Merge branch 'v4l_for_linus' into staging/for_v3.9

* v4l_for_linus: (464 commits)
  [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures
  [media] uvcvideo: Cleanup leftovers of partial revert
  [media] uvcvideo: Return -EACCES when trying to set a read-only control
  Linux 3.8-rc3
  mm: reinstante dropped pmd_trans_splitting() check
  cred: Remove tgcred pointer from struct cred
  drm/ttm: fix fence locking in ttm_buffer_object_transfer
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  drm/prime: drop reference on imported dma-buf come from gem
  xen/netfront: improve truesize tracking
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  sctp: fix Kconfig bug in default cookie hmac selection
  EDAC: Cleanup device deregistering path
  ...

Conflicts:
	drivers/media/pci/dm1105/dm1105.c
	drivers/media/platform/soc_camera/mx2_camera.c
This commit is contained in:
Mauro Carvalho Chehab 2013-01-24 18:49:18 -02:00
commit a32f7d1ad3
1591 changed files with 9876 additions and 9096 deletions

View file

@ -116,7 +116,7 @@ my_suspend (struct pci_dev * pci_dev,
return 0; /* a negative value on error, 0 on success. */
}
static void __devexit
static void
my_remove (struct pci_dev * pci_dev)
{
my_device *my = pci_get_drvdata (pci_dev);
@ -124,7 +124,7 @@ my_remove (struct pci_dev * pci_dev)
/* Describe me. */
}
static int __devinit
static int
my_probe (struct pci_dev * pci_dev,
const struct pci_device_id * pci_id)
{
@ -157,7 +157,7 @@ my_pci_driver = {
.id_table = my_pci_device_ids,
.probe = my_probe,
.remove = __devexit_p (my_remove),
.remove = my_remove,
/* Power management functions. */
.suspend = my_suspend,

View file

@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
Following piece of code illustrates the usage of the SR-IOV API.
static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
pci_enable_sriov(dev, NR_VIRTFN);
@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
return 0;
}
static void __devexit dev_remove(struct pci_dev *dev)
static void dev_remove(struct pci_dev *dev)
{
pci_disable_sriov(dev);
@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
.name = "SR-IOV Physical Function driver",
.id_table = dev_id_table,
.probe = dev_probe,
.remove = __devexit_p(dev_remove),
.remove = dev_remove,
.suspend = dev_suspend,
.resume = dev_resume,
.shutdown = dev_shutdown,

View file

@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
initializes.
__exit Exit code. Ignored for non-modular drivers.
__devinit Device initialization code.
Identical to __init if the kernel is not compiled
with CONFIG_HOTPLUG, normal function otherwise.
__devexit The same for __exit.
Tips on when/where to use the above attributes:
o The module_init()/module_exit() functions (and all
initialization functions called _only_ from these)
@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
o Do not mark the struct pci_driver.
o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
o The probe() and remove() functions should be marked __devinit
and __devexit respectively. All initialization functions
exclusively called by the probe() routine, can be marked __devinit.
Ditto for remove() and __devexit.
o If mydriver_remove() is marked with __devexit(), then all address
references to mydriver_remove must use __devexit_p(mydriver_remove)
(in the struct pci_driver declaration for example).
__devexit_p() will generate the function name _or_ NULL if the
function will be discarded. For an example, see drivers/net/tg3.c.
o Do NOT mark a function if you are not sure which mark to use.
Better to not mark the function than mark the function wrong.

View file

@ -185,7 +185,7 @@ input driver:
.acpi_match_table ACPI_PTR(mpu3050_acpi_match),
},
.probe = mpu3050_probe,
.remove = __devexit_p(mpu3050_remove),
.remove = mpu3050_remove,
.id_table = mpu3050_ids,
};

View file

@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
clock-output-names =
...
"uart", /* 32 */
...
"end_of_list";
};
auart0: serial@8006c000 {

View file

@ -146,10 +146,6 @@ clks: ccm@53f80000 {
compatible = "fsl,imx25-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>;
clock-output-names = ...
"uart_ipg",
"uart_serial",
...;
};
uart1: serial@43f90000 {

View file

@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
clock-output-names =
...
"uart", /* 45 */
...
"end_of_list";
};
auart0: serial@8006a000 {

View file

@ -211,10 +211,6 @@ clks: ccm@020c4000 {
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
#clock-cells = <1>;
clock-output-names = ...
"uart_ipg",
"uart_serial",
...;
};
uart1: serial@02020000 {

View file

@ -1,4 +1,19 @@
GPIO line that should be set high/low to power off a device
Driver a GPIO line that can be used to turn the power off.
The driver supports both level triggered and edge triggered power off.
At driver load time, the driver will request the given gpio line and
install a pm_power_off handler. If the optional properties 'input' is
not found, the GPIO line will be driven in the inactive
state. Otherwise its configured as an input.
When the pm_power_off is called, the gpio is configured as an output,
and drive active, so triggering a level triggered power off
condition. This will also cause an inactive->active edge condition, so
triggering positive edge triggered power off. After a delay of 100ms,
the GPIO is set to inactive, thus causing an active->inactive edge,
triggering negative edge triggered power off. After another 100ms
delay the GPIO is driver active again. If the power is still on and
the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
Required properties:
- compatible : should be "gpio-poweroff".
@ -13,10 +28,9 @@ Optional properties:
property is not specified, the GPIO is initialized as an output in its
inactive state.
Examples:
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
gpios = <&gpio 4 0>;
};

View file

@ -0,0 +1,47 @@
CSR SiRFprimaII pinmux controller
Required properties:
- compatible : "sirf,prima2-pinctrl"
- reg : Address range of the pinctrl registers
- interrupts : Interrupts used by every GPIO group
- gpio-controller : Indicates this device is a GPIO controller
- interrupt-controller : Marks the device node as an interrupt controller
Optional properties:
- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
Each of these subnodes represents some desired configuration for a group of pins.
Required subnode-properties:
- sirf,pins : An array of strings. Each string contains the name of a group.
- sirf,function: A string containing the name of the function to mux to the
group.
Valid values for group and function names can be found from looking at the
group and function arrays in driver files:
drivers/pinctrl/pinctrl-sirf.c
For example, pinctrl might have subnodes like the following:
uart2_pins_a: uart2@0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2@1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
For a specific board, if it wants to use uart2 without hardware flow control,
it can add the following to its board-specific .dts file.
uart2: uart@0xb0070000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_noflow_pins_a>;
}

View file

@ -0,0 +1,10 @@
Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
Required properties:
compatible = "ti,twl4030-wdt";
Example:
watchdog {
compatible = "ti,twl4030-wdt";
};

View file

@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
static int usb_hcd_nxp_probe(struct platform_device *pdev)
{
(...)
struct i2c_adapter *i2c_adap;

View file

@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
The maximum number of bytes which may be used by packets
queued for each unresolved address by other network layers.
(added in linux 3.3)
Seting negative value is meaningless and will retrun error.
Setting negative value is meaningless and will return error.
Default: 65536 Bytes(64KB)
neigh/default/unres_qlen - INTEGER
@ -215,7 +215,7 @@ tcp_ecn - INTEGER
Possible values are:
0 Disable ECN. Neither initiate nor accept ECN.
1 Always request ECN on outgoing connection attempts.
2 Enable ECN when requested by incomming connections
2 Enable ECN when requested by incoming connections
but do not request ECN on outgoing connections.
Default: 2
@ -503,7 +503,7 @@ tcp_fastopen - INTEGER
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
will be retransmitted. Should not be higher than 255. Default value
is 6, which corresponds to 63seconds till the last restransmission
is 6, which corresponds to 63seconds till the last retransmission
with the current initial RTO of 1second. With this the final timeout
for an active TCP connection attempt will happen after 127seconds.
@ -1331,6 +1331,12 @@ force_tllao - BOOLEAN
race condition where the sender deletes the cached link-layer address
prior to receiving a response to a previous solicitation."
ndisc_notify - BOOLEAN
Define mode for notification of address and device changes.
0 - (default): do nothing
1 - Generate unsolicited neighbour advertisements when device is brought
up or hardware address changes.
icmp/*:
ratelimit - INTEGER
Limit the maximal rates for sending ICMPv6 packets.
@ -1530,7 +1536,7 @@ cookie_hmac_alg - STRING
* sha1
* none
Ability to assign md5 or sha1 as the selected alg is predicated on the
configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
CONFIG_CRYPTO_SHA1).
Default: Dependent on configuration. MD5 if available, else SHA1 if
@ -1548,7 +1554,7 @@ rcvbuf_policy - INTEGER
blocking.
1: rcvbuf space is per association
0: recbuf space is per socket
0: rcvbuf space is per socket
Default: 0

View file

@ -642,12 +642,13 @@ out the following operations:
* During system suspend it calls pm_runtime_get_noresume() and
pm_runtime_barrier() for every device right before executing the
subsystem-level .suspend() callback for it. In addition to that it calls
pm_runtime_disable() for every device right after executing the
subsystem-level .suspend() callback for it.
__pm_runtime_disable() with 'false' as the second argument for every device
right before executing the subsystem-level .suspend_late() callback for it.
* During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
for every device right before and right after executing the subsystem-level
.resume() callback for it, respectively.
for every device right after executing the subsystem-level .resume_early()
callback and right after executing the subsystem-level .resume() callback
for it, respectively.
7. Generic subsystem callbacks

View file

@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
return 0;
}
static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
{
dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
}
@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
.id_table = rpmsg_driver_sample_id_table,
.probe = rpmsg_sample_probe,
.callback = rpmsg_sample_cb,
.remove = __devexit_p(rpmsg_sample_remove),
.remove = rpmsg_sample_remove,
};
static int __init init(void)

