[PATCH] USB: Add isp116x-hcd USB host controller driver
This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Olav Kongas
Greg Kroah-Hartman
parent
313980c927
commit
4808a1c026
6 changed files with 2527 additions and 0 deletions
|
|
@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/
|
|||
obj-$(CONFIG_USB_MON) += mon/
|
||||
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += host/
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_UHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_SL811_HCD) += host/
|
||||
|
|
|
|||
|
|
@ -49,6 +49,19 @@ config USB_EHCI_ROOT_HUB_TT
|
|||
|
||||
This supports the EHCI implementation from TransDimension Inc.
|
||||
|
||||
config USB_ISP116X_HCD
|
||||
tristate "ISP116X HCD support"
|
||||
depends on USB
|
||||
default N
|
||||
---help---
|
||||
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
|
||||
option if your board has this chip. If unsure, say N.
|
||||
|
||||
This driver does not support isochronous transfers.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called isp116x-hcd.
|
||||
|
||||
config USB_OHCI_HCD
|
||||
tristate "OHCI HCD support"
|
||||
depends on USB && USB_ARCH_HAS_OHCI
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
#
|
||||
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
||||
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
|
||||
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
|
||||
|
|
|
|||
1882
drivers/usb/host/isp116x-hcd.c
Normal file
1882
drivers/usb/host/isp116x-hcd.c
Normal file
File diff suppressed because it is too large
Load diff
583
drivers/usb/host/isp116x.h
Normal file
583
drivers/usb/host/isp116x.h
Normal file
|
|
@ -0,0 +1,583 @@
|
|||
/*
|
||||
* ISP116x register declarations and HCD data structures
|
||||
*
|
||||
* Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
|
||||
* Portions:
|
||||
* Copyright (C) 2004 Lothar Wassmann
|
||||
* Copyright (C) 2004 Psion Teklogix
|
||||
* Copyright (C) 2004 David Brownell
|
||||
*/
|
||||
|
||||
/* us of 1ms frame */
|
||||
#define MAX_LOAD_LIMIT 850
|
||||
|
||||
/* Full speed: max # of bytes to transfer for a single urb
|
||||
at a time must be < 1024 && must be multiple of 64.
|
||||
832 allows transfering 4kiB within 5 frames. */
|
||||
#define MAX_TRANSFER_SIZE_FULLSPEED 832
|
||||
|
||||
/* Low speed: there is no reason to schedule in very big
|
||||
chunks; often the requested long transfers are for
|
||||
string descriptors containing short strings. */
|
||||
#define MAX_TRANSFER_SIZE_LOWSPEED 64
|
||||
|
||||
/* Bytetime (us), a rough indication of how much time it
|
||||
would take to transfer a byte of useful data over USB */
|
||||
#define BYTE_TIME_FULLSPEED 1
|
||||
#define BYTE_TIME_LOWSPEED 20
|
||||
|
||||
/* Buffer sizes */
|
||||
#define ISP116x_BUF_SIZE 4096
|
||||
#define ISP116x_ITL_BUFSIZE 0
|
||||
#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
|
||||
|
||||
#define ISP116x_WRITE_OFFSET 0x80
|
||||
|
||||
/*------------ ISP116x registers/bits ------------*/
|
||||
#define HCREVISION 0x00
|
||||
#define HCCONTROL 0x01
|
||||
#define HCCONTROL_HCFS (3 << 6) /* host controller
|
||||
functional state */
|
||||
#define HCCONTROL_USB_RESET (0 << 6)
|
||||
#define HCCONTROL_USB_RESUME (1 << 6)
|
||||
#define HCCONTROL_USB_OPER (2 << 6)
|
||||
#define HCCONTROL_USB_SUSPEND (3 << 6)
|
||||
#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */
|
||||
#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */
|
||||
#define HCCMDSTAT 0x02
|
||||
#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */
|
||||
#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */
|
||||
#define HCINTSTAT 0x03
|
||||
#define HCINT_SO (1 << 0) /* scheduling overrun */
|
||||
#define HCINT_WDH (1 << 1) /* writeback of done_head */
