[PATCH] sh: SH4-202 microdev updates
A few trivial updates for the microdev board support code: - Update for __IO_PREFIX changes. - Consolidate headers into a single microdev.h. - Update the microdev_defconfig. - Add init values for the S1D13806 used by s1d13xxxfb. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Paul Mundt
Linus Torvalds
parent
4a41cdf978
commit
740172947b
6 changed files with 538 additions and 349 deletions
|
|
@ -16,7 +16,7 @@
|
|||
#include <linux/pci.h>
|
||||
#include <linux/wait.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mach/io.h>
|
||||
#include <asm/microdev.h>
|
||||
|
||||
/*
|
||||
* we need to have a 'safe' address to re-direct all I/O requests
|
||||
|
|
@ -52,8 +52,90 @@
|
|||
#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
|
||||
#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
|
||||
|
||||
#define PORT2ADDR(x) (microdev_isa_port2addr(x))
|
||||
/*
|
||||
* map I/O ports to memory-mapped addresses
|
||||
*/
|
||||
static unsigned long microdev_isa_port2addr(unsigned long offset)
|
||||
{
|
||||
unsigned long result;
|
||||
|
||||
if ((offset >= IO_LAN91C111_BASE) &&
|
||||
(offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
|
||||
/*
|
||||
* SMSC LAN91C111 Ethernet chip
|
||||
*/
|
||||
result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
|
||||
} else if ((offset >= IO_SUPERIO_BASE) &&
|
||||
(offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Configuration Registers
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
#if 0
|
||||
} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
|
||||
offset == KBD_STATUS_REG) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
#endif
|
||||
} else if (((offset >= IO_IDE1_BASE) &&
|
||||
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
|
||||
(offset == IO_IDE1_MISC)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* IDE #1
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if (((offset >= IO_IDE2_BASE) &&
|
||||
(offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
|
||||
(offset == IO_IDE2_MISC)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* IDE #2
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_SERIAL1_BASE) &&
|
||||
(offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Serial #1
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_SERIAL2_BASE) &&
|
||||
(offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Serial #2
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_ISP1161_BASE) &&
|
||||
(offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
|
||||
/*
|
||||
* Philips USB ISP1161x chip
|
||||
*/
|
||||
result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
|
||||
} else {
|
||||
/*
|
||||
* safe default.
|
||||
*/
|
||||
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
|
||||
__FUNCTION__, offset);
|
||||
result = PVR;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
#define PORT2ADDR(x) (microdev_isa_port2addr(x))
|
||||
|
||||
static inline void delay(void)
|
||||
{
|
||||
|
|
@ -94,6 +176,17 @@ unsigned int microdev_inl(unsigned long port)
|
|||
return *(volatile unsigned int*)PORT2ADDR(port);
|
||||
}
|
||||
|
||||
void microdev_outw(unsigned short b, unsigned long port)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
if (port >= PCIBIOS_MIN_IO) {
|
||||
microdev_pci_outw(b, port);
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
*(volatile unsigned short*)PORT2ADDR(port) = b;
|
||||
}
|
||||
|
||||
void microdev_outb(unsigned char b, unsigned long port)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
|
|
@ -158,17 +251,6 @@ void microdev_outb(unsigned char b, unsigned long port)
|
|||
}
|
||||
}
|
||||
|
||||
void microdev_outw(unsigned short b, unsigned long port)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
if (port >= PCIBIOS_MIN_IO) {
|
||||
microdev_pci_outw(b, port);
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
*(volatile unsigned short*)PORT2ADDR(port) = b;
|
||||
}
|
||||
|
||||
void microdev_outl(unsigned int b, unsigned long port)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
|
|
@ -284,87 +366,3 @@ void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
|
|||
while (count--)
|
||||
*port_addr = *buf++;
|
||||
}
|
||||
|
||||
/*
|
||||
* map I/O ports to memory-mapped addresses
|
||||
*/
|
||||
unsigned long microdev_isa_port2addr(unsigned long offset)
|
||||
{
|
||||
unsigned long result;
|
||||
|
||||
if ((offset >= IO_LAN91C111_BASE) &&
|
||||
(offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
|
||||
/*
|
||||
* SMSC LAN91C111 Ethernet chip
|
||||
*/
|
||||
result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
|
||||
} else if ((offset >= IO_SUPERIO_BASE) &&
|
||||
(offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Configuration Registers
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
#if 0
|
||||
} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
|
||||
offset == KBD_STATUS_REG) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
#endif
|
||||
} else if (((offset >= IO_IDE1_BASE) &&
|
||||
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
|
||||
(offset == IO_IDE1_MISC)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* IDE #1
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if (((offset >= IO_IDE2_BASE) &&
|
||||
(offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
|
||||
(offset == IO_IDE2_MISC)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* IDE #2
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_SERIAL1_BASE) &&
|
||||
(offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Serial #1
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_SERIAL2_BASE) &&
|
||||
(offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
|
||||
/*
|
||||
* SMSC FDC37C93xAPM SuperIO chip
|
||||
*
|
||||
* Serial #2
|
||||
*/
|
||||
result = IO_SUPERIO_PHYS + (offset << 1);
|
||||
} else if ((offset >= IO_ISP1161_BASE) &&
|
||||
(offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
|
||||
/*
|
||||
* Philips USB ISP1161x chip
|
||||
*/
|
||||
result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
|
||||
} else {
|
||||
/*
|
||||
* safe default.
