MN10300: Allow some cacheflushes to be avoided if cache snooping is available

The AM34 core is able to do cache snooping, and so can skip some of the cache
flushing.

Signed-off-by: David Howells <dhowells@redhat.com>
This commit is contained in:
David Howells 2010-10-27 17:28:46 +01:00
parent 9731d23710
commit b478491f26
9 changed files with 309 additions and 96 deletions

View file

@ -18,6 +18,7 @@ config AM33_3
config AM34_2 config AM34_2
def_bool n def_bool n
select MN10300_HAS_ATOMIC_OPS_UNIT select MN10300_HAS_ATOMIC_OPS_UNIT
select MN10300_HAS_CACHE_SNOOP
config MMU config MMU
def_bool y def_bool y

View file

@ -131,18 +131,22 @@ extern void mn10300_dcache_flush_inv_range2(unsigned long start, unsigned long s
/* /*
* Physically-indexed cache management * Physically-indexed cache management
*/ */
#ifdef CONFIG_MN10300_CACHE_ENABLED #if defined(CONFIG_MN10300_CACHE_FLUSH_ICACHE)
extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
extern void flush_icache_range(unsigned long start, unsigned long end);
#elif defined(CONFIG_MN10300_CACHE_INV_ICACHE)
static inline void flush_icache_page(struct vm_area_struct *vma,
struct page *page)
{
mn10300_icache_inv_page(page_to_phys(page));
}
extern void flush_icache_range(unsigned long start, unsigned long end); extern void flush_icache_range(unsigned long start, unsigned long end);
extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
#else #else
#define flush_icache_range(start, end) do {} while (0) #define flush_icache_range(start, end) do {} while (0)
#define flush_icache_page(vma, pg) do {} while (0) #define flush_icache_page(vma, pg) do {} while (0)
#endif #endif
#define flush_icache_user_range(vma, pg, adr, len) \ #define flush_icache_user_range(vma, pg, adr, len) \
flush_icache_range(adr, adr + len) flush_icache_range(adr, adr + len)

View file

@ -377,8 +377,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
void __kprobes arch_disarm_kprobe(struct kprobe *p) void __kprobes arch_disarm_kprobe(struct kprobe *p)
{ {
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush(); mn10300_dcache_flush();
mn10300_icache_inv(); mn10300_icache_inv();
#endif
} }
void arch_remove_kprobe(struct kprobe *p) void arch_remove_kprobe(struct kprobe *p)
@ -390,8 +392,10 @@ void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
{ {
*p->addr = p->opcode; *p->addr = p->opcode;
regs->pc = (unsigned long) p->addr; regs->pc = (unsigned long) p->addr;
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush(); mn10300_dcache_flush();
mn10300_icache_inv(); mn10300_icache_inv();
#endif
} }
static inline static inline

View file

@ -533,8 +533,10 @@ void __init set_intr_stub(enum exception_code code, void *handler)
vector[6] = 0xcb; vector[6] = 0xcb;
vector[7] = 0xcb; vector[7] = 0xcb;
#ifndef CONFIG_MN10300_CACHE_SNOOP
mn10300_dcache_flush_inv(); mn10300_dcache_flush_inv();
mn10300_icache_inv(); mn10300_icache_inv();
#endif
} }
/* /*

