kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse source 
Conflicts:
	drivers/net/usb/asix_common.c
	net/ipv4/inet_connection_sock.c
	net/switchdev/switchdev.c

In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.

The other two conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2015-10-20 06:08:27 -07:00
commit 26440c835f
510 changed files with 4029 additions and 2205 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Documentation/device-mapper/snapshot.txt
View file

@ -41,9 +41,13 @@ useless and be disabled, returning errors. So it is important to monitor
the amount of free space and expand the <COW device> before it fills up.
<persistent?> is P (Persistent) or N (Not persistent - will not survive
after reboot).
The difference is that for transient snapshots less metadata must be
saved on disk - they can be kept in memory by the kernel.
after reboot). O (Overflow) can be added as a persistent store option
to allow userspace to advertise its support for seeing "Overflow" in the
snapshot status. So supported store types are "P", "PO" and "N".
The difference between persistent and transient is with transient
snapshots less metadata must be saved on disk - they can be kept in
memory by the kernel.
* snapshot-merge <origin> <COW device> <persistent> <chunksize>

2
Documentation/devicetree/bindings/input/cypress,cyapa.txt
View file

@ -25,7 +25,7 @@ Example:
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x24>;
reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;

2
Documentation/devicetree/bindings/spi/sh-msiof.txt
View file

@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings:
- renesas,tx-fifo-size : Overrides the default tx fifo size given in words
(default is 64)
- renesas,rx-fifo-size : Overrides the default rx fifo size given in words
(default is 64, or 256 on R-Car Gen2)
(default is 64)
Pinctrl properties might be needed, too. See
Documentation/devicetree/bindings/pinctrl/renesas,*.

1
Documentation/devicetree/bindings/usb/renesas_usbhs.txt
View file

@ -5,6 +5,7 @@ Required properties:
- "renesas,usbhs-r8a7790"
- "renesas,usbhs-r8a7791"
- "renesas,usbhs-r8a7794"
- "renesas,usbhs-r8a7795"
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs

2
Documentation/input/multi-touch-protocol.txt
View file

@ -361,7 +361,7 @@ For win8 devices with both T and C coordinates, the position mapping is
ABS_MT_POSITION_X := T_X
ABS_MT_POSITION_Y := T_Y
ABS_MT_TOOL_X := C_X
ABS_MT_TOOL_X := C_Y
ABS_MT_TOOL_Y := C_Y
Unfortunately, there is not enough information to specify both the touching
ellipse and the tool ellipse, so one has to resort to approximations. One

39
MAINTAINERS
View file

@ -3591,6 +3591,13 @@ F: drivers/gpu/drm/i915/
F: include/drm/i915*
F: include/uapi/drm/i915*
DRM DRIVERS FOR ATMEL HLCDC
M: Boris Brezillon <boris.brezillon@free-electrons.com>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/atmel-hlcdc/
F: Documentation/devicetree/bindings/drm/atmel/
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
M: Joonyoung Shim <jy0922.shim@samsung.com>
@ -3619,6 +3626,14 @@ S: Maintained
F: drivers/gpu/drm/imx/
F: Documentation/devicetree/bindings/drm/imx/
DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
M: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
L: dri-devel@lists.freedesktop.org
T: git git://github.com/patjak/drm-gma500
S: Maintained
F: drivers/gpu/drm/gma500
F: include/drm/gma500*
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
M: Terje Bergström <tbergstrom@nvidia.com>
@ -4003,7 +4018,7 @@ S: Maintained
F: sound/usb/misc/ua101.c
EXTENSIBLE FIRMWARE INTERFACE (EFI)
M: Matt Fleming <matt.fleming@intel.com>
M: Matt Fleming <matt@codeblueprint.co.uk>
L: linux-efi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
@ -4018,7 +4033,7 @@ F: include/linux/efi*.h
EFI VARIABLE FILESYSTEM
M: Matthew Garrett <matthew.garrett@nebula.com>
M: Jeremy Kerr <jk@ozlabs.org>
M: Matt Fleming <matt.fleming@intel.com>
M: Matt Fleming <matt@codeblueprint.co.uk>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
L: linux-efi@vger.kernel.org
S: Maintained
@ -6785,7 +6800,6 @@ F: drivers/scsi/megaraid/
MELLANOX ETHERNET DRIVER (mlx4_en)
M: Amir Vadai <amirv@mellanox.com>
M: Ido Shamay <idos@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
@ -9108,6 +9122,15 @@ S: Supported
F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
SYNOPSYS DESIGNWARE I2C DRIVER
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
M: Mika Westerberg <mika.westerberg@linux.intel.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-designware-*
F: include/linux/platform_data/i2c-designware.h
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
@ -9921,7 +9944,6 @@ S: Maintained
F: drivers/staging/lustre
STAGING - NVIDIA COMPLIANT EMBEDDED CONTROLLER INTERFACE (nvec)
M: Julian Andres Klode <jak@jak-linux.org>
M: Marc Dietrich <marvin24@gmx.de>
L: ac100@lists.launchpad.net (moderated for non-subscribers)
L: linux-tegra@vger.kernel.org
@ -11384,15 +11406,6 @@ W: http://oops.ghostprotocols.net:81/blog
S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
M: Mark Brown <broonie@kernel.org>
M: Liam Girdwood <lrg@slimlogic.co.uk>
L: linux-input@vger.kernel.org
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
L: patches@opensource.wolfsonmicro.com
T: git https://github.com/CirrusLogic/linux-drivers.git

4
Makefile
View file

@ -1,8 +1,8 @@
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
EXTRAVERSION = -rc6
NAME = Blurry Fish Butt
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

2
arch/alpha/include/asm/word-at-a-time.h
View file

@ -52,4 +52,6 @@ static inline unsigned long find_zero(unsigned long bits)
#endif
}
#define zero_bytemask(mask) ((2ul << (find_zero(mask) * 8)) - 1)
#endif /* _ASM_WORD_AT_A_TIME_H */

1
arch/arc/include/asm/Kbuild
View file

@ -48,4 +48,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

2
arch/arm/boot/dts/Makefile
View file

@ -578,7 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-itead-iteaduino-plus.dts \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \

1
arch/arm/boot/dts/exynos4412.dtsi
View file

@ -98,6 +98,7 @@
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
opp-suspend;
};
opp07 {
opp-hz = /bits/ 64 <900000000>;

1
arch/arm/boot/dts/exynos5250-smdk5250.dts
View file

@ -197,6 +197,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {

2
arch/arm/boot/dts/exynos5420.dtsi
View file

@ -1117,7 +1117,7 @@
interrupt-parent = <&combiner>;
interrupts = <3 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};

1
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
View file

@ -472,7 +472,6 @@
*/
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
pinctrl-names = "default";
samsung,pwm-outputs = <0>;
status = "okay";
};

2
arch/arm/boot/dts/imx53-qsrb.dts
View file

@ -36,7 +36,7 @@
pinctrl-0 = <&pinctrl_pmic>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <23 0x8>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
regulators {
sw1_reg: sw1a {
regulator-name = "SW1";

1
arch/arm/boot/dts/imx53.dtsi
View file

@ -15,6 +15,7 @@
#include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {

2
arch/arm/boot/dts/imx6qdl-rex.dtsi
View file

@ -35,7 +35,6 @@
compatible = "regulator-fixed";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@ -47,7 +46,6 @@
compatible = "regulator-fixed";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;

1
arch/arm/boot/dts/r8a7790.dtsi
View file

@ -1627,6 +1627,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
status = "disabled";

1
arch/arm/boot/dts/r8a7791.dtsi
View file

@ -1677,6 +1677,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
status = "disabled";

2
arch/arm/boot/dts/sun7i-a20.dtsi
View file

@ -107,7 +107,7 @@
720000 1200000
528000 1100000
312000 1000000
144000 900000
144000 1000000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;

27
arch/arm/mach-exynos/mcpm-exynos.c
View file

@ -20,6 +20,7 @@
#include <asm/cputype.h>
#include <asm/cp15.h>
#include <asm/mcpm.h>
#include <asm/smp_plat.h>
#include "regs-pmu.h"
#include "common.h"
@ -70,7 +71,31 @@ static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
cluster >= EXYNOS5420_NR_CLUSTERS)
return -EINVAL;
exynos_cpu_power_up(cpunr);
if (!exynos_cpu_power_state(cpunr)) {
exynos_cpu_power_up(cpunr);
/*
* This assumes the cluster number of the big cores(Cortex A15)
* is 0 and the Little cores(Cortex A7) is 1.
* When the system was booted from the Little core,
* they should be reset during power up cpu.
*/
if (cluster &&
cluster == MPIDR_AFFINITY_LEVEL(cpu_logical_map(0), 1)) {
/*
* Before we reset the Little cores, we should wait
* the SPARE2 register is set to 1 because the init
* codes of the iROM will set the register after
* initialization.
*/
while (!pmu_raw_readl(S5P_PMU_SPARE2))
udelay(10);
pmu_raw_writel(EXYNOS5420_KFC_CORE_RESET(cpu),
EXYNOS_SWRESET);
}
}
return 0;
}

6
arch/arm/mach-exynos/regs-pmu.h
View file

@ -513,6 +513,12 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
#define SPREAD_ENABLE 0xF
#define SPREAD_USE_STANDWFI 0xF
#define EXYNOS5420_KFC_CORE_RESET0 BIT(8)
#define EXYNOS5420_KFC_ETM_RESET0 BIT(20)
#define EXYNOS5420_KFC_CORE_RESET(_nr) \
((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
#define EXYNOS5420_BB_CON1 0x0784
#define EXYNOS5420_BB_SEL_EN BIT(31)
#define EXYNOS5420_BB_PMOS_EN BIT(7)

1
arch/arm/net/bpf_jit_32.c
View file

@ -626,6 +626,7 @@ load_common:
case BPF_LD | BPF_B | BPF_IND:
load_order = 0;
load_ind:
update_on_xread(ctx);
OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
goto load_common;
case BPF_LDX | BPF_IMM:

2
arch/arm64/Makefile
View file

@ -42,7 +42,7 @@ endif
CHECKFLAGS += -D__aarch64__
ifeq ($(CONFIG_ARM64_ERRATUM_843419), y)
CFLAGS_MODULE += -mcmodel=large
KBUILD_CFLAGS_MODULE += -mcmodel=large
endif
# Default value

4
arch/arm64/include/asm/pgtable.h
View file

@ -79,7 +79,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define PAGE_S2 __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
#define PAGE_S2_DEVICE __pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_TYPE_MASK) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
#define PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
@ -496,7 +496,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK;
PTE_PROT_NONE | PTE_VALID | PTE_WRITE;
/* preserve the hardware dirty information */
if (pte_hw_dirty(pte))
pte = pte_mkdirty(pte);

2
arch/arm64/include/asm/unistd.h
View file

@ -44,7 +44,7 @@
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
#define __NR_compat_syscalls 388
#define __NR_compat_syscalls 390
#endif
#define __ARCH_WANT_SYS_CLONE

9
arch/arm64/include/asm/unistd32.h
View file

@ -797,3 +797,12 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
__SYSCALL(__NR_bpf, sys_bpf)
#define __NR_execveat 387
__SYSCALL(__NR_execveat, compat_sys_execveat)
#define __NR_userfaultfd 388
__SYSCALL(__NR_userfaultfd, sys_userfaultfd)
#define __NR_membarrier 389
__SYSCALL(__NR_membarrier, sys_membarrier)
/*
* Please add new compat syscalls above this comment and update
* __NR_compat_syscalls in asm/unistd.h.
*/

3
arch/arm64/include/uapi/asm/signal.h
View file

@ -19,6 +19,9 @@
/* Required for AArch32 compatibility. */
#define SA_RESTORER 0x04000000
#define MINSIGSTKSZ 5120
#define SIGSTKSZ 16384
#include <asm-generic/signal.h>
#endif

23
arch/arm64/kernel/debug-monitors.c
View file

@ -201,7 +201,7 @@ void unregister_step_hook(struct step_hook *hook)
}
/*
* Call registered single step handers
* Call registered single step handlers
* There is no Syndrome info to check for determining the handler.
* So we call all the registered handlers, until the right handler is
* found which returns zero.
@ -271,20 +271,21 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
* Use reader/writer locks instead of plain spinlock.
*/
static LIST_HEAD(break_hook);
static DEFINE_RWLOCK(break_hook_lock);
static DEFINE_SPINLOCK(break_hook_lock);
void register_break_hook(struct break_hook *hook)
{
write_lock(&break_hook_lock);
list_add(&hook->node, &break_hook);
write_unlock(&break_hook_lock);
spin_lock(&break_hook_lock);
list_add_rcu(&hook->node, &break_hook);
spin_unlock(&break_hook_lock);
}
void unregister_break_hook(struct break_hook *hook)
{
write_lock(&break_hook_lock);
list_del(&hook->node);
write_unlock(&break_hook_lock);
spin_lock(&break_hook_lock);
list_del_rcu(&hook->node);
spin_unlock(&break_hook_lock);
synchronize_rcu();
}
static int call_break_hook(struct pt_regs *regs, unsigned int esr)
@ -292,11 +293,11 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
struct break_hook *hook;
int (*fn)(struct pt_regs *regs, unsigned int esr) = NULL;
read_lock(&break_hook_lock);
list_for_each_entry(hook, &break_hook, node)
rcu_read_lock();
list_for_each_entry_rcu(hook, &break_hook, node)
if ((esr & hook->esr_mask) == hook->esr_val)
fn = hook->fn;
read_unlock(&break_hook_lock);
rcu_read_unlock();
return fn ? fn(regs, esr) : DBG_HOOK_ERROR;
}

