Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -69,9 +69,13 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
+		sci - The number of times the ACPI SCI
-		has claimed an interrupt.
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 

Documentation/DocBook/kernel-api.tmpl

@@ -190,16 +190,20 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
 !Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
 !Edrivers/pci/rom.c
 !Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c

Documentation/filesystems/caching/cachefiles.txt

@@ -407,7 +407,7 @@ A NOTE ON SECURITY
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
+objective security (task->real_cred) and the subjective security (task->cred).
-objective security holds the intrinsic security properties of a process and is
+The objective security holds the intrinsic security properties of a process and
-never overridden.  This is what appears in /proc, and is what is used when a
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 

Documentation/filesystems/vfs.txt

@@ -277,8 +277,7 @@ or bottom half).
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics. This
+  statfs: called when the VFS needs to get filesystem statistics.
-	is called with the kernel lock held
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held

Documentation/isdn/00-INDEX

@@ -2,8 +2,14 @@
 	- this file (info on ISDN implementation for Linux)
 CREDITS
 	- list of the kind folks that brought you this stuff.
+HiSax.cert
+	- information about the ITU approval certification of the HiSax driver.
 INTERFACE
-	- description of Linklevel and Hardwarelevel ISDN interface.
+	- description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+	- description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+	- description of kernel CAPI Link Level to Hardware Level interface.
 README
 	- general info on what you need and what to do for Linux ISDN.
 README.FAQ
@@ -12,6 +18,8 @@ README.audio
 	- info for running audio over ISDN.
 README.fax
 	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
 README.HiSax
@@ -37,7 +45,8 @@ README.diversion
 README.sc
 	- info on driver for Spellcaster cards.
 README.x25
-    _ info for running X.25 over ISDN.
+	- info for running X.25 over ISDN.
 README.hysdn
-        - info on driver for Hypercope active HYSDN cards
+	- info on driver for Hypercope active HYSDN cards
- 
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN).

Documentation/isdn/INTERFACE.CAPI

@@ -0,0 +1,213 @@
+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+	the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+	the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+	a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+	pointer to the driver module owning the device
+
+void *driverdata
+	an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+	the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+	the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+	(optional) pointer to a callback function for sending firmware and
+	configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+	pointer to a callback function for performing a reset on the device,
+	releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+			capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+	pointers to callback functions for registration and deregistration of
+	applications with the device
+
+u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+	pointer to a callback function for sending a CAPI message to the
+	device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+	pointer to a callback function returning the entry for the device in
+	the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+	pointer to the read_proc callback function for the device's proc file
+	system entry, /proc/capi/controllers/<n>; will be called with a
+	pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+	value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+	value to return for CAPI_GET_VERSION
+
+capi_profile profile
+	value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+	value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+	register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+	register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+	signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+	signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+				struct sk_buff *skb)
+	pass a received CAPI message to Kernel CAPI
+	for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+			u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+u16  capilib_data_b3_req(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro		Set Macro			Element (Type)
+
+CAPIMSG_LEN(m)		CAPIMSG_SETLEN(m, len)		Total Length (u16)
+CAPIMSG_APPID(m)	CAPIMSG_SETAPPID(m, applid)	ApplID (u16)
+CAPIMSG_COMMAND(m)	CAPIMSG_SETCOMMAND(m,cmd)	Command (u8)
+CAPIMSG_SUBCOMMAND(m)	CAPIMSG_SETSUBCOMMAND(m, cmd)	Subcommand (u8)
+CAPIMSG_CMD(m)		-				Command*256
+							+ Subcommand (u16)
+CAPIMSG_MSGID(m)	CAPIMSG_SETMSGID(m, msgid)	Message Number (u16)
+
+CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
+							(u32)
+CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
+

Documentation/kernel-parameters.txt

@@ -1620,6 +1620,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nowb		[ARM]
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
 	nptcg=		[IA64] Override max number of concurrent global TLB
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.

Documentation/laptops/thinkpad-acpi.txt

@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.22
+                            Version 0.23
-                        November 23rd,  2008
+                          April 10th, 2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>

Documentation/logo.txt

@@ -1,4 +1,13 @@
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
+This is the full-colour version of the currently unofficial Linux logo
-standing in.  He's taken pains to ensure you'll hardly notice.
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet).  It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist. 
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+	http://www.isc.tamu.edu/~lewing/linux/
 
-Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.