|
||||
#define HCINT_SF (1 << 2) /* start frame */
|
||||
#define HCINT_RD (1 << 3) /* resume detect */
|
||||
#define HCINT_UE (1 << 4) /* unrecoverable error */
|
||||
#define HCINT_FNO (1 << 5) /* frame number overflow */
|
||||
#define HCINT_RHSC (1 << 6) /* root hub status change */
|
||||
#define HCINT_OC (1 << 30) /* ownership change */
|
||||
#define HCINT_MIE (1 << 31) /* master interrupt enable */
|
||||
#define HCINTENB 0x04
|
||||
#define HCINTDIS 0x05
|
||||
#define HCFMINTVL 0x0d
|
||||
#define HCFMREM 0x0e
|
||||
#define HCFMNUM 0x0f
|
||||
#define HCLSTHRESH 0x11
|
||||
#define HCRHDESCA 0x12
|
||||
#define RH_A_NDP (0x3 << 0) /* # downstream ports */
|
||||
#define RH_A_PSM (1 << 8) /* power switching mode */
|
||||
#define RH_A_NPS (1 << 9) /* no power switching */
|
||||
#define RH_A_DT (1 << 10) /* device type (mbz) */
|
||||
#define RH_A_OCPM (1 << 11) /* overcurrent protection
|
||||
mode */
|
||||
#define RH_A_NOCP (1 << 12) /* no overcurrent protection */
|
||||
#define RH_A_POTPGT (0xff << 24) /* power on -> power good
|
||||
time */
|
||||
#define HCRHDESCB 0x13
|
||||
#define RH_B_DR (0xffff << 0) /* device removable flags */
|
||||
#define RH_B_PPCM (0xffff << 16) /* port power control mask */
|
||||
#define HCRHSTATUS 0x14
|
||||
#define RH_HS_LPS (1 << 0) /* local power status */
|
||||
#define RH_HS_OCI (1 << 1) /* over current indicator */
|
||||
#define RH_HS_DRWE (1 << 15) /* device remote wakeup
|
||||
enable */
|
||||
#define RH_HS_LPSC (1 << 16) /* local power status change */
|
||||
#define RH_HS_OCIC (1 << 17) /* over current indicator
|
||||
change */
|
||||
#define RH_HS_CRWE (1 << 31) /* clear remote wakeup
|
||||
enable */
|
||||
#define HCRHPORT1 0x15
|
||||
#define RH_PS_CCS (1 << 0) /* current connect status */
|
||||
#define RH_PS_PES (1 << 1) /* port enable status */
|
||||
#define RH_PS_PSS (1 << 2) /* port suspend status */
|
||||
#define RH_PS_POCI (1 << 3) /* port over current
|
||||
indicator */
|
||||
#define RH_PS_PRS (1 << 4) /* port reset status */
|
||||
#define RH_PS_PPS (1 << 8) /* port power status */
|
||||
#define RH_PS_LSDA (1 << 9) /* low speed device attached */
|
||||
#define RH_PS_CSC (1 << 16) /* connect status change */
|
||||
#define RH_PS_PESC (1 << 17) /* port enable status change */
|
||||
#define RH_PS_PSSC (1 << 18) /* port suspend status
|
||||
change */
|
||||
#define RH_PS_OCIC (1 << 19) /* over current indicator
|
||||
change */
|
||||
#define RH_PS_PRSC (1 << 20) /* port reset status change */
|
||||
#define HCRHPORT_CLRMASK (0x1f << 16)
|
||||
#define HCRHPORT2 0x16
|
||||
#define HCHWCFG 0x20
|
||||
#define HCHWCFG_15KRSEL (1 << 12)
|
||||
#define HCHWCFG_CLKNOTSTOP (1 << 11)
|
||||
#define HCHWCFG_ANALOG_OC (1 << 10)
|
||||
#define HCHWCFG_DACK_MODE (1 << 8)
|
||||
#define HCHWCFG_EOT_POL (1 << 7)
|
||||
#define HCHWCFG_DACK_POL (1 << 6)
|
||||
#define HCHWCFG_DREQ_POL (1 << 5)
|
||||
#define HCHWCFG_DBWIDTH_MASK (0x03 << 3)
|
||||
#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK)
|
||||
#define HCHWCFG_INT_POL (1 << 2)
|
||||
#define HCHWCFG_INT_TRIGGER (1 << 1)
|
||||
#define HCHWCFG_INT_ENABLE (1 << 0)
|
||||
#define HCDMACFG 0x21
|
||||
#define HCDMACFG_BURST_LEN_MASK (0x03 << 5)
|
||||
#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK)
|
||||
#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0)
|
||||
#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1)
|
||||
#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2)
|
||||
#define HCDMACFG_DMA_ENABLE (1 << 4)
|
||||
#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1)
|
||||
#define HCDMACFG_CTR_SEL (1 << 2)
|
||||
#define HCDMACFG_ITLATL_SEL (1 << 1)
|
||||
#define HCDMACFG_DMA_RW_SELECT (1 << 0)
|
||||
#define HCXFERCTR 0x22
|
||||