View file

@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
},
.probe = CHIP_probe,
.remove = __devexit_p(CHIP_remove),
.remove = CHIP_remove,
.suspend = CHIP_suspend,
.resume = CHIP_resume,
};
@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP". Your probe() code
might look like this unless you're creating a device which is managing
a bus (appearing under /sys/class/spi_master).
static int __devinit CHIP_probe(struct spi_device *spi)
static int CHIP_probe(struct spi_device *spi)
{
struct CHIP *chip;
struct CHIP_platform_data *pdata;

View file

@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
- l2cr [ PPC only ]
- modprobe ==> Documentation/debugging-modules.txt
- modules_disabled
- msg_next_id [ sysv ipc ]
- msgmax
- msgmnb
- msgmni
@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
- rtsig-max
- rtsig-nr
- sem
- sem_next_id [ sysv ipc ]
- sg-big-buff [ generic SCSI device (sg) ]
- shm_next_id [ sysv ipc ]
- shm_rmid_forced
- shmall
- shmmax [ sysv ipc ]
@ -320,6 +323,22 @@ to false.
==============================================================
msg_next_id, sem_next_id, and shm_next_id:
These three toggles allows to specify desired id for next allocated IPC
object: message, semaphore or shared memory respectively.
By default they are equal to -1, which means generic allocation logic.
Possible values to set are in range {0..INT_MAX}.
Notes:
1) kernel doesn't guarantee, that new object will have desired id. So,
it's up to userspace, how to handle an object with "wrong" id.
2) Toggle with non-default value will be set back to -1 by kernel after
successful IPC object allocation.
==============================================================
nmi_watchdog:
Enables/Disables the NMI watchdog on x86 systems. When the value is
@ -542,6 +561,19 @@ are doing anyway :)
==============================================================
shmall:
This parameter sets the total amount of shared memory pages that
can be used system wide. Hence, SHMALL should always be at least
ceil(shmmax/PAGE_SIZE).
If you are not sure what the default PAGE_SIZE is on your Linux
system, you can run the following command:
# getconf PAGE_SIZE
==============================================================
shmmax:
This value can be used to query and set the run time limit

View file

@ -173,8 +173,7 @@ The recommended approach is as follows:
static atomic_t drv_instance = ATOMIC_INIT(0);
static int __devinit drv_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
...
state->instance = atomic_inc_return(&drv_instance) - 1;

View file

@ -182,8 +182,7 @@ int iterate(void *p)
static atomic_t drv_instance = ATOMIC_INIT(0);
static int __devinit drv_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
...
state->instance = atomic_inc_return(&drv_instance) - 1;