Documentation/powerpc/booting-without-of.txt

@@ -43,12 +43,11 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
+      c) 4xx/Axon EMAC ethernet nodes
-      d) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
-      e) Xilinx IP cores
+      e) USB EHCI controllers
-      f) USB EHCI controllers
+      f) MDIO on GPIOs
-      g) MDIO on GPIOs
+      g) SPI busses
-      h) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -999,7 +998,7 @@ compatibility.
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader. 
+      loader.
 
 
   Recommended properties:
@@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
 		device_type = "open-pic";
 	};
 
-   c) CFI or JEDEC memory-mapped NOR flash
+    c) 4xx/Axon EMAC ethernet nodes
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-    d) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
 			   available.
 			   For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model.
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-      
+
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

Documentation/powerpc/dts-bindings/mtd-physmap.txt

@@ -0,0 +1,80 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};

Documentation/spi/spi-summary

@@ -511,10 +511,16 @@ SPI MASTER METHODS
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
+
 	Unless each SPI slave has its own configuration registers, don't
 	change them right away ... otherwise drivers could corrupt I/O
 	that's in progress for other SPI devices.
 
+		** BUG ALERT:  for some reason the first version of
+		** many spi_master drivers seems to get this wrong.
+		** When you code setup(), ASSUME that the controller
+		** is actively processing transfers for another device.
+
     master->transfer(struct spi_device *spi, struct spi_message *message)
     	This must not sleep.  Its responsibility is arrange that the
 	transfer happens and its complete() callback is issued.  The two

MAINTAINERS

@@ -1337,12 +1337,9 @@ L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
-F:	arch/powerpc/include/asm/lv1call.h
-F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
-F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -2065,6 +2062,8 @@ F:	drivers/infiniband/hw/ehca/
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
+P:	Matt Mackall
+M:	mpm@selenic.com
 P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
@@ -2562,7 +2561,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend*.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
@@ -2760,7 +2758,7 @@ IDE SUBSYSTEM
 P:	Bartlomiej Zolnierkiewicz
 M:	bzolnier@gmail.com
 L:	linux-ide@vger.kernel.org
-T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
@@ -3340,7 +3338,7 @@ P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	Documentation/vm/kmemtrace.txt
+F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
@@ -3450,7 +3448,7 @@ P:	Matt Porter
 M:	mporter@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
@@ -3993,8 +3991,8 @@ NETWORKING [GENERAL]
 P:	David S. Miller
 M:	davem@davemloft.net
 L:	netdev@vger.kernel.org
-W:	http://linux-net.osdl.org/
+W:	http://www.linuxfoundation.org/en/Net
-T:	git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -4035,6 +4033,13 @@ F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/net/wireless.h
 
+NETWORKING DRIVERS
+L:	netdev@vger.kernel.org
+W:	http://www.linuxfoundation.org/en/Net
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+S:	Odd Fixes
+F:	drivers/net/
+
 NETXEN (1/10) GbE SUPPORT
 P:	Dhananjay Phadke
 M:	dhananjay@netxen.com
@@ -4506,7 +4511,9 @@ F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
+F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
+F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris
@@ -5404,7 +5411,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend.h
 
 SVGA HANDLING
 P:	Martin Mares
@@ -5638,7 +5644,7 @@ L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
 P:	Yoshinori Sato
 M:	ysato@users.sourceforge.jp
 W:	http://uclinux-h8.sourceforge.jp/

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
-NAME = Temporary Tasmanian Devil
+NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/alpha/include/asm/percpu.h

