net-tun: restructure tun_do_read for better sleep/wakeup efficiency

tun_do_read always adds current thread to wait queue, even if a packet
is ready to read. This is inefficient because both sleeper and waker
want to acquire the wait queue spin lock when packet rate is high.

We restructure the read function and use common kernel networking
routines to handle receive, sleep and wakeup. With the change
available packets are checked first before the reading thread is added
to the wait queue.

Ran performance tests with the following configuration:

 - my packet generator -> tap1 -> br0 -> tap0 -> my packet consumer
 - sender pinned to one core and receiver pinned to another core
 - sender send small UDP packets (64 bytes total) as fast as it can
 - sandy bridge cores
 - throughput are receiver side goodput numbers

The results are

baseline: 731k pkts/sec, cpu utilization at 1.50 cpus
 changed: 783k pkts/sec, cpu utilization at 1.53 cpus

The performance difference is largely determined by packet rate and
inter-cpu communication cost. For example, if the sender and
receiver are pinned to different cpu sockets, the results are

baseline: 558k pkts/sec, cpu utilization at 1.71 cpus
 changed: 690k pkts/sec, cpu utilization at 1.67 cpus

Co-authored-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xi Wang <xii@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Xi Wang 2014-05-16 15:11:48 -07:00 committed by David S. Miller
parent f98f89a010
commit 9e641bdcfa

View file

@ -498,12 +498,12 @@ static void tun_detach_all(struct net_device *dev)
for (i = 0; i < n; i++) {
tfile = rtnl_dereference(tun->tfiles[i]);
BUG_ON(!tfile);
wake_up_all(&tfile->wq.wait);
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
--tun->numqueues;
}
list_for_each_entry(tfile, &tun->disabled, next) {
wake_up_all(&tfile->wq.wait);
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
RCU_INIT_POINTER(tfile->tun, NULL);
}
BUG_ON(tun->numqueues != 0);
@ -807,8 +807,7 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
/* Notify and wake up reader process */
if (tfile->flags & TUN_FASYNC)
kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
wake_up_interruptible_poll(&tfile->wq.wait, POLLIN |
POLLRDNORM | POLLRDBAND);
tfile->socket.sk->sk_data_ready(tfile->socket.sk);
rcu_read_unlock();
return NETDEV_TX_OK;
@ -965,7 +964,7 @@ static unsigned int tun_chr_poll(struct file *file, poll_table *wait)
tun_debug(KERN_INFO, tun, "tun_chr_poll\n");
poll_wait(file, &tfile->wq.wait, wait);
poll_wait(file, sk_sleep(sk), wait);
if (!skb_queue_empty(&sk->sk_receive_queue))
mask |= POLLIN | POLLRDNORM;
@ -1330,47 +1329,26 @@ done:
static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile,
const struct iovec *iv, ssize_t len, int noblock)
{
DECLARE_WAITQUEUE(wait, current);
struct sk_buff *skb;
ssize_t ret = 0;
int peeked, err, off = 0;
tun_debug(KERN_INFO, tun, "tun_do_read\n");
if (unlikely(!noblock))
add_wait_queue(&tfile->wq.wait, &wait);
while (len) {
if (unlikely(!noblock))
current->state = TASK_INTERRUPTIBLE;
if (!len)
return ret;
/* Read frames from the queue */
if (!(skb = skb_dequeue(&tfile->socket.sk->sk_receive_queue))) {
if (noblock) {
ret = -EAGAIN;
break;
}
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
if (tun->dev->reg_state != NETREG_REGISTERED) {
ret = -EIO;
break;
}
/* Nothing to read, let's sleep */
schedule();
continue;
}
if (tun->dev->reg_state != NETREG_REGISTERED)
return -EIO;
/* Read frames from queue */
skb = __skb_recv_datagram(tfile->socket.sk, noblock ? MSG_DONTWAIT : 0,
&peeked, &off, &err);
if (skb) {
ret = tun_put_user(tun, tfile, skb, iv, len);
kfree_skb(skb);
break;
}
if (unlikely(!noblock)) {
current->state = TASK_RUNNING;
remove_wait_queue(&tfile->wq.wait, &wait);
}
} else
ret = err;
return ret;
}
@ -2199,8 +2177,8 @@ static int tun_chr_open(struct inode *inode, struct file * file)
tfile->flags = 0;
tfile->ifindex = 0;
rcu_assign_pointer(tfile->socket.wq, &tfile->wq);
init_waitqueue_head(&tfile->wq.wait);
RCU_INIT_POINTER(tfile->socket.wq, &tfile->wq);
tfile->socket.file = file;
tfile->socket.ops = &tun_socket_ops;