3
arch/arm64/kernel/efi.c
View file

@ -258,7 +258,8 @@ static bool __init efi_virtmap_init(void)
*/
if (!is_normal_ram(md))
prot = __pgprot(PROT_DEVICE_nGnRE);
else if (md->type == EFI_RUNTIME_SERVICES_CODE)
else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
!PAGE_ALIGNED(md->phys_addr))
prot = PAGE_KERNEL_EXEC;
else
prot = PAGE_KERNEL;

22
arch/arm64/kernel/entry-ftrace.S
View file

@ -178,6 +178,24 @@ ENTRY(ftrace_stub)
ENDPROC(ftrace_stub)
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* save return value regs*/
.macro save_return_regs
sub sp, sp, #64
stp x0, x1, [sp]
stp x2, x3, [sp, #16]
stp x4, x5, [sp, #32]
stp x6, x7, [sp, #48]
.endm
/* restore return value regs*/
.macro restore_return_regs
ldp x0, x1, [sp]
ldp x2, x3, [sp, #16]
ldp x4, x5, [sp, #32]
ldp x6, x7, [sp, #48]
add sp, sp, #64
.endm
/*
* void ftrace_graph_caller(void)
*
@ -204,11 +222,11 @@ ENDPROC(ftrace_graph_caller)
* only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
*/
ENTRY(return_to_handler)
str x0, [sp, #-16]!
save_return_regs
mov x0, x29 // parent's fp
bl ftrace_return_to_handler// addr = ftrace_return_to_hander(fp);
mov x30, x0 // restore the original return address
ldr x0, [sp], #16
restore_return_regs
ret
END(return_to_handler)
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */

6
arch/arm64/kernel/insn.c
View file

@ -85,7 +85,7 @@ bool aarch64_insn_is_branch_imm(u32 insn)
aarch64_insn_is_bcond(insn));
}
static DEFINE_SPINLOCK(patch_lock);
static DEFINE_RAW_SPINLOCK(patch_lock);
static void __kprobes *patch_map(void *addr, int fixmap)
{
@ -131,13 +131,13 @@ static int __kprobes __aarch64_insn_write(void *addr, u32 insn)
unsigned long flags = 0;
int ret;
spin_lock_irqsave(&patch_lock, flags);
raw_spin_lock_irqsave(&patch_lock, flags);
waddr = patch_map(addr, FIX_TEXT_POKE0);
ret = probe_kernel_write(waddr, &insn, AARCH64_INSN_SIZE);
patch_unmap(FIX_TEXT_POKE0);
spin_unlock_irqrestore(&patch_lock, flags);
raw_spin_unlock_irqrestore(&patch_lock, flags);
return ret;
}

2
arch/arm64/kernel/setup.c
View file

@ -364,6 +364,8 @@ static void __init relocate_initrd(void)
to_free = ram_end - orig_start;
size = orig_end - orig_start;
if (!size)
return;
/* initrd needs to be relocated completely inside linear mapping */
new_start = memblock_find_in_range(0, PFN_PHYS(max_pfn),

1
arch/arm64/mm/fault.c
View file

@ -287,6 +287,7 @@ retry:
* starvation.
*/
mm_flags &= ~FAULT_FLAG_ALLOW_RETRY;
mm_flags |= FAULT_FLAG_TRIED;
goto retry;
}
}

1
arch/avr32/include/asm/Kbuild
View file

@ -20,4 +20,5 @@ generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/blackfin/include/asm/Kbuild
View file

@ -46,4 +46,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/c6x/include/asm/Kbuild
View file

@ -59,4 +59,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/cris/include/asm/Kbuild
View file

@ -43,4 +43,5 @@ generic-y += topology.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/frv/include/asm/Kbuild
View file

@ -7,3 +7,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

1
arch/h8300/include/asm/Kbuild
View file

@ -73,4 +73,5 @@ generic-y += uaccess.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/hexagon/include/asm/Kbuild
View file

@ -58,4 +58,5 @@ generic-y += types.h
generic-y += ucontext.h
generic-y += unaligned.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/ia64/include/asm/Kbuild
View file

@ -8,3 +8,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += vtime.h
generic-y += word-at-a-time.h

1
arch/m32r/include/asm/Kbuild
View file

@ -9,3 +9,4 @@ generic-y += module.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

9
arch/m68k/configs/amiga_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -57,7 +58,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -67,10 +67,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -179,6 +181,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -206,6 +209,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -370,6 +375,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -537,6 +543,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/apollo_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -344,6 +349,7 @@ CONFIG_VETH=m
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -495,6 +501,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/atari_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -355,6 +360,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -517,6 +523,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/bvme6000_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_BVME6000_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/hp300_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -55,7 +56,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -65,10 +65,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -177,6 +179,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -204,6 +207,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -269,6 +273,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -345,6 +350,7 @@ CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -497,6 +503,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mac_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -54,7 +55,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -64,10 +64,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -176,6 +178,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -203,6 +206,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -271,6 +275,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -364,6 +369,7 @@ CONFIG_MAC8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -519,6 +525,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/multi_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -64,7 +65,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -74,10 +74,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -186,6 +188,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -213,6 +216,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -281,6 +285,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -410,6 +415,7 @@ CONFIG_ZORRO8390=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -599,6 +605,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mvme147_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -52,7 +53,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -62,10 +62,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -174,6 +176,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -201,6 +204,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -266,6 +270,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME147_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/mvme16x_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -343,6 +348,7 @@ CONFIG_MVME16x_NET=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -488,6 +494,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/q40_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -53,7 +54,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -63,10 +63,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -175,6 +177,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -202,6 +205,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -267,6 +271,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -354,6 +359,7 @@ CONFIG_NE2000=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PLIP=m
@ -510,6 +516,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