View file

@ -449,6 +449,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/char/agp/
F: include/linux/agp*
F: include/uapi/linux/agp*
AHA152X SCSI DRIVER
M: "Juergen E. Fischer" <fischer@norbit.de>
@ -609,6 +610,7 @@ M: Jiri Kosina <jkosina@suse.cz>
S: Odd fixes
F: arch/x86/kernel/apm_32.c
F: include/linux/apm_bios.h
F: include/uapi/linux/apm_bios.h
F: drivers/char/apm-emulation.c
APPLE BCM5974 MULTITOUCH DRIVER
@ -1025,7 +1027,6 @@ F: drivers/mmc/host/msm_sdcc.c
F: drivers/mmc/host/msm_sdcc.h
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/platform/msm/
F: drivers/*/pm8???-*
F: include/linux/mfd/pm8xxx/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
@ -1089,7 +1090,6 @@ M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/common/time-acorn.c
F: arch/arm/include/asm/hardware/entry-macro-iomd.S
F: arch/arm/include/asm/hardware/ioc.h
F: arch/arm/include/asm/hardware/iomd.h
@ -1114,7 +1114,6 @@ W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
F: arch/arm/plat-s5p/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
F: drivers/*/*s3c2410*
@ -1153,7 +1152,6 @@ M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: arch/arm/plat-s5p/dev-fimc*
F: arch/arm/plat-samsung/include/plat/*fimc*
F: drivers/media/platform/s5p-fimc/
@ -1164,7 +1162,7 @@ M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
F: arch/arm/plat-s5p/dev-mfc.c
F: arch/arm/plat-samsung/s5p-dev-mfc.c
F: drivers/media/platform/s5p-mfc/
ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT
@ -1282,7 +1280,7 @@ F: drivers/video/vt8500lcdfb.*
F: drivers/video/wm8505fb*
F: drivers/video/wmt_ge_rops.*
F: drivers/tty/serial/vt8500_serial.c
F: drivers/rtc/rtc-vt8500-c
F: drivers/rtc/rtc-vt8500.c
F: drivers/mmc/host/wmt-sdmmc.c
ARM/ZIPIT Z2 SUPPORT
@ -1424,6 +1422,7 @@ W: http://linux-atm.sourceforge.net
S: Maintained
F: drivers/atm/
F: include/linux/atm*
F: include/uapi/linux/atm*
ATMEL AT91 / AT32 MCI DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
@ -1442,7 +1441,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/dma/at_hdmac.c
F: drivers/dma/at_hdmac_regs.h
F: arch/arm/mach-at91/include/mach/at_hdmac.h
F: include/linux/platform_data/dma-atmel.h
ATMEL ISI DRIVER
M: Josh Wu <josh.wu@atmel.com>
@ -1503,6 +1502,7 @@ W: http://people.redhat.com/sgrubb/audit/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
S: Maintained
F: include/linux/audit.h
F: include/uapi/linux/audit.h
F: kernel/audit*
AUXILIARY DISPLAY DRIVERS
@ -1533,7 +1533,7 @@ M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: include/linux/ax25.h
F: include/uapi/linux/ax25.h
F: include/net/ax25.h
F: net/ax25/
@ -1602,7 +1602,7 @@ M: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
S: Maintained
F: Documentation/filesystems/bfs.txt
F: fs/bfs/
F: include/linux/bfs_fs.h
F: include/uapi/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
M: Mike Frysinger <vapier@gentoo.org>
@ -1699,7 +1699,7 @@ L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
F: drivers/net/bonding/
F: include/linux/if_bonding.h
F: include/uapi/linux/if_bonding.h
BROADCOM B44 10/100 ETHERNET DRIVER
M: Gary Zambrano <zambrano@broadcom.com>
@ -1778,6 +1778,7 @@ L: linux-scsi@vger.kernel.org
S: Supported
F: block/bsg.c
F: include/linux/bsg.h
F: include/uapi/linux/bsg.h
BT87X AUDIO DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
@ -1856,7 +1857,7 @@ L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/caif/
F: drivers/net/caif/
F: include/linux/caif/
F: include/uapi/linux/caif/
F: include/net/caif/
F: net/caif/
@ -1877,11 +1878,11 @@ W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
S: Maintained
F: net/can/
F: include/linux/can.h
F: include/linux/can/core.h
F: include/linux/can/bcm.h
F: include/linux/can/raw.h
F: include/linux/can/gw.h
F: include/uapi/linux/can.h
F: include/uapi/linux/can/bcm.h
F: include/uapi/linux/can/raw.h
F: include/uapi/linux/can/gw.h
CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
@ -1892,15 +1893,16 @@ T: git git://gitorious.org/linux-can/linux-can-next.git
S: Maintained
F: drivers/net/can/
F: include/linux/can/dev.h
F: include/linux/can/error.h
F: include/linux/can/netlink.h
F: include/linux/can/platform/
F: include/uapi/linux/can/error.h
F: include/uapi/linux/can/netlink.h
CAPABILITIES
M: Serge Hallyn <serge.hallyn@canonical.com>
L: linux-security-module@vger.kernel.org
S: Supported
F: include/linux/capability.h
F: include/uapi/linux/capability.h
F: security/capability.c
F: security/commoncap.c
F: kernel/capability.c
@ -1913,6 +1915,7 @@ W: http://www.ibm.com/developerworks/power/cell/
S: Supported
F: arch/powerpc/include/asm/cell*.h
F: arch/powerpc/include/asm/spu*.h
F: arch/powerpc/include/uapi/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
@ -1961,7 +1964,7 @@ W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/uapi/linux/nl80211.h
F: include/net/cfg80211.h
F: net/wireless/*
X: net/wireless/wext*
@ -2064,6 +2067,7 @@ S: Maintained
F: Documentation/filesystems/coda.txt
F: fs/coda/
F: include/linux/coda*.h
F: include/uapi/linux/coda*.h
COMMON CLK FRAMEWORK
M: Mike Turquette <mturquette@linaro.org>
@ -2327,6 +2331,7 @@ W: http://www.cyclades.com/
S: Orphan
F: drivers/tty/cyclades.c
F: include/linux/cyclades.h
F: include/uapi/linux/cyclades.h
CYCLADES PC300 DRIVER
W: http://www.cyclades.com/
@ -2384,6 +2389,7 @@ L: dccp@vger.kernel.org
W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
S: Maintained
F: include/linux/dccp.h
F: include/uapi/linux/dccp.h
F: include/linux/tfrc.h
F: net/dccp/
@ -2410,7 +2416,7 @@ M: Massimo Dal Zotto <dz@debian.org>
W: http://www.debian.org/~dz/i8k/
S: Maintained
F: drivers/char/i8k.c
F: include/linux/i8k.h
F: include/uapi/linux/i8k.h
DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
M: Doug Warzecha <Douglas_Warzecha@dell.com>
@ -2483,6 +2489,7 @@ S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
F: include/linux/quota*.h
F: include/uapi/linux/quota*.h
DISPLAYLINK USB 2.0 FRAMEBUFFER DRIVER (UDLFB)
M: Bernie Thompson <bernie@plugable.com>
@ -2589,6 +2596,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
F: include/drm/
F: include/uapi/drm/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
@ -2598,6 +2606,7 @@ T: git git://people.freedesktop.org/~danvet/drm-intel
S: Supported
F: drivers/gpu/drm/i915
F: include/drm/i915*
F: include/uapi/drm/i915*
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
@ -2609,6 +2618,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
F: include/uapi/drm/exynos*
DRM DRIVERS FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@avionic-design.de>
@ -2790,6 +2800,7 @@ L: netfilter-devel@vger.kernel.org
W: http://ebtables.sourceforge.net/
S: Maintained
F: include/linux/netfilter_bridge/ebt_*.h
F: include/uapi/linux/netfilter_bridge/ebt_*.h
F: net/bridge/netfilter/ebt*.c
EC100 MEDIA DRIVER
@ -3001,12 +3012,6 @@ M: Maxim Levitsky <maximlevitsky@gmail.com>
S: Maintained
F: drivers/media/rc/ene_ir.*
EPSON 1355 FRAMEBUFFER DRIVER
M: Christopher Hoover <ch@murgatroid.com>
M: Christopher Hoover <ch@hpl.hp.com>
S: Maintained
F: drivers/video/epson1355fb.c
EPSON S1D13XXX FRAMEBUFFER DRIVER
M: Kristoffer Ericson <kristoffer.ericson@gmail.com>
S: Maintained
@ -3119,6 +3124,7 @@ M: Eric Paris <eparis@redhat.com>
S: Maintained
F: fs/notify/fanotify/
F: include/linux/fanotify.h
F: include/uapi/linux/fanotify.h
FARSYNC SYNCHRONOUS DRIVER
M: Kevin Curtis <kevin.curtis@farsite.co.uk>
@ -3142,6 +3148,7 @@ F: drivers/scsi/fcoe/
F: include/scsi/fc/
F: include/scsi/libfc.h
F: include/scsi/libfcoe.h
F: include/uapi/scsi/fc/
FILE LOCKING (flock() and fcntl()/lockf())
M: Matthew Wilcox <matthew@wil.cx>
@ -3149,6 +3156,8 @@ L: linux-fsdevel@vger.kernel.org
S: Maintained
F: include/linux/fcntl.h
F: include/linux/fs.h
F: include/uapi/linux/fcntl.h
F: include/uapi/linux/fs.h
F: fs/fcntl.c
F: fs/locks.c
@ -3238,6 +3247,8 @@ F: Documentation/devicetree/bindings/fb/
F: drivers/video/
F: include/video/
F: include/linux/fb.h
F: include/uapi/video/
F: include/uapi/linux/fb.h
FREESCALE DIU FRAMEBUFFER DRIVER
M: Timur Tabi <timur@freescale.com>
@ -3264,7 +3275,7 @@ M: Sascha Hauer <kernel@pengutronix.de>
L: linux-fbdev@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/plat-mxc/include/mach/imxfb.h
F: include/linux/platform_data/video-imxfb.h
F: drivers/video/imxfb.c
FREESCALE SOC FS_ENET DRIVER
@ -3341,6 +3352,16 @@ F: Documentation/filesystems/caching/
F: fs/fscache/
F: include/linux/fscache*.h
F2FS FILE SYSTEM
M: Jaegeuk Kim <jaegeuk.kim@samsung.com>
L: linux-f2fs-devel@lists.sourceforge.net
W: http://en.wikipedia.org/wiki/F2FS
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
S: Maintained
F: Documentation/filesystems/f2fs.txt
F: fs/f2fs/
F: include/linux/f2fs_fs.h
FUJITSU FR-V (FRV) PORT
M: David Howells <dhowells@redhat.com>
S: Maintained
@ -3372,7 +3393,7 @@ L: fuse-devel@lists.sourceforge.net
W: http://fuse.sourceforge.net/
S: Maintained
F: fs/fuse/
F: include/linux/fuse.h
F: include/uapi/linux/fuse.h
FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
M: Rik Faith <faith@cs.unc.edu>
@ -3427,6 +3448,7 @@ L: linux-arch@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
S: Maintained
F: include/asm-generic
F: include/uapi/asm-generic
GENERIC UIO DRIVER FOR PCI DEVICES
M: "Michael S. Tsirkin" <mst@redhat.com>
@ -3443,7 +3465,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw.git
S: Supported
F: Documentation/filesystems/gfs2*.txt
F: fs/gfs2/
F: include/linux/gfs2_ondisk.h
F: include/uapi/linux/gfs2_ondisk.h
GIGASET ISDN DRIVERS
M: Hansjoerg Lipp <hjlipp@web.de>
@ -3453,7 +3475,7 @@ W: http://gigaset307x.sourceforge.net/
S: Maintained
F: Documentation/isdn/README.gigaset
F: drivers/isdn/gigaset/
F: include/linux/gigaset_dev.h
F: include/uapi/linux/gigaset_dev.h
GPIO SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
@ -3610,6 +3632,7 @@ S: Supported
F: Documentation/scsi/hpsa.txt
F: drivers/scsi/hpsa*.[ch]
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
M: Mike Miller <mike.miller@hp.com>
@ -3618,6 +3641,7 @@ S: Supported
F: Documentation/blockdev/cciss.txt
F: drivers/block/cciss*
F: include/linux/cciss_ioctl.h
F: include/uapi/linux/cciss_ioctl.h
HFS FILESYSTEM
L: linux-fsdevel@vger.kernel.org
@ -3652,6 +3676,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
F: drivers/hid/
F: include/linux/hid*
F: include/uapi/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
M: Thomas Gleixner <tglx@linutronix.de>
@ -3683,7 +3708,7 @@ M: Jes Sorensen <jes@trained-monkey.org>
L: linux-hippi@sunsite.dk
S: Maintained
F: include/linux/hippidevice.h
F: include/linux/if_hippi.h
F: include/uapi/linux/if_hippi.h
F: net/802/hippi.c
F: drivers/net/hippi/
@ -3711,6 +3736,7 @@ S: Maintained
F: Documentation/timers/hpet.txt
F: drivers/char/hpet.c
F: include/linux/hpet.h
F: include/uapi/linux/hpet.h
HPET: x86
M: "Venkatesh Pallipadi (Venki)" <venki@google.com>
@ -3811,6 +3837,8 @@ F: Documentation/i2c/
F: drivers/i2c/
F: include/linux/i2c.h
F: include/linux/i2c-*.h
F: include/uapi/linux/i2c.h
F: include/uapi/linux/i2c-*.h
I2C-TAOS-EVM DRIVER
M: Jean Delvare <khali@linux-fr.org>
@ -3926,7 +3954,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
F: net/mac802154/
F: drivers/ieee802154/
F: drivers/net/ieee802154/
IGUANAWORKS USB IR TRANSCEIVER
M: Sean Young <sean@mess.org>
@ -3977,7 +4005,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
F: Documentation/infiniband/
F: drivers/infiniband/
F: include/linux/if_infiniband.h
F: include/uapi/linux/if_infiniband.h
INOTIFY
M: John McCutchan <john@johnmccutchan.com>
@ -3987,6 +4015,7 @@ S: Maintained
F: Documentation/filesystems/inotify.txt
F: fs/notify/inotify/
F: include/linux/inotify.h
F: include/uapi/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
@ -3997,6 +4026,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
F: drivers/input/
F: include/linux/input.h
F: include/uapi/linux/input.h
F: include/linux/input/
INPUT MULTITOUCH (MT) PROTOCOL
@ -4017,7 +4047,6 @@ L: linux-scsi@vger.kernel.org
T: git git://git.code.sf.net/p/intel-sas/isci
S: Supported
F: drivers/scsi/isci/
F: firmware/isci/
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
@ -4112,12 +4141,6 @@ F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
F: drivers/net/ethernet/intel/
INTEL MRST PMU DRIVER
M: Len Brown <len.brown@intel.com>
L: linux-pm@vger.kernel.org
S: Supported
F: arch/x86/platform/mrst/pmu.*
INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
M: Stanislav Yakovlev <stas.yakovlev@gmail.com>
L: linux-wireless@vger.kernel.org
@ -4146,7 +4169,7 @@ S: Supported
W: http://linuxwimax.org
F: Documentation/wimax/README.i2400m
F: drivers/net/wimax/i2400m/
F: include/linux/wimax/i2400m.h
F: include/uapi/linux/wimax/i2400m.h
INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
M: Stanislaw Gruszka <sgruszka@redhat.com>
@ -4168,9 +4191,9 @@ INTEL MANAGEMENT ENGINE (mei)
M: Tomas Winkler <tomas.winkler@intel.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: include/linux/mei.h
F: include/uapi/linux/mei.h
F: drivers/misc/mei/*
F: Documentation/mei/*
F: Documentation/misc-devices/mei/*
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
@ -4210,6 +4233,7 @@ S: Supported
F: Documentation/IPMI.txt
F: drivers/char/ipmi/
F: include/linux/ipmi*
F: include/uapi/linux/ipmi*
IPS SCSI RAID DRIVER
M: Adaptec OEM Raid Solutions <aacraid@adaptec.com>
@ -4227,7 +4251,7 @@ L: lvs-devel@vger.kernel.org
S: Maintained
F: Documentation/networking/ipvs-sysctl.txt
F: include/net/ip_vs.h
F: include/linux/ip_vs.h
F: include/uapi/linux/ip_vs.h
F: net/netfilter/ipvs/
IPWIRELESS DRIVER
@ -4240,8 +4264,8 @@ IPX NETWORK LAYER
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/ipx.h
F: include/net/ipx.h
F: include/uapi/linux/ipx.h
F: net/ipx/
IRDA SUBSYSTEM
@ -4312,6 +4336,8 @@ F: Documentation/isdn/
F: drivers/isdn/
F: include/linux/isdn.h
F: include/linux/isdn/
F: include/uapi/linux/isdn.h
F: include/uapi/linux/isdn/
ISDN SUBSYSTEM (Eicon active card driver)
M: Armin Schindler <mac@melware.de>
@ -4352,7 +4378,7 @@ W: http://www.ivtvdriver.org
S: Maintained
F: Documentation/video4linux/*.ivtv
F: drivers/media/pci/ivtv/
F: include/linux/ivtv*
F: include/uapi/linux/ivtv*
IX2505V MEDIA DRIVER
M: Malcolm Priestley <tvboxspy@gmail.com>
@ -4390,7 +4416,7 @@ L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
F: fs/jffs2/
F: include/linux/jffs2.h
F: include/uapi/linux/jffs2.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
M: Andrew Morton <akpm@linux-foundation.org>
@ -4481,11 +4507,13 @@ W: http://nfs.sourceforge.net/
S: Supported
F: fs/nfsd/
F: include/linux/nfsd/
F: include/uapi/linux/nfsd/
F: fs/lockd/
F: fs/nfs_common/
F: net/sunrpc/
F: include/linux/lockd/
F: include/linux/sunrpc/
F: include/uapi/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
M: Marcelo Tosatti <mtosatti@redhat.com>
@ -4497,6 +4525,7 @@ F: Documentation/*/kvm.txt
F: arch/*/kvm/
F: arch/*/include/asm/kvm*
F: include/linux/kvm*
F: include/uapi/linux/kvm*
F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
@ -4543,6 +4572,7 @@ W: http://kernel.org/pub/linux/utils/kernel/kexec/
L: kexec@lists.infradead.org
S: Maintained
F: include/linux/kexec.h
F: include/uapi/linux/kexec.h
F: kernel/kexec.c
KEYS/KEYRINGS:
@ -4784,6 +4814,7 @@ LLC (802.2)
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
S: Maintained
F: include/linux/llc.h
F: include/uapi/linux/llc.h
F: include/net/llc*
F: net/llc/
@ -5011,7 +5042,7 @@ MATROX FRAMEBUFFER DRIVER
L: linux-fbdev@vger.kernel.org
S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
F: include/uapi/linux/matroxfb.h
MAX16065 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
@ -5109,7 +5140,7 @@ T: git git://git.infradead.org/mtd-2.6.git
S: Maintained
F: drivers/mtd/
F: include/linux/mtd/
F: include/mtd/
F: include/uapi/mtd/
MICROBLAZE ARCHITECTURE
M: Michal Simek <monstr@monstr.eu>
@ -5155,12 +5186,6 @@ F: Documentation/video4linux/meye.txt
F: drivers/media/pci/meye/
F: include/uapi/linux/meye.h
MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
M: Pavel Pisa <ppisa@pikron.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/mmc/host/imxmmc.*
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
@ -5231,6 +5256,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
F: include/uapi/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
S: Orphan
@ -5331,6 +5357,8 @@ S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
F: include/net/netfilter/
F: include/uapi/linux/netfilter*
F: include/uapi/linux/netfilter/
F: net/*/netfilter.c
F: net/*/netfilter/
F: net/netfilter/
@ -5349,8 +5377,8 @@ M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: include/linux/netrom.h
F: include/net/netrom.h
F: include/uapi/linux/netrom.h
F: net/netrom/
NETWORK BLOCK DEVICE (NBD)
@ -5359,6 +5387,7 @@ S: Maintained
F: Documentation/blockdev/nbd.txt
F: drivers/block/nbd.c
F: include/linux/nbd.h
F: include/uapi/linux/nbd.h
NETWORK DROP MONITOR
M: Neil Horman <nhorman@tuxdriver.com>
@ -5380,6 +5409,9 @@ F: include/net/
F: include/linux/in.h
F: include/linux/net.h
F: include/linux/netdevice.h
F: include/uapi/linux/in.h
F: include/uapi/linux/net.h
F: include/uapi/linux/netdevice.h
NETWORKING [IPv4/IPv6]
M: "David S. Miller" <davem@davemloft.net>
@ -5425,6 +5457,7 @@ F: net/rfkill/
F: net/wireless/
F: include/net/ieee80211*
F: include/linux/wireless.h
F: include/uapi/linux/wireless.h
F: include/net/iw_handler.h
F: drivers/net/wireless/
@ -5444,6 +5477,8 @@ F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
F: include/linux/hippidevice.h
F: include/linux/inetdevice.h
F: include/uapi/linux/if_*
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
M: Sony Chacko <sony.chacko@qlogic.com>
@ -5461,8 +5496,8 @@ L: linux-wireless@vger.kernel.org
L: linux-nfc@lists.01.org (moderated for non-subscribers)
S: Maintained
F: net/nfc/
F: include/linux/nfc.h
F: include/net/nfc/
F: include/uapi/linux/nfc.h
F: drivers/nfc/
F: include/linux/platform_data/pn544.h
@ -5479,6 +5514,8 @@ F: net/sunrpc/
F: include/linux/lockd/
F: include/linux/nfs*
F: include/linux/sunrpc/
F: include/uapi/linux/nfs*
F: include/uapi/linux/sunrpc/
NI5010 NETWORK DRIVER
M: Jan-Pascal van Best <janpascal@vanbest.org>
@ -5540,6 +5577,15 @@ F: arch/arm/*omap*/
F: drivers/i2c/busses/i2c-omap.c
F: include/linux/i2c-omap.h
OMAP DEVICE TREE SUPPORT
M: Benoît Cousson <b-cousson@ti.com>
M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/*omap*
F: arch/arm/boot/dts/*am3*
OMAP CLOCK FRAMEWORK SUPPORT
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
@ -5659,6 +5705,7 @@ M: Harald Welte <laforge@gnumonks.org>
S: Maintained
F: drivers/char/pcmcia/cm4000_cs.c
F: include/linux/cm4000_cs.h
F: include/uapi/linux/cm4000_cs.h
OMNIKEY CARDMAN 4040 DRIVER
M: Harald Welte <laforge@gnumonks.org>
@ -5817,7 +5864,7 @@ S: Orphan
F: drivers/parport/
F: include/linux/parport*.h
F: drivers/char/ppdev.c
F: include/linux/ppdev.h
F: include/uapi/linux/ppdev.h
PARAVIRT_OPS INTERFACE
M: Jeremy Fitzhardinge <jeremy@goop.org>
@ -5958,11 +6005,11 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: kernel/events/*
F: include/linux/perf_event.h
F: include/uapi/linux/perf_event.h
F: arch/*/kernel/perf_event*.c
F: arch/*/kernel/*/perf_event*.c
F: arch/*/kernel/*/*/perf_event*.c
F: arch/*/include/asm/perf_event.h
F: arch/*/lib/perf_event*.c
F: arch/*/kernel/perf_callchain.c
F: tools/perf/
@ -5971,6 +6018,7 @@ M: Christoph Hellwig <hch@infradead.org>
L: linux-abi-devel@lists.sourceforge.net
S: Maintained
F: include/linux/personality.h
F: include/uapi/linux/personality.h
PHONET PROTOCOL
M: Remi Denis-Courmont <courmisch@gmail.com>
@ -5978,6 +6026,7 @@ S: Supported
F: Documentation/networking/phonet.txt
F: include/linux/phonet.h
F: include/net/phonet/
F: include/uapi/linux/phonet.h
F: net/phonet/
PHRAM MTD DRIVER
@ -6026,6 +6075,7 @@ M: Jiri Kosina <jkosina@suse.cz>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
F: include/uapi/linux/pktcdvd.h
PKUNITY SOC DRIVERS
M: Guan Xuetao <gxt@mprc.pku.edu.cn>
@ -6100,7 +6150,7 @@ PPP OVER ATM (RFC 2364)
M: Mitchell Blank Jr <mitch@sfgoth.com>
S: Maintained
F: net/atm/pppoatm.c
F: include/linux/atmppp.h
F: include/uapi/linux/atmppp.h
PPP OVER ETHERNET
M: Michal Ostrowski <mostrows@earthlink.net>
@ -6113,6 +6163,7 @@ M: James Chapman <jchapman@katalix.com>
S: Maintained
F: net/l2tp/l2tp_ppp.c
F: include/linux/if_pppol2tp.h
F: include/uapi/linux/if_pppol2tp.h
PPS SUPPORT
M: Rodolfo Giometti <giometti@enneenne.com>
@ -6210,6 +6261,7 @@ F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
F: include/linux/regset.h
F: include/linux/tracehook.h
F: include/uapi/linux/ptrace.h
F: kernel/ptrace.c
PVRUSB2 VIDEO4LINUX DRIVER
@ -6238,7 +6290,6 @@ T: git git://gitorious.org/linux-pwm/linux-pwm.git
F: Documentation/pwm.txt
F: Documentation/devicetree/bindings/pwm/
F: include/linux/pwm.h
F: include/linux/of_pwm.h
F: drivers/pwm/
F: drivers/video/backlight/pwm_bl.c
F: include/linux/pwm_backlight.h
@ -6334,8 +6385,8 @@ M: Anders Larsen <al@alarsen.net>
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
F: fs/qnx4/
F: include/linux/qnx4_fs.h
F: include/linux/qnxtypes.h
F: include/uapi/linux/qnx4_fs.h
F: include/uapi/linux/qnxtypes.h
QT1010 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
@ -6377,7 +6428,7 @@ M: Benjamin Herrenschmidt <benh@kernel.crashing.org>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/aty/radeon*
F: include/linux/radeonfb.h
F: include/uapi/linux/radeonfb.h
RADIOSHARK RADIO DRIVER
M: Hans de Goede <hdegoede@redhat.com>
@ -6478,6 +6529,7 @@ S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
F: include/linux/rtc.h
F: include/uapi/linux/rtc.h
REISERFS FILE SYSTEM
L: reiserfs-devel@vger.kernel.org
@ -6532,8 +6584,8 @@ M: Ralf Baechle <ralf@linux-mips.org>
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
F: include/linux/rose.h
F: include/net/rose.h
F: include/uapi/linux/rose.h
F: net/rose/
RTL2830 MEDIA DRIVER
@ -6717,6 +6769,8 @@ S: Supported
F: include/linux/clocksource.h
F: include/linux/time.h
F: include/linux/timex.h
F: include/uapi/linux/time.h
F: include/uapi/linux/timex.h
F: kernel/time/clocksource.c
F: kernel/time/time*.c
F: kernel/time/ntp.c
@ -6741,6 +6795,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
F: kernel/sched/
F: include/linux/sched.h
F: include/uapi/linux/sched.h
SCORE ARCHITECTURE
M: Chen Liqin <liqin.chen@sunplusct.com>
@ -6894,7 +6949,7 @@ SENSABLE PHANTOM
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
F: drivers/misc/phantom.c
F: include/linux/phantom.h
F: include/uapi/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
M: Jeff Garzik <jgarzik@pobox.com>
@ -7184,6 +7239,7 @@ L: linux-raid@vger.kernel.org
S: Supported
F: drivers/md/
F: include/linux/raid/
F: include/uapi/linux/raid/
SONIC NETWORK DRIVER
M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
@ -7224,6 +7280,7 @@ T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
F: Documentation/sound/
F: include/sound/
F: include/uapi/sound/
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@ -7324,6 +7381,7 @@ S: Maintained
F: Documentation/spi/
F: drivers/spi/
F: include/linux/spi/
F: include/uapi/linux/spi/
SPIDERNET NETWORK DRIVER for CELL
M: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
@ -7460,7 +7518,7 @@ F: drivers/staging/rtl8712/
STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER
M: Teddy Wang <teddy.wang@siliconmotion.com.cn>
S: Odd Fixes
F: drivers/staging/sm7xx/
F: drivers/staging/sm7xxfb/
STAGING - SOFTLOGIC 6x10 MPEG CODEC
M: Ben Collins <bcollins@bluecherry.net>
@ -7586,8 +7644,8 @@ TC CLASSIFIER
M: Jamal Hadi Salim <jhs@mojatatu.com>
L: netdev@vger.kernel.org
S: Maintained
F: include/linux/pkt_cls.h
F: include/net/pkt_cls.h
F: include/uapi/linux/pkt_cls.h
F: net/sched/
TCP LOW PRIORITY MODULE
@ -7703,6 +7761,7 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/team/
F: include/linux/if_team.h
F: include/uapi/linux/if_team.h
TECHNOTREND USB IR RECEIVER
M: Sean Young <sean@mess.org>
@ -7801,7 +7860,7 @@ L: netdev@vger.kernel.org (core kernel code)
L: tipc-discussion@lists.sourceforge.net (user apps, general discussion)
W: http://tipc.sourceforge.net/
S: Maintained
F: include/linux/tipc*.h
F: include/uapi/linux/tipc*.h
F: net/tipc/
TILE ARCHITECTURE
@ -7851,6 +7910,7 @@ W: http://www.buzzard.org.uk/toshiba/
S: Maintained
F: drivers/char/toshiba.c
F: include/linux/toshiba.h
F: include/uapi/linux/toshiba.h
TMIO MMC DRIVER
M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
@ -7918,6 +7978,9 @@ F: drivers/tty/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/serial.h
F: include/linux/tty.h
F: include/uapi/linux/serial_core.h
F: include/uapi/linux/serial.h
F: include/uapi/linux/tty.h
TUA9001 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
@ -7997,7 +8060,7 @@ M: David Herrmann <dh.herrmann@googlemail.com>
L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/uhid.c
F: include/linux/uhid.h
F: include/uapi/linux/uhid.h
ULTRA-WIDEBAND (UWB) SUBSYSTEM:
L: linux-usb@vger.kernel.org
@ -8026,6 +8089,7 @@ S: Maintained
F: Documentation/cdrom/
F: drivers/cdrom/cdrom.c
F: include/linux/cdrom.h
F: include/uapi/linux/cdrom.h
UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
M: Vinayak Holikatti <vinholikatti@gmail.com>
@ -8043,7 +8107,7 @@ T: git git://git.infradead.org/ubi-2.6.git
S: Maintained
F: drivers/mtd/ubi/
F: include/linux/mtd/ubi.h
F: include/mtd/ubi-user.h
F: include/uapi/mtd/ubi-user.h
UNSORTED BLOCK IMAGES (UBI) Fastmap
M: Richard Weinberger <richard@nod.at>
@ -8077,7 +8141,7 @@ M: Oliver Neukum <oliver@neukum.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/net/usb/cdc_*.c
F: include/linux/usb/cdc.h
F: include/uapi/linux/usb/cdc.h
USB CYPRESS C67X00 DRIVER
M: Peter Korsgaard <jacmet@sunsite.dk>
@ -8406,6 +8470,7 @@ S: Maintained
F: Documentation/vfio.txt
F: drivers/vfio/
F: include/linux/vfio.h
F: include/uapi/linux/vfio.h
VIDEOBUF2 FRAMEWORK
M: Pawel Osciak <pawel@osciak.com>
@ -8422,6 +8487,7 @@ L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
F: include/linux/virtio_console.h
F: include/uapi/linux/virtio_console.h
VIRTIO CORE, NET AND BLOCK DRIVERS
M: Rusty Russell <rusty@rustcorp.com.au>
@ -8440,7 +8506,7 @@ L: virtualization@lists.linux-foundation.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/vhost/
F: include/linux/vhost.h
F: include/uapi/linux/vhost.h
VIA RHINE NETWORK DRIVER
M: Roger Luethi <rl@hellgate.ch>
@ -8588,6 +8654,7 @@ S: Maintained
F: Documentation/watchdog/
F: drivers/watchdog/
F: include/linux/watchdog.h
F: include/uapi/linux/watchdog.h
WD7000 SCSI DRIVER
M: Miroslav Zagorac <zaga@fly.cc.fer.hr>
@ -8613,9 +8680,9 @@ L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
F: Documentation/wimax/README.wimax
F: include/linux/wimax.h
F: include/linux/wimax/debug.h
F: include/net/wimax.h
F: include/uapi/linux/wimax.h
F: net/wimax/
WISTRON LAPTOP BUTTON DRIVER
@ -8733,6 +8800,7 @@ F: drivers/*/xen-*front.c
F: drivers/xen/
F: arch/x86/include/asm/xen/
F: include/xen/
F: include/uapi/xen/
XEN HYPERVISOR ARM
M: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc3
NAME = Terrified Chipmunk
# *DOCUMENTATION*

