diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index beadd3edaa17..a7b6217ac87b 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -24,6 +24,7 @@
 #include <linux/list.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/hardirq.h>
 #include <linux/dma-mapping.h>
@@ -650,6 +651,7 @@ static int clcdfb_of_init_display(struct clcd_fb *fb)
 {
 	struct device_node *endpoint;
 	int err;
+	unsigned int bpp;
 	u32 max_bandwidth;
 	u32 tft_r0b0g0[3];
 
@@ -667,11 +669,22 @@ static int clcdfb_of_init_display(struct clcd_fb *fb)
 
 	err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
 			&max_bandwidth);
-	if (!err)
-		fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres *
-				fb->panel->mode.yres * fb->panel->mode.refresh);
-	else
-		fb->panel->bpp = 32;
+	if (!err) {
+		/*
+		 * max_bandwidth is in bytes per second and pixclock in
+		 * pico-seconds, so the maximum allowed bits per pixel is
+		 *   8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
+		 * Rearrange this calculation to avoid overflow and then ensure
+		 * result is a valid format.
+		 */
+		bpp = max_bandwidth / (1000 / 8)
+			/ PICOS2KHZ(fb->panel->mode.pixclock);
+		bpp = rounddown_pow_of_two(bpp);
+		if (bpp > 32)
+			bpp = 32;
+	} else
+		bpp = 32;
+	fb->panel->bpp = bpp;
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	fb->panel->cntl |= CNTL_BEBO;
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index 92640d46770a..1d8bdb92939b 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1102,12 +1102,14 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
 	timings = of_get_display_timings(display_np);
 	if (!timings) {
 		dev_err(dev, "failed to get display timings\n");
+		ret = -EINVAL;
 		goto put_display_node;
 	}
 
 	timings_np = of_find_node_by_name(display_np, "display-timings");
 	if (!timings_np) {
 		dev_err(dev, "failed to find display-timings node\n");
+		ret = -ENODEV;
 		goto put_display_node;
 	}
 
diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 206a66b61072..59abdc6a97f6 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -273,7 +273,7 @@ static struct chips_init_reg chips_init_xr[] = {
 	{ 0xa8, 0x00 }
 };
 
-static void __init chips_hw_init(void)
+static void chips_hw_init(void)
 {
 	int i;
 
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 788f6b37fce7..10c876c95772 100644
--- a/drivers/video/fbdev/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -419,7 +419,7 @@ static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
 {
 	u32 reg;
 
-	reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf;
+	reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff;
 	reg |= (((back_porch-1) & 0xff) << 24)
 	    | (((front_porch-1) & 0xff) << 16)
 	    | (((pulse_width-1) & 0x3f) << 10);
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
index 987edf110038..5c098d5b4043 100644
--- a/drivers/video/of_display_timing.c
+++ b/drivers/video/of_display_timing.c
@@ -236,6 +236,7 @@ timingfail:
 	if (native_mode)
 		of_node_put(native_mode);
 	display_timings_release(disp);
+	disp = NULL;
 entryfail:
 	kfree(disp);
 dispfail: