Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
This commit is contained in:
Linus Torvalds
commit
a2013a13e6
181 changed files with 273 additions and 240 deletions
|
|
@ -92,7 +92,7 @@ Description: The /dev/kmsg character device node provides userspace access
|
|||
The flags field carries '-' by default. A 'c' indicates a
|
||||
fragment of a line. All following fragments are flagged with
|
||||
'+'. Note, that these hints about continuation lines are not
|
||||
neccessarily correct, and the stream could be interleaved with
|
||||
necessarily correct, and the stream could be interleaved with
|
||||
unrelated messages, but merging the lines in the output
|
||||
usually produces better human readable results. A similar
|
||||
logic is used internally when messages are printed to the
|
||||
|
|
|
|||
|
|
@ -164,7 +164,7 @@ Contact: Rafael J. Wysocki <rjw@sisk.pl>
|
|||
Description:
|
||||
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
|
||||
contains the total time the device has been preventing
|
||||
opportunistic transitions to sleep states from occuring.
|
||||
opportunistic transitions to sleep states from occurring.
|
||||
This attribute is read-only. If the device is not enabled to
|
||||
wake up the system from sleep states, this attribute is not
|
||||
present.
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ Contact: xiaoyan.zhang@intel.com
|
|||
Description:
|
||||
This folder includes the attributes related with PPI (Physical
|
||||
Presence Interface). Only if TPM is supported by BIOS, this
|
||||
folder makes sence. The folder path can be got by command
|
||||
folder makes sense. The folder path can be got by command
|
||||
'find /sys/ -name 'pcrs''. For the detail information of PPI,
|
||||
please refer to the PPI specification from
|
||||
http://www.trustedcomputinggroup.org/
|
||||
|
|
|
|||
|
|
@ -1,13 +1,13 @@
|
|||
What: /sys/kernel/profile
|
||||
What: /sys/kernel/profiling
|
||||
Date: September 2008
|
||||
Contact: Dave Hansen <dave@linux.vnet.ibm.com>
|
||||
Description:
|
||||
/sys/kernel/profile is the runtime equivalent
|
||||
/sys/kernel/profiling is the runtime equivalent
|
||||
of the boot-time profile= option.
|
||||
|
||||
You can get the same effect running:
|
||||
|
||||
echo 2 > /sys/kernel/profile
|
||||
echo 2 > /sys/kernel/profiling
|
||||
|
||||
as you would by issuing profile=2 on the boot
|
||||
command line.
|
||||
|
|
|
|||
|
|
@ -462,7 +462,7 @@ Differences between the kernel community and corporate structures
|
|||
|
||||
The kernel community works differently than most traditional corporate
|
||||
development environments. Here are a list of things that you can try to
|
||||
do to try to avoid problems:
|
||||
do to avoid problems:
|
||||
Good things to say regarding your proposed changes:
|
||||
- "This solves multiple problems."
|
||||
- "This deletes 2000 lines of code."
|
||||
|
|
|
|||
|
|
@ -51,7 +51,6 @@ int dbg;
|
|||
int print_delays;
|
||||
int print_io_accounting;
|
||||
int print_task_context_switch_counts;
|
||||
__u64 stime, utime;
|
||||
|
||||
#define PRINTF(fmt, arg...) { \
|
||||
if (dbg) { \
|
||||
|
|
|
|||
|
|
@ -376,7 +376,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
|
|||
leaving the cpu domain and flushing caches at fault time. Note that all the
|
||||
dma_buf files share the same anon inode, hence the exporter needs to replace
|
||||
the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
|
||||
requred. This is because the kernel uses the underlying inode's address_space
|
||||
required. This is because the kernel uses the underlying inode's address_space
|
||||
for vma tracking (and hence pte tracking at shootdown time with
|
||||
unmap_mapping_range).
|
||||
|
||||
|
|
@ -388,7 +388,7 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
|
|||
Exporters that shoot down mappings (for any reasons) shall not do any
|
||||
synchronization at fault time with outstanding device operations.
|
||||
Synchronization is an orthogonal issue to sharing the backing storage of a
|
||||
buffer and hence should not be handled by dma-buf itself. This is explictly
|
||||
buffer and hence should not be handled by dma-buf itself. This is explicitly
|
||||
mentioned here because many people seem to want something like this, but if
|
||||
different exporters handle this differently, buffer sharing can fail in
|
||||
interesting ways depending upong the exporter (if userspace starts depending
|
||||
|
|
|
|||
|
|
@ -181,7 +181,6 @@ modversions.h*
|
|||
nconf
|
||||
ncscope.*
|
||||
offset.h
|
||||
offsets.h
|
||||
oui.c*
|
||||
page-types
|
||||
parse.c
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
Notifier error injection
|
||||
========================
|
||||
|
||||
Notifier error injection provides the ability to inject artifical errors to
|
||||
Notifier error injection provides the ability to inject artificial errors to
|
||||
specified notifier chain callbacks. It is useful to test the error handling of
|
||||
notifier call chain failures which is rarely executed. There are kernel
|
||||
modules that can be used to test the following notifiers.
|
||||
|
|
@ -14,7 +14,7 @@ modules that can be used to test the following notifiers.
|
|||
CPU notifier error injection module
|
||||
-----------------------------------
|
||||
This feature can be used to test the error handling of the CPU notifiers by
|
||||
injecting artifical errors to CPU notifier chain callbacks.
|
||||
injecting artificial errors to CPU notifier chain callbacks.
|
||||
|
||||
If the notifier call chain should be failed with some events notified, write
|
||||
the error code to debugfs interface
|
||||
|
|
|
|||
|
|
@ -108,7 +108,7 @@ the request was handled successfully.
|
|||
UHID_FEATURE_ANSWER:
|
||||
If you receive a UHID_FEATURE request you must answer with this request. You
|
||||
must copy the "id" field from the request into the answer. Set the "err" field
|
||||
to 0 if no error occured or to EIO if an I/O error occurred.
|
||||
to 0 if no error occurred or to EIO if an I/O error occurred.
|
||||
If "err" is 0 then you should fill the buffer of the answer with the results
|
||||
of the feature request and set "size" correspondingly.
|
||||
|
||||
|
|
|
|||
|
|
@ -138,7 +138,7 @@ Sysfs entries
|
|||
|
||||
When probing the chip, the driver identifies which PMBus registers are
|
||||
supported, and determines available sensors from this information.
|
||||
Attribute files only exist if respective sensors are suported by the chip.
|
||||
Attribute files only exist if respective sensors are supported by the chip.
|
||||
Labels are provided to inform the user about the sensor associated with
|
||||
a given sysfs entry.
|
||||
|
||||
|
|
|
|||
|
|
@ -133,7 +133,7 @@ number of contacts (f1 and f0 in the table below).