9
arch/m68k/configs/sun3_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3_82586=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_MANAGER=y

9
arch/m68k/configs/sun3x_defconfig
View file

@ -10,6 +10,7 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_USERFAULTFD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@ -50,7 +51,6 @@ CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPVTI=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_GENEVE_CORE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -60,10 +60,12 @@ CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_IPV6=m
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_ILA=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_GRE=m
CONFIG_NETFILTER=y
@ -172,6 +174,7 @@ CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_LOG_ARP=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
@ -199,6 +202,7 @@ CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
@ -264,6 +268,7 @@ CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
@ -341,6 +346,7 @@ CONFIG_SUN3LANCE=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_PPP=m
@ -489,6 +495,7 @@ CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_TEST_STATIC_KEYS=m
CONFIG_EARLY_PRINTK=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_CRYPTO_RSA=m

30
arch/m68k/include/asm/linkage.h
View file

@ -4,4 +4,34 @@
#define __ALIGN .align 4
#define __ALIGN_STR ".align 4"
/*
* Make sure the compiler doesn't do anything stupid with the
* arguments on the stack - they are owned by the *caller*, not
* the callee. This just fools gcc into not spilling into them,
* and keeps it from doing tailcall recursion and/or using the
* stack slots for temporaries, since they are live and "used"
* all the way to the end of the function.
*/
#define asmlinkage_protect(n, ret, args...) \
__asmlinkage_protect##n(ret, ##args)
#define __asmlinkage_protect_n(ret, args...) \
__asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
#define __asmlinkage_protect0(ret) \
__asmlinkage_protect_n(ret)
#define __asmlinkage_protect1(ret, arg1) \
__asmlinkage_protect_n(ret, "m" (arg1))
#define __asmlinkage_protect2(ret, arg1, arg2) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2))
#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3))
#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4))
#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5))
#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
__asmlinkage_protect_n(ret, "m" (arg1), "m" (arg2), "m" (arg3), \
"m" (arg4), "m" (arg5), "m" (arg6))
#endif

2
arch/m68k/include/asm/unistd.h
View file

@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
#define NR_syscalls 356
#define NR_syscalls 375
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT

19
arch/m68k/include/uapi/asm/unistd.h
View file

@ -361,5 +361,24 @@
#define __NR_memfd_create 353
#define __NR_bpf 354
#define __NR_execveat 355
#define __NR_socket 356
#define __NR_socketpair 357
#define __NR_bind 358
#define __NR_connect 359
#define __NR_listen 360
#define __NR_accept4 361
#define __NR_getsockopt 362
#define __NR_setsockopt 363
#define __NR_getsockname 364
#define __NR_getpeername 365
#define __NR_sendto 366
#define __NR_sendmsg 367
#define __NR_recvfrom 368
#define __NR_recvmsg 369
#define __NR_shutdown 370
#define __NR_recvmmsg 371
#define __NR_sendmmsg 372
#define __NR_userfaultfd 373
#define __NR_membarrier 374
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */

20
arch/m68k/kernel/syscalltable.S
View file

@ -376,4 +376,22 @@ ENTRY(sys_call_table)
.long sys_memfd_create
.long sys_bpf
.long sys_execveat /* 355 */
.long sys_socket
.long sys_socketpair
.long sys_bind
.long sys_connect
.long sys_listen /* 360 */
.long sys_accept4
.long sys_getsockopt
.long sys_setsockopt
.long sys_getsockname
.long sys_getpeername /* 365 */
.long sys_sendto
.long sys_sendmsg
.long sys_recvfrom
.long sys_recvmsg
.long sys_shutdown /* 370 */
.long sys_recvmmsg
.long sys_sendmmsg
.long sys_userfaultfd
.long sys_membarrier

1
arch/metag/include/asm/Kbuild
View file

@ -54,4 +54,5 @@ generic-y += ucontext.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/microblaze/include/asm/Kbuild
View file

@ -10,3 +10,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += syscalls.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

2
arch/mips/cavium-octeon/setup.c
View file

@ -933,7 +933,7 @@ void __init plat_mem_setup(void)
while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
&& (total < MAX_MEMORY)) {
memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
__pa_symbol(&__init_end), -1,
__pa_symbol(&_end), -1,
0x100000,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
if (memory >= 0) {

1
arch/mips/include/asm/Kbuild
View file

@ -17,4 +17,5 @@ generic-y += segment.h
generic-y += serial.h
generic-y += trace_clock.h
generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h

1
arch/mips/include/asm/io.h
View file

@ -256,6 +256,7 @@ static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long si
*/
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
#define ioremap_uc ioremap_nocache
/*
* ioremap_cachable - map bus memory into CPU space

19
arch/mips/include/uapi/asm/swab.h
View file

@ -13,16 +13,15 @@
#define __SWAB_64_THRU_32__
#if (defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
defined(_MIPS_ARCH_LOONGSON3A)
#if !defined(__mips16) && \
((defined(__mips_isa_rev) && (__mips_isa_rev >= 2)) || \
defined(_MIPS_ARCH_LOONGSON3A))
static inline __attribute__((nomips16)) __attribute_const__
__u16 __arch_swab16(__u16 x)
static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
" .set nomips16 \n"
" wsbh %0, %1 \n"
" .set pop \n"
: "=r" (x)
@ -32,13 +31,11 @@ static inline __attribute__((nomips16)) __attribute_const__
}
#define __arch_swab16 __arch_swab16
static inline __attribute__((nomips16)) __attribute_const__
__u32 __arch_swab32(__u32 x)
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__asm__(
" .set push \n"
" .set arch=mips32r2 \n"
" .set nomips16 \n"
" wsbh %0, %1 \n"
" rotr %0, %0, 16 \n"
" .set pop \n"
@ -54,13 +51,11 @@ static inline __attribute__((nomips16)) __attribute_const__
* 64-bit kernel on r2 CPUs.
*/
#ifdef __mips64
static inline __attribute__((nomips16)) __attribute_const__
__u64 __arch_swab64(__u64 x)
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
" .set push \n"
" .set arch=mips64r2 \n"
" .set nomips16 \n"
" dsbh %0, %1 \n"
" dshd %0, %0 \n"
" .set pop \n"
@ -71,5 +66,5 @@ static inline __attribute__((nomips16)) __attribute_const__
}
#define __arch_swab64 __arch_swab64
#endif /* __mips64 */
#endif /* MIPS R2 or newer or Loongson 3A */
#endif /* (not __mips16) and (MIPS R2 or newer or Loongson 3A) */
#endif /* _ASM_SWAB_H */