View file

@ -9,8 +9,8 @@
#ifndef _ASM_AXP_PARPORT_H
#define _ASM_AXP_PARPORT_H 1
static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
static int parport_pc_find_isa_ports (int autoirq, int autodma);
static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
{
return parport_pc_find_isa_ports (autoirq, autodma);
}

View file

@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose;
* Quirks.
*/
static void __devinit quirk_isa_bridge(struct pci_dev *dev)
static void quirk_isa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_ISA << 8;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
static void __devinit quirk_cypress(struct pci_dev *dev)
static void quirk_cypress(struct pci_dev *dev)
{
/* The Notorious Cy82C693 chip. */
@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
/* Called for each device after PCI setup is done. */
static void __devinit pcibios_fixup_final(struct pci_dev *dev)
static void pcibios_fixup_final(struct pci_dev *dev)
{
unsigned int class = dev->class >> 8;
@ -198,8 +198,7 @@ subsys_initcall(pcibios_init);
#ifdef ALPHA_RESTORE_SRM_SETUP
static struct pdev_srm_saved_conf *srm_saved_configs;
void __devinit
pdev_save_srm_config(struct pci_dev *dev)
void pdev_save_srm_config(struct pci_dev *dev)
{
struct pdev_srm_saved_conf *tmp;
static int printed = 0;
@ -241,8 +240,7 @@ pci_restore_srm_config(void)
}
#endif
void __devinit
pcibios_fixup_bus(struct pci_bus *bus)
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev = bus->self;

View file

@ -68,7 +68,7 @@ enum ipi_message_type {
};
/* Set to a secondary's cpuid when it comes online. */
static int smp_secondary_alive __devinitdata = 0;
static int smp_secondary_alive = 0;
int smp_num_probed; /* Internal processor count */
int smp_num_cpus = 1; /* Number that came online. */
@ -172,7 +172,7 @@ smp_callin(void)
}
/* Wait until hwrpb->txrdy is clear for cpu. Return -1 on timeout. */
static int __devinit
static int
wait_for_txrdy (unsigned long cpumask)
{
unsigned long timeout;
@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus)
smp_num_cpus = smp_num_probed;
}
void __devinit
void
smp_prepare_boot_cpu(void)
{
}