@@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */

arch/alpha/kernel/head.S

@@ -7,10 +7,11 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
+#include <linux/init.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 
-.section .text.head, "ax"
+__HEAD
 .globl swapper_pg_dir
 .globl _stext
 swapper_pg_dir=SWAPPER_PGD

arch/alpha/kernel/vmlinux.lds.S

@@ -16,7 +16,7 @@ SECTIONS
 
 	_text = .;	/* Text and read-only data */
 	.text : {
-	*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT

arch/arm/include/asm/unistd.h

@@ -387,6 +387,8 @@
 #define __NR_dup3			(__NR_SYSCALL_BASE+358)
 #define __NR_pipe2			(__NR_SYSCALL_BASE+359)
 #define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -370,6 +370,8 @@
 		CALL(sys_dup3)
 		CALL(sys_pipe2)
 /* 360 */	CALL(sys_inotify_init1)
+		CALL(sys_preadv)
+		CALL(sys_pwritev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/sys_oabi-compat.c

@@ -177,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd,
 				   int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+	error = vfs_fstatat(dfd, filename, &stat, flag);
-		goto out;
+	if (error)
-
+		return error;
-	if (flag & AT_SYMLINK_NOFOLLOW)
+	return cp_oldabi_stat64(&stat, statbuf);
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-	error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
-	return error;
 }
 
 struct oabi_flock64 {

arch/arm/mach-at91/at91rm9200_time.c

@@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = {
 	.handler	= at91rm9200_timer_interrupt
 };
 
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
 }

arch/arm/mach-at91/at91sam926x_time.c

@@ -31,7 +31,7 @@ static u32 pit_cnt;		/* access only w/system irq blocked */
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
  * We don't care whether or not PIT irqs are enabled.
  */
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 elapsed;

arch/arm/mach-davinci/time.c

@@ -238,7 +238,7 @@ static void __init timer_init(void)
 /*
  * clocksource
  */
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	struct timer_s *t = &timers[TID_CLOCKSOURCE];
 

arch/arm/mach-imx/include/mach/gpio.h

@@ -1,6 +1,7 @@
 #ifndef _IMX_GPIO_H
 
 #include <linux/kernel.h>
+#include <mach/hardware.h>
 #include <mach/imx-regs.h>
 
 #define IMX_GPIO_ALLOC_MODE_NORMAL	0

arch/arm/mach-imx/time.c

@@ -73,7 +73,7 @@ static void __init imx_timer_hardware_init(void)
 	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
 }
 
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
 {
 	return IMX_TCN(TIMER_BASE);
 }

arch/arm/mach-ixp4xx/common.c

@@ -401,7 +401,7 @@ void __init ixp4xx_sys_init(void)
 /*
  * clocksource
  */
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
 {
 	return *IXP4XX_OSTS;
 }

arch/arm/mach-kirkwood/common.c

@@ -23,6 +23,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>

arch/arm/mach-kirkwood/include/mach/bridge-regs.h

@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET		0x00000002
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH		0x00000010
+
+#endif

arch/arm/mach-kirkwood/include/mach/debug-macro.S

@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0

arch/arm/mach-kirkwood/include/mach/entry-macro.S

@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -43,44 +43,6 @@
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID	0x6281
-#define MV88F6281_REV_Z0	0
-#define MV88F6281_REV_A0	2
-
-#define MV88F6192_DEV_ID	0x6192
-#define MV88F6192_REV_Z0	0
-#define MV88F6192_REV_A0	2
-
-#define MV88F6180_DEV_ID	0x6180
-#define MV88F6180_REV_A0	2
-
 /*
  * Register Map
  */
@@ -99,6 +61,8 @@
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@@ -119,5 +83,18 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID	0x6281
+#define MV88F6281_REV_Z0	0
+#define MV88F6281_REV_A0	2
+
+#define MV88F6192_DEV_ID	0x6192
+#define MV88F6192_REV_Z0	0
+#define MV88F6192_REV_A0	2
+
+#define MV88F6180_DEV_ID	0x6180
+#define MV88F6180_REV_A0	2
 
 #endif

arch/arm/mach-kirkwood/include/mach/system.h

@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
-#include <mach/kirkwood.h>
 
 static inline void arch_idle(void)
 {

arch/arm/mach-kirkwood/irq.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <asm/gpio.h>
 #include "common.h"

arch/arm/mach-loki/addr-map.c

@@ -38,6 +38,7 @@
 /*
  * CPU Address Decode Windows registers
  */
+#define BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))

arch/arm/mach-loki/include/mach/bridge-regs.h

@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	0x0004
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF		0x0000
+#define IRQ_MASK_OFF		0x0004
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif

arch/arm/mach-loki/include/mach/entry-macro.S

@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm

arch/arm/mach-loki/include/mach/loki.h

@@ -58,20 +58,6 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	0x0004
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_OFF		0x0000
-#define   IRQ_MASK_OFF		0x0004
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
 