|
||||
*/
|
||||
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
|
||||
__FUNCTION__, offset);
|
||||
result = PVR;
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -15,7 +15,7 @@
|
|||
|
||||
#include <asm/system.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/microdev.h>
|
||||
|
||||
#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
|
||||
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
*
|
||||
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
|
||||
* Copyright (C) 2003, 2004 SuperH, Inc.
|
||||
* Copyright (C) 2004 Paul Mundt
|
||||
* Copyright (C) 2004, 2005 Paul Mundt
|
||||
*
|
||||
* SuperH SH4-202 MicroDev board support.
|
||||
*
|
||||
|
|
@ -15,11 +15,10 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <video/s1d13xxxfb.h>
|
||||
#include <asm/microdev.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/io.h>
|
||||
#include <asm/machvec.h>
|
||||
#include <asm/machvec_init.h>
|
||||
|
||||
extern void microdev_heartbeat(void);
|
||||
|
||||
|
|
@ -51,8 +50,6 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = {
|
|||
.mv_outsw = microdev_outsw,
|
||||
.mv_outsl = microdev_outsl,
|
||||
|
||||
.mv_isa_port2addr = microdev_isa_port2addr,
|
||||
|
||||
.mv_init_irq = init_microdev_irq,
|
||||
|
||||
#ifdef CONFIG_HEARTBEAT
|
||||
|
|
@ -142,16 +139,161 @@ static struct platform_device smc91x_device = {
|
|||
.resource = smc91x_resources,
|
||||
};
|
||||
|
||||
static int __init smc91x_setup(void)
|
||||
#ifdef CONFIG_FB_S1D13XXX
|
||||
static struct s1d13xxxfb_regval s1d13806_initregs[] = {
|
||||
{ S1DREG_MISC, 0x00 },
|
||||
{ S1DREG_COM_DISP_MODE, 0x00 },
|
||||
{ S1DREG_GPIO_CNF0, 0x00 },
|
||||
{ S1DREG_GPIO_CNF1, 0x00 },
|
||||
{ S1DREG_GPIO_CTL0, 0x00 },
|
||||
{ S1DREG_GPIO_CTL1, 0x00 },
|
||||
{ S1DREG_CLK_CNF, 0x02 },
|
||||
{ S1DREG_LCD_CLK_CNF, 0x01 },
|
||||
{ S1DREG_CRT_CLK_CNF, 0x03 },
|
||||
{ S1DREG_MPLUG_CLK_CNF, 0x03 },
|
||||
{ S1DREG_CPU2MEM_WST_SEL, 0x02 },
|
||||
{ S1DREG_SDRAM_REF_RATE, 0x03 },
|
||||
{ S1DREG_SDRAM_TC0, 0x00 },
|
||||
{ S1DREG_SDRAM_TC1, 0x01 },
|
||||
{ S1DREG_MEM_CNF, 0x80 },
|
||||
{ S1DREG_PANEL_TYPE, 0x25 },
|
||||
{ S1DREG_MOD_RATE, 0x00 },
|
||||
{ S1DREG_LCD_DISP_HWIDTH, 0x63 },
|
||||
{ S1DREG_LCD_NDISP_HPER, 0x1e },
|
||||
{ S1DREG_TFT_FPLINE_START, 0x06 },
|
||||
{ S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
|
||||
{ S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
|
||||
{ S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
|
||||
{ S1DREG_LCD_NDISP_VPER, 0x00 },
|
||||
{ S1DREG_TFT_FPFRAME_START, 0x0a },
|
||||
{ S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
|
||||
{ S1DREG_LCD_DISP_MODE, 0x03 },
|
||||
{ S1DREG_LCD_MISC, 0x00 },
|
||||
{ S1DREG_LCD_DISP_START0, 0x00 },
|
||||
{ S1DREG_LCD_DISP_START1, 0x00 },
|
||||
{ S1DREG_LCD_DISP_START2, 0x00 },
|
||||
{ S1DREG_LCD_MEM_OFF0, 0x90 },
|
||||
{ S1DREG_LCD_MEM_OFF1, 0x01 },
|
||||
{ S1DREG_LCD_PIX_PAN, 0x00 },
|
||||
{ S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
|
||||
{ S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
|
||||
{ S1DREG_CRT_DISP_HWIDTH, 0x63 },
|
||||
{ S1DREG_CRT_NDISP_HPER, 0x1f },
|
||||
{ S1DREG_CRT_HRTC_START, 0x04 },
|
||||
{ S1DREG_CRT_HRTC_PWIDTH, 0x8f },
|
||||
{ S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
|
||||