18
arch/mips/include/uapi/asm/unistd.h
View file

@ -377,16 +377,18 @@
#define __NR_memfd_create (__NR_Linux + 354)
#define __NR_bpf (__NR_Linux + 355)
#define __NR_execveat (__NR_Linux + 356)
#define __NR_userfaultfd (__NR_Linux + 357)
#define __NR_membarrier (__NR_Linux + 358)
/*
* Offset of the last Linux o32 flavoured syscall
*/
#define __NR_Linux_syscalls 356
#define __NR_Linux_syscalls 358
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
#define __NR_O32_Linux_syscalls 356
#define __NR_O32_Linux_syscalls 358
#if _MIPS_SIM == _MIPS_SIM_ABI64
@ -711,16 +713,18 @@
#define __NR_memfd_create (__NR_Linux + 314)
#define __NR_bpf (__NR_Linux + 315)
#define __NR_execveat (__NR_Linux + 316)
#define __NR_userfaultfd (__NR_Linux + 317)
#define __NR_membarrier (__NR_Linux + 318)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
#define __NR_Linux_syscalls 316
#define __NR_Linux_syscalls 318
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
#define __NR_64_Linux_syscalls 316
#define __NR_64_Linux_syscalls 318
#if _MIPS_SIM == _MIPS_SIM_NABI32
@ -1049,15 +1053,17 @@
#define __NR_memfd_create (__NR_Linux + 318)
#define __NR_bpf (__NR_Linux + 319)
#define __NR_execveat (__NR_Linux + 320)
#define __NR_userfaultfd (__NR_Linux + 321)
#define __NR_membarrier (__NR_Linux + 322)
/*
* Offset of the last N32 flavoured syscall
*/
#define __NR_Linux_syscalls 320
#define __NR_Linux_syscalls 322
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
#define __NR_N32_Linux_syscalls 320
#define __NR_N32_Linux_syscalls 322
#endif /* _UAPI_ASM_UNISTD_H */

1
arch/mips/jz4740/board-qi_lb60.c
View file

@ -26,6 +26,7 @@
#include <linux/power/jz4740-battery.h>
#include <linux/power/gpio-charger.h>
#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/jz4740_mmc.h>
#include <asm/mach-jz4740/jz4740_nand.h>

1
arch/mips/jz4740/gpio.c
View file

@ -28,6 +28,7 @@
#include <linux/seq_file.h>
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/gpio.h>
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)

12
arch/mips/kernel/cps-vec.S
View file

@ -39,6 +39,7 @@
mfc0 \dest, CP0_CONFIG, 3
andi \dest, \dest, MIPS_CONF3_MT
beqz \dest, \nomt
nop
.endm
.section .text.cps-vec
@ -223,10 +224,9 @@ LEAF(excep_ejtag)
END(excep_ejtag)
LEAF(mips_cps_core_init)
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* Check that the core implements the MT ASE */
has_mt t0, 3f
nop
.set push
.set mips64r2
@ -310,8 +310,9 @@ LEAF(mips_cps_boot_vpes)
PTR_ADDU t0, t0, t1
/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
li t9, 0
#ifdef CONFIG_MIPS_MT_SMP
has_mt ta2, 1f
li t9, 0
/* Find the number of VPEs present in the core */
mfc0 t1, CP0_MVPCONF0
@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes)
/* Retrieve the VPE ID from EBase.CPUNum */
mfc0 t9, $15, 1
and t9, t9, t1
#endif
1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
li t1, VPEBOOTCFG_SIZE
@ -337,7 +339,7 @@ LEAF(mips_cps_boot_vpes)
PTR_L ta3, COREBOOTCFG_VPECONFIG(t0)
PTR_ADDU v0, v0, ta3
#ifdef CONFIG_MIPS_MT
#ifdef CONFIG_MIPS_MT_SMP
/* If the core doesn't support MT then return */
bnez ta2, 1f
@ -451,7 +453,7 @@ LEAF(mips_cps_boot_vpes)
2: .set pop
#endif /* CONFIG_MIPS_MT */
#endif /* CONFIG_MIPS_MT_SMP */
/* Return */
jr ra

26
arch/mips/kernel/octeon_switch.S
View file

@ -18,7 +18,7 @@
.set pop
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
.align 7
LEAF(resume)
@ -28,30 +28,6 @@
cpu_save_nonscratch a0
LONG_S ra, THREAD_REG31(a0)
/*
* check if we need to save FPU registers
*/
.set push
.set noreorder
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
.set pop
/*
* clear saved user stack CU1 bit
*/
LONG_L t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
LONG_S t0, ST_OFF(t3)
.set push
.set arch=mips64r2
fpu_save_double a0 t0 t1 # c0_status passed in t0
# clobbers t1
.set pop
1:
#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
/* Check if we need to store CVMSEG state */
dmfc0 t0, $11,7 /* CvmMemCtl */

28
arch/mips/kernel/r2300_switch.S
View file

@ -30,19 +30,9 @@
*/
#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
/*
* FPU context is saved iff the process has used it's FPU in the current
* time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user
* space STATUS register should be 0, so that a process *always* starts its
* userland with FPU disabled after each context switch.
*
* FPU will be enabled as soon as the process accesses FPU again, through
* do_cpu() trap.
*/
/*
* task_struct *resume(task_struct *prev, task_struct *next,
* struct thread_info *next_ti, int usedfpu)
* struct thread_info *next_ti)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
@ -50,22 +40,6 @@ LEAF(resume)
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
beqz a3, 1f
PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
*/
lw t0, ST_OFF(t3)
li t1, ~ST0_CU1
and t0, t0, t1
sw t0, ST_OFF(t3)
fpu_save_single a0, t0 # clobbers t0
1:
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
PTR_LA t8, __stack_chk_guard
LONG_L t9, TASK_STACK_CANARY(a1)

41
arch/mips/kernel/scall32-o32.S
View file

@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp)
lw t1, PT_EPC(sp) # skip syscall on return
subu v0, v0, __NR_O32_Linux # check syscall number
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
addiu t1, 4 # skip to next instruction
sw t1, PT_EPC(sp)
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
sw a3, PT_R26(sp) # save a3 for syscall restarting
@ -96,6 +88,16 @@ loads_done:
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
bnez t0, syscall_trace_entry # -> yes
syscall_common:
sltiu t0, v0, __NR_O32_Linux_syscalls + 1
beqz t0, illegal_syscall
sll t0, v0, 2
la t1, sys_call_table
addu t1, t0
lw t2, (t1) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
@ -116,7 +118,7 @@ o32_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
/*
@ -129,27 +131,18 @@ syscall_trace_entry:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move v0, s0 # restore syscall
move t0, s0
RESTORE_STATIC
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
lw t1, PT_R2(sp) # syscall number
negu v0 # error
sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
@ -599,3 +592,5 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier

40
arch/mips/kernel/scall64-64.S
View file

@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp)
.set at
#endif
dsubu t0, v0, __NR_64_Linux # check syscall number
sltiu t0, t0, __NR_64_Linux_syscalls + 1
#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
ld t1, PT_EPC(sp) # skip syscall on return
daddiu t1, 4 # skip to next instruction
sd t1, PT_EPC(sp)
#endif
beqz t0, illegal_syscall
dsll t0, v0, 3 # offset into table
ld t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
# syscall routine
sd a3, PT_R26(sp) # save a3 for syscall restarting
@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp)
and t0, t1, t0
bnez t0, syscall_trace_entry
syscall_common:
dsubu t2, v0, __NR_64_Linux
sltiu t0, t2, __NR_64_Linux_syscalls + 1
beqz t0, illegal_syscall
dsll t0, t2, 3 # offset into table
dla t2, sys_call_table
daddu t0, t2, t0
ld t2, (t0) # syscall routine
beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -78,14 +82,14 @@ n64_syscall_exit:
syscall_trace_entry:
SAVE_STATIC
move s0, t2
move s0, v0
move a0, sp
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move v0, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -93,19 +97,9 @@ syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
illegal_syscall:
/* This also isn't a 64-bit syscall, throw an error. */
@ -436,4 +430,6 @@ EXPORT(sys_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 5315 */
PTR sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys_call_table,.-sys_call_table

21
arch/mips/kernel/scall64-n32.S
View file

@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
and t0, t1, t0
bnez t0, n32_syscall_trace_entry
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -75,9 +76,9 @@ n32_syscall_trace_entry:
move a1, v0
jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -85,19 +86,9 @@ n32_syscall_trace_entry:
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
not_n32_scall:
/* This is not an n32 compatibility syscall, pass it on to
@ -429,4 +420,6 @@ EXPORT(sysn32_call_table)
PTR sys_memfd_create
PTR sys_bpf
PTR compat_sys_execveat /* 6320 */
PTR sys_userfaultfd
PTR sys_membarrier
.size sysn32_call_table,.-sysn32_call_table

21
arch/mips/kernel/scall64-o32.S
View file

@ -87,6 +87,7 @@ loads_done:
and t0, t1, t0
bnez t0, trace_a_syscall
syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
@ -130,9 +131,9 @@ trace_a_syscall:
1: jal syscall_trace_enter
bltz v0, 2f # seccomp failed? Skip syscall
bltz v0, 1f # seccomp failed? Skip syscall
move t0, s0
move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@ -142,19 +143,9 @@ trace_a_syscall:
ld a5, PT_R9(sp)
ld a6, PT_R10(sp)
ld a7, PT_R11(sp) # For indirect syscalls
jalr t0
j syscall_common
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
2: j syscall_exit
1: j syscall_exit
/* ------------------------------------------------------------------------ */
@ -584,4 +575,6 @@ EXPORT(sys32_call_table)
PTR sys_memfd_create
PTR sys_bpf /* 4355 */
PTR compat_sys_execveat
PTR sys_userfaultfd
PTR sys_membarrier
.size sys32_call_table,.-sys32_call_table

2
arch/mips/mm/dma-default.c
View file

@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
else
#endif
#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
dma_flag = __GFP_DMA;
else
#endif

13
arch/mips/net/bpf_jit_asm.S
View file

@ -57,12 +57,13 @@
LEAF(sk_load_word)
is_offset_negative(word)
.globl sk_load_word_positive
sk_load_word_positive:
FEXPORT(sk_load_word_positive)
is_offset_in_header(4, word)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lw $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
@ -85,12 +86,13 @@ sk_load_word_positive:
LEAF(sk_load_half)
is_offset_negative(half)
.globl sk_load_half_positive
sk_load_half_positive:
FEXPORT(sk_load_half_positive)
is_offset_in_header(2, half)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset
.set reorder
lh $r_A, 0(t1)
.set noreorder
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
@ -109,8 +111,7 @@ sk_load_half_positive:
LEAF(sk_load_byte)
is_offset_negative(byte)
.globl sk_load_byte_positive
sk_load_byte_positive:
FEXPORT(sk_load_byte_positive)
is_offset_in_header(1, byte)
/* Offset within header boundaries */
PTR_ADDU t1, $r_skb_data, offset

1
arch/mn10300/include/asm/Kbuild
View file

@ -9,3 +9,4 @@ generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

1
arch/nios2/include/asm/Kbuild
View file

@ -61,4 +61,5 @@ generic-y += types.h
generic-y += unaligned.h
generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h

2
arch/powerpc/configs/ppc64_defconfig
View file

@ -111,7 +111,7 @@ CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y

2
arch/powerpc/configs/pseries_defconfig
View file

@ -114,7 +114,7 @@ CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y

9
arch/powerpc/include/asm/machdep.h
View file

@ -61,8 +61,13 @@ struct machdep_calls {
unsigned long addr,
unsigned char *hpte_slot_array,
int psize, int ssize, int local);
/* special for kexec, to be called in real mode, linear mapping is
* destroyed as well */
/*
* Special for kexec.
* To be called in real mode with interrupts disabled. No locks are
* taken as such, concurrent access on pre POWER5 hardware could result
* in a deadlock.
* The linear mapping is destroyed as well.
*/
void (*hpte_clear_all)(void);
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,

5
arch/powerpc/include/asm/word-at-a-time.h
View file

@ -40,6 +40,11 @@ static inline bool has_zero(unsigned long val, unsigned long *data, const struct
return (val + c->high_bits) & ~rhs;
}
static inline unsigned long zero_bytemask(unsigned long mask)
{
return ~1ul << __fls(mask);
}
#else
#ifdef CONFIG_64BIT

23
arch/powerpc/mm/hash_native_64.c
View file

@ -582,13 +582,21 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
* be when they isi), and we are the only one left. We rely on our kernel
* mapping being 0xC0's and the hardware ignoring those two real bits.
*
* This must be called with interrupts disabled.
*
* Taking the native_tlbie_lock is unsafe here due to the possibility of
* lockdep being on. On pre POWER5 hardware, not taking the lock could
* cause deadlock. POWER5 and newer not taking the lock is fine. This only
* gets called during boot before secondary CPUs have come up and during
* crashdump and all bets are off anyway.
*
* TODO: add batching support when enabled. remember, no dynamic memory here,
* athough there is the control page available...
*/
static void native_hpte_clear(void)
{
unsigned long vpn = 0;
unsigned long slot, slots, flags;
unsigned long slot, slots;
struct hash_pte *hptep = htab_address;
unsigned long hpte_v;
unsigned long pteg_count;
@ -596,13 +604,6 @@ static void native_hpte_clear(void)
pteg_count = htab_hash_mask + 1;
local_irq_save(flags);
/* we take the tlbie lock and hold it. Some hardware will
* deadlock if we try to tlbie from two processors at once.
*/
raw_spin_lock(&native_tlbie_lock);
slots = pteg_count * HPTES_PER_GROUP;
for (slot = 0; slot < slots; slot++, hptep++) {
@ -614,8 +615,8 @@ static void native_hpte_clear(void)
hpte_v = be64_to_cpu(hptep->v);
/*
* Call __tlbie() here rather than tlbie() since we
* already hold the native_tlbie_lock.
* Call __tlbie() here rather than tlbie() since we can't take the
* native_tlbie_lock.
*/
if (hpte_v & HPTE_V_VALID) {
hpte_decode(hptep, slot, &psize, &apsize, &ssize, &vpn);
@ -625,8 +626,6 @@ static void native_hpte_clear(void)
}
asm volatile("eieio; tlbsync; ptesync":::"memory");
raw_spin_unlock(&native_tlbie_lock);
local_irq_restore(flags);
}
/*

7
arch/powerpc/platforms/powernv/opal.c
View file

@ -487,9 +487,12 @@ int opal_machine_check(struct pt_regs *regs)
* PRD component would have already got notified about this
* error through other channels.
*
* In any case, let us just fall through. We anyway heading
* down to panic path.
* If hardware marked this as an unrecoverable MCE, we are
* going to panic anyway. Even if it didn't, it's not safe to
* continue at this point, so we should explicitly panic.
*/
panic("PowerNV Unrecovered Machine Check");
return 0;
}

5
arch/powerpc/platforms/ps3/os-area.c
View file

@ -194,11 +194,6 @@ static const struct os_area_db_id os_area_db_id_rtc_diff = {
.key = OS_AREA_DB_KEY_RTC_DIFF
};
static const struct os_area_db_id os_area_db_id_video_mode = {
.owner = OS_AREA_DB_OWNER_LINUX,
.key = OS_AREA_DB_KEY_VIDEO_MODE
};
#define SECONDS_FROM_1970_TO_2000 946684800LL
/**

2
arch/s390/boot/compressed/Makefile
View file

@ -10,7 +10,7 @@ targets += misc.o piggy.o sizes.h head.o
KBUILD_CFLAGS := -m64 -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
KBUILD_CFLAGS += $(cflags-y) -fno-delete-null-pointer-checks
KBUILD_CFLAGS += $(cflags-y) -fno-delete-null-pointer-checks -msoft-float
KBUILD_CFLAGS += $(call cc-option,-mpacked-stack)
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)

2
arch/s390/configs/default_defconfig
View file

@ -381,7 +381,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m

2
arch/s390/configs/gcov_defconfig
View file

@ -377,7 +377,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m

2
arch/s390/configs/performance_defconfig
View file

@ -377,7 +377,7 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m

1
arch/s390/include/asm/Kbuild
View file

@ -6,3 +6,4 @@ generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h

2
arch/s390/include/asm/numa.h
View file

@ -19,7 +19,7 @@ int numa_pfn_to_nid(unsigned long pfn);
int __node_distance(int a, int b);
void numa_update_cpu_topology(void);
extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
extern cpumask_t node_to_cpumask_map[MAX_NUMNODES];
extern int numa_debug_enabled;
#else

2
arch/s390/include/asm/topology.h
View file

@ -68,7 +68,7 @@ static inline int cpu_to_node(int cpu)
#define cpumask_of_node cpumask_of_node
static inline const struct cpumask *cpumask_of_node(int node)
{
return node_to_cpumask_map[node];
return &node_to_cpumask_map[node];
}
/*

1
arch/s390/kernel/asm-offsets.c
View file

@ -176,6 +176,7 @@ int main(void)
DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste));
DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area));
DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr));
DEFINE(__LC_PERCPU_OFFSET, offsetof(struct _lowcore, percpu_offset));
DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
DEFINE(__LC_PGM_TDB, offsetof(struct _lowcore, pgm_tdb));

30
arch/s390/kernel/entry.S
View file

@ -733,6 +733,14 @@ ENTRY(psw_idle)
stg %r3,__SF_EMPTY(%r15)
larl %r1,.Lpsw_idle_lpsw+4
stg %r1,__SF_EMPTY+8(%r15)
#ifdef CONFIG_SMP
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz .Lpsw_idle_stcctm
.insn rsy,0xeb0000000017,%r1,5,__SF_EMPTY+16(%r15)
.Lpsw_idle_stcctm:
#endif
STCK __CLOCK_IDLE_ENTER(%r2)
stpt __TIMER_IDLE_ENTER(%r2)
.Lpsw_idle_lpsw:
@ -1159,7 +1167,27 @@ cleanup_critical:
jhe 1f
mvc __CLOCK_IDLE_ENTER(8,%r2),__CLOCK_IDLE_EXIT(%r2)
mvc __TIMER_IDLE_ENTER(8,%r2),__TIMER_IDLE_EXIT(%r2)
1: # account system time going idle
1: # calculate idle cycles
#ifdef CONFIG_SMP
clg %r9,BASED(.Lcleanup_idle_insn)
jl 3f
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz 3f
.insn rsy,0xeb0000000017,%r1,5,__SF_EMPTY+80(%r15)
larl %r3,mt_cycles
ag %r3,__LC_PERCPU_OFFSET
la %r4,__SF_EMPTY+16(%r15)
2: lg %r0,0(%r3)
slg %r0,0(%r4)
alg %r0,64(%r4)
stg %r0,0(%r3)
la %r3,8(%r3)
la %r4,8(%r4)
brct %r1,2b
#endif
3: # account system time going idle
lg %r9,__LC_STEAL_TIMER
alg %r9,__CLOCK_IDLE_ENTER(%r2)
slg %r9,__LC_LAST_UPDATE_CLOCK