|
|||
|
||||
This packet only appears after a position packet with the mt bit set, and
|
||||
usually only appears when there are two or more contacts (although
|
||||
occassionally it's seen with only a single contact).
|
||||
occasionally it's seen with only a single contact).
|
||||
|
||||
The final v3 packet type is the trackstick packet.
|
||||
|
||||
|
|
|
|||
|
|
@ -470,7 +470,7 @@ build.
|
|||
|
||||
Sometimes, an external module uses exported symbols from
|
||||
another external module. kbuild needs to have full knowledge of
|
||||
all symbols to avoid spitting out warnings about undefined
|
||||
all symbols to avoid spliitting out warnings about undefined
|
||||
symbols. Three solutions exist for this situation.
|
||||
|
||||
NOTE: The method with a top-level kbuild file is recommended
|
||||
|
|
|
|||
|
|
@ -64,6 +64,8 @@ Example kernel-doc function comment:
|
|||
* comment lines.
|
||||
*
|
||||
* The longer description can have multiple paragraphs.
|
||||
*
|
||||
* Return: Describe the return value of foobar.
|
||||
*/
|
||||
|
||||
The short description following the subject can span multiple lines
|
||||
|
|
@ -78,6 +80,8 @@ If a function parameter is "..." (varargs), it should be listed in
|
|||
kernel-doc notation as:
|
||||
* @...: description
|
||||
|
||||
The return value, if any, should be described in a dedicated section
|
||||
named "Return".
|
||||
|
||||
Example kernel-doc data structure comment.
|
||||
|
||||
|
|
@ -222,6 +226,9 @@ only a "*").
|
|||
"section header:" names must be unique per function (or struct,
|
||||
union, typedef, enum).
|
||||
|
||||
Use the section header "Return" for sections describing the return value
|
||||
of a function.
|
||||
|
||||
Avoid putting a spurious blank line after the function name, or else the
|
||||
description will be repeated!
|
||||
|
||||
|
|
@ -237,21 +244,21 @@ patterns, which are highlighted appropriately.
|
|||
NOTE 1: The multi-line descriptive text you provide does *not* recognize
|
||||
line breaks, so if you try to format some text nicely, as in:
|
||||
|
||||
Return codes
|
||||
Return:
|
||||
0 - cool
|
||||
1 - invalid arg
|
||||
2 - out of memory
|
||||
|
||||
this will all run together and produce:
|
||||
|
||||
Return codes 0 - cool 1 - invalid arg 2 - out of memory
|
||||
Return: 0 - cool 1 - invalid arg 2 - out of memory
|
||||
|
||||
NOTE 2: If the descriptive text you provide has lines that begin with
|
||||
some phrase followed by a colon, each of those phrases will be taken as
|
||||
a new section heading, which means you should similarly try to avoid text
|
||||
like:
|
||||
|
||||
Return codes:
|
||||
Return:
|
||||
0: cool
|
||||
1: invalid arg
|
||||
2: out of memory
|
||||
|
|
|
|||
|
|
@ -214,7 +214,7 @@ out:
|
|||
}
|
||||
|
||||
/***************************************************************************
|
||||
* Intel Advanced Management Technolgy ME Client
|
||||
* Intel Advanced Management Technology ME Client
|
||||
***************************************************************************/
|
||||
|
||||
#define AMT_MAJOR_VERSION 1
|
||||
|
|
@ -256,7 +256,7 @@ struct amt_code_versions {
|
|||
} __attribute__((packed));
|
||||
|
||||
/***************************************************************************
|
||||
* Intel Advanced Management Technolgy Host Interface
|
||||
* Intel Advanced Management Technology Host Interface
|
||||
***************************************************************************/
|
||||
|
||||
struct amt_host_if_msg_header {
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@ Very nice card if you only have satellite TV but several tuners connected
|
|||
to the card via composite.
|
||||
|
||||
Many thanks to Matrix-Vision for giving us 2 cards for free which made
|
||||
Bt848a/Bt849 single crytal operation support possible!!!
|
||||
Bt848a/Bt849 single crystal operation support possible!!!
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ card installed, you might to check out if you can read these registers
|
|||
values used by the windows driver. A tool to do this is available
|
||||
from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
|
||||
does'nt work with bt878 boards according to some reports I received.
|
||||
Another one with bt878 suport is available from
|
||||
Another one with bt878 support is available from
|
||||
http://btwincap.sourceforge.net/Files/btspy2.00.zip
|
||||
|
||||
You might also dig around in the *.ini files of the Windows applications.
|
||||
|
|
|
|||
|
|
@ -193,7 +193,7 @@ faster.
|
|||
or maybe swap-over-nbd/NFS)?
|
||||
|
||||
No. First, the existing swap subsystem doesn't allow for any kind of
|
||||
swap hierarchy. Perhaps it could be rewritten to accomodate a hierarchy,
|
||||
swap hierarchy. Perhaps it could be rewritten to accommodate a hierarchy,
|
||||
but this would require fairly drastic changes. Even if it were
|
||||
rewritten, the existing swap subsystem uses the block I/O layer which
|
||||
assumes a swap device is fixed size and any page in it is linearly
|
||||
|
|
|
|||
|
|
@ -3596,7 +3596,7 @@ S: Maintained
|
|||
F: drivers/input/touchscreen/htcpen.c
|
||||
|
||||
HUGETLB FILESYSTEM
|
||||
M: William Irwin <wli@holomorphy.com>
|
||||
M: Nadia Yvette Chambers <nyc@holomorphy.com>
|
||||
S: Maintained
|
||||
F: fs/hugetlbfs/
|
||||
|
||||
|
|
|
|||
4
README
4
README
|
|
@ -180,6 +180,10 @@ CONFIGURING the kernel:
|
|||
with questions already answered.
|
||||
Additionally updates the dependencies.
|
||||
|
||||
"make olddefconfig"
|
||||
Like above, but sets new symbols to their default
|
||||
values without prompting.