{ S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
|
||||
{ S1DREG_CRT_NDISP_VPER, 0x1b },
|
||||
{ S1DREG_CRT_VRTC_START, 0x00 },
|
||||
{ S1DREG_CRT_VRTC_PWIDTH, 0x83 },
|
||||
{ S1DREG_TV_OUT_CTL, 0x10 },
|
||||
{ S1DREG_CRT_DISP_MODE, 0x05 },
|
||||
{ S1DREG_CRT_DISP_START0, 0x00 },
|
||||
{ S1DREG_CRT_DISP_START1, 0x00 },
|
||||
{ S1DREG_CRT_DISP_START2, 0x00 },
|
||||
{ S1DREG_CRT_MEM_OFF0, 0x20 },
|
||||
{ S1DREG_CRT_MEM_OFF1, 0x03 },
|
||||
{ S1DREG_CRT_PIX_PAN, 0x00 },
|
||||
{ S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
|
||||
{ S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
|
||||
{ S1DREG_LCD_CUR_CTL, 0x00 },
|
||||
{ S1DREG_LCD_CUR_START, 0x01 },
|
||||
{ S1DREG_LCD_CUR_XPOS0, 0x00 },
|
||||
{ S1DREG_LCD_CUR_XPOS1, 0x00 },
|
||||
{ S1DREG_LCD_CUR_YPOS0, 0x00 },
|
||||
{ S1DREG_LCD_CUR_YPOS1, 0x00 },
|
||||
{ S1DREG_LCD_CUR_BCTL0, 0x00 },
|
||||
{ S1DREG_LCD_CUR_GCTL0, 0x00 },
|
||||
{ S1DREG_LCD_CUR_RCTL0, 0x00 },
|
||||
{ S1DREG_LCD_CUR_BCTL1, 0x1f },
|
||||
{ S1DREG_LCD_CUR_GCTL1, 0x3f },
|
||||
{ S1DREG_LCD_CUR_RCTL1, 0x1f },
|
||||
{ S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
|
||||
{ S1DREG_CRT_CUR_CTL, 0x00 },
|
||||
{ S1DREG_CRT_CUR_START, 0x01 },
|
||||
{ S1DREG_CRT_CUR_XPOS0, 0x00 },
|
||||
{ S1DREG_CRT_CUR_XPOS1, 0x00 },
|
||||
{ S1DREG_CRT_CUR_YPOS0, 0x00 },
|
||||
{ S1DREG_CRT_CUR_YPOS1, 0x00 },
|
||||
{ S1DREG_CRT_CUR_BCTL0, 0x00 },
|
||||
{ S1DREG_CRT_CUR_GCTL0, 0x00 },
|
||||
{ S1DREG_CRT_CUR_RCTL0, 0x00 },
|
||||
{ S1DREG_CRT_CUR_BCTL1, 0x1f },
|
||||
{ S1DREG_CRT_CUR_GCTL1, 0x3f },
|
||||
{ S1DREG_CRT_CUR_RCTL1, 0x1f },
|
||||
{ S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
|
||||
{ S1DREG_BBLT_CTL0, 0x00 },
|
||||
{ S1DREG_BBLT_CTL1, 0x00 },
|
||||
{ S1DREG_BBLT_CC_EXP, 0x00 },
|
||||
{ S1DREG_BBLT_OP, 0x00 },
|
||||
{ S1DREG_BBLT_SRC_START0, 0x00 },
|
||||
{ S1DREG_BBLT_SRC_START1, 0x00 },
|
||||
{ S1DREG_BBLT_SRC_START2, 0x00 },
|
||||
{ S1DREG_BBLT_DST_START0, 0x00 },
|
||||
{ S1DREG_BBLT_DST_START1, 0x00 },
|
||||
{ S1DREG_BBLT_DST_START2, 0x00 },
|
||||
{ S1DREG_BBLT_MEM_OFF0, 0x00 },
|
||||
{ S1DREG_BBLT_MEM_OFF1, 0x00 },
|
||||
{ S1DREG_BBLT_WIDTH0, 0x00 },
|
||||
{ S1DREG_BBLT_WIDTH1, 0x00 },
|
||||
{ S1DREG_BBLT_HEIGHT0, 0x00 },
|
||||
{ S1DREG_BBLT_HEIGHT1, 0x00 },
|
||||
{ S1DREG_BBLT_BGC0, 0x00 },
|
||||
{ S1DREG_BBLT_BGC1, 0x00 },
|
||||
{ S1DREG_BBLT_FGC0, 0x00 },
|
||||
{ S1DREG_BBLT_FGC1, 0x00 },
|
||||
{ S1DREG_LKUP_MODE, 0x00 },
|
||||
{ S1DREG_LKUP_ADDR, 0x00 },
|
||||
{ S1DREG_PS_CNF, 0x10 },
|
||||
{ S1DREG_PS_STATUS, 0x00 },
|
||||
{ S1DREG_CPU2MEM_WDOGT, 0x00 },
|
||||
{ S1DREG_COM_DISP_MODE, 0x02 },
|
||||
};
|
||||
|
||||
static struct s1d13xxxfb_pdata s1d13806_platform_data = {
|
||||
.initregs = s1d13806_initregs,
|
||||
.initregssize = ARRAY_SIZE(s1d13806_initregs),
|
||||
};
|
||||
|
||||
static struct resource s1d13806_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x07200000,
|
||||
.end = 0x07200000 + 0x00200000 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = 0x07000000,
|
||||
.end = 0x07000000 + 0x00200000 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device s1d13806_device = {
|
||||
.name = "s1d13806fb",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(s1d13806_resources),
|
||||
.resource = s1d13806_resources,
|
||||
|
||||
.dev = {
|
||||
.platform_data = &s1d13806_platform_data,
|
||||
},
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct platform_device *microdev_devices[] __initdata = {
|
||||
&smc91x_device,
|
||||
#ifdef CONFIG_FB_S1D13XXX
|
||||
&s1d13806_device,
|
||||
#endif
|
||||
};
|
||||
|
||||
static int __init microdev_devices_setup(void)
|
||||
{
|
||||
return platform_device_register(&smc91x_device);
|
||||
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
|
||||
}
|
||||
|
||||
__initcall(smc91x_setup);
|
||||
__initcall(microdev_devices_setup);
|
||||
|
||||
/*
|
||||
* Initialize the board
|
||||
*/
|
||||
void __init platform_setup(void)
|
||||
{
|
||||
int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
|
||||
|
|
|
|||
|
|
@ -1,10 +1,9 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11-sh
|
||||
# Wed Mar 2 15:09:41 2005
|
||||
# Linux kernel version: 2.6.16-rc1
|
||||
# Fri Jan 27 19:43:20 2006
|
||||
#
|
||||
CONFIG_SUPERH=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
|
|
@ -17,11 +16,13 @@ CONFIG_EXPERIMENTAL=y
|
|||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_LOCK_KERNEL=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
CONFIG_SWAP=y
|
||||
# CONFIG_SYSVIPC is not set
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
|
|
@ -29,28 +30,53 @@ CONFIG_BSD_PROCESS_ACCT=y
|
|||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_UID16=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
# CONFIG_MODULES is not set
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
# CONFIG_LBD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# System type
|
||||
#
|
||||
|
|
@ -61,9 +87,7 @@ CONFIG_CC_ALIGN_JUMPS=0
|
|||
# CONFIG_SH_7751_SYSTEMH is not set
|
||||
# CONFIG_SH_STB1_HARP is not set
|
||||
# CONFIG_SH_STB1_OVERDRIVE is not set
|
||||
# CONFIG_SH_HP620 is not set
|
||||
# CONFIG_SH_HP680 is not set
|
||||
# CONFIG_SH_HP690 is not set
|
||||
# CONFIG_SH_HP6XX is not set
|
||||
# CONFIG_SH_CQREEK is not set
|
||||
# CONFIG_SH_DMIDA is not set
|
||||
# CONFIG_SH_EC3104 is not set
|
||||
|
|
@ -78,45 +102,94 @@ CONFIG_CC_ALIGN_JUMPS=0
|
|||
# CONFIG_SH_SECUREEDGE5410 is not set
|
||||
# CONFIG_SH_HS7751RVOIP is not set
|
||||
# CONFIG_SH_RTS7751R2D is not set
|
||||
# CONFIG_SH_R7780RP is not set
|
||||
# CONFIG_SH_EDOSK7705 is not set
|
||||
CONFIG_SH_SH4202_MICRODEV=y
|
||||
# CONFIG_SH_LANDISK is not set
|
||||
# CONFIG_SH_TITAN is not set
|
||||
# CONFIG_SH_UNKNOWN is not set
|
||||
# CONFIG_CPU_SH2 is not set
|
||||
# CONFIG_CPU_SH3 is not set
|
||||
|
||||
#
|
||||
# Processor selection
|
||||
#
|
||||
CONFIG_CPU_SH4=y
|
||||
|
||||
#
|
||||
# SH-2 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7604 is not set
|
||||
|
||||
#
|
||||
# SH-3 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7300 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7705 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7707 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7708 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7709 is not set
|
||||
|
||||
#
|
||||
# SH-4 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH7750 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7091 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7750R is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7750S is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7751 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7751R is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7760 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH73180 is not set
|
||||
CONFIG_CPU_SUBTYPE_SH4_202=y
|
||||
|
||||
#
|
||||
# ST40 Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
|
||||
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
|
||||
CONFIG_CPU_SUBTYPE_SH4_202=y
|
||||
|
||||
#
|
||||
# SH-4A Processor Support
|
||||
#
|
||||
# CONFIG_CPU_SUBTYPE_SH73180 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7770 is not set
|
||||
# CONFIG_CPU_SUBTYPE_SH7780 is not set
|
||||
|
||||
#
|
||||
# Memory management options
|
||||
#
|
||||
CONFIG_MMU=y
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE="console=ttySC0,115200"
|
||||
CONFIG_MEMORY_START=0x08000000
|
||||
CONFIG_MEMORY_SIZE=0x04000000
|
||||
CONFIG_MEMORY_SET=y
|
||||
# CONFIG_MEMORY_OVERRIDE is not set
|
||||
CONFIG_SH_RTC=y
|
||||
CONFIG_SH_FPU=y
|
||||
CONFIG_ZERO_PAGE_OFFSET=0x00001000
|
||||
CONFIG_BOOT_LINK_OFFSET=0x00800000
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_UBC_WAKEUP is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
|
||||
#
|
||||
# Cache configuration
|
||||
#
|
||||
# CONFIG_SH_DIRECT_MAPPED is not set
|
||||
# CONFIG_SH_WRITETHROUGH is not set
|
||||
# CONFIG_SH_OCRAM is not set
|
||||
CONFIG_MEMORY_START=0x08000000
|
||||
CONFIG_MEMORY_SIZE=0x04000000
|
||||
|
||||
#
|
||||
# Processor features
|
||||
#
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_SH_RTC=y
|
||||
CONFIG_SH_FPU=y
|
||||
# CONFIG_SH_STORE_QUEUES is not set
|
||||
# CONFIG_SMP is not set
|
||||
CONFIG_SH_PCLK_CALC=y
|
||||
CONFIG_SH_PCLK_FREQ=65986048
|
||||
CONFIG_CPU_HAS_INTEVT=y
|
||||
CONFIG_CPU_HAS_SR_RB=y
|
||||
|
||||
#
|
||||
# Timer support
|
||||
#
|
||||
CONFIG_SH_TMU=y
|
||||
CONFIG_SH_PCLK_FREQ=66000000
|
||||
|
||||
#
|
||||
# CPU Frequency scaling
|
||||
|
|
@ -137,9 +210,25 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
|
|||
CONFIG_HEARTBEAT=y
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
# Kernel features
|
||||
#
|
||||
CONFIG_ISA=y
|
||||
# CONFIG_KEXEC is not set
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_SMP is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZERO_PAGE_OFFSET=0x00001000
|
||||
CONFIG_BOOT_LINK_OFFSET=0x00800000
|
||||
# CONFIG_UBC_WAKEUP is not set
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE="console=ttySC0,115200"
|
||||
|
||||
#
|
||||
# Bus options
|
||||
#
|
||||
# CONFIG_SUPERHYWAY is not set
|
||||
# CONFIG_PCI is not set
|
||||
|
||||
#
|
||||
|
|
@ -147,11 +236,6 @@ CONFIG_ISA=y
|
|||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
CONFIG_PCMCIA_PROBE=y
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
|
|
@ -164,9 +248,79 @@ CONFIG_BINFMT_ELF=y
|
|||
# CONFIG_BINFMT_MISC is not set
|
||||
|
||||
#
|
||||
# SH initrd options
|
||||
# Networking
|
||||
#
|
||||
# CONFIG_EMBEDDED_RAMDISK is not set
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_PACKET is not set
|
||||
# CONFIG_UNIX is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
|
|
@ -179,6 +333,11 @@ CONFIG_STANDALONE=y
|
|||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
|
|