66
arch/s390/kernel/vtime.c
View file

@ -25,7 +25,7 @@ static DEFINE_SPINLOCK(virt_timer_lock);
static atomic64_t virt_timer_current;
static atomic64_t virt_timer_elapsed;
static DEFINE_PER_CPU(u64, mt_cycles[32]);
DEFINE_PER_CPU(u64, mt_cycles[8]);
static DEFINE_PER_CPU(u64, mt_scaling_mult) = { 1 };
static DEFINE_PER_CPU(u64, mt_scaling_div) = { 1 };
static DEFINE_PER_CPU(u64, mt_scaling_jiffies);
@ -60,6 +60,34 @@ static inline int virt_timer_forward(u64 elapsed)
return elapsed >= atomic64_read(&virt_timer_current);
}
static void update_mt_scaling(void)
{
u64 cycles_new[8], *cycles_old;
u64 delta, fac, mult, div;
int i;
stcctm5(smp_cpu_mtid + 1, cycles_new);
cycles_old = this_cpu_ptr(mt_cycles);
fac = 1;
mult = div = 0;
for (i = 0; i <= smp_cpu_mtid; i++) {
delta = cycles_new[i] - cycles_old[i];
div += delta;
mult *= i + 1;
mult += delta * fac;
fac *= i + 1;
}
div *= fac;
if (div > 0) {
/* Update scaling factor */
__this_cpu_write(mt_scaling_mult, mult);
__this_cpu_write(mt_scaling_div, div);
memcpy(cycles_old, cycles_new,
sizeof(u64) * (smp_cpu_mtid + 1));
}
__this_cpu_write(mt_scaling_jiffies, jiffies_64);
}
/*
* Update process times based on virtual cpu times stored by entry.S
* to the lowcore fields user_timer, system_timer & steal_clock.
@ -69,7 +97,6 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
struct thread_info *ti = task_thread_info(tsk);
u64 timer, clock, user, system, steal;
u64 user_scaled, system_scaled;
int i;
timer = S390_lowcore.last_update_timer;
clock = S390_lowcore.last_update_clock;
@ -85,34 +112,10 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset)
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
S390_lowcore.steal_timer += S390_lowcore.last_update_clock - clock;
/* Do MT utilization calculation */
/* Update MT utilization calculation */
if (smp_cpu_mtid &&
time_after64(jiffies_64, __this_cpu_read(mt_scaling_jiffies))) {
u64 cycles_new[32], *cycles_old;
u64 delta, fac, mult, div;
cycles_old = this_cpu_ptr(mt_cycles);
if (stcctm5(smp_cpu_mtid + 1, cycles_new) < 2) {
fac = 1;
mult = div = 0;
for (i = 0; i <= smp_cpu_mtid; i++) {
delta = cycles_new[i] - cycles_old[i];
div += delta;
mult *= i + 1;
mult += delta * fac;
fac *= i + 1;
}
div *= fac;
if (div > 0) {
/* Update scaling factor */
__this_cpu_write(mt_scaling_mult, mult);
__this_cpu_write(mt_scaling_div, div);
memcpy(cycles_old, cycles_new,
sizeof(u64) * (smp_cpu_mtid + 1));
}
}
__this_cpu_write(mt_scaling_jiffies, jiffies_64);
}
time_after64(jiffies_64, this_cpu_read(mt_scaling_jiffies)))
update_mt_scaling();
user = S390_lowcore.user_timer - ti->user_timer;
S390_lowcore.steal_timer -= user;
@ -181,6 +184,11 @@ void vtime_account_irq_enter(struct task_struct *tsk)
S390_lowcore.last_update_timer = get_vtimer();
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
/* Update MT utilization calculation */
if (smp_cpu_mtid &&
time_after64(jiffies_64, this_cpu_read(mt_scaling_jiffies)))
update_mt_scaling();
system = S390_lowcore.system_timer - ti->system_timer;
S390_lowcore.steal_timer -= system;
ti->system_timer = S390_lowcore.system_timer;

4
arch/s390/numa/mode_emu.c
View file

@ -368,7 +368,7 @@ static void topology_add_core(struct toptree *core)
cpumask_copy(&top->thread_mask, &core->mask);
cpumask_copy(&top->core_mask, &core_mc(core)->mask);
cpumask_copy(&top->book_mask, &core_book(core)->mask);
cpumask_set_cpu(cpu, node_to_cpumask_map[core_node(core)->id]);
cpumask_set_cpu(cpu, &node_to_cpumask_map[core_node(core)->id]);
top->node_id = core_node(core)->id;
}
}
@ -383,7 +383,7 @@ static void toptree_to_topology(struct toptree *numa)
/* Clear all node masks */
for (i = 0; i < MAX_NUMNODES; i++)
cpumask_clear(node_to_cpumask_map[i]);
cpumask_clear(&node_to_cpumask_map[i]);
/* Rebuild all masks */
toptree_for_each(core, numa, CORE)

4
arch/s390/numa/numa.c
View file

@ -23,7 +23,7 @@
pg_data_t *node_data[MAX_NUMNODES];
EXPORT_SYMBOL(node_data);
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
cpumask_t node_to_cpumask_map[MAX_NUMNODES];
EXPORT_SYMBOL(node_to_cpumask_map);
const struct numa_mode numa_mode_plain = {
@ -144,7 +144,7 @@ void __init numa_setup(void)
static int __init numa_init_early(void)
{
/* Attach all possible CPUs to node 0 for now. */
cpumask_copy(node_to_cpumask_map[0], cpu_possible_mask);
cpumask_copy(&node_to_cpumask_map[0], cpu_possible_mask);
return 0;
}
early_initcall(numa_init_early);

1
arch/score/include/asm/Kbuild
View file

@ -13,3 +13,4 @@ generic-y += sections.h
generic-y += trace_clock.h
generic-y += xor.h
generic-y += serial.h
generic-y += word-at-a-time.h

1
arch/sh/include/asm/page.h
View file

@ -59,6 +59,7 @@ pages_do_alias(unsigned long addr1, unsigned long addr2)
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, void *from);
#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE)
struct page;
struct vm_area_struct;

Some files were not shown because too many files have changed in this diff Show more