 #define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
 

arch/arm/mach-loki/include/mach/system.h

@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
-#include <mach/loki.h>
 
 static inline void arch_idle(void)
 {

arch/arm/mach-loki/irq.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 

arch/arm/mach-msm/timer.c

@@ -57,12 +57,12 @@ static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
 {
 	return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
 }
 
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
 {
 	return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
 }

arch/arm/mach-mv78xx0/common.c

@@ -20,6 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/orion_nand.h>

arch/arm/mach-mv78xx0/include/mach/bridge-regs.h

@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH		0x00020000
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF	0x0000
+#define IRQ_CAUSE_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0008
+#define IRQ_MASK_ERR_OFF	0x000c
+#define IRQ_MASK_LOW_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif

arch/arm/mach-mv78xx0/include/mach/entry-macro.S

@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h

@@ -59,37 +59,6 @@
  * Core-specific peripheral registers.
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   L2_WRITETHROUGH	0x00020000
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_ERR_OFF	0x0000
-#define   IRQ_CAUSE_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0008
-#define   IRQ_MASK_ERR_OFF	0x000c
-#define   IRQ_MASK_LOW_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID	0x6381
-#define MV78X00_REV_Z0		1
-
-#define MV78100_DEV_ID		0x7810
-#define MV78100_REV_A0		1
-
-#define MV78200_DEV_ID		0x7820
-#define MV78200_REV_A0		1
 
 /*
  * Register Map
@@ -135,5 +104,16 @@
 
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
 
 #endif

arch/arm/mach-mv78xx0/include/mach/system.h

@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
-#include <mach/mv78xx0.h>
 
 static inline void arch_idle(void)
 {

arch/arm/mach-mv78xx0/irq.c

@@ -13,7 +13,7 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 

arch/arm/mach-netx/time.c

@@ -104,7 +104,7 @@ static struct irqaction netx_timer_irq = {
 	.handler	= netx_timer_interrupt,
 };
 
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
 {
 	return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
 }

arch/arm/mach-ns9xxx/time-ns9360.c

@@ -25,7 +25,7 @@
 #define TIMER_CLOCKEVENT 1
 static u32 latch;
 
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
 {
 	return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
 }

arch/arm/mach-omap1/time.c

@@ -198,7 +198,7 @@ static struct irqaction omap_mpu_timer2_irq = {
 	.handler	= omap_mpu_timer2_interrupt,
 };
 
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
 {
 	return ~omap_mpu_timer_read(1);
 }

arch/arm/mach-omap2/timer-gp.c

@@ -138,7 +138,7 @@ static inline void __init omap2_gp_clocksource_init(void) {}
  * clocksource
  */
 static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
 }

arch/arm/mach-orion5x/addr-map.c

@@ -57,12 +57,14 @@
 /*
  * Helpers to get DDR bank info
  */
+#define ORION5X_DDR_REG(x)	(ORION5X_DDR_VIRT_BASE | (x))
 #define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) << 3))
 #define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) << 3))
 
 /*
  * CPU Address Decode Windows registers
  */
+#define ORION5X_BRIDGE_REG(x)	(ORION5X_BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))

arch/arm/mach-orion5x/include/mach/bridge-regs.h

@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET		0x0002
+
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ		0x0008
+
+#define BRIDGE_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif

arch/arm/mach-orion5x/include/mach/entry-macro.S

@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm

arch/arm/mach-orion5x/include/mach/orion5x.h

@@ -60,6 +60,59 @@
 #define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
 #define ORION5X_PCI_MEM_SIZE		SZ_128M
 
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+
 /*******************************************************************************
  * Supported Devices & Revisions
  ******************************************************************************/
@@ -80,85 +133,4 @@
 #define MV88F6183_DEV_ID	0x6183
 #define MV88F6183_REV_B0	3
 