@ -192,13 +351,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
|
|||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
# CONFIG_PNP is not set
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_XD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
|
|
@ -206,17 +362,7 @@ CONFIG_BLK_DEV_RAM=y
|
|||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
|
|
@ -241,9 +387,7 @@ CONFIG_BLK_DEV_IDECD=y
|
|||
# IDE chipset support/bugfixes
|
||||
#
|
||||
CONFIG_IDE_GENERIC=y
|
||||
CONFIG_IDE_SH=y
|
||||
# CONFIG_IDE_ARM is not set
|
||||
# CONFIG_IDE_CHIPSETS is not set
|
||||
# CONFIG_BLK_DEV_IDEDMA is not set
|
||||
# CONFIG_IDEDMA_AUTO is not set
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
|
|
@ -251,13 +395,9 @@ CONFIG_IDE_SH=y
|
|||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Old CD-ROM drivers (not SCSI, not IDE)
|
||||
#
|
||||
# CONFIG_CD_NO_IDESCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
|
|
@ -266,6 +406,7 @@ CONFIG_IDE_SH=y
|
|||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
|
|
@ -276,69 +417,8 @@ CONFIG_IDE_SH=y
|
|||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_PACKET is not set
|
||||
# CONFIG_NETLINK_DEV is not set
|
||||
# CONFIG_UNIX is not set
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
|
|
@ -346,9 +426,9 @@ CONFIG_NETDEVICES=y
|
|||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
# PHY device support
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
# CONFIG_PHYLIB is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
|
|
@ -356,17 +436,7 @@ CONFIG_NETDEVICES=y
|
|||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_STNIC is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_LANCE is not set
|
||||
# CONFIG_NET_VENDOR_SMC is not set
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_NET_VENDOR_RACAL is not set
|
||||
# CONFIG_AT1700 is not set
|
||||
# CONFIG_DEPCA is not set
|
||||
# CONFIG_HP100 is not set
|
||||
# CONFIG_NET_ISA is not set
|
||||
# CONFIG_NET_PCI is not set
|
||||
# CONFIG_NET_POCKET is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
|
|
@ -379,7 +449,6 @@ CONFIG_SMC91X=y
|
|||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
|
|
@ -394,6 +463,8 @@ CONFIG_SMC91X=y
|
|||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
|
|
@ -411,20 +482,10 @@ CONFIG_SMC91X=y
|
|||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
# Hardware I/O ports
|
||||
#
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
|
|
@ -464,23 +525,45 @@ CONFIG_RTC=y
|
|||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia Capabilities Port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
|
|
@ -508,7 +591,7 @@ CONFIG_RTC=y
|
|||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
|
|
@ -524,13 +607,21 @@ CONFIG_RTC=y
|
|||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# SN Devices
|
||||
#
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS)
|
||||
#
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
|
|
@ -540,17 +631,17 @@ CONFIG_JBD=y
|
|||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
|
|
@ -574,16 +665,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
|||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_DEVFS_FS=y
|
||||
CONFIG_DEVFS_MOUNT=y
|
||||
# CONFIG_DEVFS_DEBUG is not set
|
||||
CONFIG_DEVPTS_FS_XATTR=y
|
||||