|
||||
|
||||
"make defconfig" Create a ./.config file by using the default
|
||||
symbol values from either arch/$ARCH/defconfig
|
||||
or arch/$ARCH/configs/${PLATFORM}_defconfig,
|
||||
|
|
|
|||
|
|
@ -66,7 +66,7 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
|
|||
((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn \
|
||||
<< PAGE_SHIFT))
|
||||
|
||||
/* XXX: FIXME -- wli */
|
||||
/* XXX: FIXME -- nyc */
|
||||
#define kern_addr_valid(kaddr) (0)
|
||||
|
||||
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
|
||||
|
|
|
|||
|
|
@ -354,8 +354,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
|
|||
struct pci_dev *pdev = alpha_gendev_to_pci(dev);
|
||||
int dac_allowed;
|
||||
|
||||
if (dir == PCI_DMA_NONE)
|
||||
BUG();
|
||||
BUG_ON(dir == PCI_DMA_NONE);
|
||||
|
||||
dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
|
||||
return pci_map_single_1(pdev, (char *)page_address(page) + offset,
|
||||
|
|
@ -378,8 +377,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
|
|||
struct pci_iommu_arena *arena;
|
||||
long dma_ofs, npages;
|
||||
|
||||
if (dir == PCI_DMA_NONE)
|
||||
BUG();
|
||||
BUG_ON(dir == PCI_DMA_NONE);
|
||||
|
||||
if (dma_addr >= __direct_map_base
|
||||
&& dma_addr < __direct_map_base + __direct_map_size) {
|
||||
|
|
@ -662,8 +660,7 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
|
|||
dma_addr_t max_dma;
|
||||
int dac_allowed;
|
||||
|
||||
if (dir == PCI_DMA_NONE)
|
||||
BUG();
|
||||
BUG_ON(dir == PCI_DMA_NONE);
|
||||
|
||||
dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
|
||||
|
||||
|
|
@ -742,8 +739,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
|
|||
dma_addr_t max_dma;
|
||||
dma_addr_t fbeg, fend;
|
||||
|
||||
if (dir == PCI_DMA_NONE)
|
||||
BUG();
|
||||
BUG_ON(dir == PCI_DMA_NONE);
|
||||
|
||||
if (! alpha_mv.mv_pci_tbi)
|
||||
return;
|
||||
|
|
|
|||
|
|
@ -1598,7 +1598,7 @@ static int __init run_all_tests(void)
|
|||
{
|
||||
int ret = 0;
|
||||
|
||||
pr_info("Begining kprobe tests...\n");
|
||||
pr_info("Beginning kprobe tests...\n");
|
||||
|
||||
#ifndef CONFIG_THUMB2_KERNEL
|
||||
|
||||
|
|
|
|||
|
|
@ -136,7 +136,7 @@ int xc_request_firmware(struct xc *x)
|
|||
if (head->magic != 0x4e657458) {
|
||||
if (head->magic == 0x5874654e) {
|
||||
dev_err(x->dev,
|
||||
"firmware magic is 'XteN'. Endianess problems?\n");
|
||||
"firmware magic is 'XteN'. Endianness problems?\n");
|
||||
ret = -ENODEV;
|
||||
goto exit_release_firmware;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
|
||||
|
||||
/* 0xE0000000 contains the IO space that is split by speed and
|
||||
* wether the access is for 8 or 16bit IO... this ensures that
|
||||
* whether the access is for 8 or 16bit IO... this ensures that
|
||||
* the correct access is made
|
||||
*
|
||||
* 0x10000000 of space, partitioned as so:
|
||||
|
|
|
|||
|
|
@ -88,7 +88,7 @@ enum s3c2410_dma_state {
|
|||
*
|
||||
* This represents the state of the DMA engine, wrt to the loaded / running
|
||||
* transfers. Since we don't have any way of knowing exactly the state of
|
||||
* the DMA transfers, we need to know the state to make decisions on wether
|
||||
* the DMA transfers, we need to know the state to make decisions on whether
|
||||
* we can
|
||||
*
|
||||
* S3C2410_DMA_NONE
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@
|
|||
#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
|
||||
|
||||
/* 0xE0000000 contains the IO space that is split by speed and
|
||||
* wether the access is for 8 or 16bit IO... this ensures that
|
||||
* whether the access is for 8 or 16bit IO... this ensures that
|
||||
* the correct access is made
|
||||
*
|
||||
* 0x10000000 of space, partitioned as so:
|
||||
|
|
|
|||
|
|
@ -121,7 +121,7 @@ void s3c_pm_configure_extint(void)
|
|||
int pin;
|
||||
|
||||
/* for each of the external interrupts (EINT0..EINT15) we
|
||||
* need to check wether it is an external interrupt source,
|
||||
* need to check whether it is an external interrupt source,
|
||||
* and then configure it as an input if it is not
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ config TEGRA_AHB
|
|||
help
|
||||
Adds AHB configuration functionality for NVIDIA Tegra SoCs,
|
||||
which controls AHB bus master arbitration and some
|
||||
perfomance parameters(priority, prefech size).
|
||||
performance parameters(priority, prefech size).
|
||||
|
||||
config TEGRA_EMC_SCALING_ENABLE
|
||||
bool "Enable scaling the memory frequency"
|
||||
|
|
|
|||
|
|
@ -325,7 +325,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
|
|||
|
||||
chan->state = S3C2410_DMA_RUNNING;
|
||||
|
||||
/* check wether there is anything to load, and if not, see
|
||||
/* check whether there is anything to load, and if not, see
|
||||
* if we can find anything to load
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -56,7 +56,7 @@ config SEC_IRQ_PRIORITY_LEVELS
|
|||
default 7
|
||||
range 0 7
|
||||
help
|
||||
Devide the total number of interrupt priority levels into sub-levels.
|
||||
Divide the total number of interrupt priority levels into sub-levels.
|
||||
There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -191,7 +191,7 @@ static irqreturn_t l2_ecc_err(int irq, void *dev_id)
|
|||
{
|
||||
int status;
|
||||
|
||||
printk(KERN_ERR "L2 ecc error happend\n");
|
||||
printk(KERN_ERR "L2 ecc error happened\n");
|
||||
status = bfin_read32(L2CTL0_STAT);
|
||||
if (status & 0x1)
|
||||
printk(KERN_ERR "Core channel error type:0x%x, addr:0x%x\n",
|
||||
|
|
|
|||
|
|
@ -142,7 +142,7 @@ __asm__ ( \
|
|||
* it here, we would not get the multiple_irq at all.
|
||||
*
|
||||
* The non-blocking here is based on the knowledge that the timer interrupt is
|
||||
* registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
|
||||
* registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
|
||||
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -103,7 +103,7 @@ __asm__ ( \
|
|||
* if we had BLOCK'edit here, we would not get the multiple_irq at all.
|
||||
*
|
||||
* The non-blocking here is based on the knowledge that the timer interrupt is
|
||||
* registred as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
|
||||
* registered as a fast interrupt (IRQF_DISABLED) so that we _know_ there will not
|
||||
* be an sti() before the timer irq handler is run to acknowledge the interrupt.
|
||||
*/
|
||||
#define BUILD_TIMER_IRQ(nr, mask) \
|
||||
|
|
|
|||
|
|
@ -77,7 +77,7 @@ void __set_pmd(pmd_t *pmdptr, unsigned long pmd)
|
|||
* checks at dup_mmap(), exec(), and other mmlist addition points
|
||||
* could be used. The locking scheme was chosen on the basis of
|
||||
* manfred's recommendations and having no core impact whatsoever.
|
||||
* -- wli
|
||||
* -- nyc
|
||||
*/
|
||||
DEFINE_SPINLOCK(pgd_lock);
|
||||
struct page *pgd_list;
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* kvm_ia64.c: Basic KVM suppport On Itanium series processors
|
||||
* kvm_ia64.c: Basic KVM support On Itanium series processors
|
||||
*
|
||||
*
|
||||
* Copyright (C) 2007, Intel Corporation.
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ fp_fsqrt(struct fp_ext *dest, struct fp_ext *src)
|
|||
* sqrt(m*2^e) =
|
||||
* sqrt(2*m) * 2^(p) , if e = 2*p + 1
|
||||
*
|
||||
* So we use the last bit of the exponent to decide wether to
|
||||
* So we use the last bit of the exponent to decide whether to
|
||||
* use the m or 2*m.
|
||||
*
|
||||
* Since only the fractional part of the mantissa is stored and
|
||||
|
|
|
|||
|
|
@ -341,7 +341,7 @@ static void __devinit quirk_slc90e66_ide(struct pci_dev *dev)
|
|||
|
||||
static void __devinit tc35815_fixup(struct pci_dev *dev)
|
||||
{
|
||||
/* This device may have PM registers but not they are not suported. */
|
||||
/* This device may have PM registers but not they are not supported. */
|
||||
if (dev->pm_cap) {
|
||||
dev_info(&dev->dev, "PM disabled\n");
|
||||
dev->pm_cap = 0;
|
||||
|
|
|
|||
|
|
@ -95,7 +95,7 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
|
|||
* checks at dup_mmap(), exec(), and other mmlist addition points
|
||||
* could be used. The locking scheme was chosen on the basis of
|
||||
* manfred's recommendations and having no core impact whatsoever.
|
||||
* -- wli
|
||||
* -- nyc
|
||||
*/
|
||||
DEFINE_SPINLOCK(pgd_lock);
|
||||
struct page *pgd_list;
|
||||
|
|
|
|||
|
|
@ -146,7 +146,7 @@ config DEBUG_STACKOVERFLOW
|
|||
help
|
||||
Make extra checks for space available on stack in some
|
||||
critical functions. This will cause kernel to run a bit slower,
|
||||
but will catch most of kernel stack overruns and exit gracefuly.
|
||||
but will catch most of kernel stack overruns and exit gracefully.
|
||||
|
||||
Say Y if you are unsure.
|
||||
|
||||
|
|
|
|||
|
|
@ -34,7 +34,7 @@ struct op_system_config {
|
|||
unsigned long mmcra;
|
||||
#ifdef CONFIG_OPROFILE_CELL
|
||||
/* Register for oprofile user tool to check cell kernel profiling
|
||||
* suport.
|
||||
* support.
|
||||
*/
|
||||
unsigned long cell_support;
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
/* Note the full page bits must be in the same location as for normal
|
||||
* 4k pages as the same assembly will be used to insert 64K pages
|
||||
* wether the kernel has CONFIG_PPC_64K_PAGES or not
|
||||
* whether the kernel has CONFIG_PPC_64K_PAGES or not
|
||||
*/
|
||||
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
|
||||
#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
|
||||
|
|
|
|||
|
|
@ -132,7 +132,7 @@
|
|||
*
|
||||
* At this point, the OF driver seems to have a limitation on transfer
|
||||
* sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
|
||||
* wether this is just an OF limit due to some temporary buffer size
|
||||
* whether this is just an OF limit due to some temporary buffer size
|
||||
* or if this is an SMU imposed limit. This driver has the same limitation
|
||||
* for now as I use a 0x10 bytes temporary buffer as well
|
||||
*
|
||||
|
|
@ -236,7 +236,7 @@
|
|||
* 3 (optional): enable nmi? [0x00 or 0x01]
|
||||
*
|
||||
* Returns:
|
||||
* If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
|
||||
* If parameter 2 is 0x00 and parameter 3 is not specified, returns whether
|
||||
* NMI is enabled. Otherwise unknown.
|
||||
*/
|
||||
#define SMU_CMD_MISC_df_NMI_OPTION 0x04
|
||||
|
|
|
|||
|
|
@ -387,7 +387,7 @@ void __init find_legacy_serial_ports(void)
|
|||
of_node_put(parent);
|
||||
continue;
|
||||
}
|
||||
/* Check for known pciclass, and also check wether we have
|
||||
/* Check for known pciclass, and also check whether we have
|
||||
* a device with child nodes for ports or not
|
||||
*/
|
||||
if (of_device_is_compatible(np, "pciclass,0700") ||
|
||||
|
|
|
|||
|
|
@ -82,7 +82,7 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev)
|
|||
return -ENXIO;
|
||||
|
||||
/* Claim resources. This might need some rework as well depending
|
||||
* wether we are doing probe-only or not, like assigning unassigned
|
||||
* whether we are doing probe-only or not, like assigning unassigned
|
||||
* resources etc...
|
||||
*/
|
||||
pcibios_claim_one_bus(phb->bus);
|
||||
|
|
|
|||
|
|
@ -83,7 +83,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
|
|||
* the context). This is very important because we must ensure we
|
||||
* don't lose the VRSAVE content that may have been set prior to
|
||||
* the process doing its first vector operation
|
||||
* Userland shall check AT_HWCAP to know wether it can rely on the
|
||||
* Userland shall check AT_HWCAP to know whether it can rely on the
|
||||
* v_regs pointer or not
|
||||
*/
|
||||
#ifdef CONFIG_ALTIVEC
|
||||
|
|
|
|||
|
|
@ -722,7 +722,7 @@ void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
|
|||
}
|
||||
|
||||
/*
|
||||
* is_hugepage_only_range() is used by generic code to verify wether
|
||||
* is_hugepage_only_range() is used by generic code to verify whether
|
||||
* a normal mmap mapping (non hugetlbfs) is valid on a given area.
|
||||
*
|
||||
* until the generic code provides a more generic hook and/or starts
|
||||
|
|
|
|||
|
|
@ -526,7 +526,7 @@ EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
|
|||
|
||||
#define WDT_IDENTITY "mpc52xx watchdog on GPT0"
|
||||
|
||||
/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
|
||||
/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
|
||||
static unsigned long wdt_is_active;
|
||||
|
||||
/* wdt-capable gpt */
|
||||
|
|
|
|||
|
|
@ -728,7 +728,7 @@ static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
|
|||
nid, np->full_name);
|
||||
|
||||
/* XXX todo: If we can have multiple windows on the same IOMMU, which
|
||||
* isn't the case today, we probably want here to check wether the
|
||||
* isn't the case today, we probably want here to check whether the
|
||||
* iommu for that node is already setup.
|
||||
* However, there might be issue with getting the size right so let's
|
||||
* ignore that for now. We might want to completely get rid of the
|
||||
|
|
|
|||
|
|
@ -148,7 +148,7 @@ static int spider_set_irq_type(struct irq_data *d, unsigned int type)
|
|||
|
||||
/* Configure the source. One gross hack that was there before and
|
||||
* that I've kept around is the priority to the BE which I set to
|
||||
* be the same as the interrupt source number. I don't know wether
|
||||
* be the same as the interrupt source number. I don't know whether
|
||||
* that's supposed to make any kind of sense however, we'll have to
|
||||
* decide that, but for now, I'm not changing the behaviour.
|
||||
*/
|
||||
|
|
@ -220,7 +220,7 @@ static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc)
|
|||
/* For hooking up the cascace we have a problem. Our device-tree is
|
||||
* crap and we don't know on which BE iic interrupt we are hooked on at
|
||||
* least not the "standard" way. We can reconstitute it based on two
|
||||
* informations though: which BE node we are connected to and wether
|
||||
* informations though: which BE node we are connected to and whether
|
||||
* we are connected to IOIF0 or IOIF1. Right now, we really only care
|
||||
* about the IBM cell blade and we know that its firmware gives us an
|
||||
* interrupt-map property which is pretty strange.
|
||||
|
|
@ -232,7 +232,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
|
|||
int imaplen, intsize, unit;
|
||||
struct device_node *iic;
|
||||
|
||||
/* First, we check wether we have a real "interrupts" in the device
|
||||
/* First, we check whether we have a real "interrupts" in the device
|
||||
* tree in case the device-tree is ever fixed
|
||||
*/
|
||||
struct of_irq oirq;
|
||||
|
|
|
|||
|
|
@ -529,7 +529,7 @@ static int __init pmac_pic_probe_mpic(void)
|
|||
void __init pmac_pic_init(void)
|
||||
{
|
||||
/* We configure the OF parsing based on our oldworld vs. newworld
|
||||
* platform type and wether we were booted by BootX.
|
||||
* platform type and whether we were booted by BootX.
|
||||
*/
|
||||
#ifdef CONFIG_PPC32
|
||||
if (!pmac_newworld)
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Data Technology Inc. ESPT-GIGA board suport
|
||||
* Data Technology Inc. ESPT-GIGA board support
|
||||
*
|
||||
* Copyright (C) 2008, 2009 Renesas Solutions Corp.
|
||||
* Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
|
||||
|
|
|
|||
1
arch/x86/boot/.gitignore
vendored
1
arch/x86/boot/.gitignore
vendored
|
|
@ -2,7 +2,6 @@ bootsect
|
|||
bzImage
|
||||
cpustr.h
|
||||
mkcpustr
|
||||
offsets.h
|
||||
voffset.h
|
||||
zoffset.h
|
||||
setup
|
||||
|
|
|
|||
|
|
@ -606,7 +606,7 @@ void __init mtrr_bp_init(void)
|
|||
|
||||
/*
|
||||
* This is an AMD specific MSR, but we assume(hope?) that
|
||||
* Intel will implement it to when they extend the address
|
||||
* Intel will implement it too when they extend the address
|
||||
* bus of the Xeon.
|
||||
*/
|
||||
if (cpuid_eax(0x80000000) >= 0x80000008) {
|
||||
|
|
|
|||
|
|
@ -137,7 +137,7 @@ static void pgd_dtor(pgd_t *pgd)
|
|||
* against pageattr.c; it is the unique case in which a valid change
|
||||
* of kernel pagetables can't be lazily synchronized by vmalloc faults.
|
||||
* vmalloc faults work because attached pagetables are never freed.
|
||||
* -- wli
|
||||
* -- nyc
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_X86_PAE
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/******************************************************************************
|
||||
*
|
||||
* Module Name: dsopcode - Dispatcher suport for regions and fields
|
||||
* Module Name: dsopcode - Dispatcher support for regions and fields
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
|
|
|
|||
|
|
@ -3789,7 +3789,7 @@ static int handle_one_recv_msg(ipmi_smi_t intf,
|
|||
|
||||
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
|
||||
&& (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) {
|
||||
/* It's an asyncronous event. */
|
||||
/* It's an asynchronous event. */
|
||||
requeue = handle_read_event_rsp(intf, msg);
|
||||
} else {
|
||||
/* It's a response from the local BMC. */
|
||||
|
|
|
|||
|
|
@ -155,7 +155,7 @@ enum si_stat_indexes {
|
|||
/* Number of watchdog pretimeouts. */
|
||||
SI_STAT_watchdog_pretimeouts,
|
||||
|
||||
/* Number of asyncronous messages received. */
|
||||
/* Number of asynchronous messages received. */
|
||||
SI_STAT_incoming_messages,
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -251,12 +251,8 @@ static ssize_t pp_write (struct file * file, const char __user * buf,
|
|||
break;
|
||||
}
|
||||
|
||||
if (signal_pending (current)) {
|
||||
if (!bytes_written) {
|
||||
bytes_written = -EINTR;
|
||||
}
|
||||
if (signal_pending (current))
|
||||
break;
|
||||
}
|
||||
|
||||
cond_resched();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -985,8 +985,8 @@ ISABD00 "Racal-Interlan NP600A Ethernet 16bit"
|
|||
ISABD02 "Racal-Interlan NI5210/8 Ethernet"
|
||||
ISABD03 "Racal-Interlan NI5210/16 Ethernet"
|
||||
ISABE00 "Qua Tech PXB-1608 Parallel Expansion Board"
|
||||
ISABE01 "Qua Tech ES-100 8 Channel Asyncronous"
|
||||
ISABE02 "Qua Tech QS-100M 4 Channel Asyncronous"
|
||||
ISABE01 "Qua Tech ES-100 8 Channel Asynchronous"
|
||||
ISABE02 "Qua Tech QS-100M 4 Channel Asynchronous"
|
||||
ISABE03 "Qua Tech MXI-100 IEEE 488 GPIB"
|
||||
ISABE04 "Qua Tech DS-201 Dual Channel RS-422"
|
||||
ISABE05 "Qua Tech PXB-721 Parallel Expansion"
|
||||
|
|
|
|||
|
|
@ -149,10 +149,10 @@ static inline void __init init_ohci1394_initialize(struct ohci *ohci)
|
|||
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
|
||||
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
|
||||
|
||||
/* Accept asyncronous transfer requests from all nodes for now */
|
||||
/* Accept asynchronous transfer requests from all nodes for now */
|
||||
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
|
||||
|
||||
/* Specify asyncronous transfer retries */
|
||||
/* Specify asynchronous transfer retries */
|
||||
reg_write(ohci, OHCI1394_ATRetries,
|
||||
OHCI1394_MAX_AT_REQ_RETRIES |
|
||||
(OHCI1394_MAX_AT_RESP_RETRIES<<4) |
|
||||
|
|
|
|||
|
|
@ -1281,7 +1281,7 @@ static int at_context_queue_packet(struct context *ctx,
|
|||
d[0].res_count = cpu_to_le16(packet->timestamp);
|
||||
|
||||
/*
|
||||
* The DMA format for asyncronous link packets is different
|
||||
* The DMA format for asynchronous link packets is different
|
||||
* from the IEEE1394 layout, so shift the fields around
|
||||
* accordingly.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -504,7 +504,7 @@ config GPIO_ADNP
|
|||
help
|
||||
This option enables support for N GPIOs found on Avionic Design
|
||||
I2C GPIO expanders. The register space will be extended by powers
|
||||
of two, so the controller will need to accomodate for that. For
|
||||
of two, so the controller will need to accommodate for that. For
|
||||
example: if a controller provides 48 pins, 6 registers will be
|
||||
enough to represent all pins, but the driver will assume a
|
||||
register layout for 64 pins (8 registers).