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
-
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
-
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
-
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
-
-#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
-
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
-
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
-
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
-#define  WDT_RESET		0x0002
-#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
-#define  WDT_INT_REQ		0x0008
-#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
-
-
 #endif

arch/arm/mach-orion5x/include/mach/system.h

@@ -11,8 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
-#include <mach/orion5x.h>
 
 static inline void arch_idle(void)
 {

arch/arm/mach-orion5x/irq.c

@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 

arch/arm/mach-orion5x/mss2-setup.c

@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-orion5x/pci.c

@@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * PCI controller
  ****************************************************************************/
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
 #define PCI_MODE		ORION5X_PCI_REG(0xd00)
 #define PCI_CMD			ORION5X_PCI_REG(0xc00)
 #define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)

arch/arm/mach-pxa/include/mach/audio.h

@@ -4,12 +4,22 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
 typedef struct {
 	int (*startup)(struct snd_pcm_substream *, void *);
 	void (*shutdown)(struct snd_pcm_substream *, void *);
 	void (*suspend)(void *);
 	void (*resume)(void *);
 	void *priv;
+	int reset_gpio;
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);

arch/arm/mach-pxa/include/mach/palmasoc.h

@@ -1,13 +1,8 @@
 #ifndef _INCLUDE_PALMASOC_H_
 #define _INCLUDE_PALMASOC_H_
+
 struct palm27x_asoc_info {
 	int	jack_gpio;
 };
 
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
 #endif

arch/arm/mach-pxa/mioa701.c

@@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
 
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+	.reset_gpio = 95,
+};
+
 /*
  * Mio global
  */
@@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/palmld.c

@@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmld_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmld_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = {
 	&palmld_backlight,
 	&palmld_leds,
 	&power_supply,
+	&palmld_asoc,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -573,11 +586,10 @@ static void __init palmld_init(void)
 
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmld_ac97_pdata);
 	pxa_set_ficp_info(&palmld_ficp_platform_data);
 	pxa_set_keypad_info(&palmld_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

arch/arm/mach-pxa/palmt5.c

@@ -420,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmt5_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmt5_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -486,6 +498,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmt5_backlight,
 	&power_supply,
+	&palmt5_asoc,
 };
 
 /* setup udc GPIOs initial state */
@@ -504,12 +517,11 @@ static void __init palmt5_init(void)
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
+	pxa_set_ac97_info(&palmt5_ac97_pdata);
 	pxa_set_udc_info(&palmt5_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-pxa/palmtx.c

@@ -40,6 +40,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -433,6 +434,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 	.batt_name	= "main-batt",
 };
 
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmtx_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmtx_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -495,6 +515,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 	&palmtx_backlight,
 	&power_supply,
+	&palmtx_asoc,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -529,8 +550,8 @@ static void __init palmtx_init(void)
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
+	pxa_set_ac97_info(&palmtx_ac97_pdata);
 	pxa_set_udc_info(&palmtx_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
 #include <linux/i2c/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= NR_BUILTIN_GPIO + 1,
+	.gpio_base	= NR_BUILTIN_GPIO,
 };
 
 static int gpio_bus_switch;
@@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
 	int ret;
 
 	if (!gpio_bus_switch) {
-		ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
-			gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+			gpio_bus_switch = NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
 		} else
 			gpio_bus_switch = -EINVAL;

arch/arm/mach-pxa/time.c

@@ -125,7 +125,7 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
 	.set_mode	= pxa_osmr0_set_mode,
 };
 
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
 {
 	return OSCR;
 }

arch/arm/mach-realview/core.c

@@ -715,7 +715,7 @@ static struct irqaction realview_timer_irq = {
 	.handler	= realview_timer_interrupt,
 };
 
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
 {
 	return ~readl(timer3_va_base + TIMER_VALUE);
 }

arch/arm/mach-versatile/core.c

@@ -948,7 +948,7 @@ static struct irqaction versatile_timer_irq = {
 	.handler	= versatile_timer_interrupt,
 };
 
