 +02:00
#endif /* _LINUX_KERNEL_TRACE_H */