|
||||
|
|
|
|||
|
|
@ -1650,7 +1650,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev)
|
|||
ring->wptr = 0;
|
||||
WREG32(CP_RB_WPTR, ring->wptr);
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
WREG32(CP_RB_RPTR_ADDR,
|
||||
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
|
||||
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
|
||||
|
|
|
|||
|
|
@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
|
|||
|
||||
WREG32(CP_DEBUG, (1 << 27));
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
|
||||
WREG32(SCRATCH_UMSK, 0xff);
|
||||
|
||||
|
|
@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
|
|||
#endif
|
||||
WREG32(cp_rb_cntl[i], rb_cntl);
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
|
||||
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
|
||||
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
|
||||
|
|
|
|||
|
|
@ -459,7 +459,7 @@ void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *r
|
|||
*
|
||||
* @ring: radeon_ring structure holding ring information
|
||||
*
|
||||
* Reset the driver's copy of the wtpr (all asics).
|
||||
* Reset the driver's copy of the wptr (all asics).
|
||||
*/
|
||||
void radeon_ring_undo(struct radeon_ring *ring)
|
||||
{
|
||||
|
|
@ -503,7 +503,7 @@ void radeon_ring_force_activity(struct radeon_device *rdev, struct radeon_ring *
|
|||
}
|
||||
|
||||
/**
|
||||
* radeon_ring_force_activity - update lockup variables
|
||||
* radeon_ring_lockup_update - update lockup variables
|
||||
*
|
||||
* @ring: radeon_ring structure holding ring information
|
||||
*
|
||||
|
|
|
|||
|
|
@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev)
|
|||
ring->wptr = 0;
|
||||
WREG32(CP_RB0_WPTR, ring->wptr);
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
|
||||
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
|
||||
|
||||
|
|
@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev)
|
|||
ring->wptr = 0;
|
||||
WREG32(CP_RB1_WPTR, ring->wptr);
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
|
||||
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
|
||||
|
||||
|
|
@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev)
|
|||
ring->wptr = 0;
|
||||
WREG32(CP_RB2_WPTR, ring->wptr);
|
||||
|
||||
/* set the wb address wether it's enabled or not */
|
||||
/* set the wb address whether it's enabled or not */
|
||||
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
|
||||
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
|
||||
|
||||
|
|
|
|||
|
|
@ -304,7 +304,7 @@ retry_write:
|
|||
|
||||
case STATE_READ:
|
||||
/* we have a byte of data in the data register, do
|
||||
* something with it, and then work out wether we are
|
||||
* something with it, and then work out whether we are
|
||||
* going to do any more read/write
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|||
if (msg->flags & I2C_M_REV_DIR_ADDR)
|
||||
addr ^= 1;
|
||||
|
||||
/* todo - check for wether ack wanted or not */
|
||||
/* todo - check for whether ack wanted or not */
|
||||
s3c24xx_i2c_enable_ack(i2c);
|
||||
|
||||
iiccon = readl(i2c->regs + S3C2410_IICCON);
|
||||
|
|
@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|||
|
||||
case STATE_READ:
|
||||
/* we have a byte of data in the data register, do
|
||||
* something with it, and then work out wether we are
|
||||
* something with it, and then work out whether we are
|
||||
* going to do any more read/write
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -628,7 +628,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
|
|||
if ((cs->dc.amd7930.ph_state == 8)) {
|
||||
/* b-channels off, PH-AR cleared
|
||||
* change to F3 */
|
||||
Amd7930_ph_command(cs, 0x20, "HW_RESET REQEST"); //LMR1 bit 5
|
||||
Amd7930_ph_command(cs, 0x20, "HW_RESET REQUEST"); //LMR1 bit 5
|
||||
spin_unlock_irqrestore(&cs->lock, flags);
|
||||
} else {
|
||||
Amd7930_ph_command(cs, 0x40, "HW_RESET REQUEST");
|
||||
|
|
|
|||
|
|
@ -1417,7 +1417,7 @@ modeisar(struct BCState *bcs, int mode, int bc)
|
|||
&bcs->hw.isar.reg->Flags))
|
||||
bcs->hw.isar.dpath = 1;
|
||||
else {
|
||||
printk(KERN_WARNING"isar modeisar both pathes in use\n");
|
||||
printk(KERN_WARNING"isar modeisar both paths in use\n");
|
||||
return (1);
|
||||
}
|
||||
break;
|
||||
|
|
|
|||
|
|
@ -4124,7 +4124,7 @@ static struct md_sysfs_entry md_size =
|
|||
__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
|
||||
|
||||
|
||||
/* Metdata version.
|
||||
/* Metadata version.
|
||||
* This is one of
|
||||
* 'none' for arrays with no metadata (good luck...)
|
||||
* 'external' for arrays with externally managed metadata,
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@
|
|||
* may be held at once. This is just an implementation detail.
|
||||
*
|
||||
* ii) Recursive locking attempts are detected and return EINVAL. A stack
|
||||
* trace is also emitted for the previous lock aquisition.
|
||||
* trace is also emitted for the previous lock acquisition.
|
||||
*
|
||||
* iii) Priority is given to write locks.
|
||||
*/
|
||||
|
|
@ -109,7 +109,7 @@ static int __check_holder(struct block_lock *lock)
|
|||
DMERR("previously held here:");
|
||||
print_stack_trace(lock->traces + i, 4);
|
||||
|
||||
DMERR("subsequent aquisition attempted here:");
|
||||
DMERR("subsequent acquisition attempted here:");
|
||||
t.nr_entries = 0;
|
||||
t.max_entries = MAX_STACK;
|
||||
t.entries = entries;
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ struct dm_transaction_manager;
|
|||
*/
|
||||
|
||||
/*
|
||||
* Infomation about the values stored within the btree.
|
||||
* Information about the values stored within the btree.
|
||||
*/
|
||||
struct dm_btree_value_type {
|
||||
void *context;
|
||||
|
|
|
|||
|
|
@ -1576,7 +1576,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
|
|||
* This happens in stages:
|
||||
* 1/ create a new kmem_cache and allocate the required number of
|
||||
* stripe_heads.