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }

arch/arm/mm/proc-v6.S

@@ -10,6 +10,7 @@
  *
  *  This is the "shell" of the ARMv6 processor support.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -132,7 +133,7 @@ cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 /*
  *	__v6_setup

arch/arm/mm/proc-v7.S

@@ -9,6 +9,7 @@
  *
  *  This is the "shell" of the ARMv7 processor support.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
@@ -153,7 +154,7 @@ cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 /*
  *	__v7_setup

arch/arm/mm/tlb-v6.S

@@ -10,6 +10,7 @@
  *  ARM architecture version 6 TLB handling functions.
  *  These assume a split I/D TLB.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
@@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 	.type	v6wbi_tlb_fns, #object
 ENTRY(v6wbi_tlb_fns)

arch/arm/mm/tlb-v7.S

@@ -11,6 +11,7 @@
  *  ARM architecture version 6 TLB handling functions.
  *  These assume a split I/D TLB.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
@@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	pc, lr
 ENDPROC(v7wbi_flush_kern_tlb_range)
 
-	.section ".text.init", #alloc, #execinstr
+	__INIT
 
 	.type	v7wbi_tlb_fns, #object
 ENTRY(v7wbi_tlb_fns)

arch/arm/plat-mxc/time.c

@@ -36,7 +36,7 @@ static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
 /* clock source */
 
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(TIMER_BASE + MXC_TCN);
 }

arch/arm/plat-omap/common.c

@@ -185,7 +185,7 @@ console_initcall(omap_add_serial_console);
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
 {
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
@@ -207,7 +207,7 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read();
+	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }

arch/arm/plat-orion/time.c

@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -41,7 +41,7 @@ static u32 ticks_per_jiffy;
 /*
  * Clocksource handling.
  */
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
 {
 	return 0xffffffff - readl(TIMER0_VAL);
 }

arch/avr32/kernel/time.c

@@ -18,7 +18,7 @@
 #include <mach/pm.h>
 
 
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }

arch/blackfin/kernel/time-ts.c

@@ -58,16 +58,11 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-unsigned long long sched_clock(void)
-{
-	return cycles_2_ns(read_cycles());
-}
-
 static struct clocksource clocksource_bfin = {
 	.name		= "bfin_cycles",
 	.rating		= 350,
@@ -77,6 +72,11 @@ static struct clocksource clocksource_bfin = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+unsigned long long sched_clock(void)
+{
+	return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
 static int __init bfin_clocksource_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);

arch/frv/include/asm/bug.h

@@ -30,7 +30,7 @@ extern void __debug_bug_printk(const char *file, unsigned line);
 do {						\
 	__debug_bug_trap(signr);		\
 	asm volatile("nop");			\
-} while(0)
+} while(1)
 
 #define HAVE_ARCH_BUG
 #define BUG()					\
@@ -46,7 +46,8 @@ do {						\
 #define HAVE_ARCH_KGDB_BAD_PAGE
 #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
 #endif
-#endif
+
+#endif /* CONFIG_BUG */
 
 #include <asm-generic/bug.h>
 

arch/frv/include/asm/init.h

@@ -1,12 +0,0 @@
-#ifndef _ASM_INIT_H
-#define _ASM_INIT_H
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-/* For assembly routines */
-#define __INIT		.section	".text.init",#alloc,#execinstr
-#define __FINIT		.previous
-#define __INITDATA	.section	".data.init",#alloc,#write
-
-#endif
-

arch/frv/include/asm/unistd.h

@@ -339,10 +339,12 @@
 #define __NR_dup3		330
 #define __NR_pipe2		331
 #define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 333
+#define NR_syscalls 335
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */

arch/frv/kernel/entry.S

@@ -1525,5 +1525,7 @@ sys_call_table:
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
 syscall_table_size = (. - sys_call_table)

arch/frv/kernel/head-mmu-fr451.S

@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -31,7 +32,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################

arch/frv/kernel/head-uc-fr401.S

@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -30,7 +31,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################

arch/frv/kernel/head-uc-fr451.S

@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -30,7 +31,7 @@
 #define __400_LCR	0xfe000100
 #define __400_LSBR	0xfe000c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################

arch/frv/kernel/head-uc-fr555.S

@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/ptrace.h>
@@ -29,7 +30,7 @@
 #define __551_LCR	0xfeff1100
 #define __551_LSBR	0xfeff1c00
 