View file

@ -303,7 +303,7 @@ titan_late_init(void)
}
static int __devinit
static int
titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u8 intline;

View file

@ -371,7 +371,6 @@ config ARCH_CNS3XXX
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select COMMON_CLK
@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
config ARM_ERRATA_458693
bool "ARM errata: Processor deadlock when a false hazard is created"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 458693 Cortex-A8 (r2p0)
erratum. For very specific sequences of memory operations, it is
@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
config ARM_ERRATA_460075
bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 460075 Cortex-A8 (r2p0)
erratum. Any asynchronous access to the L2 cache may encounter a
@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
config ARM_ERRATA_742230
bool "ARM errata: DMB operation may be faulty"
depends on CPU_V7 && SMP
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 742230 Cortex-A9
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
config ARM_ERRATA_742231
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
depends on CPU_V7 && SMP
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 742231 Cortex-A9
(r2p0..r2p2) erratum. Under certain conditions, specific to the
@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 743622 Cortex-A9
(r2p*) erratum. Under very rare conditions, a faulty
@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the

View file

@ -50,17 +50,19 @@
ranges;
serial@d0012000 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <4>;
status = "disabled";
};
serial@d0012100 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <4>;
status = "disabled";
};

View file

@ -34,7 +34,14 @@
reg = <0>;
clocks = <&cpuclk 0>;
};
}
cpu@1 {
device_type = "cpu";
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
};
};
soc {
pinctrl {

View file

@ -85,5 +85,13 @@
#interrupts-cells = <2>;
interrupts = <24>;
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
};
};

View file

@ -100,5 +100,13 @@
#interrupts-cells = <2>;
interrupts = <24>;
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
};
};

View file

@ -42,17 +42,19 @@
soc {
serial@d0012200 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <4>;
status = "disabled";
};
serial@d0012300 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <4>;
status = "disabled";
};
@ -93,14 +95,6 @@
status = "disabled";
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
xor@d0060900 {
compatible = "marvell,orion-xor";
reg = <0xd0060900 0x100

View file

@ -170,7 +170,9 @@
gpio-bank = <8>;
};
pinctrl {
pinctrl@80157000 {
// This is actually the PRCMU base address
reg = <0x80157000 0x2000>;
compatible = "stericsson,nmk_pinctrl";
};

View file

@ -117,6 +117,7 @@
pinctrl: pinctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x10>;
clocks = <&gate_clk 22>;
};
spi0: spi@10600 {

View file

@ -32,6 +32,7 @@
cpu@0 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -39,6 +40,7 @@
cpu@1 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <1>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -46,6 +48,7 @@
cpu@2 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <2>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -53,6 +56,7 @@
cpu@3 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <3>;
clocks = <&a9pll>;
clock-names = "cpu";

View file

@ -26,7 +26,7 @@
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
sdhci@12530000 {

View file

@ -574,7 +574,7 @@
hdmi {
compatible = "samsung,exynos5-hdmi";
reg = <0x14530000 0x100000>;
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
};

View file

@ -21,7 +21,7 @@
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
};
spi {

View file

@ -30,33 +30,37 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu@900 {
compatible = "arm,cortex-a9";
reg = <0>;
device_type = "cpu";
reg = <0x900>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@1 {
cpu@901 {
compatible = "arm,cortex-a9";
reg = <1>;
device_type = "cpu";
reg = <0x901>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@2 {
cpu@902 {
compatible = "arm,cortex-a9";
reg = <2>;
device_type = "cpu";
reg = <0x902>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@3 {
cpu@903 {
compatible = "arm,cortex-a9";
reg = <3>;
device_type = "cpu";
reg = <0x903>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";

View file

@ -39,17 +39,17 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
led_pin_gpio0_17: led_gpio0_17@0 {
led_pin_gpio2_1: led_gpio2_1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@ -110,7 +110,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio0_17>;
pinctrl-0 = <&led_pin_gpio2_1>;
user {
label = "green";

View file

@ -14,7 +14,7 @@
/ {
model = "Buglabs i.MX31 Bug 1.x";
compatible = "fsl,imx31-bug", "fsl,imx31";
compatible = "buglabs,imx31-bug", "fsl,imx31";
memory {
reg = <0x80000000 0x8000000>; /* 128M */

View file

@ -492,7 +492,7 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks 158>, <&clks 157>;
clocks = <&clks 87>, <&clks 86>;
clock-names = "ipg", "per";
status = "disabled";
};

View file

@ -39,6 +39,7 @@
#size-cells = <0>;
interrupts = <32>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
status = "disabled";
};
};

View file

@ -82,4 +82,21 @@
gpios = <&gpio1 16 1>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
sata0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 4 0>;
};
};
};

View file

@ -144,6 +144,7 @@
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
clocks = <&gate_clk 3>;
status = "okay";
};

View file

@ -19,6 +19,10 @@
interrupts = <11>;
};
watchdog {
compatible = "ti,twl4030-wdt";
};
vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;

View file

@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
* %-EINVAL no platform data passed
* %0 successful.
*/
static int __devinit
__sa1111_probe(struct device *me, struct resource *mem, int irq)
static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
{
struct sa1111_platform_data *pd = me->platform_data;
struct sa1111 *sachip;
@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
#define sa1111_resume NULL
#endif
static int __devinit sa1111_probe(struct platform_device *pdev)
static int sa1111_probe(struct platform_device *pdev)
{
struct resource *mem;
int irq;

View file

@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
#define scoop_resume NULL
#endif
static int __devinit scoop_probe(struct platform_device *pdev)
static int scoop_probe(struct platform_device *pdev)
{
struct scoop_dev *devptr;
struct scoop_config *inf;
@ -243,7 +243,7 @@ err_ioremap:
return ret;
}
static int __devexit scoop_remove(struct platform_device *pdev)
static int scoop_remove(struct platform_device *pdev)
{
struct scoop_dev *sdev = platform_get_drvdata(pdev);
int ret;
@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)
static struct platform_driver scoop_driver = {
.probe = scoop_probe,
.remove = __devexit_p(scoop_remove),
.remove = scoop_remove,
.suspend = scoop_suspend,
.resume = scoop_resume,
.driver = {

View file

@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
struct device_node *node)
{
struct vic_device *v;
int i;
if (vic_id >= ARRAY_SIZE(vic_devices)) {
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
vic_id++;
v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
&vic_irqdomain_ops, v);
/* create an IRQ mapping for each valid IRQ */
for (i = 0; i < fls(valid_sources); i++)
if (valid_sources & (1 << i))
irq_create_mapping(v->domain, i);
}
static void vic_ack_irq(struct irq_data *d)
@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
return -EIO;
/*
* Passing -1 as first IRQ makes the simple domain allocate descriptors
* Passing 0 as first IRQ makes the simple domain allocate descriptors
*/
__vic_init(regs, -1, ~0, ~0, node);
__vic_init(regs, 0, ~0, ~0, node);
return 0;
}

View file

@ -6,6 +6,7 @@ CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_SMP=y

View file

@ -33,9 +33,7 @@ CONFIG_MVNETA=y
CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_MV64XXX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_USB_SUPPORT is not set

View file

@ -65,6 +65,8 @@ CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
@ -132,9 +134,11 @@ CONFIG_POWER_SUPPLY=y
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@ -170,6 +174,7 @@ CONFIG_SND_DEBUG=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_USB=y
CONFIG_USB_DEBUG=y

View file

@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
* Bug 3 is responsible for the sound DMA grinding to a halt. We now
* live with bug 2.
*/
static void __devinit pci_fixup_83c553(struct pci_dev *dev)
static void pci_fixup_83c553(struct pci_dev *dev)
{
/*
* Set memory region to start at address 0, and enable IO
@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
static void __devinit pci_fixup_unassign(struct pci_dev *dev)
static void pci_fixup_unassign(struct pci_dev *dev)
{
dev->resource[0].end -= dev->resource[0].start;
dev->resource[0].start = 0;
@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
* if it is the host bridge by marking it as such. These resources are of
* no consequence to the PCI layer (they are handled elsewhere).
*/
static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
static void pci_fixup_dec21285(struct pci_dev *dev)
{
int i;
@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
/*
* PCI IDE controllers use non-standard I/O port decoding, respect it.
*/
static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
static void pci_fixup_ide_bases(struct pci_dev *dev)
{
struct resource *r;
int i;
@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
/*
* Put the DEC21142 to sleep
*/
static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
static void pci_fixup_dec21142(struct pci_dev *dev)
{
pci_write_config_dword(dev, 0x40, 0x80000000);
}
@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
* functional. However, The CY82C693U _does not work_ in bus
* master mode without locking the PCI bus solid.
*/
static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
static void pci_fixup_cy82c693(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
u32 base0, base1;
@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
static void __devinit pci_fixup_it8152(struct pci_dev *dev)
static void pci_fixup_it8152(struct pci_dev *dev)
{
int i;
/* fixup for ITE 8152 devices */
@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
#endif
/*
* Swizzle the device pin each time we cross a bridge. If a platform does
@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
* PCI standard swizzle is implemented on plug-in cards and Cardbus based
* PCI extenders, so it can not be ignored.
*/
static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
{
struct pci_sys_data *sys = dev->sysdata;
int slot, oldpin = *pin;

View file

@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
.fops = &etb_fops,
};
static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
static int etb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
static struct kobj_attribute trace_mode_attr =
__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
static int etm_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;