|
||||
* 2/ gather all the old stripe_heads and tranfer the pages across
|
||||
* 2/ gather all the old stripe_heads and transfer the pages across
|
||||
* to the new stripe_heads. This will have the side effect of
|
||||
* freezing the array as once all stripe_heads have been collected,
|
||||
* no IO will be possible. Old stripe heads are freed once their
|
||||
|
|
|
|||
|
|
@ -948,7 +948,7 @@ static int GetDeviceCapabilities(struct drxk_state *state)
|
|||
state->m_oscClockFreq = 20250;
|
||||
break;
|
||||
default:
|
||||
printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
|
||||
printk(KERN_ERR "drxk: Clock Frequency is unknown\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -371,7 +371,7 @@ static irqreturn_t emmaprp_irq(int irq_emma, void *data)
|
|||
if (!curr_ctx->aborting) {
|
||||
if ((irqst & PRP_INTR_ST_RDERR) ||
|
||||
(irqst & PRP_INTR_ST_CH2WERR)) {
|
||||
pr_err("PrP bus error ocurred, this transfer is probably corrupted\n");
|
||||
pr_err("PrP bus error occurred, this transfer is probably corrupted\n");
|
||||
writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
|
||||
} else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */
|
||||
src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx);
|
||||
|
|
|
|||
|
|
@ -138,7 +138,7 @@ VI. Setting Parameters
|
|||
|
||||
The return value is the size in bytes of the data written into
|
||||
ops->resbuf if no errors occur. If an error occurs, -1 is returned
|
||||
and errno is set appropriatly:
|
||||
and errno is set appropriately:
|
||||
|
||||
EFAULT Invalid user space pointer was passed
|
||||
ENXIO Invalid IOP number
|
||||
|
|
@ -222,7 +222,7 @@ VIII. Downloading Software
|
|||
RETURNS
|
||||
|
||||
This function returns 0 no errors occur. If an error occurs, -1
|
||||
is returned and errno is set appropriatly:
|
||||
is returned and errno is set appropriately:
|
||||
|
||||
EFAULT Invalid user space pointer was passed
|
||||
ENXIO Invalid IOP number
|
||||
|
|
@ -264,7 +264,7 @@ IX. Uploading Software
|
|||
RETURNS
|
||||
|
||||
This function returns 0 if no errors occur. If an error occurs, -1
|
||||
is returned and errno is set appropriatly:
|
||||
is returned and errno is set appropriately:
|
||||
|
||||
EFAULT Invalid user space pointer was passed
|
||||
ENXIO Invalid IOP number
|
||||
|
|
@ -301,7 +301,7 @@ X. Removing Software
|
|||
RETURNS
|
||||
|
||||
This function returns 0 if no errors occur. If an error occurs, -1
|
||||
is returned and errno is set appropriatly:
|
||||
is returned and errno is set appropriately:
|
||||
|
||||
EFAULT Invalid user space pointer was passed
|
||||
ENXIO Invalid IOP number
|
||||
|
|
@ -325,7 +325,7 @@ X. Validating Configuration
|
|||
RETURNS
|
||||
|
||||
This function returns 0 if no erro occur. If an error occurs, -1 is
|
||||
returned and errno is set appropriatly:
|
||||
returned and errno is set appropriately:
|
||||
|
||||
ETIMEDOUT Timeout waiting for reply message
|
||||
ENXIO Invalid IOP number
|
||||
|
|
@ -360,7 +360,7 @@ XI. Configuration Dialog
|
|||
RETURNS
|
||||
|
||||
This function returns 0 if no error occur. If an error occurs, -1
|
||||
is returned and errno is set appropriatly:
|
||||
is returned and errno is set appropriately:
|
||||
|
||||
EFAULT Invalid user space pointer was passed
|
||||
ENXIO Invalid IOP number
|
||||
|
|
|
|||
|
|
@ -609,7 +609,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
|
|||
u8 operation;
|
||||
|
||||
/*
|
||||
* This is to deail with the case of an application
|
||||
* This is to deal with the case of an application
|
||||
* opening a device and then the device disappears while
|
||||
* it's in use, and then the application tries to release
|
||||
* it. ex: Unmounting a deleted RAID volume at reboot.
|
||||
|
|
|
|||
|
|
@ -189,7 +189,7 @@ static int i2o_cfg_parms(unsigned long arg, unsigned int type)
|
|||
return -ENXIO;
|
||||
|
||||
/*
|
||||
* Stop users being able to try and allocate arbitary amounts
|
||||
* Stop users being able to try and allocate arbitrary amounts
|
||||
* of DMA space. 64K is way more than sufficient for this.
|
||||
*/
|
||||
if (kcmd.oplen > 65536)
|
||||
|
|
|
|||
|
|
@ -533,7 +533,7 @@ config MMC_DW_PLTFM
|
|||
If unsure, say Y.
|
||||
|
||||
config MMC_DW_EXYNOS
|
||||
tristate "Exynos specific extentions for Synopsys DW Memory Card Interface"
|
||||
tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
|
||||
depends on MMC_DW
|
||||
select MMC_DW_PLTFM
|
||||
help
|
||||
|
|
|
|||
|
|
@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev)
|
|||
|
||||
platram_setrw(info, PLATRAM_RW);
|
||||
|
||||
/* check to see if there are any available partitions, or wether
|
||||
/* check to see if there are any available partitions, or whether
|
||||
* to add this device whole */
|
||||
|
||||
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
|
||||
|
|
|
|||
|
|
@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
|
|||
if (chip->ecc.mode != NAND_ECC_HW)
|
||||
return;
|
||||
|
||||
/* change the behaviour depending on wether we are using
|
||||
/* change the behaviour depending on whether we are using
|
||||
* the large or small page nand device */
|
||||
|
||||
if (chip->page_shift > 10) {
|
||||
|
|
|
|||
|
|
@ -245,7 +245,7 @@ struct bonding {
|
|||
struct delayed_work ad_work;
|
||||
struct delayed_work mcast_work;
|
||||
#ifdef CONFIG_DEBUG_FS
|
||||
/* debugging suport via debugfs */
|
||||
/* debugging support via debugfs */
|
||||
struct dentry *debug_dir;
|
||||
#endif /* CONFIG_DEBUG_FS */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
|
|||
/*
|
||||
* ax_initial_check
|
||||
*
|
||||
* do an initial probe for the card to check wether it exists
|
||||
* do an initial probe for the card to check whether it exists
|
||||
* and is functional
|
||||
*/
|
||||
static int ax_initial_check(struct net_device *dev)
|
||||
|
|
|
|||
|
|
@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
|
|||
|
||||
if (o->next_tx_only >= o->max_cos)
|
||||
/* >= becuase tx only must always be smaller than cos since the
|
||||
* primary connection suports COS 0
|
||||
* primary connection supports COS 0
|
||||
*/
|
||||
BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
|
||||
o->next_tx_only, o->max_cos);
|
||||
|
|
|
|||
|
|
@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev,
|
|||
/* apply any specific unsupported masks here */
|
||||
switch (hw->device_id) {
|
||||
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
|
||||
/* KSP3 does not suppport UCAST wake-ups */
|
||||
/* KSP3 does not support UCAST wake-ups */
|
||||
wol->supported &= ~WAKE_UCAST;
|
||||
|
||||
if (adapter->wol & E1000_WUFC_EX)
|
||||
|
|
|
|||
|
|
@ -1267,7 +1267,7 @@ int mlx4_test_interrupts(struct mlx4_dev *dev)
|
|||
/* Temporary use polling for command completions */
|
||||
mlx4_cmd_use_polling(dev);
|
||||
|
||||
/* Map the new eq to handle all asyncronous events */
|
||||
/* Map the new eq to handle all asynchronous events */
|
||||
err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
|
||||
priv->eq_table.eq[i].eqn);
|
||||
if (err) {
|
||||
|
|
|
|||
|
|
@ -6769,7 +6769,7 @@ static int stp;
|
|||
/*
|
||||
* This enables fast aging in the KSZ8842 switch. Not sure what situation
|
||||
* needs that. However, fast aging is used to flush the dynamic MAC table when
|
||||
* STP suport is enabled.
