skge: use dev_printk

Use dev_printk related macros for PCI related errors and warnings

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Stephen Hemminger 2007-02-02 08:22:52 -08:00 committed by Jeff Garzik
parent fae8759228
commit 1479d13cb5

View file

@ -2395,7 +2395,7 @@ static int skge_up(struct net_device *dev)
BUG_ON(skge->dma & 7);
if ((u64)skge->dma >> 32 != ((u64) skge->dma + skge->mem_size) >> 32) {
printk(KERN_ERR PFX "pci_alloc_consistent region crosses 4G boundary\n");
dev_err(&hw->pdev->dev, "pci_alloc_consistent region crosses 4G boundary\n");
err = -EINVAL;
goto free_pci_mem;
}
@ -3004,6 +3004,7 @@ static void skge_mac_intr(struct skge_hw *hw, int port)
/* Handle device specific framing and timeout interrupts */
static void skge_error_irq(struct skge_hw *hw)
{
struct pci_dev *pdev = hw->pdev;
u32 hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hw->chip_id == CHIP_ID_GENESIS) {
@ -3019,12 +3020,12 @@ static void skge_error_irq(struct skge_hw *hw)
}
if (hwstatus & IS_RAM_RD_PAR) {
printk(KERN_ERR PFX "Ram read data parity error\n");
dev_err(&pdev->dev, "Ram read data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR);
}
if (hwstatus & IS_RAM_WR_PAR) {
printk(KERN_ERR PFX "Ram write data parity error\n");
dev_err(&pdev->dev, "Ram write data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR);
}
@ -3035,38 +3036,38 @@ static void skge_error_irq(struct skge_hw *hw)
skge_mac_parity(hw, 1);
if (hwstatus & IS_R1_PAR_ERR) {
printk(KERN_ERR PFX "%s: receive queue parity error\n",
hw->dev[0]->name);
dev_err(&pdev->dev, "%s: receive queue parity error\n",
hw->dev[0]->name);
skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & IS_R2_PAR_ERR) {
printk(KERN_ERR PFX "%s: receive queue parity error\n",
hw->dev[1]->name);
dev_err(&pdev->dev, "%s: receive queue parity error\n",
hw->dev[1]->name);
skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) {
u16 pci_status, pci_cmd;
pci_read_config_word(hw->pdev, PCI_COMMAND, &pci_cmd);
pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status);
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
pci_read_config_word(pdev, PCI_STATUS, &pci_status);
printk(KERN_ERR PFX "%s: PCI error cmd=%#x status=%#x\n",
pci_name(hw->pdev), pci_cmd, pci_status);
dev_err(&pdev->dev, "PCI error cmd=%#x status=%#x\n",
pci_cmd, pci_status);
/* Write the error bits back to clear them. */
pci_status &= PCI_STATUS_ERROR_BITS;
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
pci_write_config_word(hw->pdev, PCI_COMMAND,
pci_write_config_word(pdev, PCI_COMMAND,
pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
pci_write_config_word(hw->pdev, PCI_STATUS, pci_status);
pci_write_config_word(pdev, PCI_STATUS, pci_status);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* if error still set then just ignore it */
hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hwstatus & IS_IRQ_STAT) {
printk(KERN_INFO PFX "unable to clear error (so ignoring them)\n");
dev_warn(&hw->pdev->dev, "unable to clear error (so ignoring them)\n");
hw->intr_mask &= ~IS_HW_ERR;
}
}
@ -3280,8 +3281,8 @@ static int skge_reset(struct skge_hw *hw)
hw->phy_addr = PHY_ADDR_BCOM;
break;
default:
printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
pci_name(hw->pdev), hw->phy_type);
dev_err(&hw->pdev->dev, "unsupported phy type 0x%x\n",
hw->phy_type);
return -EOPNOTSUPP;
}
break;
@ -3296,8 +3297,8 @@ static int skge_reset(struct skge_hw *hw)
break;
default:
printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
pci_name(hw->pdev), hw->chip_id);
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
hw->chip_id);
return -EOPNOTSUPP;
}
@ -3337,7 +3338,7 @@ static int skge_reset(struct skge_hw *hw)
/* avoid boards with stuck Hardware error bits */
if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
(skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
dev_warn(&hw->pdev->dev, "stuck hardware sensor bit\n");
hw->intr_mask &= ~IS_HW_ERR;
}
@ -3411,7 +3412,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
struct net_device *dev = alloc_etherdev(sizeof(*skge));
if (!dev) {
printk(KERN_ERR "skge etherdev alloc failed");
dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}
@ -3499,15 +3500,13 @@ static int __devinit skge_probe(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR PFX "%s cannot enable PCI device\n",
pci_name(pdev));
dev_err(&pdev->dev, "cannot enable PCI device\n");
goto err_out;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
pci_name(pdev));
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
goto err_out_disable_pdev;
}
@ -3522,8 +3521,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
}
if (err) {
printk(KERN_ERR PFX "%s no usable DMA configuration\n",
pci_name(pdev));
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_out_free_regions;
}
@ -3541,8 +3539,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
pci_name(pdev));
dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
@ -3553,8 +3550,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
printk(KERN_ERR PFX "%s: cannot map device registers\n",
pci_name(pdev));
dev_err(&pdev->dev, "cannot map device registers\n");
goto err_out_free_hw;
}
@ -3571,21 +3567,18 @@ static int __devinit skge_probe(struct pci_dev *pdev,
goto err_out_led_off;
/* Some motherboards are broken and has zero in ROM. */
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING PFX "%s: bad (zero?) ethernet address in rom\n",
pci_name(pdev));
}
if (!is_valid_ether_addr(dev->dev_addr))
dev_warn(&pdev->dev, "bad (zero?) ethernet address in rom\n");
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "%s: cannot register net device\n",
pci_name(pdev));
dev_err(&pdev->dev, "cannot register net device\n");
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
dev->name, pdev->irq);
goto err_out_unregister;
}
@ -3596,7 +3589,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
skge_show_addr(dev1);
else {
/* Failure to register second port need not be fatal */
printk(KERN_WARNING PFX "register of second port failed\n");
dev_warn(&pdev->dev, "register of second port failed\n");
hw->dev[1] = NULL;
free_netdev(dev1);
}