-	.section	.text.init,"ax"
+	__INIT
 	.balign		4
 
 ###############################################################################

arch/frv/kernel/head.S

@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
@@ -27,7 +28,7 @@
 #   command line string
 #
 ###############################################################################
-	.section	.text.head,"ax"
+	__HEAD
 	.balign		4
 
 	.globl		_boot, __head_reference

arch/frv/kernel/vmlinux.lds.S

@@ -26,7 +26,7 @@ SECTIONS
 
   _sinittext = .;
   .init.text : {
-	*(.text.head)
+	HEAD_TEXT
 #ifndef CONFIG_DEBUG_INFO
 	INIT_TEXT
 	EXIT_TEXT

arch/frv/mb93090-mb00/pci-vdk.c

@@ -30,6 +30,29 @@ int  __nongpreldata pcibios_last_bus = -1;
 struct pci_bus *__nongpreldata pci_root_bus;
 struct pci_ops *__nongpreldata pci_root_ops;
 
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+	.name	= "PCI IO",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+	.name	= "PCI mem",
+	.start	= 0,
+	.end	= -1,
+	.flags	= IORESOURCE_MEM,
+};
+
 /*
  * Functions for accessing PCI configuration space
  */
@@ -304,6 +327,12 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
 #endif
+
+	if (bus->number == 0) {
+		bus->resource[0] = &pci_ioport_resource;
+		bus->resource[1] = &pci_iomem_resource;
+	}
+
 	pci_read_bridge_bases(bus);
 
 	if (bus->number == 0) {
@@ -350,28 +379,36 @@ int __init pcibios_init(void)
 	/* enable PCI arbitration */
 	__reg_MB86943_pci_arbiter	= MB86943_PCIARB_EN;
 
-	ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+	pci_ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
-	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+	pci_ioport_resource.end		= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
-	ioport_resource.end	+= ioport_resource.start;
+	pci_ioport_resource.end		+= pci_ioport_resource.start;
 
 	printk("PCI IO window:  %08llx-%08llx\n",
-	       (unsigned long long) ioport_resource.start,
+	       (unsigned long long) pci_ioport_resource.start,
-	       (unsigned long long) ioport_resource.end);
+	       (unsigned long long) pci_ioport_resource.end);
 
-	iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.end		= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+	pci_iomem_resource.end		+= pci_iomem_resource.start;
 
-	/* Reserve somewhere to write to flush posted writes. */
+	/* Reserve somewhere to write to flush posted writes.  This is used by
-	iomem_resource.start += 0x400;
+	 * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
-
+	 * CPU-PCI bridge to flush as this doesn't happen automatically when a
-	iomem_resource.end	= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+	 * read is performed on the MB93090 development kit motherboard.
-	iomem_resource.end	+= iomem_resource.start;
+	 */
+	pci_iomem_resource.start	+= 0x400;
 
 	printk("PCI MEM window: %08llx-%08llx\n",
-	       (unsigned long long) iomem_resource.start,
+	       (unsigned long long) pci_iomem_resource.start,
-	       (unsigned long long) iomem_resource.end);
+	       (unsigned long long) pci_iomem_resource.end);
 	printk("PCI DMA memory: %08lx-%08lx\n",
 	       dma_coherent_mem_start, dma_coherent_mem_end);
 
+	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+		panic("Unable to insert PCI IOMEM resource\n");
+	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+		panic("Unable to insert PCI IOPORT resource\n");
+
 	if (!pci_probe)
 		return -ENXIO;
 

arch/ia64/include/asm/paravirt_privop.h

@@ -445,7 +445,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
 		register unsigned long ia64_intri_res asm ("r8");	\
 		register unsigned long __reg asm ("r8") = (reg);	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(GETREG) \
 						  + (reg))		\
@@ -464,7 +463,6 @@ paravirt_set_rr0_to_rr4(unsigned long val0, unsigned long val1,
 		register unsigned long ia64_clobber1 asm ("r8");	\
 		register unsigned long ia64_clobber2 asm ("r9");	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(SETREG) \
 						  + (reg))		\

arch/ia64/include/asm/smp.h

@@ -58,7 +58,7 @@ extern struct smp_boot_data {
 extern char no_int_routing __devinitdata;
 
 extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 extern int smp_num_siblings;
 extern void __iomem *ipi_base_addr;
 extern unsigned char smp_int_redirect;

arch/ia64/kernel/cyclone.c

@@ -21,7 +21,7 @@ void __init cyclone_setup(void)
 
 static void __iomem *cyclone_mc;
 