# CONFIG_DEVPTS_FS_SECURITY is not set
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLBFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
|
|
@ -607,12 +694,14 @@ CONFIG_RAMFS=y
|
|||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
CONFIG_NFS_V4=y
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
CONFIG_SUNRPC_GSS=y
|
||||
CONFIG_RPCSEC_GSS_KRB5=y
|
||||
|
|
@ -622,6 +711,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
|
|||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
|
|
@ -681,8 +771,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
|||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_DEBUG_PREEMPT=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_FRAME_POINTER is not set
|
||||
# CONFIG_SH_STANDARD_BIOS is not set
|
||||
# CONFIG_EARLY_SCIF_CONSOLE is not set
|
||||
|
|
@ -706,6 +798,7 @@ CONFIG_CRYPTO_MD5=y
|
|||
# CONFIG_CRYPTO_SHA256 is not set
|
||||
# CONFIG_CRYPTO_SHA512 is not set
|
||||
# CONFIG_CRYPTO_WP512 is not set
|
||||
# CONFIG_CRYPTO_TGR192 is not set
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_BLOWFISH is not set
|
||||
# CONFIG_CRYPTO_TWOFISH is not set
|
||||
|
|
@ -730,5 +823,6 @@ CONFIG_CRYPTO_DES=y
|
|||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
# CONFIG_CRC16 is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
|
|
|
|||
|
|
@ -1,31 +1,26 @@
|
|||
/*
|
||||
* linux/include/asm-sh/irq_microdev.h
|
||||
* linux/include/asm-sh/microdev.h
|
||||
*
|
||||
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
|
||||
*
|
||||
* IRQ functions for the SuperH SH4-202 MicroDev board.
|
||||
* Definitions for the SuperH SH4-202 MicroDev board.
|
||||
*
|
||||
* May be copied or modified under the terms of the GNU General Public
|
||||
* License. See linux/COPYING for more information.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _ASM_SH_IRQ_MICRODEV_H
|
||||
#define _ASM_SH_IRQ_MICRODEV_H
|
||||
#ifndef __ASM_SH_MICRODEV_H
|
||||
#define __ASM_SH_MICRODEV_H
|
||||
|
||||
extern void init_microdev_irq(void);
|
||||
extern void microdev_print_fpga_intc_status(void);
|
||||
|
||||
|
||||
/*
|
||||
* The following are useful macros for manipulating the
|
||||
* interrupt controller (INTC) on the CPU-board FPGA.
|
||||
* It should be noted that there is an INTC on the FPGA,
|
||||
* and a seperate INTC on the SH4-202 core - these are
|
||||
* two different things, both of which need to be prorammed
|
||||
* to correctly route - unfortunately, they have the
|
||||
* same name and abbreviations!
|
||||
/*
|
||||
* The following are useful macros for manipulating the interrupt
|
||||
* controller (INTC) on the CPU-board FPGA. should be noted that there
|
||||
* is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
|
||||
* these are two different things, both of which need to be prorammed to
|
||||
* correctly route - unfortunately, they have the same name and
|
||||
* abbreviations!
|
||||
*/
|
||||
#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
|
||||
#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
|
||||
|
|
@ -38,9 +33,9 @@ extern void microdev_print_fpga_intc_status(void);
|
|||
#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
|
||||
|
||||
|
||||
/*
|
||||
* The following are the IRQ numbers for the Linux Kernel for external interrupts.