#define HCuPINT 0x24
|
||||
#define HCuPINT_SOF (1 << 0)
|
||||
#define HCuPINT_ATL (1 << 1)
|
||||
#define HCuPINT_AIIEOT (1 << 2)
|
||||
#define HCuPINT_OPR (1 << 4)
|
||||
#define HCuPINT_SUSP (1 << 5)
|
||||
#define HCuPINT_CLKRDY (1 << 6)
|
||||
#define HCuPINTENB 0x25
|
||||
#define HCCHIPID 0x27
|
||||
#define HCCHIPID_MASK 0xff00
|
||||
#define HCCHIPID_MAGIC 0x6100
|
||||
#define HCSCRATCH 0x28
|
||||
#define HCSWRES 0x29
|
||||
#define HCSWRES_MAGIC 0x00f6
|
||||
#define HCITLBUFLEN 0x2a
|
||||
#define HCATLBUFLEN 0x2b
|
||||
#define HCBUFSTAT 0x2c
|
||||
#define HCBUFSTAT_ITL0_FULL (1 << 0)
|
||||
#define HCBUFSTAT_ITL1_FULL (1 << 1)
|
||||
#define HCBUFSTAT_ATL_FULL (1 << 2)
|
||||
#define HCBUFSTAT_ITL0_DONE (1 << 3)
|
||||
#define HCBUFSTAT_ITL1_DONE (1 << 4)
|
||||
#define HCBUFSTAT_ATL_DONE (1 << 5)
|
||||
#define HCRDITL0LEN 0x2d
|
||||
#define HCRDITL1LEN 0x2e
|
||||
#define HCITLPORT 0x40
|
||||
#define HCATLPORT 0x41
|
||||
|
||||
/* Philips transfer descriptor */
|
||||
struct ptd {
|
||||
u16 count;
|
||||
#define PTD_COUNT_MSK (0x3ff << 0)
|
||||
#define PTD_TOGGLE_MSK (1 << 10)
|
||||
#define PTD_ACTIVE_MSK (1 << 11)
|
||||
#define PTD_CC_MSK (0xf << 12)
|
||||
u16 mps;
|
||||
#define PTD_MPS_MSK (0x3ff << 0)
|
||||
#define PTD_SPD_MSK (1 << 10)
|
||||
#define PTD_LAST_MSK (1 << 11)
|
||||
#define PTD_EP_MSK (0xf << 12)
|
||||
u16 len;
|
||||
#define PTD_LEN_MSK (0x3ff << 0)
|
||||
#define PTD_DIR_MSK (3 << 10)
|
||||
#define PTD_DIR_SETUP (0)
|
||||
#define PTD_DIR_OUT (1)
|
||||
#define PTD_DIR_IN (2)
|
||||
#define PTD_B5_5_MSK (1 << 13)
|
||||
u16 faddr;
|
||||
#define PTD_FA_MSK (0x7f << 0)
|
||||
#define PTD_FMT_MSK (1 << 7)
|
||||
} __attribute__ ((packed, aligned(2)));
|
||||
|
||||
/* PTD accessor macros. */
|
||||
#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0)
|
||||
#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK)
|
||||
#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10)
|
||||
#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK)
|
||||
#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11)
|
||||
#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK)
|
||||
#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12)
|
||||
#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK)
|
||||
#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0)
|
||||
#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK)
|
||||
#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10)
|
||||
#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK)
|
||||
#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11)
|
||||
#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK)
|
||||
#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12)
|
||||
#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK)
|
||||
#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0)
|
||||
#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK)
|
||||
#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10)
|
||||
#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK)
|
||||
#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13)
|
||||
#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK)
|
||||
#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0)
|
||||
#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK)
|
||||
#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7)
|
||||
#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK)
|
||||
|
||||
/* Hardware transfer status codes -- CC from ptd->count */
|
||||
#define TD_CC_NOERROR 0x00
|
||||
#define TD_CC_CRC 0x01
|
||||
#define TD_CC_BITSTUFFING 0x02
|
||||
#define TD_CC_DATATOGGLEM 0x03
|
||||
#define TD_CC_STALL 0x04
|
||||
#define TD_DEVNOTRESP 0x05
|
||||
#define TD_PIDCHECKFAIL 0x06
|
||||
#define TD_UNEXPECTEDPID 0x07