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
 {
 	return (cycle_t)readq((void __iomem *)cyclone_mc);
 }

arch/ia64/kernel/smp.c

@@ -225,6 +225,7 @@ smp_send_reschedule (int cpu)
 {
 	platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
 }
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
 
 /*
  * Called with preemption disabled.
@@ -300,15 +301,12 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 		return;
 	}
 
+	smp_call_function_mask(mm->cpu_vm_mask,
+		(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+	local_irq_disable();
+	local_finish_flush_tlb_mm(mm);
+	local_irq_enable();
 	preempt_enable();
-	/*
-	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
-	 * have been running in the address space.  It's not clear that this is worth the
-	 * trouble though: to avoid races, we have to raise the IPI on the target CPU
-	 * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
-	 * rather trivial.
-	 */
-	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 }
 
 void arch_send_call_function_single_ipi(int cpu)

arch/ia64/kernel/time.c

@@ -33,7 +33,7 @@
 
 #include "fsyscall_gtod_data.h"
 
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
 
 struct fsyscall_gtod_data_t fsyscall_gtod_data = {
 	.lock = SEQLOCK_UNLOCKED,
@@ -383,7 +383,7 @@ ia64_init_itm (void)
 	}
 }
 
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
 {
 	u64 lcycle, now, ret;
 

arch/ia64/kvm/kvm-ia64.c

@@ -610,20 +610,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	int r;
 
 again:
-	preempt_disable();
-	local_irq_disable();
-
 	if (signal_pending(current)) {
-		local_irq_enable();
-		preempt_enable();
 		r = -EINTR;
 		kvm_run->exit_reason = KVM_EXIT_INTR;
 		goto out;
 	}
 
+	/*
+	 * down_read() may sleep and return with interrupts enabled
+	 */
+	down_read(&vcpu->kvm->slots_lock);
+
+	preempt_disable();
+	local_irq_disable();
+
 	vcpu->guest_mode = 1;
 	kvm_guest_enter();
-	down_read(&vcpu->kvm->slots_lock);
 	r = vti_vcpu_run(vcpu, kvm_run);
 	if (r < 0) {
 		local_irq_enable();

arch/ia64/sn/kernel/sn2/timer.c

@@ -23,7 +23,7 @@
 
 extern unsigned long sn_rtc_cycles_per_second;
 
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
 {
 	return (cycle_t)readq(RTC_COUNTER_ADDR);
 }

arch/m32r/kernel/head.S

@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-.section .text.head, "ax"
+__HEAD
 	.global	start_kernel
 	.global __bss_start
 	.global _end

arch/m32r/kernel/vmlinux.lds.S

@@ -27,7 +27,7 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT

arch/m68k/configs/amiga_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
+# Linux kernel version: 2.6.30-rc3
-# Tue Dec  2 20:27:42 2008
+# Wed Apr 22 20:47:52 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ZORRO=y
 CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -184,7 +196,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3 is not set
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +407,10 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
 
@@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -577,14 +599,16 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_ARIADNE=m
+CONFIG_ARIADNE=y
-CONFIG_A2065=m
+CONFIG_A2065=y
-CONFIG_HYDRA=m
+CONFIG_HYDRA=y
-CONFIG_ZORRO8390=m
+CONFIG_ZORRO8390=y
-CONFIG_APNE=m
+CONFIG_APNE=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -609,7 +633,10 @@ CONFIG_APNE=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
 
 #
 # Serial drivers
@@ -730,6 +757,7 @@ CONFIG_A2232=m
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -821,6 +849,7 @@ CONFIG_FB_FM2=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -856,7 +885,6 @@ CONFIG_HIDRAW=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
@@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -923,6 +953,11 @@ CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
+CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -954,10 +989,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
+CONFIG_MISC_FILESYSTEMS=y
-#
-# Miscellaneous filesystems
-#
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
+CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
-CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
@@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m
 #
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y