|
||||
* i.e. the numbers seen by 'cat /proc/interrupt'.
|
||||
/*
|
||||
* The following are the IRQ numbers for the Linux Kernel for external
|
||||
* interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
|
||||
*/
|
||||
#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
|
||||
#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
|
||||
|
|
@ -51,9 +46,10 @@ extern void microdev_print_fpga_intc_status(void);
|
|||
#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
|
||||
#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
|
||||
|
||||
/*
|
||||
* The following are the IRQ numbers for the INTC on the FPGA for external interrupts.
|
||||
* i.e. the bits in the INTC registers in the FPGA.
|
||||
/*
|
||||
* The following are the IRQ numbers for the INTC on the FPGA for
|
||||
* external interrupts. i.e. the bits in the INTC registers in the
|
||||
* FPGA.
|
||||
*/
|
||||
#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
|
||||
#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
|
||||
|
|
@ -69,4 +65,16 @@ extern void microdev_print_fpga_intc_status(void);
|
|||
#define MICRODEV_IRQ_PCI_INTC 10
|
||||
#define MICRODEV_IRQ_PCI_INTD 11
|
||||
|
||||
#endif /* _ASM_SH_IRQ_MICRODEV_H */
|
||||
#define __IO_PREFIX microdev
|
||||
#include <asm/io_generic.h>
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
unsigned char microdev_pci_inb(unsigned long port);
|
||||
unsigned short microdev_pci_inw(unsigned long port);
|
||||
unsigned long microdev_pci_inl(unsigned long port);
|
||||
void microdev_pci_outb(unsigned char data, unsigned long port);
|
||||
void microdev_pci_outw(unsigned short data, unsigned long port);
|
||||
void microdev_pci_outl(unsigned long data, unsigned long port);
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_SH_MICRODEV_H */
|
||||
|
|
@ -1,53 +0,0 @@
|
|||
/*
|
||||
* linux/include/asm-sh/io_microdev.h
|
||||
*
|
||||
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
|
||||
*
|
||||
* IO functions for the SuperH SH4-202 MicroDev board.
|
||||
*
|
||||
* May be copied or modified under the terms of the GNU General Public
|
||||
* License. See linux/COPYING for more information.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _ASM_SH_IO_MICRODEV_H
|
||||
#define _ASM_SH_IO_MICRODEV_H
|
||||
|
||||
extern unsigned long microdev_isa_port2addr(unsigned long offset);
|
||||
|
||||
extern unsigned char microdev_inb(unsigned long port);
|
||||
extern unsigned short microdev_inw(unsigned long port);
|
||||
extern unsigned int microdev_inl(unsigned long port);
|
||||
|
||||
extern void microdev_outb(unsigned char value, unsigned long port);
|
||||
extern void microdev_outw(unsigned short value, unsigned long port);
|
||||
extern void microdev_outl(unsigned int value, unsigned long port);
|
||||
|
||||
extern unsigned char microdev_inb_p(unsigned long port);
|
||||
extern unsigned short microdev_inw_p(unsigned long port);
|
||||
extern unsigned int microdev_inl_p(unsigned long port);
|
||||
|
||||
extern void microdev_outb_p(unsigned char value, unsigned long port);
|
||||
extern void microdev_outw_p(unsigned short value, unsigned long port);
|
||||
extern void microdev_outl_p(unsigned int value, unsigned long port);
|
||||
|
||||
extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
|
||||
extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
|
||||
extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
|
||||
|
||||
extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
|
||||
extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
|
||||
extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
|
||||
|
||||
#if defined(CONFIG_PCI)
|
||||
extern unsigned char microdev_pci_inb(unsigned long port);
|
||||
extern unsigned short microdev_pci_inw(unsigned long port);
|
||||
extern unsigned long microdev_pci_inl(unsigned long port);
|
||||
extern void microdev_pci_outb(unsigned char data, unsigned long port);
|
||||
extern void microdev_pci_outw(unsigned short data, unsigned long port);
|
||||
extern void microdev_pci_outl(unsigned long data, unsigned long port);
|
||||
#endif
|
||||
|
||||
#endif /* _ASM_SH_IO_MICRODEV_H */
|
||||
|
||||
Loading…
Reference in a new issue