|
||||
#define TD_DATAOVERRUN 0x08
|
||||
#define TD_DATAUNDERRUN 0x09
|
||||
/* 0x0A, 0x0B reserved for hardware */
|
||||
#define TD_BUFFEROVERRUN 0x0C
|
||||
#define TD_BUFFERUNDERRUN 0x0D
|
||||
/* 0x0E, 0x0F reserved for HCD */
|
||||
#define TD_NOTACCESSED 0x0F
|
||||
|
||||
/* map PTD status codes (CC) to errno values */
|
||||
static const int cc_to_error[16] = {
|
||||
/* No Error */ 0,
|
||||
/* CRC Error */ -EILSEQ,
|
||||
/* Bit Stuff */ -EPROTO,
|
||||
/* Data Togg */ -EILSEQ,
|
||||
/* Stall */ -EPIPE,
|
||||
/* DevNotResp */ -ETIMEDOUT,
|
||||
/* PIDCheck */ -EPROTO,
|
||||
/* UnExpPID */ -EPROTO,
|
||||
/* DataOver */ -EOVERFLOW,
|
||||
/* DataUnder */ -EREMOTEIO,
|
||||
/* (for hw) */ -EIO,
|
||||
/* (for hw) */ -EIO,
|
||||
/* BufferOver */ -ECOMM,
|
||||
/* BuffUnder */ -ENOSR,
|
||||
/* (for HCD) */ -EALREADY,
|
||||
/* (for HCD) */ -EALREADY
|
||||
};
|
||||
|
||||
/*--------------------------------------------------------------*/
|
||||
|
||||
#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
|
||||
#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
|
||||
|
||||
struct isp116x {
|
||||
spinlock_t lock;
|
||||
struct work_struct rh_resume;
|
||||
|
||||
void __iomem *addr_reg;
|
||||
void __iomem *data_reg;
|
||||
|
||||
struct isp116x_platform_data *board;
|
||||
|
||||
struct proc_dir_entry *pde;
|
||||
unsigned long stat1, stat2, stat4, stat8, stat16;
|
||||
|
||||
/* HC registers */
|
||||
u32 intenb; /* "OHCI" interrupts */
|
||||
u16 irqenb; /* uP interrupts */
|
||||
|
||||
/* Root hub registers */
|
||||
u32 rhdesca;
|
||||
u32 rhdescb;
|
||||
u32 rhstatus;
|
||||
u32 rhport[2];
|
||||
|
||||
/* async schedule: control, bulk */
|
||||
struct list_head async;
|
||||
|
||||
/* periodic schedule: int */
|
||||
u16 load[PERIODIC_SIZE];
|
||||
struct isp116x_ep *periodic[PERIODIC_SIZE];
|
||||
unsigned periodic_count;
|
||||
u16 fmindex;
|
||||
|
||||
/* Schedule for the current frame */
|
||||
struct isp116x_ep *atl_active;
|
||||
int atl_buflen;
|
||||
int atl_bufshrt;
|
||||
int atl_last_dir;
|
||||
atomic_t atl_finishing;
|
||||
};
|
||||
|
||||
static inline struct isp116x *hcd_to_isp116x(struct usb_hcd *hcd)
|
||||
{
|
||||
return (struct isp116x *)(hcd->hcd_priv);
|
||||
}
|
||||
|
||||
static inline struct usb_hcd *isp116x_to_hcd(struct isp116x *isp116x)
|
||||
{
|
||||
return container_of((void *)isp116x, struct usb_hcd, hcd_priv);
|
||||
}
|
||||
|
||||
struct isp116x_ep {
|
||||
struct usb_host_endpoint *hep;
|
||||
struct usb_device *udev;
|
||||
struct ptd ptd;
|
||||
|
||||
u8 maxpacket;
|
||||
u8 epnum;
|
||||
u8 nextpid;
|
||||
u16 error_count;
|
||||
u16 length; /* of current packet */
|
||||
unsigned char *data; /* to databuf */
|
||||
/* queue of active EP's (the ones scheduled for the
|
||||
current frame) */
|
||||
struct isp116x_ep *active;
|
||||
|
||||
/* periodic schedule */
|
||||
u16 period;
|
||||
u16 branch;
|
||||
u16 load;
|
||||
struct isp116x_ep *next;
|
||||
|
||||
/* async schedule */
|
||||
struct list_head schedule;
|
||||
};
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DBG(stuff...) printk(KERN_DEBUG "116x: " stuff)
|
||||
#else
|
||||
#define DBG(stuff...) do{}while(0)
|
||||
#endif
|
||||
|
||||
#ifdef VERBOSE
|
||||
# define VDBG DBG
|
||||
#else
|
||||
# define VDBG(stuff...) do{}while(0)
|
||||
#endif
|
||||
|
||||
#define ERR(stuff...) printk(KERN_ERR "116x: " stuff)
|
||||
#define WARN(stuff...) printk(KERN_WARNING "116x: " stuff)
|
||||
#define INFO(stuff...) printk(KERN_INFO "116x: " stuff)
|
||||
|
||||
/* ------------------------------------------------- */
|
||||
|
||||
#if defined(USE_PLATFORM_DELAY)
|
||||
#if defined(USE_NDELAY)
|
||||
#error USE_PLATFORM_DELAY and USE_NDELAY simultaneously defined.
|
||||
#endif
|
||||
#define isp116x_delay(h,d) (h)->board->delay( \
|
||||
isp116x_to_hcd(h)->self.controller,d)
|
||||
#define isp116x_check_platform_delay(h) ((h)->board->delay == NULL)
|
||||
#elif defined(USE_NDELAY)
|
||||
#define isp116x_delay(h,d) ndelay(d)
|
||||
#define isp116x_check_platform_delay(h) 0
|
||||
#else
|
||||
#define isp116x_delay(h,d) do{}while(0)
|
||||
#define isp116x_check_platform_delay(h) 0
|
||||
#endif
|
||||
|
||||
#if defined(DEBUG)
|
||||
#define IRQ_TEST() BUG_ON(!irqs_disabled())
|
||||
#else
|
||||
#define IRQ_TEST() do{}while(0)
|
||||
#endif
|
||||
|
||||
static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
|
||||
{
|
||||
IRQ_TEST();
|
||||
writew(reg & 0xff, isp116x->addr_reg);
|
||||
isp116x_delay(isp116x, 300);
|
||||
}
|
||||
|
||||
static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
|
||||
{
|
||||
writew(val, isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
}
|
||||
|
||||
static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
|
||||
{
|
||||
__raw_writew(val, isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
}
|
||||
|
||||
static inline u16 isp116x_read_data16(struct isp116x *isp116x)
|
||||
{
|
||||
u16 val;
|
||||
|
||||
val = readw(isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
return val;
|
||||
}
|
||||
|
||||
static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
|
||||
{
|
||||
u16 val;
|
||||
|
||||
val = __raw_readw(isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
return val;
|
||||
}
|
||||
|
||||
static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
|
||||
{
|
||||
writew(val & 0xffff, isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
writew(val >> 16, isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
}
|
||||
|
||||
static inline u32 isp116x_read_data32(struct isp116x *isp116x)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = (u32) readw(isp116x->data_reg);
|
||||
isp116x_delay(isp116x, 150);
|
||||
val |= ((u32) readw(isp116x->data_reg)) << 16;
|
||||
isp116x_delay(isp116x, 150);
|
||||
return val;
|
||||
}
|
||||
|
||||
/* Let's keep register access functions out of line. Hint:
|
||||
we wait at least 150 ns at every access.
|
||||
*/
|
||||
static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
|
||||
{
|
||||
isp116x_write_addr(isp116x, reg);
|
||||
return isp116x_read_data16(isp116x);
|
||||
}
|
||||
|
||||
static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
|
||||
{
|
||||
isp116x_write_addr(isp116x, reg);
|
||||
return isp116x_read_data32(isp116x);
|
||||
}
|
||||
|
||||
static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
|
||||
unsigned val)
|
||||
{
|
||||
isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
|
||||
isp116x_write_data16(isp116x, (u16) (val & 0xffff));
|
||||
}
|
||||
|
||||
static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
|
||||
unsigned val)
|
||||
{
|
||||
isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
|
||||
isp116x_write_data32(isp116x, (u32) val);
|
||||
}
|
||||
|
||||
#define isp116x_show_reg(d,r) { \
|
||||
if ((r) < 0x20) { \
|
||||
DBG("%-12s[%02x]: %08x\n", #r, \
|
||||
r, isp116x_read_reg32(d, r)); \
|
||||
} else { \
|
||||
DBG("%-12s[%02x]: %04x\n", #r, \
|
||||
r, isp116x_read_reg16(d, r)); \
|
||||
} \
|
||||
}
|
||||
|
||||
static inline void isp116x_show_regs(struct isp116x *isp116x)
|
||||
{
|
||||
isp116x_show_reg(isp116x, HCREVISION);
|
||||
isp116x_show_reg(isp116x, HCCONTROL);
|
||||
isp116x_show_reg(isp116x, HCCMDSTAT);
|
||||
isp116x_show_reg(isp116x, HCINTSTAT);
|
||||
isp116x_show_reg(isp116x, HCINTENB);
|
||||
isp116x_show_reg(isp116x, HCFMINTVL);
|
||||
isp116x_show_reg(isp116x, HCFMREM);
|
||||
isp116x_show_reg(isp116x, HCFMNUM);
|
||||
isp116x_show_reg(isp116x, HCLSTHRESH);
|
||||
isp116x_show_reg(isp116x, HCRHDESCA);
|
||||
isp116x_show_reg(isp116x, HCRHDESCB);
|
||||
isp116x_show_reg(isp116x, HCRHSTATUS);
|
||||
isp116x_show_reg(isp116x, HCRHPORT1);
|
||||
isp116x_show_reg(isp116x, HCRHPORT2);
|
||||
isp116x_show_reg(isp116x, HCHWCFG);
|
||||
isp116x_show_reg(isp116x, HCDMACFG);
|
||||
isp116x_show_reg(isp116x, HCXFERCTR);
|
||||
isp116x_show_reg(isp116x, HCuPINT);
|
||||
isp116x_show_reg(isp116x, HCuPINTENB);
|
||||
isp116x_show_reg(isp116x, HCCHIPID);
|
||||
isp116x_show_reg(isp116x, HCSCRATCH);
|
||||
isp116x_show_reg(isp116x, HCITLBUFLEN);
|
||||
isp116x_show_reg(isp116x, HCATLBUFLEN);
|
||||
isp116x_show_reg(isp116x, HCBUFSTAT);
|
||||
isp116x_show_reg(isp116x, HCRDITL0LEN);
|
||||
isp116x_show_reg(isp116x, HCRDITL1LEN);
|
||||
}
|
||||
|
||||
#if defined(URB_TRACE)
|
||||
|
||||
#define PIPETYPE(pipe) ({ char *__s; \
|
||||
if (usb_pipecontrol(pipe)) __s = "ctrl"; \
|
||||
else if (usb_pipeint(pipe)) __s = "int"; \
|
||||
else if (usb_pipebulk(pipe)) __s = "bulk"; \
|
||||
else __s = "iso"; \
|
||||
__s;})
|
||||
#define PIPEDIR(pipe) ({ usb_pipein(pipe) ? "in" : "out"; })
|
||||
#define URB_NOTSHORT(urb) ({ (urb)->transfer_flags & URB_SHORT_NOT_OK ? \
|
||||
"short_not_ok" : ""; })
|
||||
|
||||
/* print debug info about the URB */
|
||||
static void urb_dbg(struct urb *urb, char *msg)
|
||||
{
|
||||
unsigned int pipe;
|
||||
|
||||
if (!urb) {
|
||||
DBG("%s: zero urb\n", msg);
|
||||
return;
|
||||
}
|
||||
pipe = urb->pipe;
|
||||
DBG("%s: FA %d ep%d%s %s: len %d/%d %s\n", msg,
|
||||
usb_pipedevice(pipe), usb_pipeendpoint(pipe),
|
||||
PIPEDIR(pipe), PIPETYPE(pipe),
|
||||
urb->transfer_buffer_length, urb->actual_length, URB_NOTSHORT(urb));
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
#define urb_dbg(urb,msg) do{}while(0)
|
||||
|
||||
#endif /* ! defined(URB_TRACE) */
|
||||
|
||||
#if defined(PTD_TRACE)
|
||||
|
||||
#define PTD_DIR_STR(ptd) ({char __c; \
|
||||
switch(PTD_GET_DIR(ptd)){ \
|
||||
case 0: __c = 's'; break; \
|
||||
case 1: __c = 'o'; break; \
|
||||
default: __c = 'i'; break; \
|
||||
}; __c;})
|
||||
|
||||
/*
|
||||
Dump PTD info. The code documents the format
|
||||
perfectly, right :)
|
||||
*/
|
||||
static inline void dump_ptd(struct ptd *ptd)
|
||||
{
|
||||
printk("td: %x %d%c%d %d,%d,%d %x %x%x%x\n",
|
||||
PTD_GET_CC(ptd), PTD_GET_FA(ptd),
|
||||
PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
|
||||
PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
|
||||
PTD_GET_TOGGLE(ptd), PTD_GET_ACTIVE(ptd),
|
||||
PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
|
||||
}
|
||||
|
||||
static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf)
|
||||
{
|
||||
int k;
|
||||
|
||||
if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) {
|
||||
printk("-> ");
|
||||
for (k = 0; k < PTD_GET_LEN(ptd); ++k)
|
||||
printk("%02x ", ((u8 *) buf)[k]);
|
||||
printk("\n");
|
||||
}
|
||||
}
|
||||
|
||||
static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf)
|
||||
{
|
||||
int k;
|
||||
|
||||
if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) {
|
||||
printk("<- ");
|
||||
for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
|
||||
printk("%02x ", ((u8 *) buf)[k]);
|
||||
printk("\n");
|
||||
}
|
||||
if (PTD_GET_LAST(ptd))
|
||||
printk("-\n");
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
#define dump_ptd(ptd) do{}while(0)
|
||||
#define dump_ptd_in_data(ptd,buf) do{}while(0)
|
||||
#define dump_ptd_out_data(ptd,buf) do{}while(0)
|
||||
|
||||
#endif /* ! defined(PTD_TRACE) */
|
||||
47
include/linux/usb_isp116x.h
Normal file
47
include/linux/usb_isp116x.h
Normal file
|
|
@ -0,0 +1,47 @@
|
|||
|
||||
/*
|
||||
* Board initialization code should put one of these into dev->platform_data
|
||||
* and place the isp116x onto platform_bus.
|
||||
*/
|
||||
|
||||
struct isp116x_platform_data {
|
||||
/* Enable internal resistors on downstream ports */
|
||||
unsigned sel15Kres:1;
|
||||
/* Chip's internal clock won't be stopped in suspended state.
|
||||
Setting/unsetting this bit takes effect only if
|
||||
'remote_wakeup_enable' below is not set. */
|
||||
unsigned clknotstop:1;
|
||||
/* On-chip overcurrent protection */
|
||||
unsigned oc_enable:1;
|
||||
/* INT output polarity */
|
||||
unsigned int_act_high:1;
|
||||
/* INT edge or level triggered */
|
||||
unsigned int_edge_triggered:1;
|
||||
/* WAKEUP pin connected - NOT SUPPORTED */
|
||||
/* unsigned remote_wakeup_connected:1; */
|
||||
/* Wakeup by devices on usb bus enabled */
|
||||
unsigned remote_wakeup_enable:1;
|
||||
/* Switch or not to switch (keep always powered) */
|
||||
unsigned no_power_switching:1;
|
||||
/* Ganged port power switching (0) or individual port
|
||||
power switching (1) */
|
||||
unsigned power_switching_mode:1;
|
||||
/* Given port_power, msec/2 after power on till power good */
|
||||
u8 potpg;
|
||||
/* Hardware reset set/clear. If implemented, this function must:
|
||||
if set == 0, deassert chip's HW reset pin
|
||||
otherwise, assert chip's HW reset pin */
|
||||
void (*reset) (struct device * dev, int set);
|
||||
/* Hardware clock start/stop. If implemented, this function must:
|
||||
if start == 0, stop the external clock
|
||||
otherwise, start the external clock
|
||||
*/
|
||||
void (*clock) (struct device * dev, int start);
|
||||
/* Inter-io delay (ns). The chip is picky about access timings; it
|
||||
expects at least:
|
||||
150ns delay between consecutive accesses to DATA_REG,
|
||||
300ns delay between access to ADDR_REG and DATA_REG
|
||||
OE, WE MUST NOT be changed during these intervals
|
||||
*/
|
||||
void (*delay) (struct device * dev, int delay);
|
||||
};
|
||||
Loading…
Reference in a new issue