View file

@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
return 0;
}
static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
int cpu;
for_each_possible_cpu(cpu) {
@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
/*
* PMU platform driver and devicetree bindings.
*/
static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
static struct of_device_id cpu_pmu_of_device_ids[] = {
{.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init},
{.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init},
{.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init},
@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
{},
};
static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
static struct platform_device_id cpu_pmu_plat_device_ids[] = {
{.name = "arm-pmu"},
{},
};
@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
/*
* CPU PMU identification and probing.
*/
static int __devinit probe_current_pmu(struct arm_pmu *pmu)
static int probe_current_pmu(struct arm_pmu *pmu)
{
int cpu = get_cpu();
unsigned long cpuid = read_cpuid_id();
@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
return ret;
}
static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
static int cpu_pmu_device_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
int (*init_fn)(struct arm_pmu *);

View file

@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
&armv6_perf_cache_map, 0xFF);
}
static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
static int armv6pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "v6";
cpu_pmu->handle_irq = armv6pmu_handle_irq;
@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
&armv6mpcore_perf_cache_map, 0xFF);
}
static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "v6mpcore";
cpu_pmu->handle_irq = armv6pmu_handle_irq;

View file

@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
cpu_pmu->max_period = (1LLU << 32) - 1;
};
static u32 __devinit armv7_read_num_pmnc_events(void)
static u32 armv7_read_num_pmnc_events(void)
{
u32 nb_cnt;
@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
return nb_cnt + 1;
}
static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A8";
@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A9";
@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A5";
@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A15";
@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A7";

View file

@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
&xscale_perf_cache_map, 0xFF);
}
static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "xscale1";
cpu_pmu->handle_irq = xscale1pmu_handle_irq;
@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
}
}
static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "xscale2";
cpu_pmu->handle_irq = xscale2pmu_handle_irq;

View file

@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client,
return 0;
}
static int __devexit cpld_video_remove(struct i2c_client *client)
static int cpld_video_remove(struct i2c_client *client)
{
cpld_client = NULL;
return 0;

View file

@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
return 0;
}
static int __devexit cdce_remove(struct i2c_client *client)
static int cdce_remove(struct i2c_client *client)
{
cdce_i2c_client = NULL;
return 0;
@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
.name = "cdce949",
},
.probe = cdce_probe,
.remove = __devexit_p(cdce_remove),
.remove = cdce_remove,
.id_table = cdce_id,
};

View file

@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = {
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.

View file

@ -74,6 +74,8 @@ config SOC_EXYNOS5440
depends on ARCH_EXYNOS5
select ARM_ARCH_TIMER
select AUTO_ZRELADDR
select PINCTRL
select PINCTRL_EXYNOS5440
help
Enable EXYNOS5440 SoC support

View file

@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
/* EXYNOS5440 can support only common clock framework */
if (soc_is_exynos5440())
return;
#ifdef CONFIG_SOC_EXYNOS5250
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
exynos5_register_clocks();
exynos5_setup_clocks();
#endif
}
#define COMBINER_ENABLE_SET 0x0

View file

@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
static void highbank_power_off(void)
{
hignbank_set_pwr_shutdown();
highbank_set_pwr_shutdown();
while (1)
cpu_do_idle();

View file

@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
highbank_set_cpu_jump(cpu, secondary_startup);
highbank_set_cpu_jump(cpu, phys_to_virt(0));
highbank_set_core_pwr();
cpu_do_idle();

View file

@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
}
@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
if (scu_base_addr)
scu_enable(scu_base_addr);
/*
* Write the address of secondary startup into the jump table
* The cores are in wfi and wait until they receive a soft interrupt
* and a non-zero value to jump to. Then the secondary CPU branches
* to this address.
*/
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
struct smp_operations highbank_smp_ops __initdata = {

View file

@ -14,10 +14,12 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/cpu_pm.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
@ -26,16 +28,31 @@
static int highbank_suspend_finish(unsigned long val)
{
outer_flush_all();
outer_disable();
highbank_set_pwr_suspend();
cpu_do_idle();
highbank_clear_pwr_request();
return 0;
}
static int highbank_pm_enter(suspend_state_t state)
{
hignbank_set_pwr_suspend();
cpu_pm_enter();
cpu_cluster_pm_enter();
highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
highbank_smc1(0x102, 0x1);
if (scu_base_addr)
scu_enable(scu_base_addr);
return 0;
}

View file

@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
}
static inline void hignbank_set_pwr_suspend(void)
static inline void highbank_clear_core_pwr(void)
{
int cpu = cpu_logical_map(smp_processor_id());
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
else
writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
}
static inline void highbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_shutdown(void)
static inline void highbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_soft_reset(void)
static inline void highbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_hard_reset(void)
static inline void highbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void highbank_clear_pwr_request(void)
{
writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_clear_core_pwr();
}
#endif

View file

@ -22,9 +22,9 @@
void highbank_restart(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
highbank_set_pwr_hard_reset();
else
hignbank_set_pwr_soft_reset();
highbank_set_pwr_soft_reset();
while (1)
cpu_do_idle();

View file

@ -841,8 +841,6 @@ config SOC_IMX6Q
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420

View file

@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = {
.name = "imx",
};
static int __devinit mxc_cpufreq_driver_init(void)
static int mxc_cpufreq_driver_init(void)
{
return cpufreq_register_driver(&mxc_driver);
}

View file

@ -21,7 +21,7 @@
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
static int __devinit imx_mmdc_probe(struct platform_device *pdev)
static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
void __iomem *mmdc_base, *reg;

View file

@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
*/
struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
{
int which_atu;
struct pci_bus *bus = NULL;

View file

@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
}
static void __init kirkwood_of_clk_init(void)

View file

@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
0
};
#define TOPKICK_SATA0_PWR_ENABLE 36
void __init usi_topkick_init(void)
{
/*
@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
*/
kirkwood_mpp_conf(topkick_mpp_config);
/* SATA0 power enable */
gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
kirkwood_ge00_init(&topkick_ge00_data);
kirkwood_sdio_init(&topkick_mvsdio_data);

View file

@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
* PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
* the device. Decoding setup is handled by the orion code.
*/
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;

View file

@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
},
};
static void __devinit acs5k_i2c_init(void)
static void acs5k_i2c_init(void)
{
/* The gpio interface */
platform_device_register(&acs5k_i2c_device);

View file

@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name)
}
EXPORT_SYMBOL(sram_get_gpool);
static int __devinit sram_probe(struct platform_device *pdev)
static int sram_probe(struct platform_device *pdev)
{
struct sram_platdata *pdata = pdev->dev.platform_data;
struct sram_bank_info *info;
@ -125,7 +125,7 @@ out:
return ret;
}
static int __devexit sram_remove(struct platform_device *pdev)
static int sram_remove(struct platform_device *pdev)
{
struct sram_bank_info *info;

View file

@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
* and unknown state. This function should be called early to
* wait on the ARM9.
*/
void __devinit proc_comm_boot_wait(void)
void proc_comm_boot_wait(void)
{
void __iomem *base = MSM_SHARED_RAM_BASE;

View file

@ -988,7 +988,7 @@ int smd_core_init(void)
return 0;
}
static int __devinit msm_smd_probe(struct platform_device *pdev)
static int msm_smd_probe(struct platform_device *pdev)
{
/*
* If we haven't waited for the ARM9 to boot up till now,

View file

@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = {
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.

View file

@ -27,7 +27,6 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <linux/platform_data/mtd-nomadik-nand.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>

View file

@ -22,49 +22,49 @@
#include <mach/hardware.h>
#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
#define IRQ_WATCHDOG 1
#define IRQ_SOFTINT 2
#define IRQ_CRYPTO 3
#define IRQ_OWM 4
#define IRQ_MTU0 5
#define IRQ_MTU1 6
#define IRQ_GPIO0 7
#define IRQ_GPIO1 8
#define IRQ_GPIO2 9
#define IRQ_GPIO3 10
#define IRQ_RTC_RTT 11
#define IRQ_SSP 12
#define IRQ_UART0 13
#define IRQ_DMA1 14
#define IRQ_CLCD_MDIF 15
#define IRQ_DMA0 16
#define IRQ_PWRFAIL 17
#define IRQ_UART1 18
#define IRQ_FIRDA 19
#define IRQ_MSP0 20
#define IRQ_I2C0 21
#define IRQ_I2C1 22
#define IRQ_SDMMC 23
#define IRQ_USBOTG 24
#define IRQ_SVA_IT0 25
#define IRQ_SVA_IT1 26
#define IRQ_SAA_IT0 27
#define IRQ_SAA_IT1 28
#define IRQ_UART2 29
#define IRQ_MSP2 30
#define IRQ_L2CC 49
#define IRQ_HPI 50
#define IRQ_SKE 51
#define IRQ_KP 52
#define IRQ_MEMST 55
#define IRQ_SGA_IT 59
#define IRQ_USBM 61
#define IRQ_MSP1 63
#define IRQ_WATCHDOG (IRQ_VIC_START+0)
#define IRQ_SOFTINT (IRQ_VIC_START+1)
#define IRQ_CRYPTO (IRQ_VIC_START+2)
#define IRQ_OWM (IRQ_VIC_START+3)
#define IRQ_MTU0 (IRQ_VIC_START+4)
#define IRQ_MTU1 (IRQ_VIC_START+5)
#define IRQ_GPIO0 (IRQ_VIC_START+6)
#define IRQ_GPIO1 (IRQ_VIC_START+7)
#define IRQ_GPIO2 (IRQ_VIC_START+8)
#define IRQ_GPIO3 (IRQ_VIC_START+9)
#define IRQ_RTC_RTT (IRQ_VIC_START+10)
#define IRQ_SSP (IRQ_VIC_START+11)
#define IRQ_UART0 (IRQ_VIC_START+12)
#define IRQ_DMA1 (IRQ_VIC_START+13)
#define IRQ_CLCD_MDIF (IRQ_VIC_START+14)
#define IRQ_DMA0 (IRQ_VIC_START+15)
#define IRQ_PWRFAIL (IRQ_VIC_START+16)
#define IRQ_UART1 (IRQ_VIC_START+17)
#define IRQ_FIRDA (IRQ_VIC_START+18)
#define IRQ_MSP0 (IRQ_VIC_START+19)
#define IRQ_I2C0 (IRQ_VIC_START+20)
#define IRQ_I2C1 (IRQ_VIC_START+21)
#define IRQ_SDMMC (IRQ_VIC_START+22)
#define IRQ_USBOTG (IRQ_VIC_START+23)
#define IRQ_SVA_IT0 (IRQ_VIC_START+24)
#define IRQ_SVA_IT1 (IRQ_VIC_START+25)
#define IRQ_SAA_IT0 (IRQ_VIC_START+26)
#define IRQ_SAA_IT1 (IRQ_VIC_START+27)
#define IRQ_UART2 (IRQ_VIC_START+28)
#define IRQ_MSP2 (IRQ_VIC_START+29)
#define IRQ_L2CC (IRQ_VIC_START+30)
#define IRQ_HPI (IRQ_VIC_START+31)
#define IRQ_SKE (IRQ_VIC_START+32)
#define IRQ_KP (IRQ_VIC_START+33)
#define IRQ_MEMST (IRQ_VIC_START+34)
#define IRQ_SGA_IT (IRQ_VIC_START+35)
#define IRQ_USBM (IRQ_VIC_START+36)
#define IRQ_MSP1 (IRQ_VIC_START+37)
#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)

View file

@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o
serial.o devices.o dma.o fb.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)

View file

@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_usb_config ams_delta_usb_config = {
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,

80
arch/arm/mach-omap1/fb.c Normal file
View file

@ -0,0 +1,80 @@
/*
* File: arch/arm/plat-omap/fb.c
*
* Framebuffer device registration for TI OMAP platforms
*
* Copyright (C) 2006 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
#include <linux/io.h>
#include <linux/omapfb.h>
#include <linux/dma-mapping.h>
#include <asm/mach/map.h>
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
static struct omapfb_platform_data omapfb_config;
static u64 omap_fb_dma_mask = ~(u32)0;
static struct platform_device omap_fb_device = {
.name = "omapfb",
.id = -1,
.dev = {
.dma_mask = &omap_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &omapfb_config,
},
.num_resources = 0,
};
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
omapfb_config.lcd = *config;
omapfb_lcd_configured = true;
}
static int __init omap_init_fb(void)
{
/*
* If the board file has not set the lcd config with
* omapfb_set_lcd_config(), don't bother registering the omapfb device
*/
if (!omapfb_lcd_configured)
return 0;
return platform_device_register(&omap_fb_device);
}
arch_initcall(omap_init_fb);
#else
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
}
#endif

View file

@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = {
static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
static int __devinit omap1_mbox_probe(struct platform_device *pdev)
static int omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
return 0;
}
static int __devexit omap1_mbox_remove(struct platform_device *pdev)
static int omap1_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister();
iounmap(mbox_base);
@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev)
static struct platform_driver omap1_mbox_driver = {
.probe = omap1_mbox_probe,
.remove = __devexit_p(omap1_mbox_remove),
.remove = omap1_mbox_remove,
.driver = {
.name = "omap-mailbox",
},

View file

@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
#endif
void __init omap1_usb_init(struct omap_usb_config *pdata)
void __init omap1_usb_init(struct omap_usb_config *_pdata)
{
struct omap_usb_config *pdata;
pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return;
pdata->usb0_init = omap1_usb0_init;
pdata->usb1_init = omap1_usb1_init;
pdata->usb2_init = omap1_usb2_init;

View file

@ -3,7 +3,7 @@
#
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o sram.o

View file

@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
.enable = &omap2_clkops_enable_clkdm,
.disable = &omap2_clkops_disable_clkdm,
};
static struct clk emu_src_ck;

View file

@ -234,7 +234,7 @@
#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
/* 34xx GENERAL_WKUP regist offsets */
/* 34xx GENERAL_WKUP register offsets */
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)

View file

@ -504,8 +504,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
if (!freqsel)
WARN_ON(1);
WARN_ON(!freqsel);
}
pr_debug("%s: %s: set rate: locking rate to %lu.\n",

View file

@ -27,7 +27,6 @@
#include "omap_device.h"
#include "omap_hwmod.h"
#include <plat/cpu.h>
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)

View file

@ -31,8 +31,7 @@
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
#include <plat/cpu.h>
#include "soc.h"
#include "dss-common.h"
#include "mux.h"

View file

@ -1,6 +1,4 @@
/*
* File: arch/arm/plat-omap/fb.c
*
* Framebuffer device registration for TI OMAP platforms
*
* Copyright (C) 2006 Nokia Corporation
@ -33,7 +31,7 @@
#include <asm/mach/map.h>
#include <plat/cpu.h>
#include "soc.h"
#ifdef CONFIG_OMAP2_VRFB
@ -94,45 +92,7 @@ static int __init omap_init_vrfb(void)
arch_initcall(omap_init_vrfb);
#endif
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
static struct omapfb_platform_data omapfb_config;
static u64 omap_fb_dma_mask = ~(u32)0;
static struct platform_device omap_fb_device = {
.name = "omapfb",
.id = -1,
.dev = {
.dma_mask = &omap_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &omapfb_config,
},
.num_resources = 0,
};
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
omapfb_config.lcd = *config;
omapfb_lcd_configured = true;
}
static int __init omap_init_fb(void)
{
/*
* If the board file has not set the lcd config with
* omapfb_set_lcd_config(), don't bother registering the omapfb device
*/
if (!omapfb_lcd_configured)
return 0;
return platform_device_register(&omap_fb_device);
}
arch_initcall(omap_init_fb);
#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static u64 omap_fb_dma_mask = ~(u32)0;
static struct omapfb_platform_data omapfb_config;
@ -155,10 +115,4 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
#else
void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
}
#endif

View file

@ -744,7 +744,7 @@ static int gpmc_setup_irq(void)
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
}
static __devexit int gpmc_free_irq(void)
static int gpmc_free_irq(void)
{
int i;
@ -762,7 +762,7 @@ static __devexit int gpmc_free_irq(void)
return 0;
}
static void __devexit gpmc_mem_exit(void)
static void gpmc_mem_exit(void)
{
int cs;
@ -774,7 +774,7 @@ static void __devexit gpmc_mem_exit(void)
}
static int __devinit gpmc_mem_init(void)
static int gpmc_mem_init(void)
{
int cs, rc;
unsigned long boot_rom_space = 0;
@ -1121,7 +1121,7 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
return 0;
}
static __devinit int gpmc_probe(struct platform_device *pdev)
static int gpmc_probe(struct platform_device *pdev)
{
int rc;
u32 l;
@ -1177,7 +1177,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
return 0;
}
static __devexit int gpmc_remove(struct platform_device *pdev)
static int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
@ -1187,7 +1187,7 @@ static __devexit int gpmc_remove(struct platform_device *pdev)
static struct platform_driver gpmc_driver = {
.probe = gpmc_probe,
.remove = __devexit_p(gpmc_remove),
.remove = gpmc_remove,
.driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,

View file

@ -342,7 +342,7 @@ struct omap_mbox mbox_2_info = {
struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
#endif
static int __devinit omap2_mbox_probe(struct platform_device *pdev)
static int omap2_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
@ -395,7 +395,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
return 0;
}
static int __devexit omap2_mbox_remove(struct platform_device *pdev)
static int omap2_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister();
iounmap(mbox_base);
@ -404,7 +404,7 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
static struct platform_driver omap2_mbox_driver = {
.probe = omap2_mbox_probe,
.remove = __devexit_p(omap2_mbox_remove),
.remove = omap2_mbox_remove,
.driver = {
.name = "omap-mailbox",
},

View file

@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
{ .irq = -1 + OMAP_INTC_START, },
{ .irq = -1, },
};
static struct omap_hwmod am33xx_usbss_hwmod = {
@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
.user = OCP_USER_MPU,
};
struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
{
.pa_start = 0x4A101000,
.pa_end = 0x4A101000 + SZ_256 - 1,
@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
{ }
};
struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
.master = &am33xx_cpgmac0_hwmod,
.slave = &am33xx_mdio_hwmod,
.addr = am33xx_mdio_addr_space,

View file

@ -26,7 +26,6 @@
#include <linux/omap-dma.h>
#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/iommu-omap.h>

View file

@ -292,8 +292,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
if (twl_sr_enable_autoinit)
pr_warning("%s: unexpected multiple calls\n", __func__);
ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
TWL4030_DCDC_GLOBAL_CFG);
ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
TWL4030_DCDC_GLOBAL_CFG);
if (ret)
goto err;
@ -302,8 +302,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
else
temp &= ~SMARTREFLEX_ENABLE;
ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
TWL4030_DCDC_GLOBAL_CFG);
ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
TWL4030_DCDC_GLOBAL_CFG);
if (!ret) {
twl_sr_enable_autoinit = true;
return 0;

View file

@ -11,8 +11,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/pm_runtime.h>
#include <asm/pmu.h>
#include "soc.h"

Some files were not shown because too many files have changed in this diff Show more