View file

@ -22,12 +22,26 @@ choice
config MN10300_CACHE_WBACK config MN10300_CACHE_WBACK
bool "Write-Back" bool "Write-Back"
help
The dcache operates in delayed write-back mode. It must be manually
flushed if writes are made that subsequently need to be executed or
to be DMA'd by a device.
config MN10300_CACHE_WTHRU config MN10300_CACHE_WTHRU
bool "Write-Through" bool "Write-Through"
help
The dcache operates in immediate write-through mode. Writes are
committed to RAM immediately in addition to being stored in the
cache. This means that the written data is immediately available for
execution or DMA.
This is not available for use with an SMP kernel if cache flushing
and invalidation by automatic purge register is not selected.
config MN10300_CACHE_DISABLED config MN10300_CACHE_DISABLED
bool "Disabled" bool "Disabled"
help
The icache and dcache are disabled.
endchoice endchoice
@ -64,3 +78,23 @@ config MN10300_CACHE_FLUSH_BY_TAG
config MN10300_CACHE_FLUSH_BY_REG config MN10300_CACHE_FLUSH_BY_REG
def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK def_bool y if MN10300_CACHE_MANAGE_BY_REG && MN10300_CACHE_WBACK
config MN10300_HAS_CACHE_SNOOP
def_bool n
config MN10300_CACHE_SNOOP
bool "Use CPU Cache Snooping"
depends on MN10300_CACHE_ENABLED && MN10300_HAS_CACHE_SNOOP
default y
config MN10300_CACHE_FLUSH_ICACHE
def_bool y if MN10300_CACHE_WBACK && !MN10300_CACHE_SNOOP
help
Set if we need the dcache flushing before the icache is invalidated.
config MN10300_CACHE_INV_ICACHE
def_bool y if MN10300_CACHE_WTHRU && !MN10300_CACHE_SNOOP
help
Set if we need the icache to be invalidated, even if the dcache is in
write-through mode and doesn't need flushing.

View file

@ -3,6 +3,8 @@
# #
cacheflush-y := cache.o cacheflush-y := cache.o
cacheflush-$(CONFIG_MN10300_CACHE_INV_ICACHE) += cache-inv-icache.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_ICACHE) += cache-flush-icache.o
cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_TAG) += cache-inv-by-tag.o
cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o
cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o

View file

@ -0,0 +1,137 @@
/* Flush dcache and invalidate icache when the dcache is in writeback mode
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
/**
* flush_icache_page - Flush a page from the dcache and invalidate the icache
* @vma: The VMA the page is part of.
* @page: The page to be flushed.
*
* Write a page back from the dcache and invalidate the icache so that we can
* run code from it that we've just written into it
*/
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
unsigned long start = page_to_phys(page);
mn10300_dcache_flush_page(start);
mn10300_icache_inv_page(start);
}
EXPORT_SYMBOL(flush_icache_page);
/**
* flush_icache_page_range - Flush dcache and invalidate icache for part of a
* single page
* @start: The starting virtual address of the page part.
* @end: The ending virtual address of the page part.
*
* Flush the dcache and invalidate the icache for part of a single page, as
* determined by the virtual addresses given. The page must be in the paged
* area.
*/
static void flush_icache_page_range(unsigned long start, unsigned long end)
{
unsigned long addr, size, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
/* work out how much of the page to flush */
off = start & ~PAGE_MASK;
size = end - start;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
return;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
return;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
return;
ppte = pte_offset_map(pmd, start);
if (!ppte)
return;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
return;
page = pte_page(pte);
if (!page)
return;
addr = page_to_phys(page);
/* flush the dcache and invalidate the icache coverage on that
* region */
mn10300_dcache_flush_range2(addr + off, size);
mn10300_icache_inv_range2(addr + off, size);
}
/**
* flush_icache_range - Globally flush dcache and invalidate icache for region
* @start: The starting virtual address of the region.
* @end: The ending virtual address of the region.
*
* This is used by the kernel to globally flush some code it has just written
* from the dcache back to RAM and then to globally invalidate the icache over
* that region so that that code can be run on all CPUs in the system.
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long start_page, end_page;
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
return;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses
* directly */
start_page = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_dcache_flush_range(start_page, end);
mn10300_icache_inv_range(start_page, end);
if (start_page == start)
return;
end = start_page;
}
start_page = start & PAGE_MASK;
end_page = end & PAGE_MASK;
if (start_page == end_page) {
/* the first and last bytes are on the same page */
flush_icache_page_range(start, end);
} else if (start_page + 1 == end_page) {
/* split over two virtually contiguous pages */
flush_icache_page_range(start, end_page);
flush_icache_page_range(end_page, end);
} else {
/* more than 2 pages; just flush the entire cache */
mn10300_dcache_flush();
mn10300_icache_inv();
}
}
EXPORT_SYMBOL(flush_icache_range);

View file

@ -0,0 +1,119 @@
/* Invalidate icache when dcache doesn't need invalidation as it's in
* write-through mode
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
/**
* flush_icache_page_range - Flush dcache and invalidate icache for part of a
* single page
* @start: The starting virtual address of the page part.
* @end: The ending virtual address of the page part.
*
* Invalidate the icache for part of a single page, as determined by the
* virtual addresses given. The page must be in the paged area. The dcache is
* not flushed as the cache must be in write-through mode to get here.
*/
static void flush_icache_page_range(unsigned long start, unsigned long end)
{
unsigned long addr, size, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
/* work out how much of the page to flush */
off = start & ~PAGE_MASK;
size = end - start;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
return;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
return;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
return;
ppte = pte_offset_map(pmd, start);
if (!ppte)
return;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
return;
page = pte_page(pte);
if (!page)
return;
addr = page_to_phys(page);
/* invalidate the icache coverage on that region */
mn10300_icache_inv_range2(addr + off, size);
}
/**
* flush_icache_range - Globally flush dcache and invalidate icache for region
* @start: The starting virtual address of the region.
* @end: The ending virtual address of the region.
*
* This is used by the kernel to globally flush some code it has just written
* from the dcache back to RAM and then to globally invalidate the icache over
* that region so that that code can be run on all CPUs in the system.
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
unsigned long start_page, end_page;
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
return;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses
* directly */
start_page = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_dcache_flush_range(start_page, end);
mn10300_icache_inv_range(start_page, end);
if (start_page == start)
return;
end = start_page;
}
start_page = start & PAGE_MASK;
end_page = end & PAGE_MASK;
if (start_page == end_page) {
/* the first and last bytes are on the same page */
flush_icache_page_range(start, end);
} else if (start_page + 1 == end_page) {
/* split over two virtually contiguous pages */
flush_icache_page_range(start, end_page);
flush_icache_page_range(end_page, end);
} else {
/* more than 2 pages; just flush the entire cache */
mn10300_icache_inv();
}
}
EXPORT_SYMBOL(flush_icache_range);

View file

@ -36,96 +36,6 @@ EXPORT_SYMBOL(mn10300_dcache_flush_range2);
EXPORT_SYMBOL(mn10300_dcache_flush_page); EXPORT_SYMBOL(mn10300_dcache_flush_page);
#endif #endif
/*
* write a page back from the dcache and invalidate the icache so that we can
* run code from it that we've just written into it
*/
void flush_icache_page(struct vm_area_struct *vma, struct page *page)
{
mn10300_dcache_flush_page(page_to_phys(page));
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_page);
/*
* write some code we've just written back from the dcache and invalidate the
* icache so that we can run that code
*/
void flush_icache_range(unsigned long start, unsigned long end)
{
#ifdef CONFIG_MN10300_CACHE_WBACK
unsigned long addr, size, base, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
if (end > 0x80000000UL) {
/* addresses above 0xa0000000 do not go through the cache */
if (end > 0xa0000000UL) {
end = 0xa0000000UL;
if (start >= end)
return;
}
/* kernel addresses between 0x80000000 and 0x9fffffff do not
* require page tables, so we just map such addresses directly */
base = (start >= 0x80000000UL) ? start : 0x80000000UL;
mn10300_dcache_flush_range(base, end);
if (base == start)
goto invalidate;
end = base;
}
for (; start < end; start += size) {
/* work out how much of the page to flush */
off = start & (PAGE_SIZE - 1);
size = end - start;
if (size > PAGE_SIZE - off)
size = PAGE_SIZE - off;
/* get the physical address the page is mapped to from the page
* tables */
pgd = pgd_offset(current->mm, start);
if (!pgd || !pgd_val(*pgd))
continue;
pud = pud_offset(pgd, start);
if (!pud || !pud_val(*pud))
continue;
pmd = pmd_offset(pud, start);
if (!pmd || !pmd_val(*pmd))
continue;
ppte = pte_offset_map(pmd, start);
if (!ppte)
continue;
pte = *ppte;
pte_unmap(ppte);
if (pte_none(pte))
continue;
page = pte_page(pte);
if (!page)
continue;
addr = page_to_phys(page);
/* flush the dcache and invalidate the icache coverage on that
* region */
mn10300_dcache_flush_range2(addr + off, size);
}
#endif
invalidate:
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_range);
/* /*
* allow userspace to flush the instruction cache * allow userspace to flush the instruction cache
*/ */