|
||||
* STP support is enabled.
|
||||
*/
|
||||
static int fast_aging;
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ struct mcp_gen_header {
|
|||
*
|
||||
* Fields below this comment are extensions added in later versions
|
||||
* of this struct, drivers should compare the header_length against
|
||||
* offsetof(field) to check wether a given MCP implements them.
|
||||
* offsetof(field) to check whether a given MCP implements them.
|
||||
*
|
||||
* Never remove any field. Keep everything naturally align.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
|
|||
if ( mode == BCM54XX_COPPER)
|
||||
return genmii_poll_link(phy);
|
||||
|
||||
/* try to find out wether we have a link */
|
||||
/* try to find out whether we have a link */
|
||||
phy_write(phy, MII_NCONFIG, 0x2000);
|
||||
phy_reg = phy_read(phy, MII_NCONFIG);
|
||||
|
||||
|
|
@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
|
|||
|
||||
phy->speed = SPEED_1000;
|
||||
|
||||
/* find out wether we are running half- or full duplex */
|
||||
/* find out whether we are running half- or full duplex */
|
||||
phy_write(phy, MII_NCONFIG, 0x2000);
|
||||
phy_reg = phy_read(phy, MII_NCONFIG);
|
||||
|
||||
|
|
@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
|
|||
if ( mode == BCM54XX_COPPER)
|
||||
return genmii_poll_link(phy);
|
||||
|
||||
/* find out wether we have a link */
|
||||
/* find out whether we have a link */
|
||||
phy_write(phy, MII_NCONFIG, 0x7000);
|
||||
phy_reg = phy_read(phy, MII_NCONFIG);
|
||||
|
||||
|
|
@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
|
|||
|
||||
phy->speed = SPEED_1000;
|
||||
|
||||
/* find out wether we are running half- or full duplex */
|
||||
/* find out whether we are running half- or full duplex */
|
||||
phy_write(phy, MII_NCONFIG, 0x7000);
|
||||
phy_reg = phy_read(phy, MII_NCONFIG);
|
||||
|
||||
|
|
|
|||
|
|
@ -209,6 +209,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
|
|||
result = i2400m_reset(i2400m, rt);
|
||||
if (result >= 0)
|
||||
result = 0;
|
||||
break;
|
||||
default:
|
||||
result = -EINVAL;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
|
|||
ssid_el_p[1] = priv->SSID_size;
|
||||
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
|
||||
ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
|
||||
ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
|
||||
ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
|
||||
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
|
||||
|
||||
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
|
||||
|
|
|
|||
|
|
@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW
|
|||
IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
|
||||
IPW_ORD_POWER_MGMT_INDEX, //NS //
|
||||
IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
|
||||
IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
|
||||
IPW_ORD_COUNTRY_CHANNELS, // channels supported by country
|
||||
// IPW_ORD_COUNTRY_CHANNELS:
|
||||
// For 11b the lower 2-byte are used for channels from 1-14
|
||||
// and the higher 2-byte are not used.
|
||||
|
|
|
|||
|
|
@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
|
|||
if (r)
|
||||
goto out;
|
||||
/* Currently we support IEEE 802.11g for full and high speed USB.
|
||||
* It might be discussed, whether we should suppport pure b mode for
|
||||
* It might be discussed, whether we should support pure b mode for
|
||||
* full speed USB.
|
||||
*/
|
||||
r = set_mandatory_rates(chip, 1);
|
||||
|
|
|
|||
|
|
@ -773,7 +773,7 @@ static __devinit int palmas_probe(struct platform_device *pdev)
|
|||
/*
|
||||
* read and store the RANGE bit for later use
|
||||
* This must be done before regulator is probed otherwise
|
||||
* we error in probe with unsuportable ranges.
|
||||
* we error in probe with unsupportable ranges.
|
||||
*/
|
||||
if (id != PALMAS_REG_SMPS10) {
|
||||
addr = palmas_regs_info[id].vsel_addr;
|
||||
|
|
|
|||
|
|
@ -66,13 +66,13 @@ rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* We assume the firmware has the same endianess as the host */
|
||||
/* We assume the firmware has the same endianness as the host */
|
||||
# ifdef __LITTLE_ENDIAN
|
||||
if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
|
||||
# else /* BIG ENDIAN */
|
||||
if (ehdr->e_ident[EI_DATA] != ELFDATA2MSB) {
|
||||
# endif
|
||||
dev_err(dev, "Unsupported firmware endianess\n");
|
||||
dev_err(dev, "Unsupported firmware endianness\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -118,7 +118,7 @@ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
|
|||
return ret;
|
||||
}
|
||||
|
||||
/* simple check to see wether we have a isl1208 */
|
||||
/* simple check to see whether we have a isl1208 */
|
||||
static int
|
||||
isl1208_i2c_validate_client(struct i2c_client *client)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -186,7 +186,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
|
|||
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
|
||||
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
|
||||
|
||||
/* the only way to work out wether the system was mid-update
|
||||
/* the only way to work out whether the system was mid-update
|
||||
* when we read it is to check the second counter, and if it
|
||||
* is zero, then we re-try the entire read
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -1344,7 +1344,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature)
|
|||
|
||||
/*
|
||||
* Set / reset given feature.
|
||||
* Flag indicates wether to set (!=0) or the reset (=0) the feature.
|
||||
* Flag indicates whether to set (!=0) or the reset (=0) the feature.
|
||||
*/
|
||||
int
|
||||
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue