diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host new file mode 100644 index 000000000000..29a4f892e433 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -0,0 +1,13 @@ +What: /sys/class/scsi_host/hostX/isci_id +Date: June 2011 +Contact: Dave Jiang +Description: + This file contains the enumerated host ID for the Intel + SCU controller. The Intel(R) C600 Series Chipset SATA/SAS + Storage Control Unit embeds up to two 4-port controllers in + a single PCI device. The controllers are enumerated in order + which usually means the lowest number scsi_host corresponds + with the first controller, but this association is not + guaranteed. The 'isci_id' attribute unambiguously identifies + the controller index: '0' for the first controller, + '1' for the second. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 6f3c598971fc..06eb6d957c83 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -380,7 +380,7 @@ will be charged as a new owner of it. 5.2 stat file -5.2.1 memory.stat file includes following statistics +memory.stat file includes following statistics # per-memory cgroup local status cache - # of bytes of page cache memory. @@ -438,89 +438,6 @@ Note: file_mapped is accounted only when the memory cgroup is owner of page cache.) -5.2.2 memory.vmscan_stat - -memory.vmscan_stat includes statistics information for memory scanning and -freeing, reclaiming. The statistics shows memory scanning information since -memory cgroup creation and can be reset to 0 by writing 0 as - - #echo 0 > ../memory.vmscan_stat - -This file contains following statistics. - -[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy] -[param]_elapsed_ns_by_[reason]_[under_hierarchy] - -For example, - - scanned_file_pages_by_limit indicates the number of scanned - file pages at vmscan. - -Now, 3 parameters are supported - - scanned - the number of pages scanned by vmscan - rotated - the number of pages activated at vmscan - freed - the number of pages freed by vmscan - -If "rotated" is high against scanned/freed, the memcg seems busy. - -Now, 2 reason are supported - - limit - the memory cgroup's limit - system - global memory pressure + softlimit - (global memory pressure not under softlimit is not handled now) - -When under_hierarchy is added in the tail, the number indicates the -total memcg scan of its children and itself. - -elapsed_ns is a elapsed time in nanosecond. This may include sleep time -and not indicates CPU usage. So, please take this as just showing -latency. - -Here is an example. - -# cat /cgroup/memory/A/memory.vmscan_stat -scanned_pages_by_limit 9471864 -scanned_anon_pages_by_limit 6640629 -scanned_file_pages_by_limit 2831235 -rotated_pages_by_limit 4243974 -rotated_anon_pages_by_limit 3971968 -rotated_file_pages_by_limit 272006 -freed_pages_by_limit 2318492 -freed_anon_pages_by_limit 962052 -freed_file_pages_by_limit 1356440 -elapsed_ns_by_limit 351386416101 -scanned_pages_by_system 0 -scanned_anon_pages_by_system 0 -scanned_file_pages_by_system 0 -rotated_pages_by_system 0 -rotated_anon_pages_by_system 0 -rotated_file_pages_by_system 0 -freed_pages_by_system 0 -freed_anon_pages_by_system 0 -freed_file_pages_by_system 0 -elapsed_ns_by_system 0 -scanned_pages_by_limit_under_hierarchy 9471864 -scanned_anon_pages_by_limit_under_hierarchy 6640629 -scanned_file_pages_by_limit_under_hierarchy 2831235 -rotated_pages_by_limit_under_hierarchy 4243974 -rotated_anon_pages_by_limit_under_hierarchy 3971968 -rotated_file_pages_by_limit_under_hierarchy 272006 -freed_pages_by_limit_under_hierarchy 2318492 -freed_anon_pages_by_limit_under_hierarchy 962052 -freed_file_pages_by_limit_under_hierarchy 1356440 -elapsed_ns_by_limit_under_hierarchy 351386416101 -scanned_pages_by_system_under_hierarchy 0 -scanned_anon_pages_by_system_under_hierarchy 0 -scanned_file_pages_by_system_under_hierarchy 0 -rotated_pages_by_system_under_hierarchy 0 -rotated_anon_pages_by_system_under_hierarchy 0 -rotated_file_pages_by_system_under_hierarchy 0 -freed_pages_by_system_under_hierarchy 0 -freed_anon_pages_by_system_under_hierarchy 0 -freed_file_pages_by_system_under_hierarchy 0 -elapsed_ns_by_system_under_hierarchy 0 - 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 614d0382e2cb..854ed5ca7e3f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Override pmtimer IOPort with a hex value. e.g. pmtmr=0x508 - pnp.debug [PNP] - Enable PNP debug messages. This depends on the - CONFIG_PNP_DEBUG_MESSAGES option. + pnp.debug=1 [PNP] + Enable PNP debug messages (depends on the + CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time + via /sys/module/pnp/parameters/debug. We always show + current resource usage; turning this on also shows + possible settings and some assignment information. pnpacpi= [ACPI] { off } diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt index 8006c227fda2..25320bf19c86 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/dmfe.txt @@ -1,3 +1,5 @@ +Note: This driver doesn't have a maintainer. + Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. This program is free software; you can redistribute it and/or @@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases. Authors: Sten Wang : Original Author -Tobias Ringstrom : Current Maintainer Contributors: diff --git a/MAINTAINERS b/MAINTAINERS index 28f65c249b97..ae8820e173a2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn M: Chris Snook -M: Jie Yang L: netdev@vger.kernel.org W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net @@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/ BROCADE BNA 10 GIGABIT ETHERNET DRIVER M: Rasesh Mody -M: Debashis Dutt L: netdev@vger.kernel.org S: Supported F: drivers/net/bna/ @@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti -M: Vasanthy Kolluri M: Roopa Prabhu M: David Wang S: Supported @@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt F: drivers/input/input-mt.c K: \b(ABS|SYN)_MT_ +INTEL C600 SERIES SAS CONTROLLER DRIVER +M: Intel SCU Linux support +M: Dan Williams +M: Dave Jiang +M: Ed Nadolski +L: linux-scsi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git +S: Maintained +F: drivers/scsi/isci/ +F: firmware/isci/ + INTEL IDLE DRIVER M: Len Brown L: linux-pm@lists.linux-foundation.org @@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM M: Boaz Harrosh -M: Benny Halevy +M: Benny Halevy L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git @@ -7200,6 +7209,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: drivers/leds/leds-wm83*.c +F: drivers/input/misc/wm831x-on.c +F: drivers/input/touchscreen/wm831x-ts.c +F: drivers/input/touchscreen/wm97*.c F: drivers/mfd/wm8*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c @@ -7209,6 +7221,7 @@ F: drivers/watchdog/wm83*_wdt.c F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* +F: include/linux/wm97xx.h F: include/sound/wm????.h F: sound/soc/codecs/wm* diff --git a/Makefile b/Makefile index 522fa4784e69..733dcba61f34 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = "Divemaster Edition" # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 60cde53d266c..8bb936226dee 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE def_bool y config GENERIC_GPIO - def_bool y + bool config ZONE_DMA bool diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 1561b036a9bf..79d6cd0c8e7b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -1160,7 +1160,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..df6ef1b2f98b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index fcf0ae95651f..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include #include #include +#include