sky2: only bring up watchdog if link is active
This fixes the extra timer overhead that people were whining about as a 2.6.23 regression. Running the watchdog timer all the time is unneeded. Change it to run only if link is up, and reduce frequency to save power. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
b23457737f
commit
32c2c30085
2 changed files with 27 additions and 31 deletions
|
@ -99,10 +99,6 @@ static int disable_msi = 0;
|
|||
module_param(disable_msi, int, 0);
|
||||
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
|
||||
|
||||
static int idle_timeout = 100;
|
||||
module_param(idle_timeout, int, 0);
|
||||
MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
|
||||
|
||||
static const struct pci_device_id sky2_id_table[] = {
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
|
||||
|
@ -1624,6 +1620,9 @@ static int sky2_down(struct net_device *dev)
|
|||
if (netif_msg_ifdown(sky2))
|
||||
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
|
||||
|
||||
if (netif_carrier_ok(dev) && --hw->active == 0)
|
||||
del_timer(&hw->watchdog_timer);
|
||||
|
||||
/* Stop more packets from being queued */
|
||||
netif_stop_queue(dev);
|
||||
|
||||
|
@ -1744,6 +1743,10 @@ static void sky2_link_up(struct sky2_port *sky2)
|
|||
|
||||
netif_carrier_on(sky2->netdev);
|
||||
|
||||
if (hw->active++ == 0)
|
||||
mod_timer(&hw->watchdog_timer, jiffies + 1);
|
||||
|
||||
|
||||
/* Turn on link LED */
|
||||
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
|
||||
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
|
||||
|
@ -1795,6 +1798,11 @@ static void sky2_link_down(struct sky2_port *sky2)
|
|||
|
||||
netif_carrier_off(sky2->netdev);
|
||||
|
||||
/* Stop watchdog if both ports are not active */
|
||||
if (--hw->active == 0)
|
||||
del_timer(&hw->watchdog_timer);
|
||||
|
||||
|
||||
/* Turn on link LED */
|
||||
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
|
||||
|
||||
|
@ -2426,25 +2434,20 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port,
|
|||
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
|
||||
}
|
||||
|
||||
/* If idle then force a fake soft NAPI poll once a second
|
||||
* to work around cases where sharing an edge triggered interrupt.
|
||||
*/
|
||||
static inline void sky2_idle_start(struct sky2_hw *hw)
|
||||
{
|
||||
if (idle_timeout > 0)
|
||||
mod_timer(&hw->idle_timer,
|
||||
jiffies + msecs_to_jiffies(idle_timeout));
|
||||
}
|
||||
|
||||
static void sky2_idle(unsigned long arg)
|
||||
/* Check for lost IRQ once a second */
|
||||
static void sky2_watchdog(unsigned long arg)
|
||||
{
|
||||
struct sky2_hw *hw = (struct sky2_hw *) arg;
|
||||
struct net_device *dev = hw->dev[0];
|
||||
|
||||
if (__netif_rx_schedule_prep(dev))
|
||||
__netif_rx_schedule(dev);
|
||||
if (sky2_read32(hw, B0_ISRC)) {
|
||||
struct net_device *dev = hw->dev[0];
|
||||
|
||||
mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
|
||||
if (__netif_rx_schedule_prep(dev))
|
||||
__netif_rx_schedule(dev);
|
||||
}
|
||||
|
||||
if (hw->active > 0)
|
||||
mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
|
||||
}
|
||||
|
||||
/* Hardware/software error handling */
|
||||
|
@ -2732,8 +2735,6 @@ static void sky2_restart(struct work_struct *work)
|
|||
struct net_device *dev;
|
||||
int i, err;
|
||||
|
||||
del_timer_sync(&hw->idle_timer);
|
||||
|
||||
rtnl_lock();
|
||||
sky2_write32(hw, B0_IMSK, 0);
|
||||
sky2_read32(hw, B0_IMSK);
|
||||
|
@ -2762,8 +2763,6 @@ static void sky2_restart(struct work_struct *work)
|
|||
}
|
||||
}
|
||||
|
||||
sky2_idle_start(hw);
|
||||
|
||||
rtnl_unlock();
|
||||
}
|
||||
|
||||
|
@ -4030,11 +4029,9 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
|
|||
sky2_show_addr(dev1);
|
||||
}
|
||||
|
||||
setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
|
||||
setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
|
||||
INIT_WORK(&hw->restart_work, sky2_restart);
|
||||
|
||||
sky2_idle_start(hw);
|
||||
|
||||
pci_set_drvdata(pdev, hw);
|
||||
|
||||
return 0;
|
||||
|
@ -4069,7 +4066,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
|
|||
if (!hw)
|
||||
return;
|
||||
|
||||
del_timer_sync(&hw->idle_timer);
|
||||
del_timer_sync(&hw->watchdog_timer);
|
||||
|
||||
flush_scheduled_work();
|
||||
|
||||
|
@ -4113,7 +4110,6 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
|
|||
if (!hw)
|
||||
return 0;
|
||||
|
||||
del_timer_sync(&hw->idle_timer);
|
||||
netif_poll_disable(hw->dev[0]);
|
||||
|
||||
for (i = 0; i < hw->ports; i++) {
|
||||
|
@ -4179,7 +4175,7 @@ static int sky2_resume(struct pci_dev *pdev)
|
|||
}
|
||||
|
||||
netif_poll_enable(hw->dev[0]);
|
||||
sky2_idle_start(hw);
|
||||
|
||||
return 0;
|
||||
out:
|
||||
dev_err(&pdev->dev, "resume failed (%d)\n", err);
|
||||
|
@ -4196,7 +4192,6 @@ static void sky2_shutdown(struct pci_dev *pdev)
|
|||
if (!hw)
|
||||
return;
|
||||
|
||||
del_timer_sync(&hw->idle_timer);
|
||||
netif_poll_disable(hw->dev[0]);
|
||||
|
||||
for (i = 0; i < hw->ports; i++) {
|
||||
|
|
|
@ -2045,12 +2045,13 @@ struct sky2_hw {
|
|||
u8 chip_rev;
|
||||
u8 pmd_type;
|
||||
u8 ports;
|
||||
u8 active;
|
||||
|
||||
struct sky2_status_le *st_le;
|
||||
u32 st_idx;
|
||||
dma_addr_t st_dma;
|
||||
|
||||
struct timer_list idle_timer;
|
||||
struct timer_list watchdog_timer;
|
||||
struct work_struct restart_work;
|
||||
int msi;
|
||||
wait_queue_head_t msi_wait;
|
||||
|
|
Loading…
Reference in a new issue